Lower Your Summer Energy Bills by Making Sure Your Ceiling Fan is Spinning the Right Way
A ceiling fan can make a room feel up to 4 degrees cooler, so you can dial back your air conditioning without sacrificing comfort. All it takes is flipping a switch to ensure it's spinning in the right direction (counterclockwise for summer), and you're on your way to better airflow and lower energy costs.
It's one of the easiest ways to beat the heat without raising your utility bill -- no fancy tech or major upgrades are required. Bonus: It's a small move that can shrink your environmental footprint.
Take a moment to flip this hidden setting on your ceiling fan. You'll stay comfortable all season long and keep your energy bills in check.
For more on saving money on energy, learn how unplugging some appliances can save you $100 a year and the most efficient temperature for your thermostat this summer.
How to change the direction of your ceiling fan
Changing the direction of your ceiling fan's rotation is simple. It's usually controlled by a sliding switch on the motor housing. This switch lets you adjust the fan from spinning clockwise to counterclockwise.
Before you make any changes, turn off your ceiling fan -- you don't want to hurt yourself or anyone else in your home. Look for the small sliding switch on the side of the fan's motor housing. It should be labeled with markings like "Forward/Reverse" or have arrows pointing in opposite directions.
To switch rotation to counterclockwise, slide the switch to Forward or Counterclockwise. For clockwise rotation, slide the same directional switch to Reverse or Counterclockwise. The fan blades will start to push air upward to recirculate warmer air.
If there's no switch on your ceiling fan, you may have a remote control that can change the direction with the push of a button. And if you've got a smart fan, you can probably change direction with your voice or by using an app. You may need to check your instruction manual for further help.
Set your ceiling fan to counterclockwise in the summer
During the summer, you'll want your ceiling fan to rotate counterclockwise, blowing cooler air straight down into the room. Just make sure the fins on your fan blades are tilted downward to help push the air toward the floor. You should feel the air in the room start to get cooler.
Switch your ceiling fan back to clockwise in the winter
In winter, you'll want your ceiling fan to rotate clockwise. The airflow will then be directed upward, circulating hot air from the ceiling back down into the room to help spread warmth.
Other tips for making the most of your ceiling fans
If you want to reap even more benefits from your ceiling fans, choose the right fan. According to the Department of Energy, you should look for fans with the Energy Star label, as they're around 60% more efficient than conventional fans.
You'll also want to ensure the fan you're using is the correct size for your room. Larger rooms may need bigger fans with blade spans of at least 52 inches or more, while smaller rooms can get by using fans of 36 inches.
If changing your fan blades' direction becomes a pain, you might consider installing a ceiling fan with a remote control or implementing a smart switch. This makes it easier to change the fan direction and speed without reaching up, using a ladder, or fumbling around for the switch to push. The easier it is to change the fan blades' rotation, the easier it is for you to be cooler or warmer in uncomfortable temperatures.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CNET
38 minutes ago
- CNET
3 Reasons Every Kitchen Needs a Magnetic Knife Strip
There isn't a piece of kitchen equipment that benefits more from proper storage than knives. That's why a knife strip is the first thing I buy for the kitchen of any home I move into, and urge friends to install one if they haven't already. Yep, I'd sooner live without a microwave or air fryer -- OK, maybe not my precious air fryer -- than this indispensable piece of kitchen infrastructure. Best of all, a good magnetic strip to hang your best knives rarely costs more than $30. I'm a culinary-school trained non-chef, but even chef chefs recommend this invaluable tool: "I first tried a magnetic strip in my home kitchen a few years ago and I'm hooked," says Melissa Araujo, Chef/Owner of Alma Café in New Orleans. You're probably wondering what's so great about knife strips compared to other forms of kitchen blade storage. Here are three big reasons, personal and chef-approved, to add an affordable magnetic knife strip to your home. 1. A magnetic knife strip is a major space saver The more you can get up on your walls, the more space you'll have on the counter and in drawers and cupboards. Pamela Vachon/CNET All of the many reasons to own a magnetic knife strip are great reasons, so it's hard to know where to lead off, but as someone who has usually been at a loss for meaningful counter space in urban apartments, I'm going to go with this one. Freeing up space that would otherwise be occupied by a knife block, or in a silverware drawer, is perhaps the number one reason for home cooks to consider a magnetic knife strip. Read more: These Kitchen Organizers Will Give You Miles of Extra Counter Space Space-saving is also a motivating factor in professional kitchens. "I even started using them in my restaurants," says Araujo. "Plus they look cool, and you can see all your knives at the same time so it's easy to know which one to pull," she says. 2. They keep knives sharper for longer A knife strip won't dull your blades the way some storage types do. Jacobs StockWhether you've got new knives, or freshly sharpened knives, storing them on a magnetic knife strip has myriad benefits in the staying sharp department. (If your knives behave more like bludgeons than blades, first things first, get them sharpened.) First, the knife strip prevents your knives from knocking around in a utensil drawer, which can lead to dulling over time. Wooden knife blocks are okay for this purpose, but they still create a little more wear and tear than