
Scientists make shocking discovery 1,700 MILES beneath Earth's surface
Scientists have made a shocking discovery, 1,700 miles (2,700km) beneath the surface of our planet.
A team from ETH Zurich has discovered solid rock flowing deep within Earth.
The strange rocky current is neither liquid like molten magma nor solid like the brittle rock we might see at the surface.
This is the first confirmation of scientists' suspicions that rock in the depths of the planet moves on convection currents like water in a boiling pot.
'Our discovery shows that the Earth is not only active on the surface, but is also in motion deep inside,' said lead author Professor Motohiko Murakami.
Confirming this theory now allows scientists to begin mapping the hidden currents of solid rock deep within the planet.
That might one day explain the invisible motor which drive s volcanoes, earthquakes, tectonic plates, and even the Earth's magnetic field.
Professor Murakami added: 'We have finally found the last piece of the puzzle.'
Five layers of Earth
Crust: To a depth of up to 43 miles (70km), this is the outermost layer of the Earth, covering both ocean and land areas.
Mantle: Going down to 1,795 miles (2,890km) with the lower mantle, this is the planet's thickest layer and made of silicate rocks richer in iron and magnesium than the crust overhead.
Outer core: Running to a depth of 3,200 miles (5,150km), this region is made of liquid iron and nickel with trace lighter elements.
Inner core: Going down to a depth of 3,958 miles (6,370km) at the very centre of Earth, this region is thought to be made of solid iron and nickel.
Innermost core: Within the inner core, this region is solid iron in a different, but unknown structure to the inner core.
Scientists divide the Earth into three main layers: the crust, the mantle, and the core.
The striking discovery came from an investigation into a strange area of the mantle known as the D' layer.
When the seismic waves from earthquakes hit this layer, they suddenly speed up as if they have entered a different type of material.
Previously, Professor Murakami discovered that perovskite, the material which makes up most of the lower mantle, transforms into a new mineral around the D' layer.
Under extreme pressure and heat, perovskite becomes post-perovskite, which Professor Murakami thought might account for the sudden change in seismic waves' behaviour.
But it soon became apparent that this alone was not enough to explain why earthquake waves accelerated so much 1,700 miles beneath the surface.
The researcher's breakthrough was discovering that the hardness of post-perovskite depends on how its crystals are aligned.
Professor Murakami told MailOnline: 'Post-perovskite has an unusual property: it is extremely hard in only one specific crystallographic direction.'
Since seismic waves travel faster through harder materials, this would explain why earthquake waves suddenly become so fast only in one specific region.
In an extremely unusual experiment, Professor Murakami decided to recreate the conditions found nearly 2,000 miles beneath the Earth's surface to see how this could happen.
Professor Murakami told MailOnline: 'By sandwiching a very small sample between the tips of two single-crystal diamonds with sharply pointed ends, it is possible to generate extremely high pressures.
'And through the transparent diamond windows, we can directly observe the sample under high pressure.'
Tiny grains of perovskite were crushed at pressures up to 115 gigapascals, over 16 million pounds per square inch, to recreate the conditions of the D' layer.
Under extreme heat and pressure, crystals in the post-perovskite would line up to face in the same direction.
Testing revealed that only this specific alignment was hard enough to produce the same seismic acceleration the scientists had been looking for.
That meant there must be something happening around the D' layer which forces all of the mineral crystals to point in the same direction.
According to the researchers, this could only be caused by the solid rock flowing horizontally along the boundary between the Earth's mantle and the core.
So, when the rock is moving steadily in one direction, all the crystals are forced to point the same way and the post-perovskite becomes much harder.
That means that the D' layer is actually a vast underground current of super-hard rock 1,700 miles beneath the surface.
Professor Mukami says: 'The mantle is solid, but it moves at a very slow speed—only a few centimetres per year. This movement is called mantle convection.
'Even though the mantle is solid, it can flow like a liquid over long periods of time if it has a certain viscosity.
