logo
G train gets state-of-art, open gangway train — 3 more coming down the line

G train gets state-of-art, open gangway train — 3 more coming down the line

Yahoo04-03-2025
The first of four state-of-the-art subway trains went into service on the G train Tuesday, a substantial upgrade for the cross-borough line connecting Brooklyn and Queens.
The train — which was taken out of service on the C line in order to be deployed on the G line — is one of the few in the system to have a so-called 'open gangway' design, in which all five cars are connected via an articulated section and passengers can move freely between them.
The design, known internally as the 'R211T,' was first tested on the C line last year.
NYC Transit President Demetrius Crichlow said Tuesday that the design was particularly suited to the G train, where shorter trains stop in the middle of long platforms.
'Everyone that's taken the G train knows the experience of hustling down the platform to make that train,' Crichlow said. 'You get to the last car of the train, and then the train is just a little bit crowded in that one last car.
'No more,' he said. 'Open gangways are open from end to end.'
Tuesday also marks the first time that an open gangway car was put into passenger service along a line with a significant elevated portion. Proponents of the design say open gangway cars could reduce incidents of subway surfing by eliminating easy access to the train's exterior.
A second five-car R211T train is scheduled to begin running on the G line on Wednesday, and another two are due in service by June — all taken from the two 10-car trains that have up until now been running on the C line.
Together, the four five-car trains will account for nearly a third of the 13 trains that typically wear the green 'G' bullet.
But while a third of the G train fleet is set to soon be modernized, the remaining nine will continue to be some of the oldest in operation.
Crichlow said Tuesday that the MTA is still trying to locate a mysterious track defect that's been wearing out the wheels on R160 train cars running on the E, F and R lines.
As first reported by the Daily News, the MTA moved all the modern R160 cars off of the G line in January to backstop the E, F and R lines — which use a computerized signaling system — while those trains' wheels were being repaired.
Since the G line is expected to continue using its older signaling system for at least another two years, the MTA has been running older R46 and R68 train sets to free up R160s for the E, F and R lines.
In January, transit officials said the measure was temporary, and that the R160 cars would be back on the G by the end of March. Crichlow said Tuesday that that was unlikely.
'The plan at this point is just to introduce the two R211 open gangway [trains] and then within the next two months you'll have an additional two trains,' he said. 'Then the goal is, over the next capital program, the [new] R211s that we will be getting, a portion of them will come to the G line.'
Sources familiar with the hunt to find the track defect confirmed to The News Tuesday that the efforts were ongoing, but the source of the wheel wear has yet to be found.
The decision to send all 20 of the MTA's open gangway cars to the G train means they will no longer be operating on the C line, at least until more arrive. The transit agency announced last year that it had ordered 80 additional R211Ts as part of a 435-car purchase option from train-builder Kawasaki.
Traditional 'closed gangway' R211A cars currently make up the bulk of service on the A and C lines.
Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Alstom to deliver propulsion components for MTA's new subway cars
Alstom to deliver propulsion components for MTA's new subway cars

Yahoo

time24-07-2025

  • Yahoo

Alstom to deliver propulsion components for MTA's new subway cars

Alstom is set to supply propulsion components for an additional 435 new generation subway cars, designated as the R211 series, for the Metropolitan Transportation Authority (MTA) New York City Transit (NYCT). This announcement follows the exercise of the second option with Kawasaki Rail Car. As a result, over 80% of the NYCT's fleet will be installed with Alstom's propulsion systems. The R211 series cars are part of NYCT's initiative to enhance service reliability and modernise services for its customers. The propulsion systems for the R211 subway cars will be produced at Alstom's manufacturing facility located in Hornell, New York. This site is claimed to be the largest passenger rail manufacturing plant in the US. The Hornell facility is equipped to manufacture AC traction motors, traction cases, and high-speed circuit breakers (HSCB). It also features a combined test and power laboratory, which allows for comprehensive testing and validation of components on-site, thereby improving quality control and production efficiency. Alstom Americas president Michael Keroulle said: 'Alstom is thrilled to build on our proven track record of delivering cutting-edge components that enhance the reliability and efficiency of urban transit systems. 'With the exercise of this second option, more than 80% of the New York City Transit fleet will be equipped with Alstom's propulsion system, helping trains keep millions of passengers moving to their destinations.' Alstom maintains a diverse portfolio of components, providing solutions for original equipment manufacturers, operators, and asset owners. The company's offerings include advanced systems and products such as bogies, motors, dampers, brake friction, switchgear, propulsion and auxiliary converters, transformers, and green traction solutions, as well as train control and information systems. Recently, Alstom delivered the first of 22 six-car trains for São Paulo's Line 6-Orange, produced at its Taubaté facility in Brazil. Each train can accommodate up to 2,044 passengers and achieve speeds of 90 km/h. "Alstom to deliver propulsion components for MTA's new subway cars" was originally created and published by Railway Technology, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data

