National Capital Commission and Ottawa Senators sign agreement on purchase of land at LeBreton Flats
The NCC says the agreement with Capital Sports Development Inc. is a key step in bringing a major events centre and arena district, including mixed-use development, to the area.
'With the agreement of purchase and sale finalized, both parties can proceed with next steps in the project,' the NCC and the Senators said Monday in a joint statement. 'These include zoning, design and approvals, as well as decontamination of the land parcels to prepare for construction.'
Distance to LeBreton Flats from Parliament Hill
The new arena at LeBreton Flats would be situated much closer to downtown Ottawa. Canadian Tire Centre is 27.1 km from Parliament Hill whereas LeBreton Flats is only 2.1 km away.
The Senators and the NCC initially reached a memorandum of understanding in June 2022 to develop a new event centre along Albert Street, between Preston Street and City Centre Avenue. Michael Andlauer and his group purchased the Senators in September 2023, and the NCC extended the memorandum of understanding to September 2024 to allow for negotiations with the new ownership group.
The NCC and the group representing the Ottawa Senators announced an agreement in principle last September regarding the sale of land at LeBreton Flats, with the ultimate goal of bringing an NHL arena to the site, along with other development. The two sides have been in negotiations for nearly a year.
'The promise of a major events centre will provide a lively and convenient attraction for residents and visitors, inject new energy and excitement into the core of the Nation's Capital and further catalyze the development of LeBreton Flats,' said NCC CEO Tobi Nussbaum in a news release. 'This agreement builds on the two previous real estate transactions completed by the NCC since 2022 on the Building LeBreton project that will see over 2000 new housing units along with new retail and commercial spaces built on the site.'
Senators rink
A rendering of what a new Ottawa Senators arena on LeBreton Flats could look like. (Capital Sports Development Inc.)
No details about the agreement have been disclosed.
'We are pleased to reach an agreement of purchase and sale with the NCC to take the next step in this process,' said Ottawa Senators President and CEO Cyril Leeder in a news release. 'There are still many more hurdles to clear and we look forward to working with the NCC and other stakeholders to achieve our shared vision of creating an event centre at LeBreton Flats that can be enjoyed by our Ottawa-Gatineau community.'
Leeder said earlier this year that fans could start to see progress at LeBreton Flats over the next few years, but could still be several years before the Senators drop the puck for the first game at a new arena.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CTV News
16 minutes ago
- CTV News
B.C. man claims adult toy caused ‘injury to genitalia,' sues Amazon seller
The Amazon logo is seen during a product unveiling in New York on Feb. 26, 2025. (Michael Nagle/Bloomberg) A B.C. man has filed a lawsuit against an Amazon Canada seller after allegedly suffering a sensitive injury using an adult toy purchased on the website. The Vancouver resident bought the product from seller Joyfull-CA, but received no instructions on how to operate the device, according to his claim, which was filed in B.C. Supreme Court last week. The court documents allege he was injured while trying to use the toy 'for its intended purpose' in September 2023. 'After a short period of time the suction feature suddenly intensified,' the lawsuit reads. 'The plaintiff tried to turn the device off, but the suction only became stronger. The suction was too strong for the plaintiff to remove his genitalia from the device.' As a result, he suffered an 'injury to genitalia,' skin irritation, and a hernia, according to the claim. Amazon Canada is also named as a defendant in the lawsuit, which accuses both the e-commerce giant and Joyfull-CA of failing to warn about the risks associated with using the adult toy. The defendants also owed the purchaser a duty to instruct him on 'how to properly use the device, including how to turn it on or off, how to increase or decrease the suction feature, and what to do if the device was not working as expected,' the claim reads. 'At no time did Amazon or Joyfull provide this warning or instruction,' the lawsuit adds. None of the allegations in the lawsuit have been proven. Neither Amazon Canada nor Joyfull-CA have filed a statement of defence, and neither responded to requests for comment from CTV News this week. According to the lawsuit, the product's Amazon listing contained a 'legal disclaimer' recommending that purchasers read all 'labels, warnings and directions before using or consuming a product,' but the only warning specified was that the device contained parts small enough to pose a choking hazard to young children.
