CE-LINK Releases Breakthrough Zero Standby Power Charger to Redefine Energy Efficient Charging
Triple Intelligent Power Management
The ZSP solution features a multi-mode dynamic power management architecture that intelligently divides system operation into three distinct phases, optimizing energy efficiency across varying load conditions:
1. Active Mode
When a device is connected and charging, the system enters full power output. It employs high-efficiency synchronous rectification (SR) technology, combined with GaN (Gallium Nitride) and advanced silicon-based MOSFETs, achieving a conversion efficiency of over 90%. This significantly reduces conduction losses while supporting the PD3.1 fast charging protocol, making it compatible with smartphones, tablets, laptops, and other devices.
2. Standby Mode
When a device is fully charged but remains connected, the system automatically shifts to a low-power standby state. Using Dynamic Load Detection (DLD) technology, the system continuously monitors output current. If the current falls below a defined threshold (e.g., 5mA), the main power circuit shuts down, leaving only essential monitoring circuitry active. In this mode, standby power consumption is reduced to under 30 mW—over 50% more efficient than conventional designs.
3. Deep Sleep Mode
When no device is connected for 20 minutes, the charger enters an ultra-low power deep sleep mode. All non-essential ICs (such as PWM controllers and protocol chips) are entered into sleep mode, retaining only a microamp-level wake-up circuit.
In this mode, standby power consumption is reduced to below 5mW—approaching the theoretical minimum and cutting energy use by over 90% compared to traditional chargers (typically 10–50mW).
Intelligent Wake-Up: A dedicated sleep pin detects device insertion signals and reactivates the AC-DC main circuit in less than 100ms, ensuring a seamless, delay-free user experience.
Green Engineering for a Low-Carbon Future
The ZSP architecture is more than just a technical milestone—it embodies a forward-thinking approach to sustainable product design. By reducing standby power consumption to near-zero levels, the ZSP charger effectively lowers grid load, cuts carbon emissions, and minimizes environmental impact. As global energy regulations evolve, the ZSP GaN charger meets and exceeds the latest standards, offering a future-ready solution that actively addresses the problem of passive energy waste.
Versatile Application Scenarios
Consumer Electronics: Ideal for smartphone chargers, laptop adapters, and smart home power supplies where energy efficiency matters.
Industrial: Suited for IoT devices, security systems, and sensors that remain idle for extended periods.
Public Infrastructure: Perfect for hotels, airports, and public charging stations where devices are frequently left unplugged, ensuring minimal energy loss during idle periods.
For more information about CE-LINK and its products, please visit www.ce-link.com or contact market@ce-link.com.
About CE-LINK
Founded in 2004, CE-LINK is a technology-focused OEM and ODM manufacturer specializing in advanced consumer electronics solutions. Backed by strong R&D and two decades of precision manufacturing, CE-LINK delivers innovative, globally compliant products. Committed to sustainable development, CE-LINK drives industry progress through technology, empowering a smarter, greener, and more connected lifestyle for consumers worldwide.
Website: www.ce-link.com
LinkedIn: www.linkedin.com/company/ce-link
Facebook: www.facebook.com/CELINK.ELECTRONICS
YouTube: www.youtube.com/@ce-linkelectronics3909
Media Contact
Company Name: CE LINK LIMITED
Email: Send Email
City: Dongguan
State: Guangdong
Country: China
Website: www.ce-link.com
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Canada News.Net
7 hours ago
- Canada News.Net
Neuralink to test brain implant in UK for spinal injury patients
FREMONT, California: Elon Musk's Neuralink is taking its brain-computer interface technology to the UK, with a clinical trial aimed at helping patients with severe paralysis operate devices using only their thoughts. The company announced it will partner with the University College London Hospitals trust and Newcastle Hospitals to conduct the study. Neuralink said the trial will involve patients suffering from conditions like spinal cord injuries and Amyotrophic Lateral Sclerosis (ALS). These individuals may qualify to test the company's implant, which is designed to enable control of digital and physical tools via brain signals. The UK study comes as part of Neuralink's broader efforts to scale human testing of its brain chip. The company began human trials in 2024 after addressing safety issues flagged by the U.S. Food and Drug Administration, which initially rejected its application in 2022. According to Neuralink, five patients with severe paralysis are already using the device to control external tools with their thoughts. Founded in 2016, Neuralink has raised about US$1.3 billion from investors and is reportedly valued at approximately $9 billion, according to PitchBook data cited in media reports. Last month, the company secured $650 million in fresh funding to advance its work on brain-machine interfaces.
