Watch: Air NZ plane damaged in Brisbane departs for Auckland
The Boeing 777 will return without being pressurised and at around 10,000ft after suffering puncture damage while pushing back from its gate on Thursday.
The plane's service to Auckland had to be cancelled as a result, with a full inspection undertaken by a ground engineering team.
"We sincerely apologise for the disruption and appreciate the patience of our customers as we work to rebook them on the next available flights," Air New Zealand chief operating officer Alex Marren said on Thursday.
The airline told 1News today there had been puncture damage to a "very small section" of the aircraft's skin. The puncture was around 7cm wide and below the captain's window.
There was no further damage to the aircraft. It was expected to fly at around 10,000ft, "although that is subject to change based on flying conditions."
Air New Zealand chief safety and risk officer Nathan McGraw said the engineering team consulted with Boeing on the appropriate repair approach.
"The aircraft remains in Brisbane and is planned to return to Auckland today for the repairs to be carried out by our engineering and maintenance team.
"The aircraft will operate unpressurised, with no passengers or cargo onboard, at a lower cruise altitude, which is not unusual in these scenarios."
McGraw said the aircraft was already scheduled to travel to Singapore as part of routine maintenance.
"Once repairs are completed in Auckland, the aircraft will continue to Singapore next Wednesday as originally planned for scheduled maintenance.
"Because this ground time was planned, the additional repairs will not affect the overall schedule or impact any customer travel plans."
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Otago Daily Times
a day ago
- Otago Daily Times
Air traffic control fault disrupts multiple trans-Tasman flights
Passengers on NZ271 were told Oceania airspace was closed. Photo: Flight Radar An air traffic control outage has disrupted multiple trans-Tasman flights on Saturday night, with an investigation now underway. Multiple Australia-bound flights were forced into a holding pattern, with some diverted back to New Zealand. Flight Radar showed at least one Air New Zealand flight to Brisbane had looped back and was in a holding pattern above the capital. Airways New Zealand chief executive James Young said the organisation's main oceanic air traffic control system experienced a "disruption", which temporarily impacted air traffic services operating across the Tasman. "New Zealand's oceanic airspace covers a large area across the Pacific Ocean and Tasman Sea. The oceanic air traffic control system is the system Airways uses to manage aircraft flying to and from New Zealand across this airspace. "At 4.30pm, the main oceanic air traffic control system experienced an outage and operations were switched to a back-up system. During this time, flight plans for the Tasman sector were unable to be processed through the system, causing delays. "As a result of this, five flights were held in the air, three of which were diverted back to New Zealand after holding for around 40 minutes, with the remaining two flights proceeding to their destination after holding. Flights were also held on the ground in both Australia and New Zealand during this time, he said." The main system was restored at 5.05pm, and normal operations had resumed by 5.30pm, he said. A full technical review is now underway. "Our main priority is the safety of the travelling public and we apologise to all customers and their passengers who were affected," he said. Air New Zealand has been contacted for comment.
1News
a day ago
- 1News
Flights delayed, grounded after air traffic control power outage
Five flights across the country were delayed and others were grounded following a power outage affecting air traffic control this afternoon. Air traffic service provider Airways New Zealand "experienced a disruption to its main oceanic air traffic control system which temporarily disrupted air traffic services operating across the Tasman", CEO James Young told 1News in a statement. "At 4.30pm, the main oceanic air traffic control system experienced an outage and operations were switched to a back-up system. During this time, flight plans for the Tasman sector were unable to be processed through the system, causing delays." Five flights were held in the air as a result, Young said – "three of which were diverted back to New Zealand after holding for around 40 minutes, with the remaining two flights proceeding to their destination after holding". "Flights were also held on the ground in both Australia and New Zealand during this time. ADVERTISEMENT "The main system was restored at 5.05pm with normal operations resuming by 5.30pm." Young said a full technical review is now underway to determine the cause of the outage. "Our main priority is the safety of the travelling public and we apologise to all customers and their passengers who were affected." A Jetstar spokesperson told 1News one flight from Dunedin and another from Christchurch "returned to refuel due to a short air traffic control outage earlier". 'There is no further disruption.' A Queenstown Airport spokesperson confirmed "some flights" were delayed but none were cancelled or diverted. "All flights have now resumed, and things are back to normal." ADVERTISEMENT A spokesperson for the Civil Aviation Authority told 1News a technical fault in the main Operational Control System (OCS) platform "temporarily disrupted air traffic services across several sectors". "The issue has since been resolved, and Oceania airspace is now open. "The Civil Aviation Authority continues to monitor the situation closely. In line with our safety oversight responsibilities, we will be following up with Airways New Zealand regarding the cause of the outage as part of our normal regulatory activities."
RNZ News
a day ago
- RNZ News
Air traffic control outage disrupts multiple flights, forcing diversions back to New Zealand
Passengers on NZ271 were told Oceania airspace was closed. Photo: Flight Radar An air traffic control outage has disrupted multiple trans-Tasman flights on Saturday night, with an investigation now underway. Multiple Australia-bound flights were forced into a holding pattern, with some diverted back to New Zealand. Flight Radar showed at least one Air New Zealand flight to Brisbane had looped back and was in a holding pattern above the capital. Airways New Zealand chief executive James Young said the organisation's main oceanic air traffic control system experienced a "disruption", which temporarily impacted air traffic services operating across the Tasman. "New Zealand's oceanic airspace covers a large area across the Pacific Ocean and Tasman Sea. The oceanic air traffic control system is the system Airways uses to manage aircraft flying to and from New Zealand across this airspace. "At 4.30pm, the main oceanic air traffic control system experienced an outage and operations were switched to a back-up system. During this time, flight plans for the Tasman sector were unable to be processed through the system, causing delays. "As a result of this, five flights were held in the air, three of which were diverted back to New Zealand after holding for around 40 minutes, with the remaining two flights proceeding to their destination after holding. Flights were also held on the ground in both Australia and New Zealand during this time, he said." The main system was restored at 5.05pm, and normal operations had resumed by 5.30pm, he said. A full technical review is now underway. "Our main priority is the safety of the travelling public and we apologise to all customers and their passengers who were affected," he said. Air New Zealand has been contacted for comment. Sign up for Ngā Pitopito Kōrero , a daily newsletter curated by our editors and delivered straight to your inbox every weekday.
