This 3D Printer Has Four Different Extruders. It's the Best Thing Snapmaker's Ever Made

CNET

a day ago

Snapmaker's 3D printers don't always follow trends. The original Snapmaker was a small three-in-one machine that could be a 3D printer, laser cutter or CNC, depending on the type of tool head you use. For years, the company has iterated on that idea, culminating in the much larger Artisan model. After that, Snapmaker tried a dual-nozzle 3D printer called the J1. In my review of the J1, I liked that the nozzles could print two models at the same time, reducing the time it takes to print batches, but I felt the cost was prohibitive.
With the advent of multicolor systems, Snapmaker could have gone the way of Bambu Lab, Anycubic and other companies and made an AMS system to filter four colors into one nozzle, but -- true to form -- it went in another direction. The U1 is a four-tool head 3D printer that uses independent tool heads to print four different colors or even four different materials. It's a system that can work well or fail utterly. Now, Snapmaker has made a tool changer that not only works well but works out of the box with little to no setup time. I've been having fun with it for a few weeks now.
This tool is a smart way to do multimaterial printing that reduces almost all of the waste that most color systems produce. It's a joy to use and I can see it becoming a staple in many workshops this year.
James Bricknell/CNET
What's the difference between a tool changer and an AMS?
Tool changers and AMS are both mechanisms to allow a 3D printer to use different materials -- often different colors of the same material, or a material used to support a different material -- without the need to swap the filament manually.
The AMS does this by automatically loading and unloading the filament from the hot end each time a color change is needed. The advantage of the AMS is that it only requires one fairly standard hot end with a splitter on the 3D printer itself. The AMS unit, which can be bought separately, does most of the heavy lifting in this situation rather than the printer itself. The disadvantage is the large amount of waste the AMS produces. It has to purge a lot of filament from the nozzle each time it changes colors and materials to make sure they don't mix on the print itself.
The Snapmaker U1's waste, shown on the right, is far less than that of a normal AMS color 3D printer
James Bricknell/CNET
A tool changer like the Snapmaker U1 circumvents the waste issue by having four separate hot ends and, therefore, four separate nozzles. This allows each nozzle to stay uncontaminated by any other material, thereby reducing the waste output to just the purge tower. This also speeds up the entire process, as the mechanical switching of the tool heads is much faster than the purging required by the AMS. I printed the same model on the Anycubic S1 and the Snapmaker U1, and though the colors are a little different, you can see that the S1's waste (pictured on the left) is far greater than the U1's.
The big disadvantages of a tool changer are the extra mechanisms that can malfunction and the price. Four tool heads mean four more areas for things to go wrong, like blockages, worn nozzles and, because the tool heads need to be swapped, a chance for them to be knocked over as they load and unload. The price is also a limiting factor as tool changers tend to be more expensive than their AMS cousins. The Snapmaker U1 is available on Kickstarter as of Aug. 19, 2025, with an early-bird price of $749 and a standard Kickstarter price of $799. Even the suggested retail price is competitive with other high-end 3D printers at $999, keeping it suitable for small businesses and hobbyists.
It's also worth noting that having four tool heads doesn't change the natural properties of the materials you're using. PLA still won't stick to PETG, and TPU won't magically start sticking either. What it does allow, though, is to use these products in conjunction with each other without risk of mixing them up in the nozzle.
While some of these prints aren't perfect, that seems to be an issue with the software rather than the hardware
James Bricknell/CNET
My Snapmaker U1 makes good-quality prints. Some have even been great, but there's still work to be done. I don't think the issue is mechanical, though. The Snapmaker uses a forked version of OrcaSlicer, and while I like Orca as a slicer, this version isn't yet finished. I'm using a prerelease version, and I hope to see many more updates to the software before the end of the Kickstarter. Right now, it lacks good profiles for the most common filaments, and this causes a lot of stringing if you don't tune the settings yourself.
The tool changers work well in delivering material, with no break in the printing process. The entire 3D printer is fast, accurate and, with some fine-tuning, will be capable of truly excellent prints in short order. I used it to make my kids some flexi dragons with a touch of color -- just white eyes, teeth and claws -- and it printed them at the same speed as if it were only one color. That type of speed is going to be what separates the U1 from the competition, especially with such a competitive price tag. While almost all of the prints had stringing on them, there was little in the way of defects. The single-color prints were all as flawless as you would expect from a modern 3D printer and could be easily sold on an Etsy shop -- while you still can, that is -- with no real post-processing needed
The initial setup was also fast and simple compared to other tool changers I've used. The entire 3D printer was already assembled, and the configuration took around 15 minutes to make sure the tool changers were aligned and ready to go. This kind of out-of-the-box printing is becoming a prerequisite for consumer printers, so it's good to see that Snapmaker is trying to simplify the startup procedure. Simplification is a big part of the U1. Each filament roll has an auto loader that makes loading the filament a breeze, and you can unload all the material at the same time if you want. Fast and simple.
I would like to see a few changes to the onboard operating system, but they will likely happen as the platform evolves. The color selections for each filament are terrible and need to be addressed, as it's hard to select a color that matches your filament. That being said, if you're using a USB dongle to transfer files, you get to map the colors on the file to the colors on your printer, so that's handy.
James Bricknell/CNET
This hands-on has given me a chance to see what the Snapmaker U1 is capable of and while I haven't spent enough time with it to give it a definitive review, I do think it's worthy of your time and money. The prints are of good quality, and the four tools give you a lot of scope to try new and interesting ways to combine materials. Tool changers are still a niche style of 3D printer, and they need a few good products in the space to help them gain more popularity. The Snapmaker U1 is going to be a great way to enter this new market, and with the Kickstarter offering a decent discount, you can do so without breaking the bank.