Indore Metro rolls out smoothly, thanks to IIT-Bombay's intervention
File Photo
MUMBAI: Indore celebrated a new chapter in urban commute on May 31 with PM Narendra Modi inaugurating a 6-km Metro line from Gandhi Nagar station to Super Corridor Station-3, but behind the smooth run of its first ride lies a quiet intervention from IIT-Bombay.
Rewind to 2022. The concrete was not set right. Initial pile foundation tests failed. Worry lines deepened. That's when Madhya Pradesh Metro Rail Corporation (MPMRCL) knocked on the doors of IIT-B, where steel met science.
"They reached out in Jan 2022 when MPMRCL authorities faced a problem with the initial pile foundation design and construction," recalled Prof Deepankar Choudhury, chair professor and former head of civil engineering at IIT-B.
Choudhury, who also shaped the foundation strategy for India's longest sea bridge
Atal Setu
, travelled to Indore with his then PhD students, Chaidul Chaudhuri and Vansittee Dilli Rao. What they found was sobering: In many piles, the concrete hadn't flowed fully to the bottom, with a shortfall in lengths. Gaps as large as two metres stared back, posing a serious risk to the entire metro superstructure.
"Anything built over such uncertainty was a hazard," Choudhury said. "We proposed supplementary piles and redesigned the pile cap with detailed finite element analysis, considering customised location-specific ground conditions," Choudhury explained. The compromised piles were repurposed as auxiliary supports, their strength recalibrated by a new configuration. That is the mind beneath Indore's Metro.
These findings were recently published in a leading journal of the American Society of Civil Engineers, International Journal of Geomechanics, by Choudhury and his former PhD scholars of IIT-B.
Get the latest lifestyle updates on Times of India, along with
Eid wishes
,
messages
, and
quotes
!
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Hindustan Times
32 minutes ago
- Hindustan Times
Who is Madhavi Latha? Meet the IISc professor behind the world's tallest Chenab Bridge in Kashmir
When India's most audacious railway project, the Chenab Bridge in Jammu & Kashmir, was inaugurated by Prime Minister Narendra Modi on Friday, the spotlight turned not just to the world's tallest railway arch, but also to one of its key behind-the-scenes minds, Prof G Madhavi Latha from the Indian Institute of Science (IISc), Bengaluru. Deccan Herald reported that for nearly two decades, Prof Latha, a rock engineering expert from IISc's Civil Engineering Department, played a pivotal advisory role in the design and construction of the ₹1,486-crore Chenab Bridge, an engineering feat that now connects the Kashmir Valley to the rest of the country by rail. Rising 359 metres above the riverbed, the bridge towers taller than the Eiffel Tower and spans 1,315 metres across the rugged Himalayan terrain. Her contribution, as reported by Deccan Herald, involved guiding the stability of the slopes and the design of bridge foundations, a critical aspect in one of India's most geologically challenging zones. Latha was roped in by Northern Railways and the project contractor Afcons in 2005, as part of IISc's long-term consulting support for the project. (Also Read: PM Modi inaugurates world's highest railway bridge over Chenab river in J&K) Unlike traditional construction methods, the team adopted a 'design-as-you-go' approach. 'We had to constantly adapt, because the initial geological data didn't match the reality of the rock conditions when we began excavation,' Latha told DH. Initially, another IISc faculty member worked with her on the project, but when he stepped away after a few years, Latha took over the responsibility through to completion in 2022, when full-speed train trials began. On social media, IISc acknowledged the milestone. 'We are proud of Prof Madhavi Latha & her team's contribution to the #ChenabBridge,' the institute posted on X, noting their work on slope stability, rock anchors, and foundational design to withstand geological hazards. (Also Read: Steep slopes, location access: How Chenab railway project team tackled construction challenges?)
