
Record-Breaking Results Bring Fusion Power Closer to Reality
The ribbon was a plasma inside Germany's Wendelstein 7-X, an advanced fusion reactor that set a record last May by magnetically 'bottling up' the superheated plasma for a whopping 43 seconds. That's many times longer than the device had achieved before.
It's often joked that fusion is only 30 years away—and always will be. But the latest results indicate that scientists and engineers are finally gaining on that prediction. 'I think it's probably now about 15 to 20 years [away],' says University of Cambridge nuclear engineer Tony Roulstone, who wasn't involved in the Wendelstein experiments. 'The superconducting magnets [that the researchers are using to contain the plasma] are making the difference.'
On supporting science journalism
If you're enjoying this article, consider supporting our award-winning journalism by subscribing. By purchasing a subscription you are helping to ensure the future of impactful stories about the discoveries and ideas shaping our world today.
And the latest Wendelstein result, while promising, has now been countered by British researchers. They say the large Joint European Torus (JET) fusion reactor near Oxford, England, achieved even longer containment times of up to 60 seconds in final experiments before its retirement in December 2023. These results have been kept quiet until now but are due to be published in a scientific journal soon.
According to a press release from the Max Planck Institute for Plasma Physics in Germany, the as yet unpublished data make the Wendelstein and JET reactors 'joint leaders' in the scientific quest to continually operate a fusion reactor at extremely high temperatures. Even so, the press release notes that JET's plasma volume was three times larger than that of the Wendelstein reactor, which would have given JET an advantage—a not-so-subtle insinuation that, all other things being equal, the German project should be considered the true leader.
This friendly rivalry highlights a long-standing competition between devices called stellarators, such as the Wendelstein 7-X, and others called tokamaks, such as JET. Both use different approaches to achieve a promising form of nuclear fusion called magnetic confinement, which aims to ignite a fusion reaction in a plasma of the neutron-heavy hydrogen isotopes deuterium and tritium.
The latest results come after the successful fusion ignition in 2022 at the National Ignition Facility (NIF) near San Francisco, which used a very different method of fusion called inertial confinement. Researchers there applied giant lasers to a pea-sized pellet of deuterium and tritium, triggering a fusion reaction that gave off more energy than it consumed. (Replications of the experiment have since yielded even more energy.)
The U.S. Department of Energy began constructing the NIF in the late 1990s, with the goal to develop inertial confinement as an alternative to testing thermonuclear bombs, and research for the U.S.'s nuclear arsenal still makes up most of the facility's work. But the ignition was an important milestone on the path toward controlled nuclear fusion—a 'holy grail' of science and engineering.
'The 2022 achievement of fusion ignition marks the first time humans have been able to demonstrate a controlled self-sustained burning fusion reaction in the laboratory—akin to lighting a match and that turning into a bonfire,' says plasma physicist Tammy Ma of the Lawrence Livermore National Laboratory, which operates the NIF. 'With every other fusion attempt prior, the lit match had fizzled.'
The inertial confinement method used by the NIF—the largest and most powerful laser system in the world—may not be best suited for generating electricity, however (although it seems unparalleled for simulating thermonuclear bombs). The ignition in the fuel pellet did give off more energy than put into it by the NIF's 192 giant lasers. But the lasers themselves took more than 12 hours to charge before the experiment and consumed roughly 100 times the energy released by the fusing pellet.
In contrast, calculations suggest a fusion power plant would have to ignite about 10 fuel pellets every second, continuously, for 24 hours a day to deliver utility-scale service. That's an immense engineering challenge but one accepted by several inertial fusion energy startups, such as Marvel Fusion in Germany; other start-ups, such as Xcimer Energy in the U.S., meanwhile, propose using a similar system to ignite just one fuel pellet every two seconds.
Ma admits that the NIF approach faces difficulties, but she points out it's still the only fusion method on Earth to have demonstrated a net energy gain: 'Fusion energy, and particularly the inertial confinement approach to fusion, has huge potential, and it is imperative that we pursue it,' she says.
Instead of igniting fuel pellets with lasers, most fusion power projects—like the Wendelstein 7-X and the JET reactor—have chosen a different path to nuclear fusion. Some of the most sophisticated, such as the giant ITER project being built in France, are tokamaks. These devices were first invented in the former Soviet Union and get their name from a Russian acronym for the doughnut-shaped rings of plasma they contain. They work by inducing a powerful electric current inside the superheated plasma doughnut to make it more magnetic and prevent it from striking and damaging the walls of the reactor chamber—the main challenge for the technology.