Globe and Mail
a day ago
- Globe and Mail
3 Growth Stocks to Invest $1,000 in Right Now
Key Points Amazon's core e-commerce business remains remarkably resilient and continues to dominate the global retail landscape. Nvidia remains the undisputed leader in supplying the advanced chips powering today's artificial intelligence revolution. Meta Platforms leads the social media landscape, operating three of the world's top-five most-used platforms and reaching 3.4 billion daily users. 10 stocks we like better than Nvidia › The last year has been a wild ride for many investors, with a huge swing down in the market in the spring before rocketing back up to today's highs. For investors who want to keep that momentum going, here are four growth-focused companies that would be a smart place to park $1,000. Amazon continues to dominate With all the tariff drama, it makes sense that investors have been a bit wary of Amazon (NASDAQ: AMZN) compared to its big tech rivals. I think this fear is overblown. Yes, the trade war between the U.S. and China could reignite, and this would definitely impact Amazon's business, but any disruptions would more than likely be temporary. Where to invest $1,000 right now? Our analyst team just revealed what they believe are the 10 best stocks to buy right now. Learn More » The fact is, Amazon's e-commerce business is highly resilient, and I don't see its dominance meaningfully threatened. Amazon enjoys a moat that few companies in history have. It is hard to overstate how ingrained it is in the daily lives of consumers across the globe. And beyond its retail business, Amazon Web Services (AWS) -- the company's cloud service -- continues to thrive, growing rapidly in the age of artificial intelligence (AI); revenue was up 17% year over year in the first quarter of 2025. CEO Andy Jassy recently drove home the potential of AWS, saying in an earnings call, "before this generation of AI, we thought AWS had the chance to ultimately be a multi-hundred-billion-dollar revenue run rate business. We now think it could be even larger." Nvidia is still on top It's no secret that the most dominant company leading the most dominant industry is Nvidia (NASDAQ: NVDA). Data centers across the globe, especially those running today's most advanced AI models, are filled to the brim with the company's advanced graphics processing units (GPUs). Thus far, no other chipmaker managed to rival Nvidia when it comes to delivering the most advanced GPUs needed to power modern AI, and although competitors like Advanced Micro Devices have begun to make some headway, Nvidia is still miles ahead. It also has an incredible amount of capital -- dollars and people -- to deploy in defending its lead. While this would already be a substantial moat, Nvidia's CUDA architecture provides it with an incredible advantage. This is a key component, and although it's definitely talked about, it remains poorly understood by investors given its importance. Without going into too much detail, CUDA is essentially a software layer upon which most AI technology is built. If a company is already in Nvidia's ecosystem, switching to rival chips would require the overhaul of their entire workflow, making them unlikely to leave. As a result, Nvidia's ecosystem keeps clients loyal and willing to pay a premium. Meta Platforms dominates social media Meta Platforms (NASDAQ: META) is the undisputed leader in social media. Of the top five most used social media platforms in the world, Meta has No. 1, 3, and 4 in Facebook, Instagram, and WhatsApp. All told, its platforms are actively used by more than 3.4 billion people around the world on a daily basis. This massive user base continues to fuel massive growth for the tech behemoth. Its latest quarterly earnings showed a 22% jump in sales year over year (YOY) and a 38% jump in net income. To capitalize on its success, the company is investing aggressively in its future -- especially in AI -- where its enormous and engaged user base gives Meta a unique advantage. It has access to vast amounts of data to train its models and a captive audience to roll out its AI products to. And unlike some in the AI space, Meta also has the financial strength to continue investing even if the short-term return is less than stellar. Should you invest $1,000 in Nvidia right now? Before you buy stock in Nvidia, consider this: The Motley Fool Stock Advisor analyst team just identified what they believe are the 10 best stocks for investors to buy now… and Nvidia wasn't one of them. The 10 stocks that made the cut could produce monster returns in the coming years. Consider when Netflix made this list on December 17, 2004... if you invested $1,000 at the time of our recommendation, you'd have $625,254!* Or when Nvidia made this list on April 15, 2005... if you invested $1,000 at the time of our recommendation, you'd have $1,090,257!* Now, it's worth noting Stock Advisor's total average return is 1,036% — a market-crushing outperformance compared to 181% for the S&P 500. Don't miss out on the latest top 10 list, available when you join Stock Advisor. See the 10 stocks » *Stock Advisor returns as of July 29, 2025
The Market Online
2 days ago
- The Market Online
PyroGenesis Expands into Europe with First Titanium Powder Order
