
Pune civic body begins GRP coating of streetlight poles in slum areas
To prevent electric shocks from streetlight poles—especially during the monsoon—the Pune Municipal Corporation (PMC) has initiated the application of glass-reinforced plastic (GRP) coating on poles located in slum settlements and other high-risk areas across the city.
There are around 1.65 lakh streetlight poles under PMC limits. Of these, about 25% are located in densely populated areas, water-logging zones, and areas with high pedestrian movement—making them more vulnerable during rains.
To address this, PMC has started two key measures such as replacing old electric poles with new fiber-reinforced plastic (FRP) shockproof poles and applying epoxy coating on existing mild steel poles to prevent current leakage.
Currently, PMC has started applying GRP coating on poles in areas like Sinhagad Road, Janta Vasahat, Ekta Nagar, Ahmednagar Road, and along the Palkhi route. Officials say the coating helps insulate the poles and reduces the risk of electric shock in wet conditions.
Manisha Shekatkar, chief superintendent engineer of PMC's electrical department, said, 'We started the work last week and have set a target of coating 1,000 street poles. These poles are located in slum clusters, crowded spots, low-lying areas, and places prone to waterlogging.'
Shekatkar added that ward offices have been asked to identify and send data on high-risk poles in their areas.
'We are using GRP coating. It takes over two hours to dry under sunlight. If the weather is clear, we manage to coat about 10–12 poles a day. However, due to the rain, we are facing difficulty, she said.
According to civic officials, the epoxy coating acts as an insulating layer, preventing direct contact between exposed metal parts and rainwater, which often leads to short circuits and electric leakages.
Along with this, PMC is also replacing old poles with safer FRP ones. 'Last year, our target was to replace 1,600 poles, out of which 1,300 have been done. This year, we will take up another 1,600 pole replacements,' she added.
The civic body has formed quick response teams comprising officials from the electrical, road, building, and drainage departments to identify hazardous poles and carry out preventive maintenance. These teams are also tasked with inspecting poles for illegal electricity tapping—a common but dangerous practice in some localities.
Civic activists, however, have pointed out that preventive measures such as this should have been a regular part of PMC's pre-monsoon safety drive. 'While the epoxy coating is a welcome step, it's a reactive measure. There needs to be a long-term plan to upgrade electrical infrastructure, especially in slums,' said Pramod Devkar, a local civic activist of Ahmednagar road area.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Hindustan Times
2 days ago
- Hindustan Times
Pune civic body begins GRP coating of streetlight poles in slum areas
To prevent electric shocks from streetlight poles—especially during the monsoon—the Pune Municipal Corporation (PMC) has initiated the application of glass-reinforced plastic (GRP) coating on poles located in slum settlements and other high-risk areas across the city. There are around 1.65 lakh streetlight poles under PMC limits. Of these, about 25% are located in densely populated areas, water-logging zones, and areas with high pedestrian movement—making them more vulnerable during rains. To address this, PMC has started two key measures such as replacing old electric poles with new fiber-reinforced plastic (FRP) shockproof poles and applying epoxy coating on existing mild steel poles to prevent current leakage. Currently, PMC has started applying GRP coating on poles in areas like Sinhagad Road, Janta Vasahat, Ekta Nagar, Ahmednagar Road, and along the Palkhi route. Officials say the coating helps insulate the poles and reduces the risk of electric shock in wet conditions. Manisha Shekatkar, chief superintendent engineer of PMC's electrical department, said, 'We started the work last week and have set a target of coating 1,000 street poles. These poles are located in slum clusters, crowded spots, low-lying areas, and places prone to waterlogging.' Shekatkar added that ward offices have been asked to identify and send data on high-risk poles in their areas. 'We are using GRP coating. It takes over two hours to dry under sunlight. If the weather is clear, we manage to coat about 10–12 poles a day. However, due to the rain, we are facing difficulty, she said. According to civic officials, the epoxy coating acts as an insulating layer, preventing direct contact between exposed metal parts and rainwater, which often leads to short circuits and electric leakages. Along with this, PMC is also replacing old poles with safer FRP ones. 'Last year, our target was to replace 1,600 poles, out of which 1,300 have been done. This year, we will take up another 1,600 pole replacements,' she added. The civic body has formed quick response teams comprising officials from the electrical, road, building, and drainage departments to identify hazardous poles and carry out preventive maintenance. These teams are also tasked with inspecting poles for illegal electricity tapping—a common but dangerous practice in some localities. Civic activists, however, have pointed out that preventive measures such as this should have been a regular part of PMC's pre-monsoon safety drive. 'While the epoxy coating is a welcome step, it's a reactive measure. There needs to be a long-term plan to upgrade electrical infrastructure, especially in slums,' said Pramod Devkar, a local civic activist of Ahmednagar road area.


Hindustan Times
4 days ago
- Hindustan Times
PMC forms quick response teams for monsoon emergencies
The Pune Municipal Corporation (PMC) has constituted Quick Response Teams (QRTs) in all ward offices to tackle waterlogging and drain blockages during the monsoon. The teams will be on standby to respond urgently to rain-related emergencies across the city. Each team will work under the supervision of the assistant municipal commissioner and will include officers from the sewerage, road, motor vehicles, building and engineering departments at the ward level. The main task of the team will be to prevent waterlogging on roads and take immediate action in the event drains or sewers get blocked during heavy rain. On Tuesday, additional municipal commissioner B P Prithviraj issued an order to that effect and deputed QRTs to each ward office. Ganesh Sonune, head of the disaster management department of the PMC, said, 'We form QRTs every year but this time, we have made them more comprehensive. Officials from all key departments, along with ward-level officers, have been included in the teams. The teams now include engineers from the road, building permissions, drainage, and motor vehicles departments so that decisions can be taken on the spot with the help of the concerned officials.' PMC officials said that special machines like jetting, suction, grabbers, and JCBs will be available round-the-clock to support these teams. The teams will operate in both day- and night- shifts to ensure quick relief and smooth drainage during the rainy season. The remaining 20% of cleaning work is expected to be completed by June 7, officials said. 'The cleaning work is being carried out across the city in both day- and night- shifts using available machinery like jetting machines, suction recyclers, grab machines, and JCBs,' a senior official said. However, authorities acknowledged that despite pre-monsoon preparations, emergency blockages can occur during heavy rain leading to waterlogging or sewer overflow in certain areas. The QRTs are being formed to address such situations, they said.


Hindustan Times
6 days ago
- Hindustan Times
PMC to depute junior engineer to irrigation department's flood control room
After last year's flood-like situation on Sinhgad Road near Ektanagari, triggered by additional discharge from Khadakwasla dam, the Pune Municipal Corporation (PMC) has decided to depute a junior engineer to irrigation department's flood control room for improved coordination. Additional municipal commissioner Prithviraj BP said the decision was taken during a pre-monsoon review meeting held on Tuesday by Municipal Commissioner Naval Kishore Ram. 'Last year, there was a communication gap between the PMC and the irrigation department. The city received an additional discharge from the dam without prior intimation, which led to flooding on Sinhgad Road. To avoid such situations this year, an officer from the PMC will now be stationed at the irrigation department's flood control room to ensure timely updates and better coordination,' he said. The municipal commissioner also directed ward offices to hire essential equipment such as JCBs during the rainy season without waiting for approvals from the head office.