The Wendelstein 7-X reactor, however, is a stellarator—it uses a related, albeit more complicated, design that doesn't induce an electric current in the plasma but instead tries to control it with powerful external magnets alone. The result is that the plasmas in stellarators are more stable within their magnetic bottles. Reactors like the Wendelstein 7-X aim to operate for a longer period of time than tokamaks can without damaging the reactor chamber.
The Wendelstein researchers plan to soon exceed a minute and eventually to run the reactor continuously for more than half an hour. 'There's really nothing in the way to make it longer,' explains physicist Thomas Klinger, who leads the project at the Max Planck Institute for Plasma Physics. 'And then we are in an area where nobody has ever been before.'
The overlooked results from the JET reactor reinforce the magnetic confinement approach, although it's still not certain if tokamaks or stellarators will be the ultimate winner in the race for controlled nuclear fusion. Plasma physicist Robert Wolf, who heads the optimization of the Wendelstein reactor, thinks future fusion reactors might somehow combine the stability of stellarators with the relative simplicity of tokamaks, but it's not clear how: 'From a scientific view, it is still a bit early to say.'
Several private companies have joined the fusion race. One of the most advanced projects is from the Canadian firm General Fusion, which is based near Vancouver in British Columbia. The company hopes its unorthodox fusion reactor, which uses a hybrid technology called magnetized target fusion, or MTF, will be the first to feed electric power to the grid by the 'early to mid-2030s,' according to its chief strategy officer Megan Wilson. 'MTF is the fusion equivalent of a diesel engine: practical, durable and cost-effective,' she says.
University of California, San Diego, nuclear engineer George Tynan says private money is flooding the field: 'The private sector is now putting in much more money than governments, so that might change things," he says. 'In these 'hard tech' problems, like space travel and so on, the private sector seems to be more willing to take more risk.'
Tynan also cites Commonwealth Fusion Systems, a Massachusetts Institute of Technology spin-off that plans to build a fusion power plant called ARC in Virginia. The proposed ARC reactor is a type of compact tokamak that intends to start producing up to 400 megawatts of electricity—enough to power about 150,000 homes—in the 'early 2030s,' according to a MIT News article.
Roulstone thinks the superconducting electromagnets increasingly used in magnetic confinement reactors will prove to be a key technology. Such magnets are cooled with liquid helium to a few degrees above absolute zero so that they have no electrical resistance. The magnetic fields they create in that state are many times more powerful than those created by regular electromagnets, so they give researchers greater control over superheated hydrogen plasmas. In contrast, Roulstone fears the NIF's laser approach to fusion may be too complicated: 'I am a skeptic about whether inertial confinement will work,' he says.
Tynan, too, is cautious about inertial confinement fusion, although he recognizes that NIF's fusion ignition was a scientific breakthrough: 'it demonstrates that one can produce net energy gain from a fusion reaction.'
He sees 'viable physics' in both the magnet and laser approaches to nuclear fusion but warns that both ideas still face many years of experimentation and testing before they can be used to generate electricity. 'Both approaches still have significant engineering challenges,' Tynan says. 'I think it is plausible that both can work, but they both have a long way to go.'
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
2 hours ago
- Yahoo
Record-Breaking Results Bring Fusion Power Closer to Reality
A twisting ribbon of hydrogen gas, many times hotter than the surface of the sun, has given scientists a tentative glimpse of the future of controlled nuclear fusion—a so-far theoretical source of relatively 'clean' and abundant energy that would be effectively fueled by seawater. The ribbon was a plasma inside Germany's Wendelstein 7-X, an advanced fusion reactor that set a record last May by magnetically 'bottling up' the superheated plasma for a whopping 43 seconds. That's many times longer than the device had achieved before. It's often joked that fusion is only 30 years away—and always will be. But the latest results indicate that scientists and engineers are finally gaining on that prediction. 'I think it's probably now about 15 to 20 years [away],' says University of Cambridge nuclear engineer Tony Roulstone, who wasn't involved in the Wendelstein experiments. 'The superconducting magnets [that the researchers are using to contain the plasma] are making the difference.' [Sign up for Today in Science, a free daily newsletter] And the latest Wendelstein result, while promising, has now been countered by British researchers. They say the large Joint European Torus (JET) fusion reactor near Oxford, England, achieved even longer containment times of up to 60 seconds in final experiments before its retirement in December 2023. These results have been kept quiet until now but are due to be published in a scientific journal soon. According to a press release from the Max Planck Institute for Plasma Physics in Germany, the as yet unpublished data make the Wendelstein and JET reactors 'joint leaders' in the scientific quest to continually operate a fusion reactor at extremely high temperatures. Even so, the press release notes that JET's plasma volume was three times larger than that of the Wendelstein reactor, which would have given JET an advantage—a not-so-subtle insinuation that, all other things being equal, the German project should be considered the true leader. This friendly rivalry highlights a long-standing competition between devices called stellarators, such as the Wendelstein 7-X, and others called tokamaks, such as JET. Both use different approaches to achieve a promising form of nuclear fusion called magnetic confinement, which aims to ignite a fusion reaction in a plasma of the neutron-heavy hydrogen isotopes deuterium and tritium. The latest results come after the successful fusion ignition in 2022 at the National Ignition Facility (NIF) near San Francisco, which used a very different method of fusion called inertial confinement. Researchers there applied giant lasers to a pea-sized pellet of deuterium and tritium, triggering a fusion reaction that gave off more energy than it consumed. (Replications of the experiment have since yielded even more energy.) The U.S. Department of Energy began constructing the NIF in the late 1990s, with the goal to develop inertial confinement as an alternative to testing thermonuclear bombs, and research for the U.S.'s nuclear arsenal still makes up most of the facility's work. But the ignition was an important milestone on the path toward controlled nuclear fusion—a 'holy grail' of science and engineering. 