Latest news with #LONGiSolar
Malaysian Reserve
27-05-2025
- Business
- Malaysian Reserve
102MW! LONGi signs supply agreement with Finnish energy company for Hi-MO X10 back contact modules
HELSINKI, May 27, 2025 /PRNewswire/ — LONGi Solar has entered a strategic partnership with a leading Finnish energy enterprise to supply 102MW of Hi-MO X10 back contact modules. This agreement is a significant milestone for LONGi in expanding its presence in the Nordic market and will contribute to advancing sustainable energy solutions in the region. The collaboration spans sectors including hospitals, schools, shopping centers, and warehouses with the aim of reducing electricity costs for public infrastructure. The project is expected to lower annual carbon dioxide emissions by approximately 105,672 to 163,200 tons, contributing to both economic efficiency and environmental goals. By the end of 2024, Finland had increased its cumulative solar photovoltaic capacity to approximately 1.2 GW, up from 1.0 GW in 2023. Back contact modules are well suited to the Finnish market due to their strong performance in low-light conditions and their structural reliability under high snow loads. Their design also supports off-grid applications and provides a consistent aesthetic that aligns with regional expectations for building integration. Han Ziwei, General Manager of LONGi Nordic, said: ' This cooperation marks the first delivery of Hi-MO X10 modules in one of the highest latitude regions, representing a key milestone in the global deployment of back contact technology. The project underscores the potential of the Hi-MO X10 to perform reliably across a range of application scenarios and climatic conditions, supporting the development of a more diversified renewable energy mix in the Nordic region and beyond.' Technology empowerment to assist Finland's green development The Hi-MO X10 solar module uses advanced Back Contact (BC) technology, enabling a mass-produced module efficiency of up to 24.8%. In Finland, where winter conditions and lower solar irradiation pose challenges, high-efficiency modules can help optimize power generation on rooftops and other limited-use areas, contributing to reliable energy supply and long-term cost-effectiveness. Finland's long and cold winters require solar modules with strong low-light performance and high mechanical resilience. The Hi-MO X10 meets these requirements through its back contact architecture and load-bearing design. The module is designed to operate reliably in extreme low temperatures and under long-term snow accumulation. It also reduces hot-spot temperatures in shaded conditions, minimizing the risk of localized overheating and supporting stable, long-term system performance. The module is also outstanding in weak light environments. The advanced back contact technology increases responsiveness in low-light conditions and extends daily power generation hours, contributing to higher overall energy yield. In addition, the design of the Hi-MO X10 aligns with the Nordic architectural style, offering a uniform appearance that integrates well into the built environment while maintaining practical performance standards. Since 2018, LONGi has actively participated in the development of Finland's green energy market. Finland plans to achieve carbon neutrality by 2035 and is fully promoting the transformation of its energy structure. With growing demand for clean energy, the Finnish market is placing increased emphasis on integrated solutions that combine solar, wind, and hydropower. The involvement of LONGi supports this development by contributing advanced solar technology to the country's evolving renewable energy landscape.
Associated Press
27-05-2025
- Business
- Associated Press
102MW! LONGi signs supply agreement with Finnish energy company for Hi-MO X10 back contact modules
HELSINKI, May 27, 2025 /PRNewswire/ -- LONGi Solar has entered a strategic partnership with a leading Finnish energy enterprise to supply 102MW of Hi-MO X10 back contact modules. This agreement is a significant milestone for LONGi in expanding its presence in the Nordic market and will contribute to advancing sustainable energy solutions in the region. The collaboration spans sectors including hospitals, schools, shopping centers, and warehouses with the aim of reducing electricity costs for public infrastructure. The project is expected to lower annual carbon dioxide emissions by approximately 105,672 to 163,200 tons, contributing to both economic efficiency and environmental goals. By the end of 2024, Finland had increased its cumulative solar photovoltaic capacity to approximately 1.2 GW, up from 1.0 GW in 2023. Back contact modules are well suited to the Finnish market due to their strong performance in low-light conditions and their structural reliability under high snow loads. Their design also supports off-grid applications and provides a consistent aesthetic that aligns with regional expectations for building integration. Han Ziwei, General Manager of LONGi Nordic, said: " This cooperation marks the first delivery of Hi-MO X10 modules in one of the highest latitude regions, representing a key milestone in the global deployment of back contact technology. The project underscores the potential of the Hi-MO X10 to perform reliably across a range of application scenarios and climatic conditions, supporting the development of a more diversified renewable energy mix in the Nordic region and beyond.' Technology empowerment to assist Finland's green development The Hi-MO X10 solar module uses advanced Back Contact (BC) technology, enabling a mass-produced module efficiency of up to 24.8%. In Finland, where