simply mounting them al fresco does. And, as Araujo's point above, you're not constantly pulling them in and out of the block in a guessing game of which-knife-went-where several times a day. Read more: Want to Completely Ruin Your Kitchen Knives? Here's How For me, there's also another element to keeping knives sharp that is enabled by the knife strip. The honing steel isn't a sharpener, per se, but its function is to help preserve the sharpness. Even as someone who was trained to use it, I have a very out-of-sight-out-of-mind relationship with this tool, but with the magnetic strip, the honing steel is very much in sight all of the time, which means I'm more likely to employ it. 3. A strip is more sanitary than a knife block Knife blocks can grow mold in the slots and are difficult to clean, making magnetic knife strips a more sanitary storage option. Gourmetop Are you concerned about places in your kitchen where bacteria may be hiding? Your magnetic strip is not one. But your knife block…? "Knife blocks trap moisture in the slots," says Araujo, which can cause microorganisms like mold spores and bacteria to thrive. (She would know, in a humid place like New Orleans. What's the dew point in your neighborhood right now?) Even if you put your knives away without fully drying them first -- don't do this, but if you do -- at least the magnetic strip gives them some air circulation. This helps not only with keeping things sanitary, but also with keeping things sharp. Best practices for using a magnetic knife strip Always put the knives spine-down on your strip so you don't chip the edges. Pamela Vachon/CNET If you're now convinced of the superiority of the magnetic knife strip, there are a few things to consider. Get a good one: "Spend the money," advises Araujo. "Cheap ones aren't strong, especially if you have solid, high-quality, heavy-duty knives." Fortunately, there's only so high the price can go here, and if you've dropped some real coin for your professional-grade knives, the magnetic strip will be a very small investment toward keeping them in good condition. Some magnetic knife strips we like: The most straightforward magnetic strip look: I've owned this $20 metal holder several times over. It has tens of thousands of positive Amazon ratings, comes in six different sizes, and maxes out around $35 for a 24-inch strip. I swear by this $20 knife strip from Amazon. Pamela Vachon/CNET Another good option is this $20 model with a dual-strip look and hooks for hanging other kitchen tools for a comprehensive storage solution. There are magnetic strips that hold more than just knives. Eco Kitchen An Amazon best seller, this $21 magnetic strip has a wood finish to suit a particular aesthetic, if that's a reason why you're hesitant to give up a wooden knife block. Wooden strips are also less likely to ding your cutlery should you accidentally set a knife on it blade first. CNET's Home and Kitchen Editor David Watsky uses this one. This simple wooden knife strip is good for three to four blades. David Watsky/CNET Mount it correctly: If your knife collection is small, you may be able to get away with the double-stick tape mounting that is included with some magnetic strips, but the much safer bet is to go the hardware route to make sure it is flush against the wall. I had a pro drill into the tile backsplash in my current kitchen in order to accommodate the knife strip. It looks sharp and is extremely secure. (Having your knives clatter to the ground because of an inappropriately installed strip isn't exactly enabling all of the benefits of owning one.) Store your knives appropriately: "ALWAYS put the knives spine-down so you don't chip the edges," advises Araujo. When pulling a knife off of the strip, it's also important to tilt the blade away from the strip, rather than slide it off, to help preserve its sharpness.
Yahoo
an hour ago
- Yahoo
Final Conversation Revealed Between Black Hawk Pilot and Her Instructor Before They Collided with Passenger Jet
The pilot was told to move left just seconds before their helicopter hit an American Airlines flight outside Washington, TO KNOW The NTSB just started a three-day investigative hearing into the Jan. 29 collision of an Army helicopter and American Airlines Flight 5342 Sixty-seven people were killed Among the new details from the hearing, which started on Wednesday, July 30, is a recap of what led up to the crashNew details have been released about the final minutes before an Army helicopter collided with an American Airlines passenger jet in January near Washington, D.C., killing 67 people. The information, disclosed along with thousands of pages of records as part of the government's ongoing probe, fuels further questions about the Black Hawk's conduct in the sky — including whether the craft actually knew where it was in the air. On Wednesday, July 30, the National Transportation Safety Board began a three-day hearing into the Jan. 29 crash at Ronald Reagan Washington National Airport, which has been under investigation for months. All 64 people on the American Airlines flight were killed along with the three crew members on the chopper. It remains unclear if the collision was caused by some kind of mistake on the part of the helicopter crew. Air traffic controllers have also drawn scrutiny after reports of staffing issues that day; helicopters have long flown close to the airport, too. As part of this week's hearing, officials showed an animation of what led up to the fatal collision over the Potomac River next to the airport. Never miss a story — sign up for to stay up-to-date on the best of what PEOPLE has to offer, from celebrity news to compelling human interest stories. According to the NTSB presentation, which expands and confirms some previous information released by authorities, American Airlines Flight 5342 last communicated with air traffic controllers when they were told to switch runways about five minutes before landing, which they agreed to do. The jet was flying to D.C. from Wichita, Kan.; a number of young figure skaters were on board