
What is India's latest approach to localising EV manufacturing?
More than a year since it was announced, the Ministry of Heavy Industries Monday notified guidelines of the Scheme to Promote Manufacturing of Electric Passenger Cars in India. The scheme reduces existing duties on import of vehicles for overseas manufacturers from the present 70-100% to 15% subject to the maker meeting minimum requirements for investment and setting up facilities in the country. However, Union Minister H.D. Kumaraswamy indicating luxury EV maker Tesla's unwillingness to manufacture in India have prompted concerns about the promise of the scheme.
Also Read | Centre notifies guidelines to boost electric car production
What does the policy propose?
At the centre of the notified policy is the provision to reduce customs duty on the import of ready-to-ship completely assembled electric four-wheelers to 15%. This would apply to all vehicles valued at $35,000 - circumscribing cost, insurance and freight (CIF) - for a period of five years. However, this would be subject to the manufacturer investing a minimum of ₹4,150 crore over the next three years. They would also be expected to build infrastructure and facilities to enable 25% of the overall manufacturing activity be undertaken domestically (domestic value addition, or DVA) within three years, and 50% within five years. MHI specifies that a maximum of 8,000 vehicles can be imported at the reduced duty rate in a year with no carrying over of unutilised limits. The maximum duty permitted to be foregone under the scheme has been capped at ₹6,484 crore. Broadly, the objective of the overall scheme is to find a midway point where affordability for a captive market is attained, whilst also recognising that import substitution would require a layered approach and a protracted timeline.
MHI calculated that an imported vehicle valued at $35,000 (₹29.75 lakh) would now be liable to pay basic customs duty of ₹4.6 lakh at the reduced 15% rate compared to ₹20.8 lakhs at the erstwhile 70% rate. Therefore, combining with IGST levied at 5% on the resulting value, the total foregone duty amount to ₹17.2 lakh with the final landing cost coming to about ₹36 lakh. Now, in line with an initial investment of ₹4,150 crore and a foregone duty of ₹17.2 lakh for each vehicle, the maker would be allowed to import 24,155 units in total.
EDITORIAL | Falling short: On India's EV journey
But does this help our overall ecosystem?
Shouvik Chakraborty, Assistant Research Professor at the Political Economy Research Institute at the University of Massachusetts Amherst (U.S.) argues that a domestic industrial policy aligned with a vision for future could be a step in the right direction. Although he holds the current policy would bode well for India only if there is sharing of technology with domestic automakers. Further, he observes, 'Countries these days are extremely cautious about transferring technology outside (to maintain their competitive advantage). In that light, India must not become a domestic hub for producing components of a vehicle.'
Dinesh Abrol, adjunct faculty at the Transdisciplinary Research Cluster on Sustainable Studies at JNU in Delhi, observes that no foreign firm has ever helped build some other country's ecosystem. He attributed China and South Korea's ability to build manufacturing setups to their focus on skilling, research and development alongside undertaking innovation projects. 'This enabled conditions for a technology transfer and prompting companies to come and invest into the ecosystem,' he states. Essential to note, China as the leading manufacturer of EVs accounted for 70% of the global manufacturing in 2024.
The other set of concerns relate to the potentially increased focus on four-wheeler EVs, and their probable impact on India's ambitions to achieve Net Zero by 2070. According to data compiled by the Federation of Automobile Dealers Association (FADA), EVs accounted for 7.8% of all vehicles sold in FY 2025. This was predominantly led by electric three-wheelers (at 57% in its category), followed by two-wheelers (6.1%), passenger vehicles (2.6%) and commercial vehicles (0.9%). Significantly, the International Energy Association (IEA) identified India as the world's largest market for electric three-wheelers in 2024. Sales grew about 20% YoY, it observed. Mr. Chakraborty emphasises that most Indians travel by public transport, and policies must also focus on building the same. 'Means of last mile connectivity, as bikes and shuttles, is also very important. It is not of much help if one has to walk few kilometres to avail public transport. This is not how we can fight climate change' he states.
The final set of concerns relate to input costs. S&P Global Mobility observed in an analysis published March this year that high initial costs, typically 20-30% higher than ICE counterparts, coupled with India's reliance on imported components and batteries 'hinder' the growth of the EV sector. It held notwithstanding government efforts to promote localisation through varied policies, the rate was 'not increasing as expected'.
DATA | Union Budget 2025: Allocation for electric mobility schemes rise by 20%
What about our industrial ambitions in the EV space?
Other than the impact on the ecosystem, concerns in the realm extend to costs and competitiveness. Reuters had reported in December 2023 about Tata Motors opposing Tesla's proposal to lower import duties. It had argued, according to the report, lowering duties would 'vitiate' the investment climate which was premised around expectations of the tax regime favouring locals remaining unchanged. The automaker had further held that India's EV players required more government support in the early growth stage of the industry. According to IEA's EV Outlook, domestic OEMs accounted for more than 80% of the electric cars produced domestically in 2024. Additionally, it attributed a less than 15% share of Chinese imports in the country's EV sales in 2024 to high import duties on EVs and the availability of locally made, affordable electric models.