winter conditions and lower solar irradiation pose challenges, high-efficiency modules can help optimize power generation on rooftops and other limited-use areas, contributing to reliable energy supply and long-term cost-effectiveness. Finland's long and cold winters require solar modules with strong low-light performance and high mechanical resilience. The Hi-MO X10 meets these requirements through its back contact architecture and load-bearing design. The module is designed to operate reliably in extreme low temperatures and under long-term snow accumulation. It also reduces hot-spot temperatures in shaded conditions, minimizing the risk of localized overheating and supporting stable, long-term system performance. The module is also outstanding in weak light environments. The advanced back contact technology increases responsiveness in low-light conditions and extends daily power generation hours, contributing to higher overall energy yield. In addition, the design of the Hi-MO X10 aligns with the Nordic architectural style, offering a uniform appearance that integrates well into the built environment while maintaining practical performance standards. Since 2018, LONGi has actively participated in the development of Finland's green energy market. Finland plans to achieve carbon neutrality by 2035 and is fully promoting the transformation of its energy structure. With growing demand for clean energy, the Finnish market is placing increased emphasis on integrated solutions that combine solar, wind, and hydropower. The involvement of LONGi supports this development by contributing advanced solar technology to the country's evolving renewable energy landscape. View original content to download multimedia: SOURCE LONGi Solar
Yahoo
27-05-2025
- Business
- Yahoo
102MW! LONGi signs supply agreement with Finnish energy company for Hi-MO X10 back contact modules
HELSINKI, May 27, 2025 /CNW/ -- LONGi Solar has entered a strategic partnership with a leading Finnish energy enterprise to supply 102MW of Hi-MO X10 back contact modules. This agreement is a significant milestone for LONGi in expanding its presence in the Nordic market and will contribute to advancing sustainable energy solutions in the region. The collaboration spans sectors including hospitals, schools, shopping centers, and warehouses with the aim of reducing electricity costs for public infrastructure. The project is expected to lower annual carbon dioxide emissions by approximately 105,672 to 163,200 tons, contributing to both economic efficiency and environmental goals. By the end of 2024, Finland had increased its cumulative solar photovoltaic capacity to approximately 1.2 GW, up from 1.0 GW in 2023. Back contact modules are well suited to the Finnish market due to their strong performance in low-light conditions and their structural reliability under high snow loads. Their design also supports off-grid applications and provides a consistent aesthetic that aligns with regional expectations for building integration. Han Ziwei, General Manager of LONGi Nordic, said: " This cooperation marks the first delivery of Hi-MO X10 modules in one of the highest latitude regions, representing a key milestone in the global deployment of back contact technology. The project underscores the potential of the Hi-MO X10 to perform reliably across a range of application scenarios and climatic conditions, supporting the development of a more diversified renewable energy mix in the Nordic region and beyond." Technology empowerment to assist Finland's green development The Hi-MO X10 solar module uses advanced Back Contact (BC) technology, enabling a mass-produced module efficiency of up to 24.8%. In Finland, where winter conditions and lower solar irradiation pose challenges, high-efficiency modules can help optimize power generation on rooftops and other limited-use areas, contributing to reliable energy supply and long-term cost-effectiveness. Finland's long and cold winters require solar modules with strong low-light performance and high mechanical resilience. The Hi-MO X10 meets these requirements through its back contact architecture and load-bearing design. The module is designed to operate reliably in extreme low temperatures and under long-term snow accumulation. It also reduces hot-spot temperatures in shaded conditions, minimizing the risk of localized overheating and supporting stable, long-term system performance. The module is also outstanding in weak light environments. The advanced back contact technology increases responsiveness in low-light conditions and extends daily power generation hours, contributing to higher overall energy yield. In addition, the design of the Hi-MO X10 aligns with the Nordic architectural style, offering a uniform appearance that integrates well into the built environment while maintaining practical performance standards. Since 2018, LONGi has actively participated in the development of Finland's green energy market. Finland plans to achieve carbon neutrality by 2035 and is fully promoting the transformation of its energy structure. With growing demand for clean energy, the Finnish market is placing increased emphasis on integrated solutions that combine solar, wind, and hydropower. The involvement of LONGi supports this development by contributing advanced solar technology to the country's evolving renewable energy landscape. View original content to download multimedia: SOURCE LONGi Solar View original content to download multimedia: Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Cision Canada
27-05-2025
- Business
- Cision Canada
102MW! LONGi signs supply agreement with Finnish energy company for Hi-MO X10 back contact modules
