From Vision to Action: CIIE Empowers Global Development Through Inclusive Cooperation
As the expo approaches, preparations have entered a new and dynamic phase. On May 22, a dedicated matchmaking event was held in Chongqing, bringing together nearly 40 exhibitors and over 110 local buyers. The event laid a solid foundation for deeper cooperation in the lead-up to the CIIE. To date, an exhibition area of over 280,000 square meters has been booked for this year's CIIE. This year, the exhibition layout has been further optimized to spotlight innovation, advanced technologies, and cutting-edge services.
Building on this momentum, the upcoming China-Central Asia Summit will boost exchanges and cooperation. As regular participants in the CIIE, Central Asian countries have continued to strengthen ties with China through this key platform. For instance, at the seventh CIIE, Kazakh businesses took part in an unprecedented scale, presenting a broader range of high-quality products to the Chinese market.
The upcoming eighth CIIE is set to attract a broader spectrum of exhibitors, professional buyers and visitors across sectors. Meanwhile, the HQF will serve as a key venue for dialogue on open economies and inclusive globalization. For more information, visit CIIE official website: https://www.ciie.org/zbh/en/
Contact:
Ms. Cui Yan
Tel.: 0086-21-968888
Email: [email protected]
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Winnipeg Free Press
an hour ago
- Winnipeg Free Press
Swiss watchmaker Swatch apologies for ad showing gesture seen as racist
GENEVA (AP) — Swiss watchmaker Swatch apologized Monday for an ad campaign that upset consumers in China and elsewhere and said it had 'immediately removed all related materials worldwide.' In an image for the Swatch Essentials collection, an Asian male model is shown pulling the edges of his eyelids upward and backward with his fingers — a gesture seen as derogatory and racist, Swiss public broadcaster SRF reported. Monday Mornings The latest local business news and a lookahead to the coming week. Swatch wrote on Instagram that 'we sincerely apologize for any distress or misunderstanding this may have caused.' It said it would 'treat this matter with the utmost importance.' SRF reported that the apology was also posted on the Chinese social network Weibo in Chinese and English.
Cision Canada
an hour ago
- Cision Canada
LONGi Launches Lightweight Module, Officially Entering Low-Load Market
XI'AN, China, Aug. 18, 2025 /CNW/ -- As solar power becomes globally popularized, over 30% of rooftops still not suit to install solar panels due to load issues. Despite those owners eager for green transformation, most of them have to give up because of high reinforcement costs. On August 15, 2025, LONGi launched the Hi-MO X10 Light design Module, officially targeting the low-load C&I market. The Hi-MO X10 Light design Module is based on HPBC 2.0 cell, maintaining excellent performance in safety, reliability, and high-efficiency, with a maximum efficiency of 24.8% and a maximum power of 560W. The module weighs 7.2KG/㎡, a reduction of over 30% compared to conventional modules. Lighter, More cost saving, and Safer On May 25, LONGi first launched this module in the Chinese market, leading the industry in lightweight design, convenient installation, and reliability. Lighter: The Hi-MO X10 Light Design Module features multiple weight-reduction processes, weighing only 7.2KG/㎡, a 42% reduction from conventional Dual glass TOPCon modules. A 10,000㎡ rooftop can reduce the load by 34 tons. Preliminary estimates show this module could enable 1 billion square meters of factory rooftops worldwide to access green energy. More cost saving: The Hi-MO X10 Light Design Module achieves a conversion efficiency of 24.8%, far exceeding 21.6% of other products. The power of a single module is 140W higher than conventional lightweight modules, and the overall BOS cost is reduced by 33%. In the past, old factories always did not pre-reserve solar loads, so it is necessary to reinforce rooftops to install solar system. Take Chinese buildings as an example, the cost of reinforcing the "main structure+purlins" is as high as 0.5RMB yuan/W. For a 10,000㎡ rooftop, the reinforcement cost is approximately 500,000RMB yuan . On the other hand, many such factories cannot carry out internal reinforcement work due to production continuity issues. For a 10,000㎡ rooftop, the entire process of roof reinforcement (surveying, designing, constructing, inspecting) and solar system installation takes about 42 days. Lightweight modules only take 8-10 days, saving both time and costs. Safer: Although the weight of the Hi-MO X10 Light Design Module is reduced, its quality remains uncompromised. The module adds one-line welding ribbon on the back to form an efficient mechanical distribution, increasing the maximum bearing capacity by over 50% and reducing the deformation at the center of the module by 50%, effectively improving the module's compression and bending resistance. Meanwhile, the thickness of the module frame is increased by 5%. With a special frame structure design, the overall mechanical strength is increased by 20%, which can inhibit frame distortion and deformation in case of strong winds or snow. Dual-Protection Function: Anti-Fire and Anti-Shading The Hi-MO X10 Light Design Module continues the Anti-shading function of the Hi-MO X10 series. Anti-Fire: In case of local shading by bird droppings or leaves, this module can significantly reduce the hot-spot temperature under shadow, preventing overheating and fires. Laboratory and field tests show that under the same leaf shading, the local temperature of the Hi-MO X10 Light Design Module is only 80°C, greatly reducing the risk of fire. Anti-Shading: According to the two-month empirical test by CGC Certification, under different shading conditions (full