Globe and Mail
16 minutes ago
- Globe and Mail
Dream Unlimited Corp. and CentreCourt Partner on Major Purpose-Built Rental Development in Downtown Toronto
DREAM UNLIMITED CORP. (TSX: DRM) ('Dream') and CentreCourt Developments ('CentreCourt') are pleased to announce their new joint venture to co-develop 49 Ontario St., a mixed-income purpose-built rental community in downtown Toronto. A significant affordable housing component will be included, setting a new benchmark for integrated, vibrant urban living in the city's core. The 49 Ontario St. development directly addresses Toronto's urgent need for housing, adding significant supply to one of Canada's most in-demand markets. Earlier this year, Dream Impact Trust (TSX: the current owner of the redevelopment site, secured up to $647.6 million in government-affiliated financing and obtained waivers for development charges from the City of Toronto for the 800,000 sf multi-family project. Upon completion, the development will feature 1,226 multi-family units, with 22% designated as affordable housing. Proven Partners in Development Dream and CentreCourt have a 14-year history of successfully delivering landmark condominium communities together. While both organizations have deep expertise across the real estate spectrum, this joint venture represents a significant step in expanding their collaboration into purpose-built rental. CentreCourt is recognized for its industry-leading ability to finance, design, and self-perform construction at unmatched speed and efficiency, delivering high build-quality along with exceptional returns on 19 projects totaling over 10,000 homes and $5.6 billion in development value. Dream brings a deep track record in purpose-built rental and unparalleled expertise in structuring and executing public-private partnerships, having developed or currently developing over 4,500 rental units worth over $2 billion upon full build-out. Executive Commentary ' We believe the skills and expertise that have made us leaders in condominium development will be just as valuable in purpose-built rental,' said Gavin Cheung, Managing Partner & President, CentreCourt. '49 Ontario St. will deliver much-needed market rental and affordable housing to downtown Toronto, and we're excited to be partnering with Dream to make it happen.' 'Dream has been at the forefront of delivering purpose-built rental through innovative public-private partnerships,' said Jamie Cooper, President of Development and Income Properties, Dream. 'Working with CentreCourt on 49 Ontario St. brings together complementary strengths to deliver a project that will serve the community for decades to come.' Looking Ahead Building on the 49 Ontario St. partnership, Dream and CentreCourt are working closely together to identify and pursue additional purpose-built rental opportunities in anticipation of the policies announced or under consideration by various levels of governments aimed at accelerating housing development. This includes the federal initiatives such as the MURB policy, the new Build Canada Homes strategy, reductions in development charges, and other measures at the federal, provincial and municipal levels. About Dream Unlimited Dream is a leading developer of exceptional office and residential assets in Toronto, owns stabilized income generating asset in both Canada and the U.S., and has an established and successful asset management business, inclusive of $28 billion of assets under management (1) across four Toronto Stock Exchange ('TSX') listed trusts, our private asset management business and numerous partnerships. We also develop land, residential and income generating assets in Western Canada. Dream has a proven track record for being innovative and for our ability to source, structure and execute on compelling investment opportunities. About CentreCourt CentreCourt is a fully integrated real estate development firm active across all stages of the development lifecycle – land acquisition, zoning, design, marketing, sales/leasing, construction, and customer care. We specialize in high-rise condominium and purpose-built rental communities located near major transit amenities, and employment hubs in the Greater Toronto Area. CentreCourt has delivered over 10,000 homes and $5.6 billion in development value since 2010. In 2022, we launched CentreCourt Platform II, a $400 million fully committed long-term equity fund that provides financial strength and flexibility to support our continued growth and to act decisively in a dynamic market environment. Forward-Looking Information This press release may contain forward-looking information within the meaning of applicable securities legislation, including, but not limited to, statements regarding our objectives and strategies to achieve those objectives; our beliefs, plans, estimates, projections and intentions, and similar statements concerning anticipated future events, future growth, results of operations, performance, business prospects and opportunities, acquisitions or divestitures, tenant base, future maintenance and development plans and costs, capital investments, financing, the availability of financing sources, income taxes, vacancy and leasing assumptions, litigation and the real estate industry in general; as well as specific statements in respect of our development plans, including sizes, uses, density, number of units, amenities and timing thereof; our ability to complete the 49 Ontario St. project and its impact on the community; the level of affordable housing to be included in the 49 Ontario St. project; our expectations regarding our ability to successfully pursue additional purpose-built rental opportunities; and the possible future government initiatives aimed at accelerating housing development. Forward-looking information is based on a number of assumptions and is subject to a number of risks and uncertainties, many of which are beyond Dream's control, which could cause actual results to differ materially from those that are disclosed in or implied by such forward-looking information. These assumptions include, but are not limited to: the nature of development lands held and the development potential of such lands, interest rates and inflation remaining in line with