Thus, the lowering of duties prompt concerns about the potential impact (though not potentially from China) on domestic industries.
According to Mr. Abrol, the policy is premised around foreign-capital and is export-focussed. He suggested the policy should instead be oriented toward building local ecosystem and spurring research and development alongside innovation. Mr. Abrol holds the lack of availability of skilled persons is due to the missing contribution of the public sector. Mr. Chakraborty further states, by nature western technologies in general are more capital-intensive than those in labour-intensive economies. 'Even if it is export-oriented, it will create jobs in an area,' he states, adding, 'However, the overall context needs to be considered in terms of how many jobs it is displacing, this is also considering that EVs have less conventional parts than a gasoline-powered vehicle.'
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Mint
4 minutes ago
- Mint
E20 petrol is safe, says govt, amid engine damage, mileage concerns
New Delhi: The government on Tuesday sought to allay concerns over the 20% ethanol-blended petrol (E20) hurting mileage and damaging vehicle engines, saying that the fuel in fact gave better acceleration and improved ride quality. In a statement, the Union ministry of petroleum and natural gas said that vehicle owners do not find any issue related to drivability, metal compatibility and plastic compatibility while using E20 petrol. The ministry also rejected suggestions that E20 causes a 'drastic' reduction in fuel efficiency as "misplaced". "The use of E20 gives better acceleration, better ride quality and most importantly, lowered carbon emissions by approximately 30% as compared to E10 fuel. Ethanol's higher-octane number (108.5 compared to petrol's 84.4) makes Ethanol-blended fuels a valuable alternative for higher-octane requirements that is crucial for modern high-compression engines. Vehicles tuned for E20 deliver better acceleration, which is a very important factor in city driving conditions," the ministry said. Citing Brazil's experience with ethanol-blended fuel, it said that the south American nation has been successfully running on E27 for years with zero issues. The same automakers such as Toyota, Honda, Hyundai among others produce vehicles there too, the ministry said, adding that safety standards for E20 are well established through Bureau of Indian Standards specifications and Automotive Industry Standards. "In most parameters including drivability, startability, metal compatibility, plastic compatibility, there are no issues. Only in case of certain older vehicles, some rubber parts and gaskets may require replacement earlier than in case non-blended fuel was used. This replacement is inexpensive and can be easily managed during routine servicing. It may need to be done once in the lifetime of vehicle and is a simple process to be carried out at any authorized workshop," it said. Users have also complained, citing a NITI Aayog report, that ethanol-blended petrol should be cheaper than non-blended fuel, and that this cost advantage has not been passed on to the customers. The ministry said that in 2020-21, when the report of NITI Aayog was prepared, ethanol was cheaper than petrol. Over time, procurement price of ethanol has increased and now the weighted average price of ethanol is higher than the cost of refined petrol, the ministry said. "Currently, the average procurement cost of ethanol for Ethanol Supply Year 2024-25, as on 31.07.2025, is ₹ 71.32 per litre, inclusive of transportation and GST. For producing E20, OMCs (oil marketing companies) blend 20% of this procured ethanol with Motor Spirit (MS). Price of C-heavy molasses-based ethanol increased from ₹ 46.66 (ESY 2021-22) to ₹ 57.97 (ESY 2024-25)," the ministry said. "Price of Maize-based ethanol increased from ₹ 52.92 to ₹ 71.86 over the same period. Despite the increase in price of ethanol in comparison to petrol, the oil companies have not gone back on the ethanol blending mandate because the programme delivers on energy security, boosts farmers' incomes and environmental sustainability," it added. Describing the concerns as "totally baseless", the ministry said that usage of E20 fuel has no impact on the validity of insurance of vehicles in India. Automobile manufacturers continue to engage with vehicle owners to provide them any support that may be warranted to ensure optimum performance of vehicles, the ministry said. "For a vehicle owner, who believes that his/her vehicle may require further tuning or parts replacement, the entire network of authorized service stations are available to respond to such requests." Regarding moving beyond 20% ethanol blending, the ministry said that it would require careful calibration, for which extensive consultation are underway. This process has involved the same vehicle manufacturers that are already in Brazil as well as other manufacturers, entities involved in supply of feedstocks, R&D agencies, oil companies and ethanol producers. This process is yet to reach conclusion, it said. As per the current plan, the government is committed to using E20 petrol till October 2026. "Decisions for beyond 31.10.2026 will involve submission of the Report of the Inter Ministerial Committee, evaluation of its recommendations, stakeholder consultations and a considered decision of the government in this regard. That decision is yet to be taken," it said.