Time of India
8 hours ago
- Time of India
Maha's anti-venom pioneer targeted by predatory journal
Mumbai: The world of medical research is battling its own version of cyber frauds: predatory or 'pseudo' journals, deceptive publications that claim to be scholarly but rarely follow ethical publishing practices and seek hefty payment from authors. On Friday, Dr Himmatrao Bawaskar (75), a Mahad-based physician who won a Padma Shri in 2022 and is known for his rural Maharashtra medical practice and research, wrote in 'The Lancet' about his two-year struggle with a predatory journal that swiftly published his work, then started demanding 1,000 pounds and issued threats when he objected. "I received threatening emails stating they would take serious action and damage my reputation in India," he said. Mahad-based Dr Himmatrao Bawaskar, whose pioneering work in anti-venom for scorpions and snakes has been published in numerous peer-reviewed medical journals, was so "devastated" by his struggle with a predatory journal that he developed "anxiety, insomnia and palpitation". Within six months, the 75-year-old doctor lost 8 kgs and needed psychiatric help. In recent months, various medical associations across the world have voiced concern about the growing number of predatory journals. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Tausende schwärmen von diesem Nagelpilz-Gerät – wir haben es überprüft Med-Aktuell Undo The International Committee of Medical Journal Editors in Feb estimated there are over 15,000 such journals. While medical research paves the way for new treatments, these journals are undermining its credibility. Dr Bawaskar's ordeal began when he submitted his self-funded diabetes research to high-impact journals. After many rejections, a case report journal approached him. "In my submission to this journal, I stated I work without funding and would not be able to pay fees," he said. Yet the journal sent him a proof in a couple of days. "I was shocked—how could the peer review and publication process be completed so quickly? I again appealed, stating my inability to pay. The journal ignored my requests and proceeded to publish the article, then sent me an invoice with exorbitant fee," he added. The journal then sent threats and said they were giving him "a 40% discount." "But during a call with my son who is a cardiologist in the US, my wife mentioned my stress to him," said the doctor. His son identified the predatory nature of the journal and blocked their communications. While the doctor hasn't paid the journal, this experience has prompted him to work out a checklist. He said, "Since this episode, I have not attempted to publish again. Instead, I find fulfilment in seeing my patients recover and walk again—living testaments to my diagnosis and management; these are my true publications." Get the latest lifestyle updates on Times of India, along with Eid wishes , messages , and quotes !
Indian Express
8 hours ago
- Indian Express
Magnitude of bridge hits when you see it in real: IISc expert
They say one cannot erect a great building on a weak foundation. And definitely not, when it's the world's highest railway bridge — now a distinction given to the Chenab Railway Bridge — inaugurated by Prime Minister Narendra Modi on Friday. The Chenab bridge remains one of the highest points in the career of Madhavi Latha G, a professor of civil engineering at Indian Institute of Science (IISc), Bengaluru. Latha worked on the project for 17 years — from 2005, shortly after joining IISc, to 2022, when she took her family to the site to have a look at the almost-completed bridge. 'Working on this project has been an experience of a lifetime,' Latha, 54, told The Indian Express. A civil engineering graduate from Jawaharlal Nehru Technological University in Kakinada, Latha went on to pursue her MTech from NIT Warangal and a PhD from IIT Madras, before landing a job as assistant professor at IIT Guwahati in 2003. After a year, she moved to IISc, where she got assigned to this project. The Chenab Railway Bridge is a steel-and-concrete structure extending 1,315 m across the river gorge. It consists of a 530-metre-long approach bridge and a 785-metre-long deck arch bridge (the part on which vehicles ply). The steel structure can endure extreme weather conditions, including temperatures as low as -20 degrees Celsius. It can also withstand wind speed of 220 km/hr, which is equivalent to winds associated with a super cyclone. The region falls under seismic zone IV and the proposed bridge had to have the ability to withstand earthquakes of magnitude up to 8 on the Richter scale. Young mountains with rocky and steep slopes, fractures and joints meant that the civil engineers had to first prepare the ground so that the strong foundation could be laid. 'The region is geotechnically and geologically challenging and close to the boundary where the Himalayas started forming,' Latha said. As the joints were found dipping towards the valley, the possibility of potential rock slides and slope slides were high, so her design was to fix these from sliding. 'Any slope is standing against gravity and it will always be vulnerable to slide off. This is the major instability in such terrains. Mountain formation is an outcome of tectonic activities and since these mountains are still young and continuously evolving, there are inherent discontinuities, joints, separations,' she said, describing the site where the bridge now stands. Stitching together loose rock fragments, fixing slopes into the deep Chenab valley and stabilising the ground in a highly active seismic zone to lay the bridge's foundation was the task at her hand. She was primarily responsible for designing protection for the bridge's foundation. 'While designing, we had to consider the many joints present within the slopes which posed a threat of making the ground unstable, in particular if there was seismic activity. In order to make the bridge quake-resistant, we had to first stabilise these slopes where I was intensely involved,' Madhavi Latha said. 'To stabilise the slope we used cement grouts, so that loose rock fragments, if any, could be bonded together. In addition, we used steel rock anchors to stitch all these joints and connect these fragments,' she explained. Madhavi Latha said at one point her professional skills were required nearly 24×7, giving her no time to rest or sleep. 'At a particular slope cutting, I remember spending sleepless nights as my inputs were required at every stage. Ferrying people and machinery to such altitudes makes the everyday work very expensive,' she said. Her last visit to the site with family in 2022 was a big revelation. 'Images cannot do justice, the magnitude of the bridge hits when one sees it in real,' she said.