management's expectations, our ability to bring new developments to market, anticipated positive general economic and business conditions, including low unemployment and interest rates, that duties, tariffs and other trade restrictions, if any, will not materially impact our business, positive net migration, oil and gas commodity prices, our business strategy, including geographic focus, anticipated sales volumes, performance of our underlying business segments and conditions in the Western Canada land and housing markets. Risks and uncertainties include, but are not limited to, general and local economic and business conditions, the impact of public health crises and epidemics, employment levels, risks associated with unexpected or ongoing geopolitical events, including disputes between nations, terrorism or other acts of violence, international sanctions and the disruption of movement of goods and services across jurisdictions, inflation or stagflation, regulatory risks, mortgage and interest rates and regulations, risks related to a potential economic slowdown in certain of the jurisdictions in which we operate and the effect inflation and any such economic slowdown may have on market conditions and lease rates, risks related to the imposition of duties, tariffs and other trade restrictions and their impacts, environmental risks, consumer confidence, seasonality, adverse weather conditions, reliance on key clients and personnel and competition. All forward-looking information in this press release speaks as of August 11, 2025. Dream does not undertake to update any such forward-looking information whether as a result of new information, future events or otherwise, except as required by law. Additional information about these assumptions and risks and uncertainties is disclosed in filings with securities regulators filed on SEDAR+ (
Globe and Mail
16 minutes ago
- Globe and Mail
Strong drilling targets identified next to high-grade gold-copper mine
HIGHLIGHTS: Cygnus has identified numerous drilling targets near the historic high-grade Cedar Bay mine, which produced 400Koz Au and 61Kt Cu at an average of 4% CuEq, 2 within the Chibougamau Project Targets identified through ongoing review of historical data and drill logs using Cygnus' innovative custom-built AI solution This highly successful approach has already delivered significant gold and copper results at Golden Eye, which will be included in the imminent resource update Cedar Bay closed in 1990 when the price of copper was just US$1,150/t (US$0.52/lb) and gold was US$380/oz, and is located less than 3km from Cygnus' central processing plant Cygnus aims to significantly increase the remaining unmined high-grade resource at Cedar Bay, which currently stands at 130kt at 8.9% CuEq Indicated and 230kt at 8.5% CuEq Inferred 1 Mineralisation is open in numerous directions, with high-grade intersections outside of the current resource, including: 3 3.4m @ 16.8% CuEq (4.8% Cu, 15.2g/t Au & 23.3g/t Ag) (CB-27-9) 2.9m @ 9.6% CuEq (8.4% Cu, 1.0g/t Au & 43.0g/t Ag) (CB-27-6) At Corner Bay, final infill results have been received and will feed into next month's resource update; These include: 3.5m @ 4.9% CuEq (4.2% Cu, 0.5g/t Au & 27.3g/t Ag) (CB-25-123) 1.8m @ 7.7% CuEq (6.3% Cu, 0.9g/t Au & 45.9g/t Ag) (CB-25-125) Cygnus Executive Chairman David Southam said: 'These latest targets, supported by historical drilling data, are located right next to a high-grade mine, making them compelling. 'Given their potential to help drive resource growth, we are mobilising another rig with the aim of drilling the targets ASAP. 'In the meantime, we are feeding the final results from Corner Bay into our updated resource model, which is set to be released next month. The resource update, combined with a pipeline of targets and multiple rigs turning, ensures we are maximising our ability to create significant shareholder value. 'Uncovering these new growth targets through our compilation strategy adds further weight to the work we are doing in the background which has already delivered success at Golden Eye in a mere six months of taking ownership. The Chibougamau camp has successfully produced a significant amount of high-grade gold and copper over a long history with multiple mines that have not been geologically or economically examined in over 35 years'. TORONTO and PERTH, Australia, Aug. 11, 2025 (GLOBE NEWSWIRE) -- Cygnus Metals Limited (ASX: CY5; TSXV: CYG; OTCQB: CYGGF) ('Cygnus' or the 'Company') is pleased to announce new promising targets next to an historic high-grade mine within its Chibougamau Copper-Gold Project in Quebec. Cedar Bay sits within the Company's northern Chibougamau copper-gold Camp, which boasts the vast majority of the historic production in the region, with a number of historic mines and a production record of nearly 1Mt of copper and 3.5Moz of gold. 2 The Cedar Bay mine, which closed in 1990, was historically one of the highest grade deposits in the camp producing 400Koz Au and 61Kt Cu at an average grade of 4.0% CuEq. 2 Various factors contributed to its premature closure, including low metal prices and a shift in focus of the operating company at the time. Importantly, a high-grade unmined resource remains at Cedar Bay comprised of 130kt at 8.9% CuEq Indicated and 230kt at 8.5% CuEq Inferred Resources. 