Economic Times
6 minutes ago
- Economic Times
Centre approves two semiconductor units for Odisha
Chief Minister Mohan Charan Majhi on Tuesday said the Union Cabinet's approval for the establishment of two semiconductor units in Odisha will accelerate the state's growth in the CM expressed his gratitude to Prime Minister Narendra Modi and Union minister Ashwini Vaishnaw for the Centre's approval of the two semiconductor units in Odisha. Opposition BJD, which had announced the Odisha Semiconductor Manufacturing and Fabless Policy 2023, said: "While other states were only announcing semiconductor units in 2024, the decision by the Union Cabinet to approve two such units in Odisha today is truly commendable." BJD senior vice-president Debi Prasad Mishra at a press conference here, expressed confidence that the state government will take proactive steps to develop the required supporting ecosystem for these units within the stipulated in the day, the Union Cabinet, chaired by Prime Minister Narendra Modi, approved four more semiconductor projects under India Semiconductor Mission (ISM), two of which will come to Odisha and one each for Punjab and Andhra Pradesh. After the Union Cabinet meeting, Vaishnaw said that a silicon carbide semiconductor plant will be set up in Bhubaneswar with an investment of Rs 2,066 crore by SiCsem. "Silicon carbide is a very robust material and can sustain at high temperatures. Silicon carbide is used in our missiles, satellites, telecom towers, rockets, railway engines, etc," Vaishnaw said. The minister said that the plant will have a capacity to produce 9.6 crore chips per Cabinet also approved US chip major Intel-backed 3D Glass semiconductor manufacturing unit in Odisha with an investment of Rs 1,943 crore. The plant will be set up by Heterogenous Integration Packaging Solutions Pvt Ltd with an annual production capacity of 5 crore units."I sincerely express my gratitude to Hon'ble Prime Minister Shri @narendramodi ji and Hon'ble Union Minister Shri @AshwiniVaishnaw ji for the Central Cabinet's approval of the establishment of two semiconductor manufacturing units in Odisha," Majhi said in a post on chief minister said the recent amendment of the Odisha Semiconductor Manufacturing and Fabless Policy, aimed at enhancing investment viability, competitiveness, and sustainability, together with this significant Cabinet approval, marks a major milestone in the state's industrial and technological advancement."This collaborative effort will accelerate innovation, generate employment, and strengthen Odisha's position as a vital contributor towards the vision of #AtmanirbharBharat. I look forward to continued partnership between the state and Central governments to further this strategic initiative for the comprehensive development of Odisha and the nation. #doubleengine," Majhi Private Limited is collaborating with Clas-SiC Wafer Fab Ltd, UK, to establish an integrated facility of Silicon Carbide (SiC) based Compound Semiconductors in Info Valley, Bhubaneshwar, project proposes to manufacture Silicon Carbide devices. This compound semiconductor fab will have an annual capacity of 60,000 wafers and packaging capacity of 96 million units. The proposed products will have applications in missiles, defence equipment, electric vehicles (EVs), railway, fast chargers, data centre racks, consumer appliances, and solar power inverters, an official statement said.3D Glass Solutions Inc (3DGS) will be setting up a vertically integrated advanced packaging and embedded glass substrate unit in Info Valley, Bhubaneshwar, Odisha. This unit will bring the world's most advanced packaging technology to India. Advanced packaging brings the next generation of efficiency to semiconductor industry, the statement facility will have a large variety of advanced technologies, including glass interposers with passives and silicon bridges, and 3D Heterogeneous Integration (3DHI) capacity of this unit will be approximately 69,600 glass panel substrates, 50 million assembled units, and 13,200 3DHI modules per annum. The proposed products will have significant applications in defence, high-performance computing, artificial intelligence, RF and automotive, photonics and co-packaged optics and leader Mishra said the process of setting up semiconductor units in Odisha was initiated under the leadership of former Chief Minister Naveen Patnaik during the BJD government. "The recent decision by the Union Cabinet to establish two semiconductor units in Odisha is rooted in the initiatives undertaken during the BJD regime," he said that investors interested in establishing a semiconductor industry in the state was cultivated during the 2nd edition of the Make in Odisha conclave held in December 2022, where several proposals were received. Accordingly, a dedicated policy for the semiconductor sector and its supporting ecosystem was formulated in 2023, he said. The BJD leader said that discussions were held with multiple international investors to attract investment in this sector, and efforts began to establish the necessary ecosystem to develop Odisha as a cutting-edge electronics manufacturing hub. Elevate your knowledge and leadership skills at a cost cheaper than your daily tea. As 50% US tariff looms, 6 key steps that can safeguard Indian economy As big fat Indian wedding slims to budget, Manyavar loses lustre Why are mid-cap stocks fizzling out? It's not just about Trump tariffs. The airport lounge war has begun — and DreamFolks is losing Stock Radar: UNO Minda eyeing fresh 52-week high in next few weeks; check target and stop loss for long positions Buy, Sell or Hold: Antique recommends buy on Siemens; Avendus upgrades SBI to Buy post June quarter results Stock picks of the week: 5 stocks with consistent score improvement and upside potential of up to 25% Weekly Top Picks: These stocks scored 10 on 10 on Stock Reports Plus