Hornell Alstom plant will manufacture 435 more propulsion systems for Kawasaki R211 cars
Hornell Alstom plant will manufacture 435 more propulsion systems for Kawasaki R211 cars

Yahoo

time23-07-2025

  • Yahoo

Hornell Alstom plant will manufacture 435 more propulsion systems for Kawasaki R211 cars

Over 400 more propulsion systems for R211 subway cars will be manufactured by Alstom in Hornell. The company announced July 22 that it has exercised the second option with Kawasaki Rail Car Inc. to supply propulsion components for an additional 435 new generation subway cars. The R211 series is being built for the Metropolitan Transportation Authority's New York City Transit system. The MTA has ordered a total of 1,610 R211 cars. 'Alstom is thrilled to build on our proven track record of delivering cutting-edge components that enhance the reliability and efficiency of urban transit systems,' said Michael Keroullé, President of Alstom Americas. 'With the exercise of this second option, more than 80% of the New York City Transit fleet will be equipped with Alstom's propulsion system, helping trains keep millions of passengers moving to their destinations.' Alstom's Hornell operation, which spans several different campuses, is now the largest passenger rail manufacturing site in the United States. The component plant in Hornell produces AC traction motors, traction cases and high-speed circuit breakers. It also features a combined test/power laboratory that ensures all components are rigorously tested and validated on-site, an integrated approach that enhances quality control and streamlines production, the company said. More: How new Plant 4 is impacting Hornell workforce, Alstom's pursuit of rail contracts While the R211 cars are manufactured by Kawasaki, MTA recently ordered 316 M-9A passenger railcars from Alstom, with an option for 242 more. The car body shells will be manufactured at Alstom's new Plant 4 in Hornell. The new car body shell manufacturing facility is also gearing up to handle an order from Metra, which serves Chicago and neighboring suburbs. This article originally appeared on The Evening Tribune: Alstom picks up Kawasaki option to build R211 propulsion in Hornell Solve the daily Crossword

Alstom wins $2.3bn contract from LIRR and Metro-North Railroad
Alstom wins $2.3bn contract from LIRR and Metro-North Railroad

Yahoo

time08-07-2025

  • Yahoo

Alstom wins $2.3bn contract from LIRR and Metro-North Railroad

Alstom has secured a contract valued at $2.3bn to supply 316 commuter rail cars to the Long Island Rail Road (LIRR) and Metro-North Railroad, divisions of the New York Metropolitan Transportation Authority (MTA). The order also includes an option for up to 242 additional cars, potentially increasing the contract's value by up to $1.5bn. Under the contract, Alstom will supply its M-9A passenger vehicles, which are designed to replace the four-decade-old M-3 cars. The vehicles will be electric multiple units (EMUs) and operate independently on electrified tracks without the need for a separate locomotive. Approximately half of the rail cars will serve LIRR, the nation's busiest commuter railroad, with the remainder allocated to Metro-North, which caters to the northern New York and Connecticut suburbs. The new trains will adhere to the MTA's stringent cybersecurity standards, ensuring the protection of internal systems and external communications. This order will bring Alstom's total production for the MTA to around 5,400 commuter and subway cars. Alstom Americas president Michael Keroullé said: 'With the M-9A project, Alstom looks forward to delivering great commuter trains and good jobs for New Yorkers. We are grateful to the MTA for putting their trust in us and building on the long history that Alstom has with the MTA and with manufacturing state-of-the-art trains in America. 'These new trains not only provide passengers with greater comfort, convenience, and amenities; they will also be made in our New York factories, by New York labour. The investment the MTA makes in these train cars is an investment in local communities throughout the Empire State.' The M-9A passenger vehicles are part of Alstom's Adessia commuter rail portfolio, known for its sustainability and adaptability to various urban and suburban environments. These modern cars promise a quieter, smoother, and more reliable experience for commuters. They will be equipped with amenities such as USB charging ports, wheelchair spaces, accessible restrooms, along with extra-wide doors to expedite boarding and alighting. The trains can operate at speeds between 120-200km/h on both electrified and non-electrified networks. The contract is set to generate nearly 300 jobs at Alstom's production facilities in New York. The car body shells will be manufactured at Alstom's Plant 4 in Hornell, while the bogies will be assembled in Plattsburgh. Alstom's site in West Mifflin will produce the propulsion systems. In a related development, Alstom has secured a $1.9bn order from SNCF Voyageurs for 96 RER NG trainsets for the RER D line, a project fully financed by Île-de-France Mobilités and approved on 10 April 2025. "Alstom wins $2.3bn contract from LIRR and Metro-North Railroad" was originally created and published by Railway Technology, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store