
How Apple Created a Custom iPhone Camera for ‘F1'
All products featured on WIRED are independently selected by our editors. However, we may receive compensation from retailers and/or from purchases of products through these links.
You can't mount a cinema camera on a Formula One race car. These nimble vehicles are built to precise specs, and capturing racing footage from the driver's point of view isn't as simple as slapping a GoPro on and calling it a day. That's the challenge Apple faced after Joseph Kosinski and Claudio Miranda, the director and cinematographer of the upcoming F1 Apple Original, wanted to use real POV racing footage in the film.
If you've watched a Formula One race lately, you've probably seen clips that show an angle from just behind the cockpit, with the top or side of the driver's helmet in the frame. Captured by onboard cameras embedded in the car, the resulting footage is designed for broadcast, using specific color spaces and codecs. Converting it to match the look of the rest of the F1 film would be too challenging to be feasible. Instead, Apple's engineering team replaced the broadcast module with a camera composed of iPhone parts. Custom Camera Photograph: Julian Chokkattu Photograph: Julian Chokkattu
The module looks nothing like an iPhone. It intentionally resembles the broadcast camera module, and Apple even had to match the weight so that its version wouldn't alter a car's specs. The inside, however, is completely different. (Apple gave us a peek during WWDC last week alongside an F1 car.)
At the heart is an iPhone camera sensor powered by an A-series chip. Apple didn't specify the exact sensor or chipset, but these were used for a few cars in real F1 races throughout the 2023 and 2024 seasons, so there's a chance it was the same A17 Pro and 48-megapixel primary camera in the iPhone 15 Pro. It also contained an iPhone battery and a neutral density filter over the camera to reduce the light entering the lens, giving film editors more control over exposure.
No one expects an iPhone camera to perform flawlessly at incredible speeds or extreme conditions, so the engineering team had to consider this factor. They tested the camera module to ensure it could endure extreme shock, vibrations, and heat—it supposedly surpassed the specs provided by Formula One.
The module ran iOS but had a custom firmware for the camera. The videos were captured in log format with Apple's ProRes lossless video codec, delivering footage that looks flat but gives the editors much more granular control to color grade and match the visuals with the rest of the film. This custom firmware inevitably led to two new features in the iPhone 15 Pro: log encoding and support for the Academy Color Encoding System (ACES) color workflow.
Since there are no radios in the module, a custom iPad app was the only way the filmmakers could make on-the-fly changes to the camera. Once connected via USB-C, they could adjust things like frame rate, exposure gain, shutter angle, and white balance. This is also where they'd hit record to start or stop recording. The footage captured with the module is sprinkled throughout the F1 film . Photograph: Julian Chokkattu
While the vast majority of Apple's customers will never use these capabilities, Apple has long been a proponent of artists using Apple hardware to create. With Apple Originals like F1 , the company now has a seat at the filmmaking level to further experiment and deliver exactly what the filmmakers want, which in turn allows it to develop new features for the iPhone.
F1 now joins the growing list of films shot—entirely or partially—on iPhone. That includes Sean Baker's Tangerine in 2015 and Danny Boyle's upcoming 28 Years Later , which also releases this month.
It's important to note that while companies tout that a film is captured via a smartphone, it's rarely purely through the capabilities of the smartphone alone. Film sets have significant control over lighting, which is crucial, and these smartphone cameras often have third-party lenses attached to the back and are mounted on tripods and rigs that level them up significantly more than your average vacation videos. Photograph: Julian Chokkattu
That said, improvements in smartphone cinematography enable more people to get a start in film without requiring expensive equipment. It doesn't take away from proper film equipment either. Case in point: Christopher Nolan's upcoming The Odyssey , the first blockbuster to reportedly be shot entirely with Imax film cameras. Imax CEO Rich Gelfond recently told members of the press at Cannes that Nolan asked his team to make some tweaks to improve production workflows and they obliged, making them lighter and quieter.