1 This resource is open in numerous directions, providing Cygnus with potential to significantly grow the resource through systematic exploration drilling. Drill intersections outside of the current resource include: 3 3.4m @ 16.8% CuEq (4.8% Cu, 15.2g/t Au & 23.3g/t Ag) (CB-27-9) 2.9m @ 9.6% CuEq (8.4% Cu, 1.0g/t Au & 43.0g/t Ag) (CB-27-6) Cygnus is seeing tangible success through its historic data compilation strategy. This low-cost approach involves processing over 100,000 scanned documents, including drill logs, some of which have not been looked at in over 35 years and never before in modern 3D software. Success has already been demonstrated in recent drilling at Golden Eye, which is due to be included in the September quarter resource update, and is highlighting significant potential to expand the current resources at Cedar Bay. Given the potential of the new targets, an additional drill rig will target both mineralisation along strike and down dip of the known lodes, utilising the recently compiled data and improved geological understanding of the deposit. This will be the first time this data has been compiled and utilised in targeting in over 35 years. In addition, final results have been received from infill drilling at Corner Bay in time for the resource update due next month. Results include significant intersections of: 3.5m @ 4.9% CuEq (4.2% Cu, 0.5g/t Au & 27.3g/t Ag) (CB-25-123) 1.8m @ 7.7% CuEq (6.3% Cu, 0.9g/t Au & 45.9g/t Ag) (CB-25-125) Cygnus is continuing its dual track strategy of resource growth and conversion with continued exploration drilling and an imminent resource update due later this quarter. In the background, the team continues to process historic data and generate additional drill targets surrounding the known high-grade copper-gold mineralisation. This is a low-risk approach which is playing a significant role in unlocking this historic district. The Chibougamau area has well-established infrastructure giving the Project a significant head start as a copper-gold development opportunity. This infrastructure includes a 900,000tpa processing facility, local mining town, sealed highway, airport, regional rail infrastructure and 25kV hydro power to the processing site. Significantly, the Chibougamau processing facility is the only base metal processing facility within a 250km radius which includes a number of other advanced copper and gold projects. Figure 1: Location of Cedar Bay within the Chibougamau North Camp which boasts a historic production record of nearly 1Mt of copper and 3.5Moz of gold. 2 Figure 2: Composite Long Section through the Chibougamau North Camp illustrating Cedar Bay with intersections of 3.4m @ 16.8% CuEq outside of current resources. Refer to ASX releases dated 15 October 2024, 25 March 2025 and 8 May 2025 for previously announced drilling results. About Cygnus Metals Cygnus Metals Limited (ASX: CY5, TSXV: CYG, OTCQB: CYGGF) is a diversified critical minerals exploration and development company with projects in Quebec, Canada and Western Australia. The Company is dedicated to advancing its Chibougamau Copper-Gold Project in Quebec with an aggressive exploration program to drive resource growth and develop a hub-and-spoke operation model with its centralised processing facility. In addition, Cygnus has quality lithium assets with significant exploration upside in the world-class James Bay district in Quebec, and REE and base metal projects in Western Australia. The Cygnus team has a proven track record of turning exploration success into production enterprises and creating shareholder value. Forward Looking Statements This release may contain certain forward-looking statements and projections regarding estimates, resources and reserves; planned production and operating costs profiles; planned capital requirements; and planned strategies and corporate objectives. Such forward looking statements/projections are estimates for discussion purposes only and should not be relied upon. They are not guarantees of future performance and involve known and unknown risks, uncertainties and other factors, many of which are beyond Cygnus' control. Cygnus makes no representations and provides no warranties concerning the accuracy of the projections and disclaims any obligation to update or revise any forward-looking statements/projections based on new information, future events or otherwise except to the extent required by applicable laws. While the information contained in this release has been prepared in good faith, neither Cygnus or any of its directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as to the fairness, accuracy, completeness or correctness of the information, opinions and conclusions contained in this release. Accordingly, to the maximum extent permitted by law, none of Cygnus, its directors, employees or agents, advisers, nor any other person accepts any liability whether direct or indirect, express or limited, contractual, tortuous, statutory or otherwise, in respect of the accuracy or completeness of the information or for any of the opinions contained in this release or for any errors, omissions or misstatements or for any loss, howsoever arising, from the use of this release. End Notes The estimate of mineralisation at the Chibougamau Project is a foreign estimate prepared in accordance with CIM Standards. A competent person has not done sufficient work to classify the foreign estimate as a mineral resource in accordance with the JORC Code, and it is uncertain whether further evaluation and exploration will result in an estimate reportable under the JORC Code. Refer to Appendix B for a breakdown of the Foreign Mineral Resource Estimate. Historic production statistics for the Chibougamau area are recorded in Leclerc. F, Harris. L. B, Bedard. J. H, Van Breeman. O and Goulet. N. 2012, Structural and Stratigraphic Controls on Magmatic, Volcanogenic, and Shear Zone-Hosted Mineralization in the Chapais-Chibougamau Mining Camp, Northeastern Abitibi, Canada. Society of Economic Geologists, Inc. Economic Geology, v. 107, pp. 963–989. Refer to Cygnus' ASX announcement 'Copper Merger and Equity Raise' dated 15 October 2024. Qualified Persons and Compliance Statements The scientific and technical information in this announcement has been reviewed and approved by Mr Louis Beaupre, the Quebec Exploration Manager of Cygnus, a 'qualified person' as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects. The Exploration Results disclosed in this announcement are also based on and fairly represent information and supporting documentation compiled by Mr Beaupre. Mr Beaupre holds options in Cygnus. Mr Beaupre is a member of the Ordre des ingenieurs du Quebec (P. Eng.), a Registered Overseas Professional Organisation as defined in the ASX Listing Rules, and has sufficient experience which is relevant to the style of mineralisation and type of deposits under consideration and to the activity which has been undertaken to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Mr Beaupre consents to the inclusion in this release of the matters based on the information in the form and context in which they appear. The Company first announced