Minister Ashwini Vaishnaw inaugurates India's largest automobile Gatishakti Cargo Terminal in Manesar
CHANDIGARH: The Union Railway Minister Ashwini Vaishnaw inaugurated the country's largest automobile cargo terminal, the Gati Shakti Multi-Modal Cargo Terminal at Maruti Suzuki's Manesar facility in Haryana.
The terminal is expected to significantly enhance freight capacity and industrial logistics.
It is connected to Patli railway station via a ten-kilometre dedicated rail corridor, a component of the 121.7-kilometre Haryana Orbital Rail Corridor developed by the Haryana Rail Infrastructure Development Corporation (HRIDC).
Vaishnaw noted that 108 Multimodal Cargo terminals are now ready and will soon be in service.
Spread over 46 acres inside the MSIL Manesar facility, the railway siding features a fully electrified corridor having four full-length tracks for rakes and one track for engine escape, totalling 8.2 kilometres of track length.
The siding also includes a two-floor station building, a dedicated pathway for guards and drivers along the tracks, advanced electronic train interlocking and many more.
Models manufactured at MSIL's Gurugram and Manesar facilities will be dispatched to 17 hubs from this railway siding serving 380 cities across India.
Port locations of Mundra and Pipavav, used by the company for exports, will also be served. The railway siding will have a dispatch capability of 450,000 vehicles at full capacity.
Speaking at the inauguration of the railway siding facility at Maruti Plant in Manesar, Haryana, Ashwini Vaishnav said that to upgrade passenger trains, 16 and 20-coach Main Line EMU trains will be manufactured.
Till now, MEMUs were manufactured with 8 or 12 coaches. This project will be implemented in a new factory being started in Kazipet, Telangana. This will provide great relief for short-distance travel.
"The number of Amrit Bharat Express trains will soon increase by six more as 50 more trains are under making. Also, Vande Bharat trains are being extended to new routes,'' he said.
Vaishnav said, "NaMo Bharat trains have received a great response from the passengers. Now, 50 new AC passenger trains will be added. Earlier, two trains started between Ahmedabad-Bhuj and Patna-Jaynagar. In total, 150 new passenger trains will come into service. So far, the work of 1300 Amrit Bharat stations has been approved. Out of these, 103 stations have been completed recently, and the Prime Minister Narendra Modi inaugurated them from Bikaner. Now, 100 more such stations will be completed by December 2025, and 500 more stations will be constructed by 2026.''
Vaishnaw said that to prevent misuse of bots in Tatkal ticket booking, only KYC-verified passengers will get the facility of online booking from July 1 and an ID will also be mandatory on window booking. He added that India now ranks second in the world in both freight and passenger traffic.
"Last year, 7.2 billion passengers travelled by rail and 1617 million tonnes of goods were carried. The freight corridor is now fully operational and about 400 freight trains are running on it every day,'' he said.
Vaishnaw further said that the Bikaner Division has started publishing the chart 24 hours in advance (it was four hours in advance, earlier) as an innovative initiative.
It reduced uncertainty among the passengers and facilitated them in making better plans.
He said that the Indian Railways has witnessed an unprecedented transformation in the last 11 years under the leadership of Prime Minister Narendra Modi.
He added that before 2014, Railways remained a victim of neglect for decades, with an annual investment of only Rs 25,000 to 30,000 crores.
However, now the investment has increased to Rs 2.5 lakh crores, which is accelerating the development of railway infrastructure and facilities.
Vaishnaw said, "Legacy problems prevailing in Railways over the years are now being eliminated one by one. Stations, trains, toilets, tracks, cleanliness, technology -- every sector has been improved comprehensively. New facilities are being provided to passengers and integrated development is being given priority in collaboration with the industry.''
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Time of India
33 minutes ago
- Time of India
Rail link for Maruti factory: What this means for car transport logistics in India
Gurgaon: Inauguration of a multi-modal cargo terminal at Maruti Suzuki 's manufacturing plant in Manesar is being touted as a shift towards sustainable transportation that will help India's largest carmaker reduce its carbon footprint. What is a multi-modal cargo terminal? As the term suggests, a multi-modal terminal is a specially designed facility that helps transfer goods between different modes of transportation. The idea is to leverage the strength of different transportation modes – cost-efficacy and eco-friendliness of railways, flexibility and last-mile connectivity of road, and speed of air freight. According to govt officials, there are 108 such terminals in India. What about the Manesar terminal? The two-storey terminal, India's largest such facility, was built over 46 acres inside Maruti Suzuki India's manufacturing plant in Manesar. It will be used exclusively by the automaker. How will it operate and what are its benefits? Cars manufactured at Maruti's Gurgaon plant will be transported by truck to the Manesar plant, where they will be loaded into railway coaches for dispatch to various destinations. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Giao dịch vàng CFDs với mức chênh lệch giá thấp nhất IC Markets Đăng ký Undo Vehicles manufactured at the Manesar plant will be directly loaded into railway coaches from the cargo terminal for transporting across India. This will reduce the carmaker's reliance on trailer trucks, eventually easing road and highway traffic, including in NCR. Officials told TOI the company engages 9,000 truck transporters for ferrying its vehicles across India. How is this different from 'truck on train' RoRo (roll on, roll off) service? The 'truck on train' service for auto parts, rolled out on the western freight corridor from Rewari last year, allowed companies to send trucks loaded with auto parts or vehicles to be loaded onto trains. Once the cargo rakes reach their destination, trucks roll down the train and deliver the goods. How will cars be transported across India from the terminal? According to officials, the terminal will facilitate transport to 380 Indian cities. From the Manesar plant, cargo trains will go up to Patli station, which is part of the 126km Haryana Railway Orbital Corridor (HORC) project. HORC, of which only the Manesar-Patli portion has been completed till now, will connect Palwal to Sonipat through a broad-gauge double railway line for both passenger and goods traffic. The corridor, meant to decongest train traffic in Delhi with a bypass, will enable faster and more-affordable long-distance travel from Gurgaon, Manesar and other industrial hubs of Haryana. Patli station also falls on the Northern Railway line, which goes to Rewari, where it can switch to the Western Dedicated Freight Corridor (DFC). This 1,500km freight corridor starts from Dadri in UP and transports goods up to Gujarat — where Mundra and Pipavav ports are located. The freight corridor, once completed, will eventually reach JNPT port in Mumbai. What is railways' share in transporting Maruti vehicles? The automaker started dispatching its vehicles through railways over a decade ago. About 5% of vehicles manufactured by Maruti were transported via rail in 2014-15. This share steadily went up over the year, reaching 24% last financial year. The company says it aims to transport 35% of its production through trains by 2030-31.
