Hold fire if you're shopping for a drawing tablet – new Wacom Cintiqs are coming
When you buy through links on our articles, Future and its syndication partners may earn a commission.
Wacom Cintiq tablets have long been a fixture in our pick of the best drawing tablets, and we'll soon have a new trio of devices to review. The Japanese company has today announced the launch of a new generation of Cintiq pen displays with a thinner builds and higher resolution.
We're told the new Wacom Cintiq 16, Cintiq 24 and Cintiq 24 Touch will have a slim, fanless design to reduce noise and make them more practical for moving about. The 24-inch models will be nearly half the thickness of the previous 22-inch mode at just 21mm.
Image 1 of 2
Image 2 of 2
The new Cintiq 16 gets a resolution boost from 1,920 x 1,080 to 2,560 x 1,600 pixels. The 24in models (pen-only or pen + touch) have QHD resolution of 2560 x 1440 and will come with an adjustable stand.
All three models support USB-C connection. They'll still use the existing Pro Pen 3. Direct bonding minimises the gap between pen tip and cursor. They'll also inherit the more expensive Cintiq Pro range's anti-glare etched glass, replacing the previous models' film to better reduce reflection and eye fatigue.
Image 1 of 2
Image 2 of 2
Wacom's also announced the launch of a new Pro Pen 3 Wood Grip as an optional extra. It says this provides a more natural feel in the hand.
The tablets are slated for released in the northern hemisphere summer, so I presume within the next couple of moths. You'll be able to learn more at the Wacom websit. For comparison, see our pick of the best Wacom tablets.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
2 hours ago
- Yahoo
FAA requires SpaceX to investigate Starship Flight 9 mishap
When you buy through links on our articles, Future and its syndication partners may earn a commission. SpaceX needs to figure out what happened on the ninth test flight of its Starship megarocket, the U.S. Federal Aviation Administration (FAA) has decreed. Flight 9, which lifted off from SpaceX's Starbase site in South Texas on Tuesday (May 27), ended in the destruction of both of Starship's stages — its Super Heavy booster and Ship upper stage (which is also sometimes known, somewhat confusingly, as Starship). But the FAA, which grants launch licenses for U.S. operators, is only concerned about one of those explosive events. "The mishap investigation is focused only on the loss of the Starship vehicle, which did not complete its launch or reentry as planned," FAA officials wrote in an update today (May 30). "The FAA determined that the loss of the Super Heavy booster is covered by one of the approved test induced damage exceptions requested by SpaceX for certain flight events and system components," the agency explained. "The FAA evaluated each exception prior to launch approval and verified they met public safety requirements." SpaceX broke new ground on Flight 9, reusing a Super Heavy for the first time ever. This particular booster first flew on Flight 7 in January, acing its engine burn and then returning to Starbase for a successful and dramatic catch by the launch tower's "chopstick" arms. The company did not attempt another catch on Flight 9. It conducted a variety of experiments with the booster, including bringing it down to Earth on a higher "angle of attack" to increase atmospheric drag. So, for safety's sake, SpaceX steered Super Heavy toward a "hard splashdown" in the Gulf of Mexico on Tuesday. This didn't quite work out, however. "Contact with the booster was lost shortly after the start of landing burn when it experienced a rapid unscheduled disassembly approximately 6 minutes after launch, bringing an end to the first reflight of a Super Heavy booster," SpaceX wrote in a Flight 9 recap. Ship had an even harder time on Flight 9. The upper stage was supposed to make a soft splashdown in the Indian Ocean off the coast of Western Australia about 65 minutes after launch, but it suffered an "attitude control error" that prevented the vehicle from getting into the proper orientation for reentry. "Starship then went through an automated safing process to vent the remaining pressure to place the vehicle in the safest condition for reentry," SpaceX wrote in the recap. "Contact with Starship was lost approximately 46 minutes into the flight, with all debris expected to fall within the planned hazard area in the Indian Ocean." Related stories: — SpaceX reached space with Starship Flight 9 launch, then lost control of its giant spaceship (video) — Starship and Super Heavy explained — SpaceX loses Starship rocket stage again, but catches giant Super Heavy booster during Flight 8 launch (video) This was still a considerable improvement over Ship's performance on its previous two liftoffs. On both Flight 7 and Flight 8 (which launched in March), Ship was lost less than 10 minutes after liftoff, raining debris down over the Atlantic. There have been no reports of injuries or damage to public property as a result of the Flight 9 mishap, according to the FAA. There were also minimal effects on flights in U.S. airspace — an improvement over the previous two Starship launches. "The FAA activated a Debris Response Area, out of an abundance of caution, when the Super Heavy booster experienced its anomaly over the Gulf of America during its flyback toward Texas," FAA officials wrote. "The FAA subsequently determined the debris did not fall outside of the hazard area," they added. "During the event, there were zero departure delays, one flight was diverted, and one airborne flight was held for 24 minutes."