light without shading, simulated bird droppings, simulated shading in wind and solar hybrid fields), the average backplane temperature of HPBC 2.0 modules is 7.43°C lower than that of TOPCon modules. The lower operating temperature effectively prevents safety risks caused by local shading. Leading Performance as Before So far, there are more than ten types of lightweight or flexible modules on the market, but they are prone to lack reliability during long-term outdoor use. Yellowing, leading to reduced light transmittance and power degradation; deformation, which increasing the safety risks of electric leakage or short circuits; fires, with toxic gases such as hydrogen fluoride releasing. Most lightweight modules based on PERC, TOPCon, and other technologies with a conversion efficiency of only about 21%. In terms of structure, most of the flexible modules have no frames, making them more prone to micro cracks. The adhesive installation method not only poses a risk of debonding during long-term use but also increases the difficulty of later maintenance. The market has long awaited a lightweight module which is "lighter, more cost saving, and safer". Regarding the launch of this product, Jiang Dongyu, President of LONGi's Distributed Business Group, said that LONGi has always adhered to the development philosophy of stability, reliability, and technological leadership even when facing the trend of "cost reduction" in the solar industry. "When the demand for cost reduction conflicts with the "reliability" of products, LONGi will firmly prioritizes reliability." said Jiang Dongyu. The launch of the Hi-MO X10 Light Design Module not only address the pain points of the low-load rooftop market, but also represents another implementation of LONGi's " scenario-based+ differentiated " product strategy. In the future, LONGi will continue to drive "dual innovation" in solar technology and product R&D to create more scenario-based products and solutions.
Globe and Mail
2 hours ago
- Globe and Mail
China Unicom Beijing Powers World's First Humanoid Robot Games with Smart 5G-A Network
Beijing, China--(Newsfile Corp. - August 18, 2025) - At the 2025 World Humanoid Robot Games which just kicked off, China Unicom Beijing provides full 5G-A network coverage outside and inside the event venue -- Beijing National Speed Skating Oval. This cutting-edge network, characterized by its high uplink capacity, reliability, and security, is enabling over 500 robots from nearly 280 teams worldwide to compete at their best across athletic, performance, industrial, and healthcare contests. It is also significantly enhancing the experience for tens of thousands of spectators. Such robust 5G-A networks will transform society by propelling humanoid robots beyond competitions and into full-scale commercialization. China Unicom at the World's First Humanoid Robot Games To view an enhanced version of this graphic, please visit: The AI industry is developing rapidly. Multimodal and cross-device interactions are reshaping personal experiences, IoT connections are growing exponentially, and AI is now woven into the fabric of core production processes, completely redefining workflows. These embodied AI robots are a demanding AI application, requiring a specialized network that allows them to perceive their surroundings, make instant decisions, pinpoint their location precisely, and coordinate with other robots. With the games already in play, China Unicom Beijing is delivering reliable, extensive, and high-uplink connectivity for both robots and spectators outside and inside the arena. Outside, a 5G-A 3D network coordinating 1:1 high and mid bands boosts peak uplink and downlink user-perceived rates to 4 Gbps and 11.2 Gbps, respectively. Inside, LampSite offers 300 MHz bandwidth, achieving a peak network speed of 2.4 Gbps. "Our 5G-A networks currently serve users, and we're upgrading them to support embodied AI as well," said Qin Yang, Deputy General Manager of China Unicom Beijing. "Our 5G-A network for this event reflects this progress. It dedicates a channel for spectators and a dynamically scalable one for robots, realizing seamless connectivity for both spectators and robots even during peak usage. In the robot sector, 5G-A will also be key to enabling low-latency remote control." Samuel Chen, Vice President of Marketing for Huawei's Wireless Network Product Line, said, "At the humanoid robot games, the network must support many robots, spectators, and live media streams. It needs to provide high uplink capacity, low latency, high reliability, and wide coverage." Inside the venue, a 5G-A digital indoor system has been developed utilizing 300 MHz ultra-high-bandwidth spectrum. It delivers an uplink speed above 100 Mbps, allowing multiple 4K machine vision streams to be uploaded without frame loss. It also ensures air interface latency remains below 20 ms, so robots can respond to commands instantly. Outside the venue, a 5G-A 3D network coordinates 1:1 high and low bands to achieve downlink and uplink speeds of 10 Gbps and 4 Gbps, respectively. With this fast connectivity, 8K panoramic cameras merge footage live, media like CCTV upload UHD shallow-compressed signals in seconds, and crowds live stream and share videos without lag. As the world's first international sports event for humanoid robots, the games set the stage for a groundbreaking fusion of technology and athletics, signaling AI's expansion into sports at scale. As the event's exclusive global communications partner, China Unicom is dedicated to ensuring millisecond-level network response and zero downtime with its 5G-A, AI, and all-optical network expertise through collaboration with partners. Beyond the event, China Unicom aims to inject strong momentum into the robotics industry. Hashtag: #Huawei The issuer is solely responsible for the content of this announcement.
