
This Simple Energy Hack Might Be the Easiest $100 You Ever Save
It turns out many of your home's electronics are quietly draining power -- even when they're turned off. These so-called "energy vampires" include TVs, printers, gaming consoles, coffee makers and even electric toothbrushes. And while each one might only use a little, together they can seriously drive up your bill. If you're ready to fight back against energy waste this summer, here's how to spot the worst offenders, and how to stop them from draining your wallet.
To minimize the impact of energy vampires on your energy bills, experts recommend unplugging these devices when they're not being used. It may seem like a small step, but according to the US Department of Energy, this simple habit can save the average household up to $100 annually.
Below, we'll answer how much money unplugging home appliances can actually save you and whether the energy savings are worth unplugging and replugging appliances each day. Plus, to maximize your energy savings, we have tips on how to lower your water bill, the best temperature to set your thermostat at to save money and the energy-efficient way to do laundry to cut utility costs.
Can unplugging appliances actually save me money?
It might seem counterintuitive to unplug your appliances. After all, they're off, so why would they be sucking up energy?
The fact is, household appliances actually still use energy even when they are turned off but still plugged in, according to Energy.gov. Whether the device is switched off or in standby mode, some of the worst offenders are:
A device that may still use energy in the form of lights or other displays showing the device is off.
Desktop computers that were put into sleep mode instead of being powered off.
Chargers that still draw power even if the device is not connected.
Media players that continually draw power, especially ones that still might scan for updates in the background.
Phones with displays that show when not in active use, like cordless phones.
New smart home appliances like refrigerators, washers and dryers that have always-on displays, internet connectivity and electronic controls.
Watch this: Easy Ways to Lower Your Utility Bills and Save Money
08:13
Reduce your standby power to save electricity and money
Many people are shocked to realize how much standby power can add up. Standby power accounts for 5% to 10% of residential energy use, according to the Department of Energy.
How much you save could depend on how many devices you use -- and your habits with them. For instance, an educational experiment from Colorado State University found that a combo radio/CD player/tape player used 4 watts continually, whether it was in use or not. Unplugging it when not in use would save 100 times as much power during the lifetime of the device.
A study published by the Natural Resources Defense Council (PDF) found that reducing the load from always-on devices would save consumers a total of $8 billion annually and avoid using 64 billion kilowatt-hours of electricity per year. It also has environmental benefits, like preventing 44 million metric tons of carbon dioxide pollution. The NRDC estimated the cost of always-on devices at up to $165 per household per year on average.
Pro savings tip!
Buying a smart plug can help you conserve energy by controlling the power on virtually any device you plug in. This plug from Leviton is CNET's top pick.
Details
$29 at Amazon
How can I optimize my standby power?
The first step is, of course, to unplug anything that is not actively in use or not used often. Examples of devices that could easily be unplugged include TVs and set-top boxes in guest rooms. It's also generally easy to unplug media players when not in use, like a radio or CD player. When you take your device off its charger, it can help you get into the habit of unplugging that charger as well. You might also be surprised how many devices we have plugged in that we don't even use anymore. Examples could include old wireless phones, old media players or lamps that are more decorative than functional.
Unplugging and replugging in everything can get tedious, especially if your outlets are in hard-to-reach places. If the outlet is inaccessible, it will be hard to keep up.
Instead, you can also set up ways to make the process of cutting phantom load more automatic. You can plug devices into surge protectors. That way, one flick of a power switch button can turn off multiple devices. You can also get timers to plug devices into or smart plugs so that you can automate when the power is connected to a device. For instance, you might set the time for the TV's power so it is only connected during peak use times like evenings or weekends.
Investing in a smart thermostat that can keep your room comfortable, while optimizing for power consumption is a good investment for long-term savings. Similarly, installing LED light bulbs is an excellent investment that uses far less energy compared to incandescent lightbulbs. While the initial outlay might seem high, the savings add up over the years.
You can also look into getting Energy Star products. Many of these products are rated to have lower standby power use than products that are not rated by Energy Star.
Find additional resources for saving electricity
As power bills get higher and more erratic over time, it's more vital than ever to find ways to save on electric costs. For instance, in addition to unplugging the devices in the home, you can take a look at our guide about turning off lights when not in use. Another key way to affect your electric/heating bill for the better is to know the ideal temperature you should set for your home. You can also review our guide on quick tips for saving on your gas and electric bill, like turning down your water heater or changing your air filters.