the foreign estimate of mineralisation for the Chibougamau Project on 15 October 2024. The Company confirms that the supporting information included in the original announcement continues to apply and has not materially changed, notwithstanding the clarification announcement released by Cygnus on 28 January 2025 ('Clarification'). Cygnus confirms that (notwithstanding the Clarification) it is not aware of any new information or data that materially affects the information included in the original announcement and that all material assumptions and technical parameters underpinning the estimates in the original announcement continue to apply and have not materially changed. Cygnus confirms that it is not in possession of any new information or data that materially impacts on the reliability of the estimates or Cygnus' ability to verify the foreign estimates as mineral resources in accordance with the JORC Code. The Company confirms that the form and context in which the Competent Persons' findings are presented have not been materially modified from the original market announcement. The information in this announcement that relates to previously reported Exploration Results at the Company's projects has been previously released by Cygnus in ASX Announcements as noted in the text and End Notes. Cygnus is not aware of any new information or data that materially affects the information in these announcements. The Company confirms that the form and context in which the Competent Persons' findings are presented have not been materially modified from the original market announcements. Individual grades for the metals included in the metal equivalents calculation for the foreign estimate are in Appendix B of this release. Metal equivalents for the foreign estimate of mineralisation have been calculated at a copper price of US$8,750/t, gold price of US$2,350/oz, with copper equivalents calculated based on the formula CuEq (%) = Cu(%) + (Au (g/t) x 0.77258). Individual grades for the metals included in the metal equivalents calculation for the exploration results are in Appendix A of this release. Metal equivalents for exploration results have been calculated at a copper price of US$8,750/t, gold price of US$2,350/oz and silver price of US$25/oz. Copper equivalents are calculated based on the formula CuEq(%) = Cu(%) + (Au(g/t) x 0.77258)+(Ag(g/t) x 0.00822). Gold equivalents are calculated based on the formula AuEq(g/t) = Au(g/t) +(Cu(%) x 1.29436)+(Ag(g/t) x 0.01064). Metallurgical recovery factors have been applied to the metal equivalents calculations, with copper metallurgical recovery assumed at 95% and precious metal (gold and silver) metallurgical recovery assumed at 85% based upon historical production at the Chibougamau Processing Facility, and the metallurgical results contained in Cygnus' announcement dated 28 January 2025. It is the Company's view that all elements in the metal equivalents calculations in respect of the foreign estimate and exploration results have a reasonable potential to be recovered and sold. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. APPENDIX A – Significant Intersections from Infill Drilling Coordinates given in UTM NAD83 (Zone 18). Intercept lengths may not add up due to rounding to the appropriate reporting precision. Significant intersections reported above 1% CuEq over widths of greater than 1m. True width estimated to be 80% of downhole thickness. HOLEID X Y Z Azi Dip Depth From (m) To (m) Interval (m) Cu (%) Au (g/t) Ag (g/t) CuEq (%) CB-25-123 554619 5510023 394.0 96.5 -60 574.0 559.0 560.8 1.8 6.3 0.9 45.9 7.4 CB-25-124 554619 5510023 394.0 92.0 -66 679.0 667.1 669.8 2.6 1.5 0.1 6.8 1.6 CB-25-125 554619 5510023 394.0 84.0 -64 643.5 594.0 598.5 4.5 3.4 0.4 22.1 3.9 CB-25-127 555071 5509889 402.8 90.0 -60 300.0 267.1 269.4 2.3 2.7 0.5 10.4 3.2 APPENDIX B – Chibougamau Copper-Gold Project – Foreign Mineral Resource Estimate Disclosures as at 30 March 2022 Deposit Category Tonnes (k) Cu Grade (%) Au Grade (g/t) Cu Metal (kt) Au Metal (koz) CuEq Grade (%) Corner Bay (2022) Indicated 2,700 2.7 0.3 71 22 2.9 Inferred 5,900 3.4 0.3 201 51 3.6 Devlin (2022) Measured 120 2.7 0.3 3 1 2.9 Indicated 660 2.1 0.2 14 4 2.3 Measured & Indicated 780 2.2 0.2 17 5 2.4 Inferred 480 1.8 0.2 9 3 2.0 Joe Mann (2022) Inferred 610 0.2 6.8 1 133 5.5 Cedar Bay (2018) Indicated 130 1.6 9.4 2 39 8.9 Inferred 230 2.1 8.3 5 61 8.5 Total Measured & Indicated 3,600 2.5 0.6 90 66 3.0 Inferred 7,200 3.0 1.1 216 248 3.8 APPENDIX C – 2012 JORC Table 1 Section 1 Sampling Techniques and Data Criteria JORC Code explanation Commentary Sampling techniques Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. All drilling conducted by Cygnus Metals at the Chibougamau Project was completed under the supervision of a registered professional geologist as a Qualified Person (QP) who is responsible and accountable for the planning, execution, and supervision of all exploration activity as well as the implementation of quality assurance programs and reporting. All Cygnus drilling reported is NQ size (47.8 mm diameter). Include reference to measures taken to ensure sample representativity and the appropriate calibration of any measurement tools or systems used. All sample collection, core logging, and specific gravity determinations were completed by Cygnus Metals under the supervision of a professionally qualified registered geologist. NQ core was marked for splitting during logging and is sawn using a diamond core saw with a mounted jig to assure the core is cut lengthwise into equal halves. Half of the cut core is placed in clean individual plastic bags with the appropriate sample tag. QA/QC is done in-house by Cygnus Metals geologists with oversight from the Senior Geologist. The check samples (blanks and standards – 4% of total samples with another 2% of core duplicates taken on half split core) that were inserted into the sample batches are verified against their certified values and are deemed a pass if they are within 3 standard deviations of the certified value. The duplicates are evaluated against each other to determine mineralization distribution (nugget). If there are large discrepancies in the check samples, then the entire batch is requested to be re-assayed. The