Latest news with #display
Washington Post
23-07-2025
- Entertainment
- Washington Post
My wife puts all our family business on social media. Hax readers give advice.
We asked readers to channel their inner Carolyn Hax and answer this question. Some of the best responses are below. Dear Carolyn: My wife is one of those people whose entire life is put on display on social media. Every single thing she experiences or knows about, good or bad, is immediately posted.
Yahoo
22-07-2025
- Business
- Yahoo
Q-Pixel Inc. Launches Its Breakthrough Q-Transfer Technology
Industry breakthrough enabling high-yield (>99.9995%) microLED transfer LOS ANGELES, CA / ACCESS Newswire / July 22, 2025 / MicroLED display startup Q-Pixel Inc. has debuted Q-Transfer, a groundbreaking technology that directly addresses the pixel transfer challenge long faced by the microLED display industry. The low yield of conventional mass transfer processes (<99.99%) leads to prohibitively high repair and manufacturing costs and remains a major barrier for scaling microLED displays towards mass production. As a result, only limited high-end microLED products are currently available on the market. Q-Transfer radically improves microLED transfer yield while maintaining high resolution and superb alignment accuracy, thus enabling the production of large-area high-quality microLED displays, used for wearables, mobile devices, and transparent displays, at affordable prices. Q-Transfer microLED prototype panel Prototype panel demonstration of Q-pixel's proprietary microLED transfer process (Q-Transfer) using 10 μm tunable polychromatic LED (TP-LED) pixels, yielding > 500 PPI displays with zero missing pixels (>99.9995% yield). Q-Pixel has successfully demonstrated color display prototypes by implementing their patented Q-Transfer process using Q-Pixel's tunable polychromatic microLEDs (TP-microLEDs). These displays consist of 10 μm pixels at over 500 pixel per inch (PPI) densities, and most notably, zero missing pixels in the transfer process for > 99.9995% transfer yield - more than an order of magnitude improvement over existing transfer approaches. "Q-Pixel's patented Q-Transfer process revolutionizes microLED manufacturing, providing a simple, cost-effective approach for the display industry to achieve future generations of displays," remarked Nick Kepler, COO of semiconductor incubator Silicon Catalyst. "Very simply, Q-Transfer unlocks the potential of microLEDs to break into display markets beyond just the AR/VR market, enabling a launch into the wider market of smartwatches, smartphones and other large-area devices." "Q-Pixel has made astounding progress since joining the Silicon Catalyst Ventures portfolio," stated Dr. Shih-Wei Sun, Founding Managing Director of Silicon Catalyst Venture Fund, and former CEO of United Microelectronics Corporation (UMC). "Q-Pixel continues to push the known boundaries of display technology with their impressive results, and we strongly support Q-Pixel's vision of delivering next generation display products." "The debut of our Q-Transfer display technology marks a new milestone in Q-Pixel's microLED display technology portfolio. Q-Pixel's technical achievements include world records for highest resolution color active-matrix display (6800 PPI), highest resolution full-color display (10000 PPI), and world's smallest full-color pixel (1 μm) diameter," stated Dr. J. C. Chen, CEO and co-founder. "Q-Transfer unlocks a key step that brings us closer to a bright future of microLED displays."
CNET
22-07-2025
- CNET
How to Dim Your iPhone Display Beyond the Minimum Brightness Level
No matter how low your iPhone display can go, sometimes it can still shine like a spotlight despite being at its dimmest setting. Whether you're doing some last-minute scrolling before bed with a sleeping partner or you have a headache that's making you more sensitive to light, the dimmest your iPhone can go isn't always dim enough. The current generation of iPhone displays can go all the way down to a single nit of brightness, but if that feels too bright, you're not without options. There are a series of small tweaks that can reduce the minimum brightness of your display even further if you know where to look and what to change. Here's how to reduce the brightness of your iPhone's display with some common and not-so-common methods. For more, don't miss when you can expect the iOS 26 public beta to release. iPhone Pro Tip This tempered glass screen protector, designed for the iPhone 14 and older models, protects your display from cracks, scratches and dust. And the screen protector is coated with a special filter that allows light to pass through only from certain angles, to protect your privacy. Details Get privacy and protection with this iPhone screen protector $8 at Amazon 1. First, enable Night Shift The iPhone Night Shift setting automatically adjusts your display -- using your phone's internal clock and geolocation -- to warmer colors that are easier on your eyes as the day progresses to night. Every morning, the display returns to