, May 27, 2025 /CNW/ -- LONGi Solar has entered a strategic partnership with a leading Finnish energy enterprise to supply 102MW of Hi-MO X10 back contact modules. This agreement is a significant milestone for LONGi in expanding its presence in the Nordic market and will contribute to advancing sustainable energy solutions in the region. The collaboration spans sectors including hospitals, schools, shopping centers, and warehouses with the aim of reducing electricity costs for public infrastructure. The project is expected to lower annual carbon dioxide emissions by approximately 105,672 to 163,200 tons, contributing to both economic efficiency and environmental goals. By the end of 2024, Finland had increased its cumulative solar photovoltaic capacity to approximately 1.2 GW, up from 1.0 GW in 2023. Back contact modules are well suited to the Finnish market due to their strong performance in low-light conditions and their structural reliability under high snow loads. Their design also supports off-grid applications and provides a consistent aesthetic that aligns with regional expectations for building integration. Han Ziwei, General Manager of LONGi Nordic, said: " This cooperation marks the first delivery of Hi-MO X10 modules in one of the highest latitude regions, representing a key milestone in the global deployment of back contact technology. The project underscores the potential of the Hi-MO X10 to perform reliably across a range of application scenarios and climatic conditions, supporting the development of a more diversified renewable energy mix in the Nordic region and beyond." Technology empowerment to assist Finland's green development The Hi-MO X10 solar module uses advanced Back Contact (BC) technology, enabling a mass-produced module efficiency of up to 24.8%. In Finland, where winter conditions and lower solar irradiation pose challenges, high-efficiency modules can help optimize power generation on rooftops and other limited-use areas, contributing to reliable energy supply and long-term cost-effectiveness. Finland's long and cold winters require solar modules with strong low-light performance and high mechanical resilience. The Hi-MO X10 meets these requirements through its back contact architecture and load-bearing design. The module is designed to operate reliably in extreme low temperatures and under long-term snow accumulation. It also reduces hot-spot temperatures in shaded conditions, minimizing the risk of localized overheating and supporting stable, long-term system performance. The module is also outstanding in weak light environments. The advanced back contact technology increases responsiveness in low-light conditions and extends daily power generation hours, contributing to higher overall energy yield. In addition, the design of the Hi-MO X10 aligns with the Nordic architectural style, offering a uniform appearance that integrates well into the built environment while maintaining practical performance standards. Since 2018, LONGi has actively participated in the development of Finland's green energy market. Finland plans to achieve carbon neutrality by 2035 and is fully promoting the transformation of its energy structure. With growing demand for clean energy, the Finnish market is placing increased emphasis on integrated solutions that combine solar, wind, and hydropower. The involvement of LONGi supports this development by contributing advanced solar technology to the country's evolving renewable energy landscape.
Cision Canada
12-05-2025
- Automotive
- Cision Canada
Hi-MO X10 Wins Smarter E AWARD 2025
MUNICH , May 12, 2025 /CNW/ -- LONGi Solar is proud to announce that its Hi-MO X10 back contact module is among the winners of the annual Smarter E AWARD 2025 in the Photovoltaics category. The award was presented in Munich , on the eve of The smarter E Europe exhibition, ahead of Intersolar 2025. LONGi is the only Chinese module manufacturer who win the award. Continue Reading The award ceremony of Hi-MO X10 The Hi-MO X10 was recognized for its contribution to advancing module technology through the integration of LONGi's proprietary second-generation Hybrid Passivated Back Contact (HPBC 2.0) technology that is based on the highly efficient LONGi TaiRay wafer. According to the jury's summary, the module's Anti-shading technology furthermore reduces the loss of power output by 70% and decreases localized temperatures by up to 28%, reducing the risk of hotspots and system fires. The jury further praised the zero-busbar (0BB) structure and the module's Bipolar Hybrid Passivation Technology which brings significant improvements in efficiency, mechanical characteristics and reliability. All in all, the Hi-MO X10 would set new standards for performance and reliability of PV modules. The Hi-MO X10 delivers a maximum power output of up to 670W, outperforms TOPCon modules by as much as 30W, with a module efficiency of 24.8%. The integration of zero busbar (0BB) technology enhances light absorption, improving performance in diffuse light—an advantage in markets with frequent overcast conditions. Designed for long-term reliability, the Hi-MO X10 features just 1% degradation in the first year and a 0.35% annual linear degradation rate. Its improved power temperature coefficient of -0.26%/°C ensures dependable output in both hot and moderate climates. First launched in October 2024 , the Hi-MO X10 has already been widely adopted in European markets. The module represents LONGi's strategic focus on R&D driven back contact innovation to meet performance, aesthetics and application requirements in a changing energy landscape. SOURCE LONGi Solar Xuecui Hu, [email protected]
