Clearwater condo residents could be displaced for days after evacuations ordered
The Brief
Clearwater Beach condo residents are expecting to be out of their homes for days after evacuations were ordered on Tuesday.
First responders urgently evacuated 60 residents from the 12-story South Beach III condo building after a worker noticed a concrete support column had large cracks.
The building's milestone inspection from last year, which was just given to the city on Wednesday, said Karins Engineering did not find anything that would compromise the safety of the building for its intended use and occupancy.
CLEARWATER, Fla. - It could be days before residents of a Clearwater Beach condo are allowed back home, according to an email management sent to residents around noon on Wednesday.
The backstory
It comes after first responders urgently evacuated 60 residents from the 12-story South Beach III condo building on Tuesday. According to a spokesperson for the City of Clearwater, while permitted work was being done in the garage, a worker noticed one of the concrete support columns had large cracks and voids within it, causing concern for the structural integrity of the building.
RELATED: Evacuations ordered at Clearwater high-rise after structural crack discovered
Permits for work on the property located at 1460 Gulf Boulevard show crews were replacing part of the garage floor parking slab. According to the email sent to residents on Wednesday, the engineering company Karins Engineering is working with the City of Clearwater and the construction contractor Suncoast Restoration and Waterproofing to stabilize the building.
"They use steel struts and steel beams to kind of make sure that the column wasn't going to come down anymore and that the floor and roof was under control and supported," Division Chief of Emergency Management Jevon Graham for the City of Clearwater said about the process.
In a letter from the building's management, residents were told that they should plan to be out of their homes for the next 72-96 hours.
What's next
A spokesperson for Karins Engineering said on Wednesday they're also working hard to evaluate the building and decide on an appropriate repair plan. She wasn't able to say how long that will take.
Follow FOX 13 on YouTube
A city spokesperson said additional work is needed to complete "more substantial repairs." The city is relying on the property's professional structural engineers to guide the response and repair. Clearwater's building officials will not allow people back inside, though, until they review a report from a structural engineer, saying the structure is stable and safe.
Dig deeper
The building's milestone inspection from last year, which was just given to the city on Wednesday, said Karins Engineering did not find anything that would compromise the safety of the building for its intended use and occupancy. The city's spokesperson said the report was provided to the condo's Community Association in August and September 2024, but the city didn't have record of receiving the required building milestone inspection reports by the Dec. 31, 2024 deadline until Wednesday.
A state law put into place after the Surfside condo collapse in 2021 said aging condo buildings have to have structural inspections every 10 years. The report said the condo in Clearwater was built in 1978.
What they're saying
First responders said Surfside is always top of mind.
READ: Clearwater Ferry passengers refute statements from Jeffry Knight's attorney in aftermath of crash
"Any time you have a compromised structure, a support beam of this magnitude, you have to think about a possible collapse. So, our county support team, our different fire departments, our Pinellas County Tech team, our city tech team, fire departments from all across the county, the jurisdiction, all support it, gave staff to kind of help make sure … and you look at one, do you have support the structure, or two, are you going to deal with a search and rescue and demolition," Graham said.
A long-time owner told FOX 13 he feels safety protocols during a recent concrete restoration project were overlooked. He said he voiced those concerns to management in February 2024, but feels he wasn't heard.
The other side
FOX 13 reached out to the Community Association Property Manager and hadn't heard back at the time this article was published. The Red Cross is helping residents with a place to stay.
The Source
The information in this story was gathered by FOX 13's Kailey Tracy. It also includes previous information from FOX 13 news reports.