'The 2022 achievement of fusion ignition marks the first time humans have been able to demonstrate a controlled self-sustained burning fusion reaction in the laboratory—akin to lighting a match and that turning into a bonfire,' says plasma physicist Tammy Ma of the Lawrence Livermore National Laboratory, which operates the NIF. 'With every other fusion attempt prior, the lit match had fizzled.' The inertial confinement method used by the NIF—the largest and most powerful laser system in the world—may not be best suited for generating electricity, however (although it seems unparalleled for simulating thermonuclear bombs). The ignition in the fuel pellet did give off more energy than put into it by the NIF's 192 giant lasers. But the lasers themselves took more than 12 hours to charge before the experiment and consumed roughly 100 times the energy released by the fusing pellet. In contrast, calculations suggest a fusion power plant would have to ignite about 10 fuel pellets every second, continuously, for 24 hours a day to deliver utility-scale service. That's an immense engineering challenge but one accepted by several inertial fusion energy startups, such as Marvel Fusion in Germany; other start-ups, such as Xcimer Energy in the U.S., meanwhile, propose using a similar system to ignite just one fuel pellet every two seconds. Ma admits that the NIF approach faces difficulties, but she points out it's still the only fusion method on Earth to have demonstrated a net energy gain: 'Fusion energy, and particularly the inertial confinement approach to fusion, has huge potential, and it is imperative that we pursue it,' she says. Instead of igniting fuel pellets with lasers, most fusion power projects—like the Wendelstein 7-X and the JET reactor—have chosen a different path to nuclear fusion. Some of the most sophisticated, such as the giant ITER project being built in France, are tokamaks. These devices were first invented in the former Soviet Union and get their name from a Russian acronym for the doughnut-shaped rings of plasma they contain. They work by inducing a powerful electric current inside the superheated plasma doughnut to make it more magnetic and prevent it from striking and damaging the walls of the reactor chamber—the main challenge for the technology. The Wendelstein 7-X reactor, however, is a stellarator—it uses a related, albeit more complicated, design that doesn't induce an electric current in the plasma but instead tries to control it with powerful external magnets alone. The result is that the plasmas in stellarators are more stable within their magnetic bottles. Reactors like the Wendelstein 7-X aim to operate for a longer period of time than tokamaks can without damaging the reactor chamber. The Wendelstein researchers plan to soon exceed a minute and eventually to run the reactor continuously for more than half an hour. 'There's really nothing in the way to make it longer,' explains physicist Thomas Klinger, who leads the project at the Max Planck Institute for Plasma Physics. 'And then we are in an area where nobody has ever been before.' The overlooked results from the JET reactor reinforce the magnetic confinement approach, although it's still not certain if tokamaks or stellarators will be the ultimate winner in the race for controlled nuclear fusion. Plasma physicist Robert Wolf, who heads the optimization of the Wendelstein reactor, thinks future fusion reactors might somehow combine the stability of stellarators with the relative simplicity of tokamaks, but it's not clear how: 'From a scientific view, it is still a bit early to say.' Several private companies have joined the fusion race. One of the most advanced projects is from the Canadian firm General Fusion, which is based near Vancouver in British Columbia. The company hopes its unorthodox fusion reactor, which uses a hybrid technology called magnetized target fusion, or MTF, will be the first to feed electric power to the grid by the 'early to mid-2030s,' according to its chief strategy officer Megan Wilson. 'MTF is the fusion equivalent of a diesel engine: practical, durable and cost-effective,' she says. University of California, San Diego, nuclear engineer George Tynan says private money is flooding the field: 'The private sector is now putting in much more money than governments, so that might change things," he says. 'In these 'hard tech' problems, like space travel and so on, the private sector seems to be more willing to take more risk.' Tynan also cites Commonwealth Fusion Systems, a Massachusetts Institute of Technology spin-off that plans to build a fusion power plant called ARC in Virginia. The proposed ARC reactor is a type of compact tokamak that intends to start producing up to 400 megawatts of electricity—enough to power about 150,000 homes—in the 'early 2030s,' according to a MIT News article. Roulstone thinks the superconducting electromagnets increasingly used in magnetic confinement reactors will prove to be a key technology. Such magnets are cooled with liquid helium to a few degrees above absolute zero so that they have no electrical resistance. The magnetic fields they create in that state are many times more powerful than those created by regular electromagnets, so they give researchers greater control over superheated hydrogen plasmas. In contrast, Roulstone fears the NIF's laser approach to fusion may be too complicated: 'I am a skeptic about whether inertial confinement will work,' he says. Tynan, too, is cautious about inertial confinement fusion, although he recognizes that NIF's fusion ignition was a scientific breakthrough: 'it demonstrates that one can produce net energy gain from a fusion reaction.' He sees 'viable physics' in both the magnet and laser approaches to nuclear fusion but warns that both ideas still face many years of experimentation and testing before they can be used to generate electricity. 'Both approaches still have significant engineering challenges,' Tynan says. 'I think it is plausible that both can work, but they both have a long way to go.'