When you have Apple bankrolling your film, it's apparently not out of bounds to ask the iPhone makers to craft a custom mini camera to mount on a race car. Anything for the perfect shot.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
25 minutes ago
- Yahoo
Greenlane expands EV charging corridor to Phoenix
Greenlane announced it is establishing a second commercial electric vehicle (EV) charging corridor, this one connecting Southern California to Phoenix via Interstate 10. This comes as the company recently launched its flagship charging center in Colton, Calif., situated next to San Bernardino, in the heart of California's Inland Empire. The Colton location will serve as the anchor for this new corridor and is centrally located to support its first EV corridor, connecting Southern California to Las Vegas via the I-15 corridor. 'As the 15 goes up to Vegas and the 10 goes over to Phoenix, it's centrally located to support and service both corridors. Eventually, we're going to open up in Blythe and in Phoenix, and that will allow us to have key positions on the corridor. This enables trucks to go from location to location, ensuring they get a full charge without range anxiety,' said Patrick Macdonald-King, CEO of Greenlane, in an interview with FreightWaves. In addition to the corridor expansion, Greenlane also announced a new strategic partnership with EV truck maker and OEM Windrose Technology. Windrose recently validated the viability of long-haul electric trucking when it successfully completed single-charge journeys from Colton to Phoenix. On how the Windrose trucks are able to make the single-charge trip, one factor is in their charging setup. 'They can take an intake of about 800 kilowatt-hours per hour at our sites by putting two CCS chargers on either side of the truck. With their range, they've been able to do a single charge and go from Colton all the way to Phoenix, which has been very impressive. … They've been running the tests with fully loaded cargo. I believe it was about 75,000 pounds of what they were hauling across the corridor … real-world examples of technology and innovation at work,' added Macdonald-King. 'Achieving nearly 300 miles with a GCWR of 74,420 pounds on a single charge with 12% battery left proves that electric long-haul trucking isn't just theory—it's proven real-world performance,' added Wen Han, founder and CEO of Windrose Technology, in the press release. To handle the growth and expansion, the company is implementing forward-thinking infrastructure that can be upgraded to accommodate megawatt charging as the technology becomes available. At its Colton facility, Greenlane deployed 'Trenwa' tunneling throughout the site, allowing for cable upgrades without trenching. This will become important later as more companies switch from CCS to megawatt charging stations. That transition to full megawatt charging will not happen overnight, but it helps to be prepared. 'It depends on how much future planning you're doing on each site,' Macdonald-King said. 'A lot of the sites we're moving forward on into 2026-2027, we're going straight to megawatt charging because the trucks are coming out the following year.' The new corridor will also support Nevoya, an electric trucking company that plans to operate battery-electric trucks along both the I-10 and I-15 corridors. Greenlane anticipates opening the first location on this corridor by 2026, with two locations expected to be operational by the end of that year. 'Overall, we're excited about it. We're working with partners like Navistar and others, and they're very interested in the corridor. We've had a number of customers give us commitments to that corridor, which is why we've been focused on it. We're planning on getting that going, opening the first location probably in 2026, and hopefully two locations by the end of the year to service it,' Macdonald-King said. Greenlane is a joint venture between Daimler Truck, NextEra Energy and BlackRock. The post Greenlane expands EV charging corridor to Phoenix appeared first on FreightWaves. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
25 minutes ago
- Yahoo
Jack Dorsey declares victory over China in Bitcoin mining chip race
Jack Dorsey declares victory over China in Bitcoin mining chip race originally appeared on TheStreet. Twitter co-founder and Block, Inc. (NYSE: XYZ) boss Jack Dorsey thinks his team has outdone China in Bitcoin mining chips. Bitcoin mining is the process of using high-end computers to solve cryptographic functions, validate BTC transactions, and add blocks to the network in return for BTC rewards. Dorsey's fintech venture Block has increasingly adopted Bitcoin over the years, and its unit Proto is dedicated to Bitcoin mining. Proto, aiming to decentralize the supply of Bitcoin mining hardware and the distribution of hash rate, is expected to launch a suite of mining chips on Aug. 14. An X user wondered if Dorsey's Proto has "out engineered" China on Bitcoin mining chips, as it would turn the industry