EV maker recalls over 27K vehicles over risk malfunction in key component
Polestar is recalling more than 27,800 of its Polestar 2 electric vehicles in the U.S. over the risk that their rearview camera display might not show an image while backing up.
The electric vehicle maker said in a report submitted to the National Highway Traffic Safety Administration (NHTSA) that the recalled 2021-2025 Polestar 2 vehicles may have 'visualization issues' with their rearview camera display while in reverse and show a 'Camera is temporarily unavailable' notice.
A malfunctioning rearview camera display image can heighten the risk of a crash, according to the NHTSA.
The EV maker produced the Polestar 2s that could potentially experience the rearview camera display issue between July 2020 and late November of last year.
A 'synchronization error between the Parking Assist Camera (PAC) and the Infotainment Head Unit (IHU)' and one in the IHU's video receiving hardware are the source of the problem, Polestar said in the recall report.
Owners of the recalled Polestar 2s can expect to receive letters about the recall on June 19, according to the NHTSA report.
In the recall report, Polestar said it will fix the issue through a software update.
The software remedy will 'always maintain the high-speed signal connection between the PAC and IHU, instead of toggling on and off by request' and will 'add a reset of the IHU video signal receiving hardware in case a synchronization error is detected, instead of just setting an error message,' according to the recall report.
EV Manufacturer Polestar is recalling over vehicles following the discovery of a rear-view camera malfunction.
REUTERS
The Polestar 2 was first available in the U.S. in 2020. However, according to the NHTSA report, the EV maker no longer manufactures them for the U.S. market.
Polestar, which is based in Sweden, sells its various EVs in 27 markets throughout the world.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
an hour ago
- Yahoo
Insurance group approves first container chassis crash guard
A container chassis designed by Stoughton Trailers has received the first award from the Insurance Institute for Highway Safety (IIHS) for protection against rear underride crashes. A rear underride guard is a metal frame attached to the back of a semitrailer to prevent passenger cars from sliding beneath the trailer in the event of a rear-end crash. Underride guards that meet IIHS's safety criteria are more likely than others to withstand an impact, reducing the severity of the crash. Wisconsin-based Stoughton had previously earned the award for its dry vans and refrigerated vans. Now the company's 53-foot intermodal chassis – which carry shipping containers directly transferred from ships or railcars – also meets IIHS's 'Toughguard' criteria, the insurance group announced on Thursday. 'We're excited about the commitment that Stoughton has shown to preventing underride crashes,' said IIHS President David Harkey in a statement. 'Improving the safety of commercial vehicles is a key part of our 30×30 strategy, which targets a 30% reduction in road fatalities by 2030.' IIHS pointed out that in 2022, the National Highway Traffic Safety Administration updated federal regulations governing rear underride protection on large trucks. However, 'the new rule remains far less stringent than the Toughguard requirements and is not expected to push manufacturers to improve,' IIHS contends. Stoughton was among the earliest trailer manufacturers to earn the group's Toughguard safety award for its dry vans and refrigerated trailers in 2017. To date, nine North American trailer manufacturers, including the eight largest, have earned the awards. NHTSA side underride analysis slammed by safety, insurance advocates Trump's NHTSA nominee raises concerns among truck safety advocates US chassis makers allege foreign dumping again Click for more FreightWaves articles by John Gallagher. The post Insurance group approves first container chassis crash guard appeared first on FreightWaves.