Miami Herald
3 hours ago
- Miami Herald
UK launches bid to build spaceship to clean up space junk
By Elizabeth Hunter The UK has launched a £75.6 million bid to build a spaceship to clear space debris, including satellites. Officials say the major new procurement process will tackle the growing threat of defunct man-made items from orbit. The UK Space Agency is initiating a £75.6 million tender for the nation's first mission to actively remove defunct satellites from space. They say it marks a pivotal step in the UK's efforts to protect vital space infrastructure and ensure the long-term safety of the orbital environment. At the heart of the proposed Active Debris Removal (ADR) mission, a specially designed spacecraft, equipped with cutting-edge British robotic and autonomous navigation technology, will capture and safely de-orbit two non-functioning UK-licensed satellites from low Earth orbit. The spacecraft will guide the defunct satellites into Earth's atmosphere, where they will burn up-eliminating potential threats to the satellite networks that power essential services such as GPS, weather forecasting, and emergency communications. There are an estimated 140 million pieces of space debris smaller than 1cm, and over 54,000 tracked objects larger than 10cm currently orbiting Earth. Even tiny fragments can cause catastrophic damage to satellites. This mission is a critical step in addressing the threat of space debris, ensuring the long-term sustainability of space operations and protecting the infrastructure that underpins modern life. Minister for Space, Sir Chris Bryant, said: "This mission is a direct example of our Plan for Change in action, delivering innovation, sustainability and economic opportunity through bold investment in future technologies. "By tackling the growing threat of space debris head-on, we are protecting the infrastructure that supports everything from national security to everyday connectivity whilst also creating high-skilled jobs and securing the UK's leadership in the growing space economy." The tender process secures home-grown expertise and strengthens the UK's leadership in the rapidly advancing field of In-orbit Servicing, Assembly and Manufacturing (ISAM). It supports the ambitions of the Modern Industrial Strategy 2025, a 10-year plan to grow future industries, attract private investment, and establish the UK as a global innovation leader. Through this tender, the UK Space Agency is targeting funding on one of the five priority capabilities highlighted for investment in the space chapter of the Advanced Manufacturing Sector Plan. This also represents a shift in the UK Space Agency's approach, from traditional grants to competitive contracts, designed to stimulate private investment and create high-skilled jobs across the country. Dr. Paul Bate, CEO of the UK Space Agency, said: "Actively clearing space debris is a bold step toward a safer, more sustainable orbital environment." "This mission showcases the UK's technical excellence and our commitment to protecting the space systems that modern life depends on. ''It's about securing the future of space for everyone, delivering tangible benefits here on Earth, and positioning the UK at the forefront of the in-orbit services market." The UK Space Agency is now seeking a single supplier to deliver the five-year research and development contract, with the mission targeted for launch by the end of 2028. This follows £11 million already invested since 2021 in feasibility studies and design work, underscoring the government's long-term commitment to becoming a clean space superpower. Joanne Wheeler, Director of the Earth & Space Sustainability Initiative, said: "ESSI is very encouraged by this announcement. ''For the past three years, we have been developing sets of Space Sustainability Principles that will facilitate the establishment of the Space Sustainability Standards to ultimately ensure the sustainable use of outer space, covering the lifecycle of a satellite – from launch to decommissioning. ''The proposed ADR mission is a significant step in the right direction to achieving such sustainability and governance of ISAM activities, which the UK can lead on." UK businesses, researchers, and satellite users stand to benefit from this ambitious initiative, which will strengthen international partnerships, drive economic growth, and help establish global standards for sustainable space operations. Colin Baldwin, Executive Director at UKspace, said, "Debris is one of the key factors in planning the future of low Earth orbit. The UK leads in the development of solutions to address this critical market enabler. ''A number of our members are engaged in this exciting new market, which is developing rapidly. ''We welcome the UK Space Agency's ongoing commitment to growing the UK's capabilities through the launch of this new procurement." Jennifer Jordan-Saifi, CEO of the Sustainable Markets Initiative, says: "Sustainability is no longer solely an Earth-bound mission. ''The space economy is growing at pace and at scale, therefore as we build the foundations to become multiplanetary, it's critical we carry lessons of stewardship to the stars. ''We applaud the UK Space Agency's leadership in addressing the issue of space debris." The post UK launches bid to build spaceship to clean up space junk appeared first on Talker. Copyright Talker News. All Rights Reserved.
