Latest news with #Dongfeng
NZ Autocar
5 days ago
- Automotive
- NZ Autocar
Nissan may sell its HQ to save funds
Amid a series of cost-cutting efforts (outlined here) in its fight for survival, Nissan may sell off its global headquarters. Following a massive loss reported for the last financial year the struggling Japanese automaker may sell off its Yokohama base. Located in the Minato-Mirai 21 district, the building is estimated to be worth over 100 billion yen ($NZ1.2b). Now Nikkei Asia reports the building appears on a list of assets Nissan intends to sell before the end of the financial year. The company's newly appointed CEO, Ivan Espinosa, has announced upcoming asset sales. However, he has not yet specifically mentioned Nissan HQ. If it does sell, it may lease the building instead. McLaren did a similar thing a few years ago. Some of Sunderland's spare capacity might be used by Chinese partner, Dongfeng. Nissan is embarking on a major cost-cutting scheme. It will likely close up to seven factories, including two domestic sites. The workforce will significantly downsize, with 20,000 jobs going in the coming years. Espinosa said that former management mishandled things by opting to go large in 2015. Nissan started building more plant and was aiming for sales of eight million units eventually. Now it is selling under half that annually. Nissan is also halting the development of certain models to cut costs. Six vehicle platforms will go, leaving just seven in the line-up. The company is also busy unifying more products and in doing so will reduce parts complexity by 70 percent. Nissan is also trying to determine how to survive on its own after a recent failed merger with Honda. Around 3000 R&D staff are now working on cost cutting initiatives. New Euro-only Micra is based heavily on Renault 5. Badge-engineered cars like the Micra/Renault 5 will help bring new models to market at a reduced cost. Nissan will also strengthen its partnership with Mitsubishi to accelerate the development of new products. It might even allow its Chinese partner, Dongfeng, to build cars at some of its underused factories, like Sunderland.
The Advertiser
20-05-2025
- Automotive
- The Advertiser
Nissan Frontier Pro: Chinese-made PHEV ute could take on BYD Shark in Australia
Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could "absolutely fit" within the local portfolio. "I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market," Mr Humberstone said. "What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit." Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now. Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara, with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. The new Navara, meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new "one-ton pickup" will "leverage Nissan's partnership with Mitsubishi Motors", and will be the most advanced of the three utes. Nissan's global announcement of this new model says "FY26" timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest! Would you consider the Frontier Pro Plug-in Hybrid if it was sold in Australia? MORE: Nissan confirms five new models for Australia within the next two yearsMORE: Nissan Frontier Pro – New Chinese PHEV ute will be sold outside ChinaMORE: Everything Nissan Navara Content originally sourced from: Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could "absolutely fit" within the local portfolio. "I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market," Mr Humberstone said. "What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit." Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now. Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara, with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. The new Navara, meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new "one-ton pickup" will "leverage Nissan's partnership with Mitsubishi Motors", and will be the most advanced of the three utes. Nissan's global announcement of this new model says "FY26" timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest! Would you consider the Frontier Pro Plug-in Hybrid if it was sold in Australia? MORE: Nissan confirms five new models for Australia within the next two yearsMORE: Nissan Frontier Pro – New Chinese PHEV ute will be sold outside ChinaMORE: Everything Nissan Navara Content originally sourced from: Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could "absolutely fit" within the local portfolio. "I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market," Mr Humberstone said. "What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit." Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now. Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara, with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. The new Navara, meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new "one-ton pickup" will "leverage Nissan's partnership with Mitsubishi Motors", and will be the most advanced of the three utes. Nissan's global announcement of this new model says "FY26" timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest! Would you consider the Frontier Pro Plug-in Hybrid if it was sold in Australia? MORE: Nissan confirms five new models for Australia within the next two yearsMORE: Nissan Frontier Pro – New Chinese PHEV ute will be sold outside ChinaMORE: Everything Nissan Navara Content originally sourced from: Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could "absolutely fit" within the local portfolio. "I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market," Mr Humberstone said. "What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit." Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now. Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara, with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. The new Navara, meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new "one-ton pickup" will "leverage Nissan's partnership with Mitsubishi Motors", and will be the most advanced of the three utes. Nissan's global announcement of this new model says "FY26" timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest! Would you consider the Frontier Pro Plug-in Hybrid if it was sold in Australia? MORE: Nissan confirms five new models for Australia within the next two yearsMORE: Nissan Frontier Pro – New Chinese PHEV ute will be sold outside ChinaMORE: Everything Nissan Navara Content originally sourced from:
West Australian
20-05-2025
- Automotive
- West Australian
Nissan Frontier Pro: Chinese-made PHEV ute could take on BYD Shark in Australia
Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could 'absolutely fit' within the local portfolio. 'I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market,' Mr Humberstone said. 'What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit.' Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now . Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara , with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. The new Navara , meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new 'one-ton pickup' will 'leverage Nissan's partnership with Mitsubishi Motors', and will be the most advanced of the three utes. Nissan's global announcement of this new model says 'FY26' timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest! Would you consider the Frontier Pro Plug-in Hybrid if it was sold in Australia? MORE: Nissan confirms five new models for Australia within the next two years MORE: Nissan Frontier Pro – New Chinese PHEV ute will be sold outside China MORE: Everything Nissan Navara
7NEWS
20-05-2025
- Automotive
- 7NEWS
Nissan Frontier Pro: Chinese-made PHEV ute could take on BYD Shark in Australia
Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could 'absolutely fit' within the local portfolio. 'I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market,' Mr Humberstone said. 'What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit.' Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now. Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara, with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. The new Navara, meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new 'one-ton pickup' will 'leverage Nissan's partnership with Mitsubishi Motors', and will be the most advanced of the three utes. Nissan's global announcement of this new model says 'FY26' timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest!