WATCH FOX 13 NEWS:
STAY CONNECTED WITH FOX 13 TAMPA:
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CNET
40 minutes ago
- CNET
Nope, That Oven Drawer Isn't a Junk Drawer (Even If You Treat It Like One)
If your oven has a bottom drawer stuffed with random pans, lids and maybe that waffle iron you forgot you owned, you're not alone. For most of us, it's become the kitchen's unofficial junk drawer -- a hiding place for chaos in cookware form. But here's the twist: That mystery drawer might have an actual purpose you never knew about. And no, it's not just for stashing stray baking sheets. Depending on your oven model, that drawer could be doing more than collecting clutter. In some units, it's a warming drawer meant to keep cooked food hot until you're ready to serve. In others, it's a broiler drawer-perfect for charring veggies or crisping up casseroles. And yes, in some cases, it really is just storage. If you've never checked your oven manual (or long since lost it), now's the time to find out what that drawer was actually designed to do. Now, if you're scratching your head thinking, "Wait, what?" don't worry -- you're not alone. Most of us have never opened the oven manual unless it was to fan a smoke alarm. But fear not! We're not about to assign homework. No dense instruction manuals here. We're breaking it down for you in plain, delicious terms. Here's how to decode your oven drawer's secret identity and how to use it without accidentally slow-roasting your muffin tins. Read more: Clever Cleaning Hacks for the Hardest-to-Reach Crevices in Your Kitchen How to clean your oven with baking soda and vinegar How to clean your oven with baking soda and vinegar Click to unmute Video Player is loading. Play Video Play Skip Backward Skip Forward Next playlist item Unmute Current Time 0:00 / Duration 1:29 Loaded : 6.62% 0:00 Stream Type LIVE Seek to live, currently behind live LIVE Remaining Time - 1:29 Share Fullscreen This is a modal window. Beginning of dialog window. Escape will cancel and close the window. Text Color White Black Red Green Blue Yellow Magenta Cyan Opacity Opaque Semi-Transparent Text Background Color Black White Red Green Blue Yellow Magenta Cyan Opacity Opaque Semi-Transparent Transparent Caption Area Background Color Black White Red Green Blue Yellow Magenta Cyan Opacity Transparent Semi-Transparent Opaque Font Size 50% 75% 100% 125% 150% 175% 200% 300% 400% Text Edge Style None Raised Depressed Uniform Drop shadow Font Family Proportional Sans-Serif Monospace Sans-Serif Proportional Serif Monospace Serif Casual Script Small Caps Reset Done Close Modal Dialog End of dialog window. Close Modal Dialog This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. Close Modal Dialog This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. How to clean your oven with baking soda and vinegar 3 functions of your oven's bottom drawer 1. Warming drawer A warming drawer is easy to identify. Take a look at the buttons on your oven. If one of them is labeled "Warming Drawer" then that's exactly what you have. Anytime you need to warm a pie or a loaf of bread -- or you just want to keep dishes warm while the rest of the meal finishes cooking -- pop it into the warming drawer and push the warming button. 2. Broiler Broiler drawers are typically found on gas ovens and are very shallow. Chris Monroe/CNET If you have an oven heated with natural gas, the drawer is typically a broiler. To be sure, pull open the door. If it looks more like a retractable pan than a drawer, then it's a broiler. Think of the broiler as an extra cooking area. It's best for toasting or browning foods like casseroles or breads. Any item placed in the broiler will burn quickly, though, so check on it every couple of minutes. 3. Storage drawer A storage drawer is usually much deeper than a warming drawer or broiler. Chris Monroe/CNET If there isn't a warming button and the area looks like a deep, empty drawer, then you probably have a storage drawer. As per a recent Reddit discussion, many people are unsure about what to keep in this space. This is a good place to store cast iron pots and pans, because the warmth from your oven will help keep them rust free. Just be sure not to store plastic items in this drawer, because they may become warped due to residual heat. Likewise, some older ovens have little insulation and may heat your metal cookware when the oven is on. As a precaution, always use oven mitts to remove cookware during or after your oven has been in use.