samples are then placed in bags for shipment to the offsite laboratory's facility. The remaining half of the core is retained and incorporated into Cygnus's secure, core library located on the property. Aspects of the determination of mineralisation that are Material to the Public Report. In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information. Industry standard sampling practices were used with sample lengths ranging from 0.3 m to 1.0 m and respected geological contacts. Sample tags were placed at the beginning of each sample interval and the tag numbers were recorded in a centralised database. Sampling practice is considered to be appropriate to the geology and style of mineralisation. Drilling techniques Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc). Diamond core was drilled using surface diamond rigs with industry recognised contractors Miikan Drilling. Miikan is a joint venture between Chibougamau Diamond Drilling Ltd., the First Nations community of Ouje-Bougoumou and the First Nations community of Mistissini both located in the Eeyou Istchee territory. Drilling was conducted using NQ core size. Directional surveys have been taken at 50m intervals. Drill sample recovery Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. Diamond core recovery was measured for each run and calculated as a percentage of the drilled interval. Overall, the core recoveries are excellent in the Chibougamau area. As a result, no bias exists. Logging Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. All core was geologically and geotechnically logged. Lithology, veining, alteration and mineralisation are recorded in multiple tables of the drillhole database. Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. Geological logging of core is qualitative and descriptive in nature. The total length and percentage of the relevant intersections logged. 100% of the core has been logged. Sub- sampling techniques and sample preparation If core, whether cut or sawn and whether quarter, half or all core taken. If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled. The NQ diameter the core was sawn in half following a sample cutting line determined by geologists during logging and submitted for analysis on nominal 1m intervals or defined by geological boundaries determined by the logging geologist. Each core sample is assigned a tag with a unique identifying number. Sample lengths are typically one metre but can be depending on zone mineralogy and boundaries. This sampling technique is industry standard and deemed appropriate. Sample sizes are considered appropriate to grain size of the materials being sampled. Quality of assay data and laboratory tests The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. Sample (NQ size half core) preparation and fire assay analysis were done at Bureau Veritas Commodities Canada Ltd ('BV') in Timmins, Ontario, and ICP-ES multi-elements analysis was done at BV in Vancouver, B.C. Samples were weighed, dried, crushed to 70% passing 2 mm, split to 250 g, and pulverized to 85% passing 75 µm. Samples are fire assayed for gold (Au) (50 g) and multi-acid digestion ICP-ES finish, for 23 elements (including key elements Ag, Cu, Mo). Samples with visible gold or likely to have gold grains are analysed with metallic screen fire assay. Samples assaying >10.0 g/t Au are re-analysed with a gravimetric finish using a 50 g charge. Samples assaying >10% Cu are re-analysed with a sodium peroxide fusion with ICP-ES analysis using a 0.25 g charge. For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. None used. Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established. At Bureau Veritas, laboratory QC procedures involve the use of internal certified reference material as assay standards, along with blanks, duplicates and replicates. Verification of sampling and assaying The verification of significant intersections by either independent or alternative company personnel. Verification of sampling was made by Cygnus Metals and other professional consultant geologists. The use of twinned holes. No hole is twinned. Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. All logging data was completed, core marked up, logging and sampling data was entered directly into the database. The logged data is stored on the site server directly. Discuss any adjustment to assay data. There was no adjustment to the assay data. Location of data points Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. The location of the drill holes and the aiming points for the orientation of the drill holes were indicated on the ground using identified stakes. The stakes marking the location of the drillholes were set up and located with a Garmin GPS model 'GPSmap 62s' (4m accuracy). Surveys are collected using a Reflex EZ-Shot® single-shot electronic instrument with readings collected at intervals of approximately every 30 m downhole plus a reading at the bottom of the hole. Specification of the grid system used. The grid system used is UTM NAD83 (Zone 18). Quality and adequacy of topographic control. A Digital Terrane Model (DTM) has been used to accurately plot the vertical position of the holes, which is considered to provide an adequate level of topographic control. Data spacing and distribution Data spacing for reporting of Exploration Results. The drill spacing for recent drilling is considered appropriate for this type of exploration. Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. No resource estimation is made. Whether sample compositing has been applied. No sample compositing has been applied. Orientation of data in relation to geological structure Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. Recent drilling is orientated approximately at right angles to the currently interpreted strike of the known interpreted mineralisation. If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. No bias is considered to have been introduced by the existing sampling orientation. Sample security The measures taken to ensure sample security. Core was placed in wooden core boxes close to the drill rig by the drilling contractor. The core was collected daily by the drilling contractor and delivered to the secure core logging facility. Access to the core logging facility is limited to Cygnus employees or designates. Audits or reviews The results of any audits or reviews of sampling techniques and data. No audits or reviews of sampling techniques or data have been undertaken, therefore information on audits or reviews is not yet available. Section 2 Reporting of Exploration Results (Criteria listed in the preceding section also apply to this section.) Criteria JORC Code Explanation Commentary Mineral tenement and land tenure status Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. The data reported within this announcement is from the Chibougamau Project. The Chibougamau project consists of 3 properties which include: Copper Rand, 14,383 ha (15 mining concession and 311 exploration claims). Includes Cedar Bay, Golden Eye and Colline. Corner Bay – Devlin (1 mining license, 134 exploration claims owned 100% by CBAY and 17 claims owned 56.4% by CBAY/43.6% Pan American Silver) Joe Mann (2 mining concessions, 82 claims owned 100% by CBAY, and 68 claims and 1 mining concession owned 65% by CBAY/35% by SOQUEM) CBAY Minerals Inc. ('CBAY'), a wholly owned subsidiary of Cygnus, is the owner of all claims and leases, except where otherwise noted above. The properties collectively making up the Project are in good standing based on the Ministry of Energy and Natural Resources (Ministère de l'Énergie et des Ressources Naturelles) GESTIM claim management system of the Government of Québec. The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area. All tenure is in good standing. Exploration done by other parties Acknowledgment and appraisal of exploration by other parties. The Chibougamau Copper and Gold project comprising Corner Bay, Devlin, Cedar Bay and Joe Mann has seen an extensive exploration history dating back to the early 1900s. The Preliminary Economic Assessment (as referred to in the Company's announcement of 15 October 2024) provides a detailed history of the exploration activities undertaken by previous explorers. Corner Bay was first identified as a prospect in 1956 1956 – 1972 eight drilling programs totalling 1,463 m and various geophysical and electromagnetic (EM) surveys 1973 – 1981 Riocanex and Flanagan McAdam: ground geophysical surveys and 43 diamond drill holes 1982 – 1984 Riocanex and Corner Bay Exploration: 38 drill holes and metallurgical test work 1988 – 1991 Corner Bay Exploration: diamond drilling, geophysical surveys and geological characterisation with initial MRE 1992 – 1994 SOQUEM optioned and acquired a 30% interest, and completed diamond drilling 1994 Explorations Cache Inc and Resources MSV Inc: diamond drilling 2004 – 2006 GéoNova and MSV: 98 diamond drill holes and first Technical Report on the Corner Bay project reporting a MRE 2007 – 2009 Campbell: diamond drilling and bulk sample 2012 - 2019 CBAY / AmAuCu: diamond drilling and MRE Devlin identified in 1972 by airborne survey flown by the MERN 1979 – 1981 diamond drilling, geophysical surveys 1981 development commenced Joe Mann identified in 1950 with the commencement of mining activities occurring in 1956 The Joe Mann mine operated underground during three different periods from 1956 to 2007 In July 2012, Resources Jessie acquired the Joe Mann mine property, but conducted only surface exploration work Cedar Bay was discovered prior to 1927 by Chibougamau McKenzie Mines Ltd From initial discovery to 2013 various surface and underground drilling campaigns and geophysical surveys undertaken by various companies Colline was first discovered with mapping and sampling and then drilled in the 1950s with follow up drilling in 1955. In the 1950s a shaft was sunk but the deposit was never mined The deposit was later tested with three drill holes and six regional drill holes throughout two drilling campaigns in 1984 and 1986/87 Exploration at Colline has been halted historically with the discovery of and focus on other deposits in the region Golden Eye (previously known as Dore Ramp) was drilled in a few different phases from 1984 to 1992. A total of 47 drill holes from surface are reported during that period A double ramp of approximately 1 kilometre was excavated in 1991-92 to a vertical depth of 160 meters Underground drilling campaign of 46 holes totalling 10,200 meters tested the deposit mainly to a depth of 240 meters (only five holes tested the deposit between 300 and 600 meters) Geology Deposit type, geological setting and style of mineralisation. Corner Bay and Devlin are located at the northeastern extremity of the Abitibi subprovince in the Superior province of the Canadian Shield and are examples of Chibougamau-type copper-gold deposits. The Abitibi subprovince is considered as one of the largest and best-preserved greenstone belts in the world and hosts numerous gold and base metal deposits. The Corner Bay deposit is located on the southern flank of the Doré Lake Complex (DLC). It is hosted by a N 15° trending shear zone more or less continuous with a strong 75° to 85° dip towards the west. The host anorthosite rock is sheared and sericitized over widths of 2 m to 25 m. The deposit is cut by a diabase dyke and is limited to the north by a fault structure and to the south by the LaChib deformation zone. The Corner Bay deposit consists of three main mineralized lodes (subparallel Main Lode 1 and Main Lode 2 above the dyke, and Main Lode below the dyke that make up the bulk of the deposit. The Corner Bay deposit has been traced over a strike length to over 1,100 m to a depth of 1,350 m and remains open at depth. The mineralization is characterized by veins and/or lenses of massive to semi-massive sulphides associated with a brecciated to locally massive quartz-calcite material. The sulphide assemblage is composed of chalcopyrite, pyrite, and pyrrhotite with lesser amounts of molybdenite and sphalerite. Late remobilized quartz-chalcopyrite-pyrite veins occur in a wide halo around the main mineralization zones. Devlin is a flat-lying, copper-rich lodes-hosted deposit in a polygenic igneous breccia that is less than 100 m from the surface. The tabular bodies have been modelled as four nearly horizontal lodes: a more continuous lower zone and three smaller lodes comprising the upper zone. Mineralization is reflected as a fracture zone often composed