Toshiba Launches New SCiB™ Module with Double the Heat Dissipation Performance for EV Buses, Electric Ships, and Stationary Applications
TOKYO, April 8, 2025 /PRNewswire/ -- Toshiba Corporation has launched a new SCiB™ module, a lithium-ion battery designed for use in EV buses, electric ships, and stationary applications. The new product features an aluminum baseplate that dissipates approximately twice the heat of current modules. It will be available from mid-April 2025, in Japan and internationally.
Use of lithium-ion batteries is increasing and diversifying, and there is growing demand for batteries that can support constant rapid charging and discharging in applications as diverse as electric buses and power load leveling in stationary applications. However, constant input and output at high power levels in a short time generates lifeshortening heat in the batteries. The challenge for battery developers is to manage heat dissipation and maintain battery life while realizing high power input and output in a short time.
Toshiba's SCiB™ rechargeable batteries have a lithium titanate negative electrode that realizes safe operation, a long life, low temperature performance, fast charging, high input and output, and a wide effective state of charge (SOC *1). They are widely used in hybrid vehicles and industrial applications, including electric buses, cranes, trains, and automated guided vehicles in logistics centers. In addition to battery packs and cells, Toshiba also offers battery modules that can be connected in series or in parallel connnections to meet required voltages and capacities.
Users of module products want a balance between constant high input and output in a short time and battery life. Toshiba has met this increasing demand with a new module that is the first to feature an aluminum baseplate. Aluminum is an excellent conductor, and the new module dissipates heat at approximately twice the rate of current battery modules.
Aluminum has a lower the thermal resistance than the resin materials usually used in baseplates. However, as it is a conductor, the baseplate must be insulated from the battery cells. Toshiba has developed a novel structure that achieves the required voltage resistance, allowing commercialization. When used with the same cooling system normally applied by customers, and under typical operating conditions, heat dissipation performance is approximately double that of current modules, significantly extending battery life.
Adding new products to its module lineup allows Toshiba to respond flexibly to customer demands and application requirements. Toshiba will continue to offer products that leverage the unique features of its SCiB TM lithium-ion battery, while fully considering customer lifecycle costs, from installation to maintenance and disposal.
Product specification and Instruction manual can be downloaded from the following link. Please note that user registration is required to access the documents.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Korea Herald
2 hours ago
- Korea Herald
GIGABYTE Announces Availability of 27" QD-OLED Gaming Monitor AORUS FO27Q5P Featuring 500Hz Refresh Rate
TAIPEI, Aug. 20, 2025 /PRNewswire/ -- GIGABYTE, the world's leading computer brand, announced that the AORUS FO27Q5P, the world's fastest QD-OLED gaming monitor, is now available. Featuring a staggering 500Hz refresh rate, VESA DisplayHDR™ True Black 500 certification, and 0.03ms GtG response time, this 27-inch QHD OLED display delivers a new era of competitive gaming. With DP 2.1 UHBR20 support and GIGABYTE's exclusive AI Tactical Features and AI OLED Care, the FO27Q5P offers gamers the ultimate fusion of speed, clarity, and future-ready connectivity. Engineered for esports professionals and FPS enthusiasts, the AORUS FO27Q5P delivers unmatched responsiveness and visual fidelity. The 500Hz refresh rate QHD (2560x1440) panel with a 0.03ms GtG response is up to 10 times faster than traditional LCDs, ensuring razor-sharp motion in every frame. It is GIGABYTE's first monitor to meet the VESA ClearMR 21000 benchmark, offering unparalleled motion clarity. Combined with VESA DisplayHDR™ True Black 500, 99% DCI-P3 color gamut, and deep contrast levels, gamers can enjoy every detail with precision. The DP 2.1 UHBR20 interface supports an ultra-wide 80 Gbps bandwidth, 2.5 times higher than DP 1.4, ensuring full 500Hz capability and seamless compatibility with next-gen graphics cards like the GeForce RTX™ 50 Series, and supports Daisy Chain for multi-monitor setups. In addition to its industry-leading hardware, the AORUS FO27Q5P is powered by GIGABYTE's AI-driven features, designed to elevate gameplay through intelligent automation and responsiveness. Empowered by AI-Optimized Visuals, the monitor leverages AI Picture Mode, which detects content type and automatically adjusts color and brightness for optimal viewing. Users can enjoy seamless transitions across multiple modes, including FPS, MOBA, racing, RPG, movie, and reader. Completing the AI suite is AI Protection, with AI OLED Care automatically running pixel cleaning routines to reduce burn-in risk and maintain long-term screen integrity. To further support panel stability, FO27Q5P features Graphene Thermal Film Technology and an advanced cooling system, including a four-way ventilation layout and custom heatsink, ensuring quiet and consistent thermal performance, all without a fan. With these innovations, GIGABYTE reaffirms its confidence in OLED reliability by offering a 3-year warranty that includes burn-in coverage. The AORUS FO27Q5P is now available. Sales may vary by region and are subject to the actual launch schedule of local e-tailers and retailers. For more information, visit:
Korea Herald
3 hours ago
- Korea Herald
Delska's New 10MW Data Center in Latvia Achieves Tier III Design Certification