after attending an elite training camp. At the same time, the helicopter, which was flying as part of a night evaluation for the pilot, Capt. Rebecca Lobach, was heading back to Fort Belvoir in Virginia. The Black Hawk had a three-person crew: Lobach, 28, as well as Chief Warrant Officer 2 Andrew Eaves and 28-year-old Staff Sgt. Ryan O'Hara. Eaves, 39, was reportedly the instructor. Crucially, the route the helicopter was flying had a maximum altitude of 200 feet near the airport — but the helicopter continued to fly well above that, varying between the mid-200 feet range up to more than 300 feet as it approached Reagan. Later on Wednesday's hearing, officials testified that the helicopter's crew appeared to think they were flying lower than they were, possibly because of an altimeter error. At various times, they announced they were at altitudes approximately 100 feet lower than they were. About three minutes before the crash, Eaves told Lobach to 'come down for me' because they were at 300 feet, according to the new NTSB presentation. The presentation also shows the helicopter was twice warned by an air traffic controller about the approaching passenger jet, once about two minutes before the collision and again about 90 seconds later. Both times, the helicopter said it could see the other plane and requested a 'visual separation,' in which they would be allowed to navigate around the jet. A controller approved that. Five seconds after the second warning to watch out for the incoming plane, Eaves, the helicopter instructor, told Lobach, 'Alright, kinda come left for me ma'am, I think that's why he's asking,' to which she replied, 'Sure,' the presentation shows. Eaves then said, 'We're kinda out towards the middle,' and Lobach said, 'Okay fine.' The entire exchange lasts about four seconds. The helicopter was 270 feet in the air. Not far away, the American Airlines jet was descending toward the runway and was only 320 feet in the air. Three seconds later, at 8:48 p.m. local time, they collided. The NTSB hearing will continue this week. Read the original article on People Solve the daily Crossword
Yahoo
an hour ago
- Yahoo
JOSTENS HOSTS RECORD-SETTING NUMBER OF SCHOOLS AT JRGC 2025
ANNUAL EVENT FOCUSES ON STRENGTHENING SCHOOL CULTURE AND CLIMATE Minneapolis, MN, July 30, 2025 (GLOBE NEWSWIRE) -- An annual conference for creating a school culture of belonging, achievement and pride, the 2025 Jostens Renaissance Global Conference (JRGC), was hosted at the largest hotel on the West Coast, the Gaylord Pacific in Chula Vista, California, June 28-30, 2025. The conference, which hosted over 1,500 educators and student leaders from more than 300 schools across North America, provided school leaders with culture-building ideas, networking opportunities and turnkey resources for creating a strong culture and climate. Throughout the three-day event, participants experienced over 100 breakouts, passionate keynote speakers and inspiring general sessions designed to help teachers love their jobs and students thrive in school. Attendees gathered practical strategies to improve educator morale, academic achievement and character development to bring back to their school for the new year. Central Regional School District Superintendent Michelle CarneyRay-Yoder shared, "As a superintendent, I've witnessed firsthand how this conference consistently delivers powerful tools, fresh perspectives and actionable strategies. Everyone at JRGC leaves feeling energized to foster a culture where staff, faculty and students feel valued, motivated and empowered to be their best." At the Awards Gala, one of the highlights of the annual conference, Jostens recognized over 100 schools from across North America with the Renaissance School of Distinction award, which is earned by meeting criteria that demonstrates the robust implementation of strategic activities focused on school culture and climate. The gala also honored four Educators of the Year and two Jostens Renaissance Hall of Fame inductees selected from nominations submitted by educators, students, administrators and community members. The conference also featured a rally that models for schools how to celebrate academics and character with the same energy and fun as sports teams. The Renaissance Rally includes music and games, along with recognition for achievements like improved grade point average, attendance and positive behavior. "It's difficult to put the power of JRGC into words,' said Michael Wolf, Jostens VP of School Culture and Events. 'The educators and student leaders that attend are full of passion and purpose, creating a conference full of idea sharing, inspiration and a remarkably contagious energy. All of us at Jostens are very thankful for the culture they help shape at JRGC, and even more thankful for how they build culture at their schools using the Jostens Renaissance framework.' In addition to JRGC, Jostens Renaissance supports thousands of schools with resources for student leadership, character and wellness videos and professional development tools. All are available to Jostens customers as part of their partnership with the company. For more information on Jostens Renaissance, visit ABOUT JOSTENS RENAISSANCE EDUCATION Jostens Renaissance Education is a framework for building a culture where teachers love their jobs and students thrive in school. Renaissance helps schools across the country achieve tangible results through strengthening educator morale, academic achievement and character development. Founded in 1988 and based in Minneapolis, Minn., for more information visit ABOUT JOSTENS Jostens, a trusted partner within the academic and achievement space, provides products and services that help its customers celebrate meaningful milestones. The company's product assortment includes yearbooks, publications, custom-crafted jewelry and consumer goods that serve the K-12, collegiate and professional sports markets. Jostens was founded in 1897 and is headquartered in Minneapolis, Minn. Visit for more information. CONTACT: Sara Sausker JOSTENS 952-830-4765