More money-saving tips
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


CBS News
9 minutes ago
- CBS News
Kids 4 Kids bake stand in Glen Mills, Pennsylvania, raises funds for Ronald McDonald House
At the corner of Ponds View Drive and Willits Way, a group of children is spending part of their summer not at the pool, but behind a table filled with cupcakes, cookies and cake pops for a good cause. The annual bake stand, called Kids 4 Kids, is the brainchild of Glen Mills mom Brianne Krysiak, who started the fundraiser in 2018 in memory of her son, Gordon, who was stillborn at 19 weeks. This August, Gordie would have turned 10. "It's a great excuse to help others and just see something positive out of something that was tragic," Brianne said. The event runs for three days every August. Children from the neighborhood, including Krysiak's five kids, take part in the effort, selling baked goods to drivers and passersby from 11 a.m. to noon. All proceeds go to the Ronald McDonald House of Greater Delaware, which provides free lodging and support to families with children undergoing medical treatment far from home. "Ronald McDonald House is just incredible," Brianne said. "Anything to help alleviate the stress for traveling parents is huge." Brianne's 11-year-old son Bennett, who was just a toddler when Gordie died, helps lead the stand each year. "We just bake and get stuff ready so we can donate it to the Ronald McDonald House," Bennett said. "[Gordon] passed away. It was brutal because I was like 3 or 4. I was, like, really sad." This year, kids and neighbors are hoping to top last summer's total of $3,000 raised. "This year I made cupcakes for the bake sale and it's always a great turnout," 17-year-old Addison Neff from Glen Mills said. All the baked goods are either homemade or donated by local bakeries. The impact of the fundraiser goes far beyond the neighborhood. "We think it's pretty cool that we have kids that are raising money to help other children," Pam Cornforth, president and CEO of Ronald McDonald House Charities of Greater Delaware, said. "We love that." Even local officials stop by to show their support for the stand. "I think it's great," James Callahan, director of zoning for Concord Township, said. "I think the kids should be out. Every time I see them, I try to support them." The stand is open through Friday. On Saturday morning, the kids will hand-deliver the donation to Ronald McDonald House, a tradition that brings neighbors together year after year. "It's very heartwarming," Brianne said. "Some years, you're just blown away by how many people show up. It's special."


CNN
39 minutes ago
- CNN
Part of Delta Air Lines 737's wing breaks off during flight
The Federal Aviation Administration is investigating after a flap on a Boeing 737's wing partially broke off before landing in Texas on Tuesday. Delta Air Lines Flight 1893 was flying from Orlando International to Austin-Bergstrom International Airport when passengers noticed something had partially broken away from the back of the wing. 'We felt it was bad turbulence. The plane was shaking,' passenger Shanila Arif told CNN. 'The lady in front of us opened the window and told us it is broken. I opened the window and got scared.' Video recorded by Arif showed the flap dangling behind the wing, as the plane flew at hundreds of miles an hour thousands of feet in the air. She worried if the piece completely broke off it could hit the tail of the aircraft and cause a crash. After landing 'it was observed that a portion of the left wing's flap was not in place,' Delta Air Lines said in a statement. 'The aircraft has been taken out of service for maintenance.' Flaps are surfaces on the back of the wing designed to be extended for takeoff and landing. 'We apologize to our customers for their experience as nothing is more important than the safety of our people and customers,' the airline said. There were 62 passengers and six crew members onboard the plane. No one was injured. Delta pledged to fully cooperate with the FAA investigation.
Yahoo
an hour ago
- Yahoo
New video shows scary moment JetBlue flight slid off runway at Logan Airport
Officials released new video of a scary scene at Logan Airport in June when a JetBlue flight skidded off the runway. On June 12, JetBlue flight 312 coming from Chicago rolled into a grassy area off runway 330L as it came in for landing. Video shows smoke coming from the wheels of the Airbus A220 as it swerves left. Massport says there were no reports of any injuries. The skid caused an hourslong ground delay as passengers on the plane were bussed off the runway. The FAA and JetBlue are both investigating what happened. Download the FREE Boston 25 News app for breaking news alerts. Follow Boston 25 News on Facebook and Twitter. | Watch Boston 25 News NOW Solve the daily Crossword