RIGA, Latvia, Aug. 19, 2025 /PRNewswire/ -- Northern European data center operator Delska's upcoming facility, EU North Riga LV DC1, has been awarded the prestigious Uptime Institute Tier III Design Certification—an important milestone ahead of its planned launch at the end of this year. Once operational, it will be one of the greenest data centers in the Baltic region. The Tier III Design certification ensures the facility meets strict standards for redundancy, safety, and uninterrupted service, guaranteeing 99.982% uptime. "In a world where even a few seconds of downtime can cost thousands, Tier III means our infrastructure stays online—even during planned maintenance," said Delska CEO Andris Gailitis. Addressing power shortages in major European hubs, the 10 MW site, offering up to 250 kW per rack, is built for next-generation workloads, including AI and high-performance computing (HPC). Its modular 6,000 m² layout is fully scalable, with the ability to expand the data center campus site up to 30 MW. Sustainability is at the core of the design. The facility will run entirely on 100% wind energy, with backup generators powered by Neste MY renewable diesel. Targeting a PUE of just 1.3, it will use advanced free-cooling systems, hot-aisle containment, an effective Weiss Technik wall cooling system and Trane Turbocor-based chillers. It supports both air cooling and high-density direct-to-chip cooling. Delska also aims for LEED green building certification, an achievement held by fewer than 15 buildings in Latvia. Upon completion, LV DC1 will undergo Tier III Facility certification to confirm its construction and operations meet the same high standard as its design. This will be Delska's third Tier III-certified data center and sixth overall, joining two Tier III Facility-certified sites in Lithuania. Plans include an additional Lithuanian data center and another facility in the region, strengthening Delska's Baltic data centers' network. About Delska Delska is one of the largest data center operators in the Baltics, with over 26 years in IT and network infrastructure. Operating fully green Tier III and PCI-DSS certified facilities in Riga and Vilnius with 19 MW capacity, Delska also maintains points of presence in Frankfurt, Amsterdam, and Stockholm. Its portfolio includes cloud, server rental, network, security, and managed services. Since being acquired by Quaero European Infrastructure Fund II in 2020, Delska has significantly expanded its infrastructure and improved energy efficiency. In 2024, DEAC (Latvia) and DLC (Lithuania) merged under a new Delska brand, and this year RackRay (Lithuania) joined the group of companies.
Korea Herald
4 hours ago
- Korea Herald
Rockwell Automation Report Finds CPG Industry Prioritizing Innovation Over Cost-Cutting
Research shows CPG leaders are investing in AI and talent to stay competitive MILWAUKEE, Aug. 19, 2025 /PRNewswire/ -- Rockwell Automation, Inc. (NYSE: ROK), the world's largest company dedicated to industrial automation and digital transformation, today announced the results of the 10th annual State of Smart Manufacturing Report: Consumer Packaged Goods (CPG) Edition. The findings highlight how manufacturers are placing greater importance on innovation, workforce development, and long-term growth strategies. The CPG industry is facing pressure on multiple fronts, from the growth of store brands to the demand for faster innovation and more sustainable products. At the same time, consumer loyalty is harder to earn, and expectations for customization and transparency are rising. In response to this, CPG companies are moving away from small-scale technology pilots and investing in solutions that deliver measurable results across the organization. The combination of workforce training, better use of data, and more adaptable systems is helping these manufacturers stay competitive while managing complexity. And as private-label brands expand and consumer expectations evolve, CPG leaders are prioritizing investments that help them compete more effectively in a crowded and fast-changing market. Notable Key Trends from 2024 to 2025: Rising Competition Leads Industry Concerns: In 2024, economic uncertainty and inflation were main challenges noted in our annual survey. In 2025, competition has taken the lead, driven by increased market pressure from private-label products and changing consumer buying habits. Technology Needs to Work for People: Companies are focusing less on simply adopting new tools and more on making sure new technology fits their teams and operations. Usability and scalability are now critical factors in technological decisions. Capabilities CPG leaders are looking for in their workforce include: communications/teamwork (86%), adaptability/flexibility (85%), while analytical thinking and cybersecurity practices are tied (84%). AI and Robotics Lead Investment Priorities: At the heart of technology investment decisions is a shift in thinking. 70% of CPG manufacturers say they are investing in AI, robotics, and simulation technologies for long-term business growth. This is a shift from last year when technology supported more sales analytics and process optimization. More companies are using data effectively The number of manufacturers who say they are using their data to guide decision-making is up from 40% in 2024 to 44% in 2025. AI is playing a growing role in data utilization in key areas like quality control, logistics, and cybersecurity, scoring 5% above the general average. Workforce strategies are evolving While 2024 emphasized attracting skilled labor, the 2025 report shows 34% of manufacturers are concentrating more on training current employees on updated processes, while 33% of the focus is on managing change effectively and improving employee retention. "CPG manufacturers are no longer just reacting to disruption—they're proactively investing in technologies that deliver sustainable growth and competitive advantage," said Steve Deitzer, vice president, Global Industry, CPG, Rockwell Automation. "This year's report shows a clear pivot toward long-term thinking, where AI, automation, and workforce enablement are central to success." Scalability and integration are now central to how CPG leaders approach growth. By aligning technology, people and processes, companies are working to build more agile and efficient operations that can keep up with market changes. The 2025 State of Smart Manufacturing Report, based on insights from 174 CPG leaders across 15 countries, is part of Rockwell Automation's broader global research initiative surveying over 1,500 manufacturing decision-makers. The full findings of the report can be found here.