Yahoo
6 hours ago
- Yahoo
Everything we've learnt from first DNA of ancient Egyptian
The first complete DNA study of an Ancient Egyptian has revealed he was probably a celebrated potter who was given an oddly luxurious burial. The skeleton of a middle-aged man, who lived between 4,500 and 4,800 years ago, was found crammed into a ceramic pot in a tomb cut into the hillside at Nuwayrat, around 165 miles south of Cairo. He lived during the Fourth Dynasty, an important time when the first and greatest pyramids were constructed, under the reign of pharaohs such as Khufu and Khafre. Until now it has been difficult to sequence DNA in Ancient Egyptians because the mummification process destroys the delicate molecule. However, the man's burial took place before mummification became standard practice in Egypt and his body was instead preserved by the warm and dry conditions of the desert. This allowed British experts from the Francis Crick Institute and Liverpool John Moores University to extract DNA from a tooth root. The remains showed severe signs of arthritis and suggested he had spent many years sitting on a hard surface with his arms and legs outstretched and his head bent over. Joel Irish, professor of dental anthropology and archaeology at Liverpool John Moores University (LJMU) said: 'Though circumstantial, these clues point towards pottery, including use of a pottery wheel, which arrived in Egypt around the same time. 'That said, his higher-class burial is not expected for a potter, who would not normally receive such treatment. 'He was in an upper class burial. Someone went to all the work to put him in a rock cut tomb and he was in this large pottery vessel. That is at odds with the fact he had an incredibly hard physical life. 'Perhaps he was exceptionally skilled or successful enough to advance his social status.' The man's DNA showed that most of his ancestry came from North Africa, but around 20 per cent was related to ancient individuals from the Fertile Crescent – an area of West Asia encompassing modern-day countries such as Iraq, Iran and Jordan. While archaeological evidence has shown that trade and cultural connections existed between Egypt and the Fertile Crescent, this is the first evidence that populations were also interbreeding. Researchers have speculated that the man may have been one of the first to use a pottery wheel, which was invented in Mesopotamia and then brought to Egypt by the Fourth Dynasty. Before that pots were made with the coiled method, so it is possible his high status at death was linked to his ability to use the new technology. His skeleton was excavated in 1902 and donated to World Museum Liverpool, where it later survived bombings during the Blitz that destroyed most of the museum's human remains collection. Linus Girdland Flink, a lecturer in ancient biomolecules at the University of Aberdeen and visiting researcher at LJMU said: 'This individual has been on an extraordinary journey. He lived and died during a critical period of change in ancient Egypt. 'We've now been able to tell part of the individual's story, finding that some of his ancestry came from the Fertile Crescent, highlighting the mixture between groups at this time.' Adeline Morez Jacobs, visiting research fellow at LJMU, added: 'This finding was quite interesting because we know from archaeology that Egyptian and fertile crescent culture influenced each other for millennia. Farming practices and precious goods were shared and the first writing system emerged almost contemporaneously influenced by each other. 'Piecing together all the clues from this individual's DNA, bones and teeth have allowed us to build a comprehensive picture.' The research was published in the journal Nature. Broaden your horizons with award-winning British journalism. Try The Telegraph free for 1 month with unlimited access to our award-winning website, exclusive app, money-saving offers and more.