its regular settings. You can turn it on in your Settings or via the Control Center. While it may not be as effective as we once believed it was in suppressing melatonin, Night Shift still provides benefits by lowering the blue light on the display, and that's definitely a good thing. Method 1: Settings Go to Settings > Display & Brightness > Night Shift. From here, you can either schedule the feature at a certain time or enable it for the entire day and have it disabled in the morning. You can also adjust the color temperature by using the slider at the bottom of the page -- you can choose between less warm and more warm. Method 2: Control Center Swipe down from the top-right to access the Control Center. Then press and hold the Brightness icon and tap the Night Shift button to turn it on and off. You can access Night Shift from your settings or the Control Center. Screenshots by Nelson Aguilar/CNET 2. Use this accessibility feature to reduce the display's white point You can also reduce the white point on your iPhone to adjust how intensely colors appear on your screen. Bright colors are especially illuminated at night time, so try this setting to dull them a bit. In Settings, go to Accessibility > Display & Text Size and toggle on Reduce White Point. A marker will appear under the setting, which you can use to adjust the intensity of bright colors to your liking. This adjusts the intensity of bright colors on your display. Screenshots by Nelson Aguilar/CNET 3. Add a low-light filter with the Zoom accessibility feature If you're only interested in dropping the brightness and don't want warmer or less intense colors, you can lower just the display brightness. Using the Zoom accessibility feature, you can add a low light filter over your display to make it darker than usual. Launch the Settings application, go to Accessibility > Zoom, and make sure that the Low Light option is chosen under Zoom Filter. You can toggle the Zoom feature here, but the easier way is to triple-click the side button from anywhere on your phone to use Zoom. When Zoom is enabled, your phone will automatically add the low light filter to your display, making it darker, even if your brightness is already at its lowest. A small floating circle will appear on your screen, indicating that Zoom is currently turned on. If you tap the controller, you can hide it. To disable Zoom, simply triple-click on the side button again. The easiest way to enable the low light filter is to quickly triple-click the side button. Screenshots by Nelson Aguilar/CNET Need more? Don't miss all of the iOS 26 features that we're excited about that aren't Liquid Glass.
Phone Arena
18-07-2025
- Business
- Phone Arena
Apple pressures Samsung and LG to help it combat tariffs by reducing their profits
*Image credit — Bloomberg Apple is reportedly ( translated source ) pressuring display suppliers Samsung and LG to lower their prices so that the iPhone 17 isn't impacted too heavily by U.S. tariffs. The new iPhone lineup will likely see price increases, but the company is determined to lower the sticker shock as much as it can before Display is apparently trying to negotiate with Apple about the latter's demands. LG Display, on the other hand, has accepted the new terms as its revenue was too dependent on this year's orders for the iPhone 17 . To further complicate matters, Apple had to exclude Chinese display manufacturer BOE from this year's supply. The iPhone 17 series is seeing a long-awaited upgrade, with even the base model finally featuring a 120 Hz LTPO display: what Apple calls a 'ProMotion' display. BOE was apparently unable to meet the company's standards, though it has secured some orders for the Chinese stock very recently. President Trump has specifically targeted the iPhone with tariffs if Apple continues to manufacture its phones abroad and imports them Stateside. The tariff policies affect a lot of products, but the president has repeatedly named the iPhone personally, insisting that its production be shifted to the U.S. iPhone 16e uses displays provided by BOE. | Video credit — Apple This pressure from the president has been tough on CEO Tim Cook, but the company has deemed the tariffs to be more acceptable than shifting production to the U.S. That hasn't stopped Apple from trying to reduce manufacturing costs wherever it can, however. The iPhone 17 series, with its upgrade to 12 GB of RAM for Apple Intelligence and the aforementioned 120 Hz displays, will almost certainly be more expensive. This price is only going to keep going up as Apple shifts to 2 nm chipsets next year with the A20 processors. Samsung — Apple's largest smartphone rival in the States — also manufactures its phones outside the U.S. However, it hasn't been the direct target of Trump's insistence for smartphones made in America, and is quietly coasting Display, in my opinion, will likely succumb to Apple's demands this year, or at least reach a compromise. How that affects the final retail price of the iPhone 17 models is still unclear, though an increase is almost guaranteed.