upside down. Dorsey simply responded, "we have." On Aug. 13, Block made another major announcement that it will privately raise $1.5 billion for general corporate purposes. How does Trump's China tariff policy affect Bitcoin mining? While the U.S. is the leading Bitcoin mining country in terms of hash rate, it is China that takes the lead in manufacturing mining rig equipment. The world's three largest manufacturers of Bitcoin mining machines, namely Bitmain, Canaan, and MicroBT — all of Chinese origin — build over 90% of global mining rigs. Bitcoin miners, including those based in the U.S., are highly dependent on the mining hardware supply from China. But President Donald Trump's aggressive tariff policy targeted toward China has the U.S. mining industry concerned about its prospects. This is where domestic players like Block come like Block, which recently joined the S&P 500 list, can manufacture Bitcoin mining rigs in the U.S. Co-founder and chairman Dorsey even said during the Q1 2025 earnings call, 'We're building in the United States.' Block's efforts notwithstanding, it will take a few years for the complete onshoring of the Bitcoin mining manufacturing. U.S. manufacturers of mining rigs face the dual challenge of exceeding or at least meeting China's product quality and undercutting its manufacturing costs. The onshoring process could also potentially come to a pause if the U.S. and China reach a long-term consensus on the tariff policy which doesn't put a heavy tax burden on imports of Chinese mining chips. Jack Dorsey declares victory over China in Bitcoin mining chip race first appeared on TheStreet on Aug 13, 2025 This story was originally reported by TheStreet on Aug 13, 2025, where it first appeared. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
25 minutes ago
- Yahoo
MetaMask Is Set to Unveil Plans for New Stablecoin: Source
A MetaMask stablecoin could debut as early as Thursday, a source knowledgeable of the initiative confirmed to Decrypt. The Ethereum wallet provider, which will team up with payment services provider Stripe, will introduce the mmUSD stablecoin as the main trading pair for its various services, according to an Aave governance proposal that appeared last week but was subsequently deleted. DLNews first reported on the deleted proposal. Stablecoin platform M^0 is reportedly supporting the effort. MetaMask's mmUSD comes as interest in stablecoins soars, the result of a more favorable U.S. regulatory environment, the tokens' growing acknowledgement by traditional finance firms and the dramatically successful public offering by stablecoin issuer Circle, which rose nearly 675% in its first two weeks of trading. (Circle has lost a good portion of those gains but is still nearly 400% above its IPO price.) Last month, Congress passed the GENIUS Act, which provides regulatory guidance for the tokens that are generally pegged to the value of the U.S. dollar. Multiple companies in recent months have announced stablecoin projects or said that they were exploring them, including banking giants JP Morgan Chase and Bank of America, and brokerage Robinhood. The stablecoin market currently holds a $280 billion market cap, although U.K. bank Standard Chartered has predicted that total could reach $750 billion by the end of 2026. Ethereum software developer Consensys, which counts MetaMask among its projects, told Decrypt in an email that "it had no comment at this time" on the potential stablecoin, including the timing of an announcement. Decrypt also reached out to Stripe, individuals linked to MetaMask and Aave, and to M^0. (Disclosure: Consensys is one of 22 investors in an editorially independent Decrypt.) Last year, payments giant Stripe acquired stablecoin platform Bridge for a reported $1.1 billion. Bridge's software platform allows businesses to accept stablecoins as payments, and has said that it one day hopes to rival global payments networks such as Swift, Mastercard, and Visa. "Stripe is going to build the world's best stablecoin infrastructure, and, to that end, we are delighted to welcome [Bridge] to Stripe," Stripe CEO Patrick Collison said at the time of the acquisition. JP Morgan Dives Deeper into Stablecoins Despite Jamie Dimon Doubts A recent collaboration between MetaMask and Aave will permit wallet users to generate yield from Aave decentralized liquidity protocols via the MetaMask mobile app. Users will be able to access USDC, USDT and DAI yields, Aave said in a blog post. "The integration makes DeFi earnings simpler and more accessible to everyday users," the post said, adding that "his represents MetaMask Earn's first step into DeFi lending, expanding beyond existing staking options." MetaMask has 100 million users, according to its website. Aave totals over $55 billion in net deposits. On Myriad, a prediction market developed by Decrypt's parent company Dastan, 52% of respondents believe that the Ethereum stablecoin market cap will exceed $145 billion in August. Additional reporting by Stacy Jones.