Time of India
6 minutes ago
- Time of India
Centre approves two semiconductor units for Odisha
Chief Minister Mohan Charan Majhi on Tuesday said the Union Cabinet 's approval for the establishment of two semiconductor units in Odisha will accelerate the state's growth in the CM expressed his gratitude to Prime Minister Narendra Modi and Union minister Ashwini Vaishnaw for the Centre's approval of the two semiconductor units in BJD, which had announced the Odisha Semiconductor Manufacturing and Fabless Policy 2023, said: "While other states were only announcing semiconductor units in 2024, the decision by the Union Cabinet to approve two such units in Odisha today is truly commendable."BJD senior vice-president Debi Prasad Mishra at a press conference here, expressed confidence that the state government will take proactive steps to develop the required supporting ecosystem for these units within the stipulated in the day, the Union Cabinet, chaired by Prime Minister Narendra Modi, approved four more semiconductor projects under India Semiconductor Mission (ISM), two of which will come to Odisha and one each for Punjab and Andhra the Union Cabinet meeting, Vaishnaw said that a silicon carbide semiconductor plant will be set up in Bhubaneswar with an investment of Rs 2,066 crore by SiCsem. Silicon carbide is a very robust material and can sustain at high temperatures. Silicon carbide is used in our missiles, satellites, telecom towers, rockets, railway engines, etc," Vaishnaw minister said that the plant will have a capacity to produce 9.6 crore chips per Cabinet also approved US chip major Intel-backed 3D Glass semiconductor manufacturing unit in Odisha with an investment of Rs 1,943 crore. The plant will be set up by Heterogenous Integration Packaging Solutions Pvt Ltd with an annual production capacity of 5 crore units."I sincerely express my gratitude to Hon'ble Prime Minister Shri @narendramodi ji and Hon'ble Union Minister Shri @AshwiniVaishnaw ji for the Central Cabinet's approval of the establishment of two semiconductor manufacturing units in Odisha," Majhi said in a post on chief minister said the recent amendment of the Odisha Semiconductor Manufacturing and Fabless Policy, aimed at enhancing investment viability, competitiveness, and sustainability, together with this significant Cabinet approval, marks a major milestone in the state's industrial and technological advancement."This collaborative effort will accelerate innovation, generate employment, and strengthen Odisha's position as a vital contributor towards the vision of #AtmanirbharBharat. I look forward to continued partnership between the state and Central governments to further this strategic initiative for the comprehensive development of Odisha and the nation. #doubleengine," Majhi Private Limited is collaborating with Clas-SiC Wafer Fab Ltd, UK, to establish an integrated facility of Silicon Carbide (SiC) based Compound Semiconductors in Info Valley, Bhubaneshwar, project proposes to manufacture Silicon Carbide devices. This compound semiconductor fab will have an annual capacity of 60,000 wafers and packaging capacity of 96 million units. The proposed products will have applications in missiles, defence equipment, electric vehicles (EVs), railway, fast chargers, data centre racks, consumer appliances, and solar power inverters, an official statement said.3D Glass Solutions Inc (3DGS) will be setting up a vertically integrated advanced packaging and embedded glass substrate unit in Info Valley, Bhubaneshwar, Odisha. This unit will bring the world's most advanced packaging technology to India. Advanced packaging brings the next generation of efficiency to semiconductor industry, the statement facility will have a large variety of advanced technologies, including glass interposers with passives and silicon bridges, and 3D Heterogeneous Integration (3DHI) capacity of this unit will be approximately 69,600 glass panel substrates, 50 million assembled units, and 13,200 3DHI modules per annum. The proposed products will have significant applications in defence, high-performance computing, artificial intelligence, RF and automotive, photonics and co-packaged optics and leader Mishra said the process of setting up semiconductor units in Odisha was initiated under the leadership of former Chief Minister Naveen Patnaik during the BJD government. "The recent decision by the Union Cabinet to establish two semiconductor units in Odisha is rooted in the initiatives undertaken during the BJD regime," he said that investors interested in establishing a semiconductor industry in the state was cultivated during the 2nd edition of the Make in Odisha conclave held in December 2022, where several proposals were received. Accordingly, a dedicated policy for the semiconductor sector and its supporting ecosystem was formulated in 2023, he BJD leader said that discussions were held with multiple international investors to attract investment in this sector, and efforts began to establish the necessary ecosystem to develop Odisha as a cutting-edge electronics manufacturing hub.