GSM Arena
18-07-2025
- GSM Arena
Kuo: Galaxy Z Fold8 to introduce crease-free display before Apple Comments
I Great, crease is out. Only took 8 generations. Maybe by the the 16th iteration, the screen won't face catastrophic damagefrom a finger nail,scratches at a level 2! ? breaking news, companies using the same display, and the same outsourced parts manufacturer, are going to introduce a technology at the same time......... T kdss, 4 hours ago There is reason in your words. But I have a different opinion. First, I think that Samsung w... more I think you put too much stock in Samsung trying to beat Apple, especially since Apple tends to almost never do anything first, instead they refine other people's breakthroughs and make them easier for Apple's buyers to use. Samsung being first also wouldn't appeal to Apple buyers anymore than Apple doing something first appeals to most Android or Linux users. Doing something exclusively like flip/fold might, and even then it's an uphill battle. In general who puts much stock in such claims as their motivation for buying? Very small number/segment of consumer innovators, hardly the segment from which you expect large sales figures, let alone large migrations from sticky Apple users. As for battery, as I mentioned before, they're not then one to do that, It's also not a requirement to succeed in my scenario, as large volume sale is not the goal, but it is in yours, which alone tells me their motivation wasn't the same. Most importantly if Samsung was looking for wide & wild success in the Edge, then why wan't there a marketing campaign even closs to match? There was no fanfare about it, heck I've seen more ads, fanfare & news segments about each of the refreshed foldables than there was about this supposed 'we're yelling from the rooftops we did it first' product Edge. Look at last year's Samsung ring marketing, that's more what to expect at least if the Edge were intended to be a wide success IMO. It's like even to Samsung's marketing team it barely existed either. Of course we both could be wrong. 🤷🏻♂️ Maybe in a coupla years an insider will spill the beans, it'll be a story that gets no press and of interest to a handful of people, that's usually how we find out the truth of these things. PS, you mention in your reply to Anon about big companies and risk/security, the Edge product IS a risk, not making it is the safer thing to do, just keep making S25 with spec changes, the Edge is more of a risk. There's risk and then there's risk, and the battery thing y'all focus on is not the same risk as a new product, as mentioned/explained before. And contrary to the statement, Apple isn't the bigger fish, they're equal and that's despite, as you acknowledge, Apple spending more on marketing than pretty much all other mfrs combined, The difference being that Apple sales also benefit Samsung immensely, some years when the profit from display sales to Apple outweighed the profits of their own mobile segment. C Well crease or not as long as main screen will not feature GG victus or better foldables are no for me. k Anonymous, 3 hours ago I mean, they've been the biggest smartphone maker in the world for nearly 20 years. I thi... more I'm not saying they won't be good. I'm more than sure of that. Samsung is not just about smartphones. But the stupid things that the biggest companies can do when they are driven by security in their users are really big. I'm just trying to show them. And Edge shows exactly that. And there are always bigger fish in the ocean than you. In the case of Samsung phones - Apple. That's what I'm saying. And not because Apple phones are better. Apple is just on a different level in terms of marketing compared to everyone else combined. ? kdss, 4 hours ago There is reason in your words. But I have a different opinion. First, I think that Samsung w... more I mean, they've been the biggest smartphone maker in the world for nearly 20 years. I think, they'll be just fine despite your strange alarmism. k Tazman, 6 hours ago Well there is a market for it, even if it isn't yours or mine, so that alone justifies it... more There is reason in your words. But I have a different opinion. First, I think that Samsung was too sure that they would achieve unprecedented success, whatever device they released on the market. Well, it didn't work out exactly like that, since they even had to reduce the production of Edge, since demand did not meet their expectations. Second, they thought that by being first, they would be able to steal customers from Apple with this product. Well, it didn't happen. This will not happen in general, no matter what alien product they release on the market. Apple fans are so consolidated that even if they gave them an Edge as a gift, 99 percent of them would not even turn it on to look at it. Some call this a cult, for me it is more like stupidity. Third, they definitely wanted to be first before Apple. And that's why we got an unfinished product. And no matter how diehard Samsung fans are, they still have more sense than Apple's and wouldn't blindly buy something that costs as much as the Ultra, but in terms of specifications it's below the pure S25. Fourth, even with all its shortcomings it could have attracted a lot more customers if they had simply put a bigger battery in it, which is probably the most important requirement for people who are looking for a thin and light phone anyway. It's definitely clear to everyone that a thin phone can only offer a big screen and a big battery. Well, Edge offered only 50 percent of TWO, which is ONE. And the fact that they're stopping the S+ variant because of EDGE shows how confident they are in their sales. And even from the moon everyone can see that if they had simply put at least 1 top camera on the S25+ and even on the S25, they would have broken the market with sales. But to me, they purposely keep these models so limited so that everyone can pay a little more and buy an Ultra. Y Why not have two motors on each side of the device that will roll outwards in order to stretch the panel & straighten out the crease? (motors will have to roll every time you unfold/fold) It's similar to the rolling LG TVs, except you have two motors rolling in opposite directions. S Typical Scamsung. Always waiting for Apple to become a threat for them to finally do what