'On the timescale of 4.6 billion years, even a few centimetres per year adds up to an enormous amount of movement.'
The Earth is moving under our feet: Tectonic plates move through the mantle and produce Earthquakes as they scrape against each other
Tectonic plates are composed of Earth's crust and the uppermost portion of the mantle.
Below is the asthenosphere: the warm, viscous conveyor belt of rock on which tectonic plates ride.
Earthquakes typically occur at the boundaries of tectonic plates, where one plate dips below another, thrusts another upward, or where plate edges scrape alongside each other.
Earthquakes rarely occur in the middle of plates, but they can happen when ancient faults or rifts far below the surface reactivate.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Sky News
an hour ago
- Sky News
Artificial solar eclipse created by 'driverless' spacecraft in world first
Two "driverless" spacecraft have flown in perfect formation to create a small artificial solar eclipse and "achieve what no other mission has before", the European Space Agency (ESA) has said. The synchronised flight orbiting Earth allowed one of the satellites to cast an 8cm-wide shadow onto its sister craft, flying 150 metres away, by blocking its view from space of the sun's surface. The technique helped the space agency to capture detailed images of the sun's fiery outer atmosphere, called the corona. Scientists increasingly need to study the corona, but find it hard to do so without an eclipse because the sun's surface is one million times brighter. Solar wind, the flow of matter from the sun to outer space, and coronal mass ejections, the eruptions of plasma from the sun, can both interfere with modern technology like satellites – as well as cause displays of the Northern and Southern Lights. It is hoped that studying the corona more closely will help scientists better understand solar weather, as well as answer questions about the sun itself. The images from the Proba-3 mission were taken in March but have only been released by the space agency this week. "We can create our eclipse once every 19.6-hour orbit, while total solar eclipses only occur naturally around once, very rarely twice a year," said Andrei Zhukov from the Royal Observatory of Belgium. "On top of that, natural total eclipses only last a few minutes, while Proba-3 can hold its artificial eclipse for up to six hours." The two satellites are able to align with the sun so that the 1.4-metre disc carried by one of the spacecraft, the Occulter, covers the bright disc of the sun and casts a shadow. The other spacecraft, the Coronagraph, then takes a series of photographs with different exposure times. The satellites flew within 150 metres of each other, with a precision "equal to the thickness of the average fingernail", according to the ESA. Rather than relying on human drivers, who would have an "uncomfortable" delay of a fifth of a second while steering, the spacecraft autonomously lined themselves up with the sun in a manner "akin to driverless cars", the space agency said. When the spacecraft blasted off in December last year, they had enough fuel to keep going for around two years. After five years, it is expected they will burn up in the Earth's atmosphere.


BBC News
an hour ago
- BBC News
World's largest digital camera about to release first photos
The first photos from the largest digital camera in the world are about to be revealed and we are expecting some out-of-this-world Legacy Survey of Space and Time (LSST) camera was built to capture ground-breaking photos of week - on Monday, 23 June - some of these observations will be revealed to the world for the first time. According to the Guinness Book of Records the LSST is not only the largest digital camera, but also the one with the highest resolution which means it can take really detailed top-of-the-range phones have cameras with a resolution of up to 50 megapixels, whereas the LSST has a resolution of 3,200 megapixels!But you definitely can't carry this camera around with you, it's about the same size as a small car and weighs a massive 2, it is kept at the Vera C Rubin Observatory in Chile attached to a powerful images it will take are so large that it would take 400 ultra-high-definition televisions to display one of them at full size. The camera aims to capture 1,000 images a night over the next 10 years and the project's mission is to catalogue 20 billion goal is to capture an ultra-wide and ultra-high-definition time-lapse record of our US National Science Foundation and Department of Energy say the images captured will help scientists answer questions about dark matter, the structure of the Milky Way and the formation of our Solar System."No other telescope has been able to detect both real-time changes in the sky and faint or distant objects at the same time on this enormous scale. "These capabilities mean that exceedingly rare events in the sky, never detected before, will be captured for the first time."The first spectacular images are to be unveiled on 23 June at 11am in the US, which is 4pm in the 'First Look' event is set to be live-streamed on YouTube for any astronomy enthusiasts.