Perth Now
20-05-2025
- Automotive
- Perth Now
Nissan Frontier Pro: Chinese-made PHEV ute could take on BYD Shark in Australia
Nissan Australia's boss has indicated the Japanese company's local division considering the recently revealed Frontier Pro Plug-in Hybrid dual-cab ute for the local market. Speaking with CarExpert, vice president and managing director for Nissan Australia, Andrew Humberstone, said the plug-in truck co-developed with China's Dongfeng could 'absolutely fit' within the local portfolio. 'I see no problem with that running in parallel to new Navara. It's about 'does the business case work?' I think it takes about six months to get right-hand drive. I think it could potentially work for the market,' Mr Humberstone said. 'What we've been told officially – this is a joint venture with Dongfeng, obviously – the car is available for export, we are one of the markets which could be considered. I think it could be a very interesting product for us to look at. I think it could absolutely fit.' Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now. Frontier Pro PHEV Credit: CarExpert Revealed at last month's Shanghai motor show, the Nissan Frontier Pro Plug-in Hybrid is a Chinese collaboration with joint venture partner Dongfeng, based on the former's Z9 ute rather than the D40 Navara-derived Frontier pickup sold in the United States. The brightly-coloured Frontier Pro PHEV is Nissan's first plug-in hybrid model globally, and also its first-ever electrified ute. Power comes from a turbocharged 1.5-litre four-cylinder petrol engine with a transmission-mounted electric motor, for total system outputs of 300kW of power and 800Nm of torque. Nissan claims EV range of 135km on the CLTC cycle, and fuel consumption of 6.9L/100km. Vehicle-to-load (V2L) capability supplies up to 6kW of power and allows you to power external appliances via outlets in the tub. Braked towing capacity is 3500kg – matching the Navara – with a wading depth of 700mm. Supplied Credit: CarExpert Supplied Credit: CarExpert The Frontier Pro also features five-link rear suspension, and comes standard with four-wheel drive and 18-inch alloy wheels wearing 265/65 R18 tyres. An electromechanical rear differential lock is available, while there are selectable hybrid, electric, performance and snow drive modes. Inside, there's a 10-inch digital instrument cluster and a 14.6-inch touchscreen infotainment system. It's a much more luxurious interior than our Navara, with the front seats available with heating, ventilation and massage, and a panoramic sunroof bathing the cabin with light. The Frontier Pro revealed in Shanghai also has a colourful interior, with yellow upholstery and matching yellow trim on the dashboard and doors. Teaser Credit: CarExpert Edited Credit: CarExpert The new Navara, meanwhile, arrives in Australia next year and is yet to be revealed. Mr Humberstone indicated we could see a reveal or at least preview of the production model around November 2025. Interestingly, the image above is of the facelifted NP300 Navara/Frontier that will arrive in Latin American markets during the 2026 Japanese financial year. This indicates the Latin American Navara/Frontier will be a significant facelift of the current D23 model, meaning Nissan will be producing three different mid-size pickups globally. Of most importance to us is the upcoming Thai-built Navara, which is destined for the Oceania region which includes Asia and Australia. This new 'one-ton pickup' will 'leverage Nissan's partnership with Mitsubishi Motors', and will be the most advanced of the three utes. Nissan's global announcement of this new model says 'FY26' timing, though the Japanese market's financial year uses 'fiscal year' timing – i.e. April 1, 2026 to March 31, 2027. This likely means the next-generation Navara won't hit Australian showrooms until the second half of the 2026 calendar year. Stay tuned to CarExpert for all the latest! Supplied Credit: CarExpert Would you consider the Frontier Pro Plug-in Hybrid if it was sold in Australia? MORE: Nissan confirms five new models for Australia within the next two yearsMORE: Nissan Frontier Pro – New Chinese PHEV ute will be sold outside ChinaMORE: Everything Nissan Navara
