
The electric Range Rover is almost here! But we've already taken it off road...
And as far as offroading goes; Eastnor's tracks were mostly dry on the day of our test, so didn't present the challenge to this car's outright traction and torque-vectoring capacities that they might have on a soggy December afternoon. But a cakewalk, they certainly ain't. In places they climb and descend slippery gradients of more than 25 degrees, as well as twisting and turning around gulleys, and over rocks and ridges.
And yet the unflappable calmness with which the Range Rover Electric can simply ease itself up, down, over and around everything before it inspires incredible confidence in its capabilities.
Nothing seems to phase it. Nothing requires the merest run up, or suck-it-and-see hurried stab of power. It sniffs out traction bit by bit, like a mountain goatherd who's rehearsed every step; and without any need to worry about keeping engine revs from bogging down, momentum from dying, or wheels from spinning away fruitlessly.
Without an asymmetrical motor layout, the car vectors torque in offroad situations via open diffs and brake interventions, using specially developed Terrain Response traction control software adapted for the torque of electric motors. 'We can control a slipping wheel about a hundred times faster than in the standard car,' says Fairbrother.
The difference that makes to the Range Rover's offroad capability is remarkable; and, in tandem with an apparent dearth of effort expended in what it's doing caused by the lack of any revving engine, it makes for an air of assurance that suits a Range Rover quite brilliantly.
As well as being superbly quiet and calm when running on asphalt, there's a serene composure about this car even at the toughest of moments. So accessible is the car's torque, and so fine and effective its electronic governance, that you seldom need more than 40- or 50 per cent throttle to ease gently over the biggest roots, or out of deep ruts. The loudest noises you'll hear will likely be water sloshing past the wheels, gravel crunching under the tyres, and the background hum of the air conditioning.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Reuters
13 minutes ago
- Reuters
Nissan begins talks with union to cut jobs at European regional office
TOKYO, Aug 5 (Reuters) - Nissan Motor (7201.T), opens new tab has begun negotiations with the union representing staff at its European regional office about changes that will include job losses, according to a company document and internal emails. The struggling Japanese automaker, which has embarked on a major restructuring, confirmed it has entered consultations with staff representatives at Nissan Automotive Europe, its regional office in Montigny-le-Bretonneux, France, which has around 560 staff. The office, which also oversees Nissan's operations for Africa, the Middle East, India and Oceania, is set to undergo major changes, according to a person with knowledge of the issue who declined to be identified. Management and the union agreed to discuss voluntary redundancies before any forced layoffs, the document seen by Reuters showed. Talks are expected to conclude by October 20, with full details to be shared with staff in November, the document and the emails said. "We are working diligently and respectfully with all parties to ensure that this process is conducted with care, transparency and in full compliance with legal requirements," Massimiliano Messina, Nissan's vice chairperson for the region, said in a July 31 email. Messina also said in the email that no decisions had yet been made. After taking the helm in April, CEO Ivan Espinosa announced a sweeping restructuring that includes cutting about 15% of Nissan's workforce, slashing global production capacity by nearly 30% to 2.5 million vehicles and the number of its manufacturing sites to 10 from 17. The automaker, which has seen weak sales in China and the U.S. compound pain brought on from an expansionist strategy, hopes to save 500 billion yen ($3.4 billion) with the restructuring. In recent developments, Nissan said last week it would stop output at its Civac plant in Mexico by March next year. It also said it will end car production at its Oppama plant in Japan by March 2028 and at Nissan-Shatai's (7222.T), opens new tab Shonan factory by March 2027. The automaker employs nearly 19,000 people across Europe, Africa, the Middle East, India and Oceania, with close to 60% based in Europe, according to a diversity report published in October 2024. ($1 = 147.6400 yen)


Auto Car
14 minutes ago
- Auto Car
The BMW iX3 is about to make a BIG comeback
An 800V electrical architecture will mean the iX3's battery will also be able to charge at up to 400kW, enabling a 218-mile top-up in just 10 minutes from suitable chargers. Two powertrains will be available when the iX3 arrives in the UK early next year: a single-motor, rear-wheel-drive one and a dual-motor, four-wheel drive one that can deliver up to 402bhp. The second-generation iX3 also receives a new computing system that is 10 times faster than the network of chips in current BMWs. In addition, to maximise interior space within this set-up and to keep vehicle height as low as possible to aid aerodynamics, BMW will unusually bolt the front seats directly to the pack – another first for the firm. Visually, the new iX3 will draw on the original Neue Klasse models from the 1960s and return to small kidney grilles rather than the bolder, more expansive front ends that adorn the likes of the iX. The double-kidney grille will divide a large, gloss black panel on the iX3's front end – similar in style to the Vizor found on Vauxhalls. The panel is likely to conceal the sensors and cameras required by the latest generation of driver assistance systems. The rest of the car will feature a boxier, more chiselled look than today's models, with angled lights front and rear, plus a rear light bar. The reinvention continues inside the iX3, which will be the fi rst car to employ BMW's new iDrive X system.


Reuters
15 minutes ago
- Reuters
Continental Q2 tyre margins hit by tariffs, currency headwinds
Aug 5 (Reuters) - German car parts supplier Continental ( opens new tab reported a slightly lower than expected second-quarter profit margin at its core tyres business on Tuesday, citing headwinds related to U.S. import tariffs and foreign exchange rates. The company said its adjusted earnings before interest and taxes (EBIT) margin rose 12% in the April-June period, down from 14.7% a year ago, compared to a company-compiled consensus of 12.5%. In June, the firm cut its profitability targets for both its core tyre business and the broader group. Continental is in the process of splitting off two of its three businesses, seeking to reposition itself as a pure-play tyre maker that it hopes will leave it better placed to handle a volatile market rattled by tariffs imposed by the United States. The automotive division generated profit margin of 4%, higher than 3.8% expected by analysts, thanks to cost-cutting measures and sustained price adjustments, the company said, adding it showed a positive momentum ahead of its listing on stock exchange on September 18. "We've worked hard to make our group sectors more resilient and more agile," CEO Nikolai Setzer said in a statement.