News24
an hour ago
- News24
Day of firsts, records and change: Stage set for epic Comrades 2025
Be among those who shape the future with knowledge. Uncover exclusive stories that captivate your mind and heart with our FREE 14-day subscription trial. Dive into a world of inspiration, learning, and empowerment. You can only trial once. Start your FREE trial now Show Comments ()
WIRED
an hour ago
- WIRED
Tech Up Your Sourdough With These Upper-Crust Baking Gadgets
Sourdough bread is one of the most wonderful things you can make with your hands, but it can be fussy and hard to get consistently right. These three new devices eliminate most of the guesswork. Courtesy of Sourdough Sidekick All products featured on WIRED are independently selected by our editors. However, we may receive compensation from retailers and/or from purchases of products through these links. I love making sauerkraut. I've almost always got a batch actively fermenting and another in the fridge, ready to eat. It's a project that can take a week or two, almost entirely hands-off once the veggies are cut and salted. To keep the active batch happy—it likes hanging around between 65 and 70 degrees Fahrenheit—I typically I keep it near the slider by my desk on the shady side of the room, closer to the glass if it needs to be cooler, a little farther away if it's cold out. Making sourdough bread, however, is a much more complicated process that involves different stages of fermentation that tend to like it hot. When you're starting a new batch of starter—the yeasty mixture that gives the loaf the bubbles to rise and the tang to light up your taste buds—it likes temperatures in the mid to high 70s to low 80s, what's affectionately known as the Goldilocks zone, not too hot and not too cool. Temperature control is key for the sourdough making process, and a group of new, recent, and forthcoming products that help coddle your starter and dough might just be enough help for people on the edge to become full-fledged sourdough people. In your home, finding consistently warm-enough spots can be daunting, especially for those of us who are newer or more casual sourdough bakers. While sauerkraut is pretty simple and forgiving, making sourdough is not. It is variables galore as you work to coax flour and water from separate states into a delicious risen loaf. This is particularly noticeable when you're in the week-plus project of creating starter, then keeping it happy for months or years. The variables of making and maintaining starter include weights of water, one or two kinds of flour, and the starter itself. It involves the temperature of that water and the temperature you store it at. Once you're ready to make a loaf, sourdough bread making is often a two-day process with multiple steps and techniques, wherein temperature control is critical in keeping the dough happy. A perfect sourdough boule. PHOTOGRAPH: GETTY IMAGES Bread making isn't one skill or technique, it's a bunch of them, and each step depends on the success of the ones before it. Somewhere in there, insert a problem, or just a little doubt about what you're doing. Maybe your starter smells funny, or the dough doesn't look like it does in the recipe photo. Then what? Some problems could be the result of the last thing you did or a skipped starter feeding from a week ago or something else entirely. Happy troubleshooting! When you're an amateur or parachuting into it for the first time, failure or at least disappointment is part of the game. If this both heightens your desire to make sourdough and spikes your anxiety, you'll understand why pegging any variables in the process can help eliminate confusion. The first product that caught my attention is the Sourdough Sidekick, a collaboration between King Arthur Flour and FirstBuild, GE Appliances' prototyping and product development lab. The countertop device is available for preorder and is due out early in 2026. Keeping starter happy means feeding or 'refreshing' it, which requires you to combine a tiny bit of the existing batch with water and flour to keep the bacteria and yeasts in the mixture happy and well fed. Some experts even recommend doing this twice a day … forever … which is fine if you bake on most days and is way too much if you no longer work from home, are a busy person, or would just rather not be beholden to a little jar of yeasty flour and water on your countertop. The Sidekick's schtick is that you can program it to prolong the time between your interactions with it as it automates the feeding. It even has a mode where you tell it when you'll be baking and it will make sure that your starter is timed out perfectly for your dough and make a little extra to keep your starter refreshed in perpetuity. (Non-nerds, skip the following sentence: It can even turn your starter into levain for your bread and leave enough at the end to keep the starter rolling.) It also cuts down on waste and time spent cleaning