Daily Mail
2 hours ago
- Daily Mail
Mysterious 'Jellyfish UFO' spotted over US desert as scientists reveal its origin
A strange jellyfish-like phenomenon was spotted streaking across the California sky Monday night. While the unusual ' UFO ' sighting baffled many locals from the Mojave desert to Los Angeles 's South Bay, scientists say there were no extraterrestrials involved in creating the jellyfish - it was an Elon Musk rocket. SpaceX 's latest Falcon 9 rocket mission lifted off at 11:36pm ET Monday night from Vandenberg Space Force Station in California. A few minutes into the flight, the rocket's exhaust interacted with the atmosphere, creating a visible cloud of condensed water vapor. Since the launch took place right after sunset, around 8:36pm PT, the sun illuminated the crystalized exhaust plume, resulting in a spectacular sight for millions on the ground. Californians posted images of the rocket soaring over the state on X, even as far south as Riverside, over 200 miles southeast of the Vandenberg launch site. SpaceX's lead avionics systems engineer, Cameron Gable, captured the jellyfish phenomenon as the rocket traveled past Los Angeles County's South Bay. The mission, dubbed Starlink 15-9, saw SpaceX launch its latest batch of Starlink satellites into low Earth orbit. The jellyfish phenomenon, also known as a 'vapor cone' or 'shock collar,' occurs when the localized air pressure around the rocket drops, causing the air temperature to decrease and water vapor to condense into visible clouds. Monday's giant jellyfish display started just a few minutes into the flight and was visible to anyone in the Southern California area. It's not the first time a SpaceX rocket has produced the jellyfish effect. In October 2022, sky watchers caught another Falcon 9 rocket creating the same vapor trail during a similar mission to deploy new satellites. Monday's Falcon 9 launch was the latest mission in SpaceX's ongoing efforts to expand its Starlink 'constellation,' aiming to enhance global internet coverage. SpaceX has already conducted 75 launches in 2025, mainly for Starlink missions. The mission also used a reusable first-stage engine, a hallmark of SpaceX's design philosophy aimed at reducing the cost of spaceflights. SpaceX captured the moment on their live broadcast when the reusable engine safely landed back on Earth to be used again in future missions. Monday's mission was the 200th from the company's Space Launch Complex 4 East at Vandenberg. The jellyfish effect is a common occurrence during space rocket launches and can normally be seen from states hundreds of miles from the actual launch site The remote-controlled reusable rocket engine made a perfect touchdown on SpaceX's droneship in the Pacific Ocean about eight minutes after launch, making it the 463rd engine returned to Earth. While the jellyfish effect may seem like a bizarre UFO to the untrained eye, it's common among spaceflights. Social media users regularly capture rockets giving off the jellyfish trail from hundreds of miles away. One X user in Phoenix, Arizona, was able to spot a similar jellyfish during a June 2024 launch. That mission also involved a Falcon 9 launching from Vandenberg, which was over 500 miles away. When a rocket launches, it expels a large amount of exhaust gases at high speeds. These gases, primarily composed of water vapor, carbon dioxide, and other rocket launch byproducts, expand rapidly as they exit the rocket's nozzle. As the exhaust plume expands, it encounters cooler, denser air in Earth's upper atmosphere. This can cause the water vapor in the exhaust to condense into visible clouds, forming a balloon-like shape around the rocket. The high speed of the rocket can also create shock waves, further shaping the exhaust into distinctive patterns, creating the jellyfish effect. SpaceX's Falcon 9 rockets, with their frequent launch schedule and reusable first stages, often trigger this effect due to their design and the typical launch times chosen for optimal visibility. However, any rocket launch around the world can potentially give off a jellyfish trail, especially when the conditions are right for the exhaust to give off a dramatic display in the atmosphere.