Montreal-based PyroGenesis Canada Inc. has secured its first commercial contract for titanium metal powder from a European client Europe Metal 3D Printing Market Size & Outlook projected to grow to US$11.2 B by 2030 Titanium is notably classified as a critical mineral by the Canadian government First European Titanium Contract In a notable milestone for its additive manufacturing division, Montreal-based PyroGenesis Canada Inc. (TSX: PYR, OTCQX: PYRGF) has secured its first commercial contract for titanium metal powder from a European client in the advanced manufacturing space, the company announced on July 31. This content has been prepared as part of a partnership with PyroGenesis Inc., and is intended for informational purposes only. The contract marks the company's debut transaction with a European-based engineering and materials science firm focused on additive manufacturing technologies, specifically electron beam melting (EBM) and direct energy deposition (DED). At the heart of the deal is PyroGenesis's Ti-6Al-4V coarse-cut titanium powder, produced using its proprietary NexGen™ plasma atomization system—a process that has recently won praise from some of the most demanding stakeholders in the aerospace and defence sectors. 'This order confirms the readiness of our NexGen™ powder production for demanding, real-world applications,' said CEO P. Peter Pascali in a statement. 'It's a significant commercial validation.' Peter Pascali, CEO of PyroGenesis Canada Inc. Industry and Market Context Additive manufacturing has long promised to disrupt how we build everything from jet engine components to orthopedic implants. But at its core lies a challenge: creating high-purity, uniformly sized metal powders that meet tight tolerances and performance metrics. Additionally, PyroGenesis's entry into this market hasn't gone unnoticed. It's coarse powder product, particularly in the 53–150 µm size range, has already passed rigorous qualification by a major aerospace OEM—widely speculated to be Boeing, which granted the company 'approved supplier' status earlier this year. The current contract, though undisclosed in size, is strategically significant: it reflects a shift in PyroGenesis's European go-to-market strategy, moving from distributor-based sales to direct client engagement, enabling better margins, faster cycles, and deeper integration with OEMs. Metric Details Projected Market Size (2030) US $11.2 billion CAGR (2024–2030) 24.8% Key Industries Driving Growth – Automotive– Aerospace & Aviation– Machinery – Electronics Market Position Europe is a global hub for advanced manufacturing Europe Metal 3D Printing Market Size & Outlook, 2023-2030. (Source: Grandview Research). Titanium Classified as a Critical Mineral PyroGenesis' production of high-quality titanium metal powders is part of its broader three-vertical solution strategy designed to address key economic drivers in global heavy industry. Furthermore, this work falls under the Commodity Security & Optimization vertical. which focuses on advanced material production and technologies—like plasma processing—to recover valuable metals and minerals from industrial waste, enhancing the availability of critical resources. Evidently, titanium is notably classified as a critical mineral by the Canadian government, plays a central role in this initiative. Equally important, PyroGenesis' two other strategic verticals are Energy Transition and Emission Reduction and Waste Remediation. Strategic Pivot to Europe: A $10 Billion Opportunity The deal underscores PyroGenesis's growing focus on the European additive manufacturing market. The market is projected to exceed $11.2 billion by 2030, according to independent industry research. In addition, the company's exit from its distribution arrangement with Aubert & Duval—announced in 2024—freed PyroGenesis to pursue direct sales relationships across the continent. 'This customer is a key technology hub in Europe,' noted Massimo Dattilo, VP of Sales. 'We believe this initial engagement opens the door to more substantial long-term contracts.' Massimo Dattilo, VP of Sales, PyroGenesis Canada Landmark Titanium Orders Additionally, over the past 18 months, PyroGenesis has transformed its metal powder business from pilot-scale shipments to full commercial operations. Given that, in May 2025, it received a landmark 5-tonne titanium powder order from a U.S.-based customer, followed by a 6-tonne reorder—underscoring the sector's readiness to scale. Meanwhile, its NexGen™ production line continues to be a differentiator. Compared to legacy systems, NexGen™ delivers higher throughput, lower cost-per-kilogram, and greater particle size control—making it especially well-suited for aerospace and defence applications where certification is non-negotiable. Another key point, PyroGenesis will host a conference call at 12:00 PM Eastern Time on Thursday, August 7th, 2025. The company will discuss second quarter 2025 financial results ending June, 30, 2025. Join the discussion: Find out what the Bullboards are saying about PyroGenesis Canada Inc. and check out Stockhouse's stock forums and message boards. Stockhouse does not provide investment advice or recommendations. All investment decisions should be made based on your own research and consultation with a registered investment professional. The issuer is solely responsible for the accuracy of the information contained herein. For full disclaimer information, please click here.