by using tiny doses of flour and water during the refreshments. The Sourdough Sidekick Courtesy of Sourdough Sidekick I got a Zoom call walk-through on this from Rick Suel, engineering director at FirstBuild's Louisville, Kentucky, headquarters, and it's easy to see how the Sidekick could make bread making and starter maintaining easier. The machine looks and acts a bit like a fully automatic coffee machine with a flour hopper up top and a water tank in the back. The two ingredients are stirred together in the fermentation vessel, and the amounts are adjusted depending on ambient temperature. It's pretty slick. Brød & Taylor takes a different tack to achieve a similar effect. Its Sourdough Home ($119) looks like a shoebox-sized countertop fridge and it can hold starter anywhere between 41 and 122 degrees. For me, this meant I could hold my starter at 80 degrees, the recommended temperature in the recipe I used, and keep it there during the 10-plus days of starter creation. I wasn't finding anything warmer than 77 degrees next to my fridge, so when I was troubleshooting on day six or seven, I stuck it in the freshly arrived Home and didn't have to worry about the temperature being a factor anymore. The Sourdough Home Courtesy of Brød & Taylor The Home also has the ability to space out your sourdough refreshments, not by Sidekick-style microdoses but by cooling the temperature of your starter. Fermentation will happen at preferred speeds, but cooling the starter slows the process down, allowing you to refresh less. The first time I tried it at a lower temperature, following two weeks of daily refreshments, I set it to 50 degrees and walked away, sort of stunned to see it bubbly and happy 48 hours later, compared to how spent and flabby it would have been if it was held that long at 80 degrees. It was easy to see how something like this is appealing to both beginner and experienced bread bakers. Controlling the temperature is also extremely helpful once you start making bread. SourHouse, which came out with the starter-coddling Goldie a few years back, just released the DoughBed ($280), a heated, happy place for dough to rise, if you can afford that hefty price. Sourdough loaves often have two separate fermentation periods. The first, 'bulk fermentation,' is where the dough rises and develops flavors. Later, after a bit of shaping, it proofs in a vessel—often a basket—that helps it rise and ferment a bit more while formed in the shape of the loaf to come. The DoughBed is a pill-shaped glass bowl that fits over a heating pad and under an insulated cork lid. It helps keep bulk fermentation on track by holding the dough between 75 and 82 degrees. The bowl's long, flat bottom allows for more dough to be as close as possible to the heat. I usually do bulk fermentation in an eight-quart Cambro container, at which point it's either at the mercy of the ambient temperature in my house or I tuck it into that warm spot next to my fridge. I call it ready when it is notably risen and is both a bit smoothed out and bubbly. If you like that readiness on more of a schedule, the DoughBed's consistent temperature helps get the dough where you want it, when you want it. If you are on a schedule, you'll appreciate this predictability. The DoughBed Courtesy of SourHouse Of course, I put this stuff to the test, following Maurizio Leo's starter-creation instructions and his beginner's sourdough recipe. It really enveloped my life, becoming an oddly emotional roller coaster for someone like me who was not on the lookout for new hobbies. Leo breaks bread making down into eight main steps, in addition to the daily care of your starter. There is a lot to learn for each part of the process. When you're busy learning or getting better at a bunch of consecutive new steps, errors can compound, potentially not even presenting themselves immediately. Controlling a few variables helps keep you on the right path and I appreciated both the Sourdough Home and the DoughBed because they clearly helped keep things moving in the right direction. In the end, it was not bakery-quality bread I made, but it was surprisingly good and something I was happy to share. I have no doubt that using both helped make for a better final product. It's definitely possible to approximate the temperatures you're looking for with these new devices by putting your starter in a warm spot in your home like on top of the fridge, next to the rice cooker, or, the herpetologist's favorite, on top of a $13 reptile heating pad. (Hat tip to Paul Adams at America's Test Kitchen who turned me on to that one!) If you can get the right temperature consistently using one of those options, go for it. But if you are new to the game, like the process, want to keep some uncertainty out of it, and are perhaps on a bit of a schedule, you might want to take a closer look at them. They will take some of the guesswork out of your baking and get you to better bread sooner.