of two or more sulphide-quartz lodes and stringers. Thickness of the mineralized zones range from 0.5 m to 4.4 m. It has been diluted during modelling to reflect a minimum mining height of 1.8 m. The Joe Mann deposit is characterized by east-west striking shear hosted lodes that extend beyond 1,000 m vertically with mineralization identified over a 3 km strike length. These shear zones form part of the Opawica-Guercheville deformation zone, a major deformation corridor cutting the mafic volcanic rocks of the Obatogamau Formation in the north part of the Caopatina Segment. The gabbro sill hosts the Main Zone and the West Zone at the mine, while the South Zone is found in the rhyolite. These three subvertical E-W (N275°/85°) ductile-brittle shear zones are sub-parallel to stratigraphy and to one another, with up to 140 m to 170 m of separation between them. These shear zones are hosted within a stratigraphic package composed of iron-magnesium (Fe-Mg) carbonate and sericite altered gabbro sills, sheared basalts, and intermediate to felsic tuffs intruded by various felsic intrusions. The Joe Mann gold mineralization is hosted by decimetre scale quartz-carbonate lodes (Dion and Guha 1988). The lodes are mineralized with pyrite, pyrrhotite, and chalcopyrite disposed in lens and lodelets parallel to schistosity, and occasionally visible gold. There are some other minor, mineralized structures, e.g., North and South-South Zones, with limited vertical and horizontal extensions. The Cedar Bay deposit is hosted by a sheared and altered gabbroic-anorthosite of the DLC. The meta-anorthosites are typically comprised of 70% to 90% plagioclase, which has been heavily altered to epidote and albite. The Cedar Bay deposit generally has a northwest strike and dips steeply to the northeast. The gold-copper sulphide veins average approximately 1.5 m in width and are tens to hundreds of metres in strike length. The individual mineralization lenses have approximately 3:1 down dip to along strike anisotropies. The veins are comprised of pyrite and chalcopyrite with some gold and minor sphalerite. The main alteration minerals are chlorite, quartz, and carbonates. Locally, pyrrhotite dominates the vein mineral assemblage. Pyrrhotite has a very heterogeneous distribution within the mineralization. Drill hole Information A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: easting and northing of the drill hole collar elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar dip and azimuth of the hole down hole length and interception depth hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. All requisite drill hole information is tabulated elsewhere in this release. Refer Appendix A of the body text. Data aggregation methods In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. For recent results, drill hole intersections are reported above a lower cut-off grade of 1% CuEq over greater than 1m width. Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. A maximum of 1m internal waste was allowed. The assumptions used for any reporting of metal equivalent values should be clearly stated. Individual grades for the metals included in the metal equivalents calculation for the exploration results are in Appendix A of this release. Metal equivalents for exploration results have been calculated at a copper price of US$8,750/t, gold price of US$2,350/oz and silver price of US$25/oz. Copper equivalents are calculated based on the formula CuEq(%) = Cu(%) + (Au(g/t) x 0.77258)+(Ag(g/t) x 0.00822). Gold equivalents are calculated based on the formula AuEq(g/t) = Au(g/t) + (Cu(%) x 1.29436) + (Ag(g/t) x 0.01064). Metallurgical recovery factors have been applied to the metal equivalents calculations, with copper metallurgical recovery assumed at 95% and precious metal (gold and silver) metallurgical recovery assumed at 85% based upon historical production at the Chibougamau Processing Facility, and the metallurgical results contained in Cygnus' announcement dated 28 January 2025. It is the Company's view that all elements in the metal equivalent calculations have a reasonable potential to be recovered and sold. Relationship between mineralisation widths and intercept lengths These relationships are particularly important in the reporting of Exploration Results. If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known'). All intersections reported in the body of this release are down hole. For recent drill holes, holes are drilled as close to orthogonal to the plane of the mineralized lodes as possible. True width is estimated to be about 80% of the downhole drill intersection. Diagrams Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include,but not be limited to a plan view of drill hole collar locations and appropriate sectional views. Refer Figure 3 Location of recent drilling at Corner Bay: Balanced reporting Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results. Reported results from infill drilling at Corner Bay includes 4 holes for 2,196.5m. All results greater than 1% CuEq over greater than 1m width reported. Other substantive exploration data Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. There is no other substantive exploration data. Further work The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive. The Company plans to conduct drill testing of additional mineralisation as well as step out drilling of existing lodes. More information is presented in the body of this report. Diagrams in the main body of this release show areas of possible resource extension on existing lodes. The Company continues to identify and assess multiple other target areas within the property boundary for additional resources. Figure 3. Location of recent drilling at Corner Bay 1 The estimate of mineralisation at the Chibougamau Project is a foreign estimate prepared in accordance with CIM Standards and is not reported in accordance with the JORC Code. A competent person has not done sufficient work to classify the foreign estimate as a mineral resource in accordance with the JORC Code, and it is uncertain that following evaluation and/or further exploration work that the foreign estimate will be able to be reported as a mineral resource or ore reserve in accordance with the JORC Code.