Yahoo
6 hours ago
- Yahoo
New trailer type gets strong underride guard
Stoughton extends IIHS-award-winning underride protection to container shipping ARLINGTON, Va., June 12, 2025 (GLOBE NEWSWIRE) -- A Stoughton chassis designed for container transport is the first of its kind to qualify for the Insurance Institute for Highway Safety's TOUGHGUARD award for superior underride protection. Wisconsin-based Stoughton, a leading manufacturer of semitrailers, previously earned the award for its dry vans and refrigerated vans. Now the company's 53-foot intermodal chassis also meets the TOUGHGUARD criteria. The award applies to models built after April 2025. An intermodal chassis is a special type of trailer that can carry shipping containers directly transferred from ships or railcars. 'We're excited about the commitment that Stoughton has shown to preventing underride crashes,' IIHS President David Harkey said. 'Improving the safety of commercial vehicles is a key part of our 30x30 strategy, which targets a 30% reduction in road fatalities by 2030.' A rear underride guard is a metal frame attached to the back of a semitrailer to prevent lower-riding vehicles from sliding beneath the trailer in the event of a rear-end crash. All rear underride guards must meet federal safety standards. However, IIHS research and crash tests have shown that many can buckle or break off in a crash. Underride guards that meet the TOUGHGUARD criteria are substantially more likely to withstand an impact, reducing the severity of the crash. Until now, only dry van, refrigerated and flatbed trailers have qualified. But with the growing importance of shipping containers in global trade, more and more freight is being transported using intermodal chassis. Chassis-type trailers present a unique challenge when it comes to underride protection. The frame of a dry van, refrigerated or flatbed trailer extends across its entire wheelbase, supporting the underride guard for its full width. In contrast, an intermodal chassis is a ladder-like structure that lies between the trailer's wheels to support the removable container. For that reason, the underride guard required a completely new design. Instead of a vertical support attached to the trailer deck, the chassis guard features long, diagonal supports running from the guard's outboard ends to the chassis rails. The National Highway Traffic Safety Administration (NHTSA) updated federal regulations governing rear underride protection on large trucks in June 2022. However, the new rule remains far less stringent than the TOUGHGUARD requirements and is not expected to push manufacturers to improve. 'A major weakness of the federal regulation is that in the required test, the underride guard is bolted to a universal testing rig instead of an actual trailer,' IIHS Senior Test Coordinator Sean O'Malley said. 'When we were developing the TOUGHGUARD program, we found that many underride guards that survived testing attached to NHTSA's rig broke off when attached to the trailer they were built to be used on, either because the attachment points on the trailer failed or the bolts did.' In contrast, IIHS evaluates underride guards on the trailers they are designed for. In the IIHS test, a midsize car crashes into the back of the parked trailer at 35 mph in three configurations, hitting the trailer with its full width, a 50% overlap and a 30% overlap. To earn the IIHS award, the guard must prevent underride in all three configurations. The 30% overlap configuration — which was left out of the new federal requirements — is the most challenging, because only the corner of the underride guard must absorb all the force of the impact. Initially, these tests were conducted in-house. Now IIHS allows trailer manufacturers to submit data and footage from tests conducted at their own facilities or by contractors for IIHS experts to review. The tests of Stoughton's intermodal chassis were conducted by Calspan. Stoughton was also among the earliest trailer manufacturers to earn a TOUGHGUARD award for its dry vans and refrigerated trailers in 2017. To date, nine North American trailer manufacturers, including the eight largest, have earned TOUGHGUARD awards. ### For more information, go to The Insurance Institute for Highway Safety (IIHS) is an independent, nonprofit scientific and educational organization dedicated to reducing deaths, injuries and property damage from motor vehicle crashes through research and evaluation and through education of consumers, policymakers and safety professionals. IIHS is wholly supported by auto insurers. CONTACT: Joe Young Insurance Institute for Highway Safety 504-641-0491 jyoung@ in to access your portfolio
Miami Herald
10 hours ago
- Miami Herald
Mazda Voluntarily Recalls 171,000 Vehicles Due to Possible Airbag Fault
Mazda has initiated a safety recall for 171,412 of its late-model vehicles due to a software issue that could disable the airbags. The recall impacts 2024 and 2025 model-year Mazda 3 and CX-30 vehicles. Mazda has stated it is not aware of any accidents or injuries resulting from this issue. The recall includes 119,555 CX-30 crossovers and 51,857 Mazda 3 sedans and hatchbacks. According to documents filed with the National Highway Traffic Safety Administration (NHTSA), the defect lies within the Sophisticated Airbag Sensor (SAS) unit. The issue occurs under a specific, unusual circumstance: if the vehicle's battery is completely drained while the ignition is left in the "ON" position. This specific action can cause the SAS unit to store an internal fault. When the vehicle's battery is subsequently recharged and the car is started, this stored fault triggers the airbag warning light on the dashboard and, critically, deactivates the vehicle's airbags, preventing them from deploying in the event of a collision. Mazda has confirmed that dealers have already been notified of the issue. The solution involves a software update to the existing SAS unit. Dealers will reprogram the module with improved software or, if necessary, replace the unit entirely. The repair will be performed free of charge as all 171,412 affected vehicles are still covered by their original factory warranty. Owners of the affected 2024 and 2025 Mazda 3 and CX-30 models will be formally notified by mail. The automaker expects to complete all owner notifications by the end of July 2025, instructing them to bring their vehicle to an authorized dealer for the repair. Related: Porsche Drops Truth Bomb on U.S. Production Plans Amid Tariff Negotiations Copyright 2025 The Arena Group, Inc. All Rights Reserved.