Time of India
33 minutes ago
- Time of India
Manesar Maruti plant gets a direct link to railway grid
Gurgaon: Cars manufactured at Maruti Suzuki 's main factory in Manesar can directly board railway carriages within the compound as they head to sellers in different parts of the country. The country's largest multi-modal cargo terminal, which is located inside the factory premises, was inaugurated on Tuesday by railways minister Ahswani Vaishnaw and chief minister Nayab Singh Saini. The terminal is part of the first phase of Haryana Orbital Rail Corridor (HORC) project, which aims to streamline logistics in the state by connecting Palwal to Sonipat via Manesar and other industrial hubs. To be used exclusively by Maruti Suzuki, the terminal has a direct link with Northern Railway at Patli through a 6.9km track. From Patli, cargo rakes can go to Rewari and switch to the Western Dedicated Freight Corridor (DFC). The terminal can handle 4.5 lakh cars annually. The capacity, if utilised, will take both pollution and traffic pressure off NH-8 and other road links between north and west, two of the country's most industrialised belts. After flagging off the first train from the Manesar plant for Nagpur in Maharashtra with 276 cars, Vaishnaw said, "In Dec 2021, govt simplified the process to set up multi-modal cargo terminals, and today, there are 108 such terminals ready." Saini said vehicles manufactured at the Manesar plant could reach 380 cities and those meant for export can reach ports in Gujarat via DFC. "This will directly connect Haryana to the global supply chain," Saini said. Hisashi Takeuchi, managing director and CEO of Maruti Suzuki India Limited, said he was "very happy" that the country's largest automobile in-plant railway siding was inaugurated in Manesar. "The company's second railway siding facility signifies a landmark achievement in its green logistics journey. The project underscores our strong commitment to India's net-zero emissions target. It will contribute to avoiding 175,000 tonnes of CO2 emissions, saving 60 million litres of fuel annually at full capacity, and reducing road congestion," Takeuchi said. He added that the automaker aims to transport 35% of its vehicles through railways by 2030-31. Maruti has dispatched 25 lakh vehicles by rail since 2014-15. But it started out by transporting cars to a railway station in trucks before loading them onto trains. The company, a few months ago, inaugurated its first railway siding facility at its Gujarat plant. Last year, Maruti started using the 'truck on train' facility from Rewari. For this too, cars were loaded into trucks, but the trucks were directly driven onto trains. Spread over 46 acres, the Manesar terminal has four tracks for rakes and one for engine escape, totaling 8.2km in length. Registered under PM GatiShakti National Master Plan, it was executed by Haryana Orbital Rail Corporation Ltd, a joint venture. Under this, Maruti is supposed to invest Rs 325 crore for the orbital corridor apart from Rs 127 crore for yard development in its Manesar plant.
Mint
an hour ago
- Mint
Govt discusses roadmap to implement stricter emission norms for four-wheelers
New Delhi: Several Indian ministries on Tuesday discussed the roadmap for implementing the proposed Corporate Average Fuel Efficiency (CAFE) III norms, set to take effect from 2032. The Union ministries of power, road transport, heavy industries, and petroleum met to strengthen the regulatory framework and reduce carbon emissions of four-wheeler vehicles, Union power minister Manohar Lal said on social media platform X. In June last year, the Bureau of Energy Efficiency (BEE) rolled out the draft norms which would come into effect from 2032. BEE proposed stringent targets to cut automotive emissions, while emphasizing battery electric vehicles as key to its clean mobility drive. India's Corporate Average Fuel Efficiency (CAFE) norms are regulations aimed at improving the fuel economy of four-wheelers by limiting the average carbon dioxide (CO2) emissions of an automaker's entire fleet of vehicles sold in a given financial year. They are a critical component of the government's efforts to reduce its reliance on fossil fuels, curb air pollution, and meet its climate goals. Indicating an intent to support low- and zero-emission technologies, BEE has also proposed incentives for carmakers to produce more battery EVs to avail higher fuel efficiency credits, even as EV sales volumes are stagnating. BEE has proposed 91.7 gm CO2 per km and 70 gm CO2/km in CAFE 3 and CAFE 4, respectively at WLTP (world harmonised light vehicles testing procedure). The current, operational CAFE-II norms came into effect in 2022. These norms are relevant for petrol, diesel, CNG (compressed natural gas), LPG (liquefied petroleum gas), hybrid and electric passenger vehicles. Vehicles covered under these norms include those having up to nine seats including the driver's seat and a gross vehicle weight not exceeding 3,500 kg. Commercial vehicles with gross weight of 12 tonne or more are covered under separate fuel efficiency norms that were finalized in August 2017. Under the current CAFE-II norms, the cap on emission by passenger vehicles was pegged at 113 gm CO2 per km. It was brought down from 130 gm CO2 per km under CAFE-I norms, which had come into effect in 2017.