fans have been asking for years. ? Anyone using current gen of foldables can tell you, crease is no longer an issue. Price is. They should release foldables for lower tier chipsets with reduced prices. Like Sn 8 Gen 1 or Snapdragon 7 $1k Fold FE. T kdss, 7 hours ago I was joking a little with the previous comment. Honestly, I've never cared about who di... more Well there is a market for it, even if it isn't yours or mine, so that alone justifies it's release. However I think I can explain a reason for the Edge to you (other than truly some people just want the thinnest phone possible [ like they might want a Zoolander smallest phone possible]). It mirrors Apple's own reasoning for an iPhine Air in a similar time frame just before their Fold launch... They are both large scale R&D feedback projects, leading ups to other designs... like the thinner foldables and portless phones. The later being the lesser current focus, but offers learnings for that application too. While you can test design prototypes in the company even with a wide alpha distribution of internal devices, nothing beats a product in the wild for testing in ways you couldn't guess/imagine, and it requires that you figure out the production/mfr challenges a concept/prototype device doesn't. Making these small volume niches devices that push the boundaries help them figure out the limits of their mfr process for things like stacking PCBs/components/connectors, etc to fit into the thinner space under a more ideal situation that better isolates the mis-steps and areas that need to be worked on than putting it into a cramped foldable. It also means that you don't risk the development/production of your successful product, and can instead have an offshoot codename project that if it fails can simply be delayed or never see the light of day, admittedly at a greater cost than just a prototype. If they weren't fully satisfied with their results in the production phase, you either wouldn't have seen it come out at all, or it would've been spun-off into a separate quietly released niche product (like the Fold6SE) for a limited market that gets less mainstream press, as a 'were getting close' product that we're not ready to have people focus on, but we do want people to use/test for us. That we got a full product launch means they were successful through most/all of their milestones and they felt it was worthy. IMO, that it launched quietly and before Unpacked with less fanfare to me means that it was less about screaming " we're thinnest first " (especially as seen by the Fold vs Honor debate that title is contested and last a weekend depending on definition), and more about 'we have a product that we can learn from that we think enough people might buy to make it worthwhile'. Then they can improve on that form factors in the areas that customers say is lacking with the next model That's my take on it, finance & improve you R&D with a production model that can be applied to other models. J What I truly want Samsung to do is what LG have done before: making some dual-screen case for their S Series models D Once again, Samsung proves they don't give a damn about their customers. They only lift a finger when the competition kicks them in the teeth! k Akarius, 7 hours ago But you see, when I used the old Z Fold 4 and its hinge, I could not feel any looseness, the w... more Of course, you will feel everything smoothly. It's just that the human body is not designed to notice/feel something as weak as the forces that act on the folding of the screen. Even more so, a difference in forces. But that doesn't mean they don't exist. Sometimes even a difference of 1 micron can lead to an imbalance in the system. You won't feel it, but at a micro level it is there. And that's why after a while you will see the final result on the screen as a crease. Anonymous, 10 hours ago Maybe try improving the screen? You can still ruin it with a fingernail 7 years in Well, a glass screen still gets scratched by anything too so go an complain about that aswell. k Tazman, 7 hours ago The only way I could see that happening, is a scenario similar to the Vision Pro using Sony�... more I was joking a little with the previous comment. Honestly, I've never cared about who did something first in the world of phones. I care about who did it better. That's why I'll never understand why Samsung, for example, released Edge so hastily, which is simply a thin compromise of a phone. Just to say that they were before Apple, or anyone else. A kdss, 8 hours ago Because the more precise the drilling, the more precisely the hinges will fit. Better position... more But you see, when I used the old Z Fold 4 and its hinge, I could not feel any looseness, the whole mechanism was tight, precise and you could feel when operating it that it absolutely gives no way in any axis. So just where does this precision that they speak of come into play? What does it do differently than the already existing mechanisms of all the other manufacturers? Don't get me wrong, I have a pretty good mechanical imagination and can work out the forces working among components. All I'm saying is their press releases is full of very vague phrases that explain absolutely nothing with the highest amount of words possible. T kdss, 9 hours ago If they really release a foldable phone where you can't see where the screen bends, then ... more The only way I could see that happening, is a scenario similar to the Vision Pro using Sony's micro OLED displays for their Vr headset and Sony doesn't for their own. Where the cost of production requires a considerable increase in price, so much so that Apple think their fanba... customerbase would pay a factorial premium for the privilege whereas Samsung does not. Although knowing Samsung it would likely still do something like the very limited run Fold6SE just to get a 'first product' title even if it only shipped a handful. As the cost difference is supposedly only about $10/~40% ($25 v $35) of a much larger BOE, it's not as much of a barrier as Sony's OLEDs. That K-Tec is supposedly building a separate factory in Vietnam to meet the Trumpian Tariff concerns means that regardless production would lag their other facility, so it's almost assured Apple will be at least 2nd to market with the new hinge if not further down the launch list/order.