Yahoo
2 hours ago
- Yahoo
How to connect Nintendo Switch 2 to your TV or monitor
When you buy through links on our articles, Future and its syndication partners may earn a commission. The Nintendo Switch 2 might be designed for portable gaming, but its real magic happens when you connect it to your TV or monitor for the full big-screen experience. Maybe you're settling in for a marathon Mario Kart World gaming session, or simply want to show off your skills. Docking your Switch 2 transforms it from a handheld device into a proper home console. The setup process is refreshingly simple, requiring just a few cable connections and the included dock. Nintendo has streamlined the entire experience to get you gaming on the big screen as quickly as possible. Follow these simple steps and you'll have your Switch 2 connected and displaying games on the big screen in just a few minutes. (Image: © Tom's Guide) Take off the back panel of the Switch 2 dock by pulling it back from the top. This reveals all the connection ports you'll need for setup. Keep the panel somewhere safe while you're connecting cables, as you'll need to put it back on later. (Image: © Tom's Guide) Plug one end of an HDMI cable into the middle port on the dock (it's clearly marked and sits between the other two ports). Then connect the other end to any available HDMI input on your TV or monitor. Make sure both connections are secure and remember which HDMI input you're using so you can select it later. (Image: © Tom's Guide) Plug the Nintendo Switch 2 power adapter into the dock's power port, then connect the other end to a wall outlet. For best results, use only the official Nintendo power adapter that came with your Switch 2. (Image: © Tom's Guide) Position the dock on a stable, flat surface near your TV where it won't get knocked over. It's also a good idea to ensure there's adequate ventilation around the dock as it will generate heat during your gaming sessions. (Image: © Tom's Guide) Gently slide your Nintendo Switch 2 into the dock with the screen facing the same direction as the dock's front opening. Turn on your TV or monitor and use your remote to select the HDMI input you connected earlier. Your Switch 2 will automatically detect the connection and switch to docked mode for big-screen gaming. Now sit back and enjoy your games with improved resolution and performance on the big screen! Now you've learned how to connect your Nintendo Switch 2 to your TV monitor, why not take a look at our other useful Switch 2 guides? If you're unboxing, check out how to set up a Nintendo Switch 2. If you have a first generation console and are looking to transfer over your data, we can help you with that too.
Yahoo
4 hours ago
- Yahoo
Hold fire if you're shopping for a drawing tablet – new Wacom Cintiqs are coming
When you buy through links on our articles, Future and its syndication partners may earn a commission. Wacom Cintiq tablets have long been a fixture in our pick of the best drawing tablets, and we'll soon have a new trio of devices to review. The Japanese company has today announced the launch of a new generation of Cintiq pen displays with a thinner builds and higher resolution. We're told the new Wacom Cintiq 16, Cintiq 24 and Cintiq 24 Touch will have a slim, fanless design to reduce noise and make them more practical for moving about. The 24-inch models will be nearly half the thickness of the previous 22-inch mode at just 21mm. Image 1 of 2 Image 2 of 2 The new Cintiq 16 gets a resolution boost from 1,920 x 1,080 to 2,560 x 1,600 pixels. The 24in models (pen-only or pen + touch) have QHD resolution of 2560 x 1440 and will come with an adjustable stand. All three models support USB-C connection. They'll still use the existing Pro Pen 3. Direct bonding minimises the gap between pen tip and cursor. They'll also inherit the more expensive Cintiq Pro range's anti-glare etched glass, replacing the previous models' film to better reduce reflection and eye fatigue. Image 1 of 2 Image 2 of 2 Wacom's also announced the launch of a new Pro Pen 3 Wood Grip as an optional extra. It says this provides a more natural feel in the hand. The tablets are slated for released in the northern hemisphere summer, so I presume within the next couple of moths. You'll be able to learn more at the Wacom websit. For comparison, see our pick of the best Wacom tablets.
