
Dyson Airwrap vs. Shark FlexFusion: I Put Them Both to the Test on My Long, Thick, Wavy Hair
When it comes to high-tech hair tools, few names get thrown around as much as the Dyson AirWrap. It's sleek, well-designed and yes, expensive. But in recent years, a new, more affordable contender has stepped into the spotlight: the Shark FlexFusion. Both brands promise salon-quality results at home with less heat damage.
After testing both hair styling tools for a few weeks, I found that while they promise similar results, each works best for different hair types. For the purpose of this article, I parted my hair down the middle and styled one half with the Dyson Airwrap and the other half with the Shark FlexFusion. I wore the results all day, tested for hold and volume, and noted how each side held up by the next morning.
How these hair tools work
At first glance, the Dyson Airwrap and Shark FlexFusion seem to promise the same results. Both are multi-styling tools that dry, curl, volumize and smooth hair using fast airflow instead of extreme heat. Both styling tools use what's known as the Coanda effect, a technique where air follows the natural curve of a surface. It's what allows your hair to wrap around the barrel without spinning parts or clamps.
Dyson vs. Shark: Comparison table
undefined Feature Dyson Airwrap Shark FlexFusion Price $599 $349 Attachments included 6 4 Heat settings 2 heat settings + cool shot 3 heat settings + cool shot Technology Coanda effect Coanda effect Cord length 8.5 ft 8.0 ft Hair types supported Mostly for fine to medium hair thicknesses Works well on all hair types, including thick and curly
First test: Straightening my hair with both tools
To compare them fairly, I did a true side-by-side test. I parted my hair down the middle and straightened one half with the Dyson Smoothing Brush and the other half with the Shark Fusion Brush, both tools set at the highest heat setting.
The Shark smoothed out my roots a lot better than the Dyson. It took longer to straighten my hair with the Dyson because I had to do more passes near my scalp, and it still didn't tame the volume as well as the Shark. On the ends, the Shark also gave a sleeker, more polished finish. I expected the Dyson to do a better job, but the Shark brush is designed to give you a more blowout look and the Dyson smoothing brush is more for strict straightening. The Shark definitely gripped my thick waves more firmly and shaped them with better tension.
I do have to make a note of the noise levels, though. The Shark is much noisier than the Dyson. At times, I felt the need to use earplugs when styling near my ears with the Shark. The Dyson tool performed pretty quietly.
This is what my hair looks like naturally, air-dried with no products before styling with the tools.
Nasha Addarich Martínez
Dyson side:
The bristles on the smoothing brush move from side to side, which avoids pulling on hair and prevents breakage. This gentle movement made my hair feel extra soft.
It didn't grip my hair as firmly as I would have liked, leaving visible waves near the roots. If your roots are straight, this won't be an issue. But with deep waves, curls or coils, you may need several passes or a round brush to fully straighten them.
The ends were fine but lacked definition and style.
Shark side:
The Fusion brush gripped my hair better and provided more tension, giving the roots and ends a sleeker look. Because of this, I had to do fewer passes, and it cut my drying time by around 10 minutes compared to the Dyson.
The airflow felt stronger, which also contributed to faster drying time.
Overall, the end result with the Shark looked like a professional blowout.
Verdict: For this part of the test, Shark was the obvious winner for my long, thick hair. Shark's half looked better styled (as if I had it professionally done), without the heat damage. However, if you have fine hair with less texture, the Dyson should give you great results.
Left image: Left side styled with the Dyson. Right side styled with the Shark.
Right Image: Left side styled with the Shark. Right side styled with the Dyson.
Nasha Addarich Martínez/CNET
Second test: Using the curling rods
After straightening both sides of my hair with the smoothing and Fusion brushes, I tested each tool's curling attachments. I used the Dyson Airwrap conical curling barrel on one side -- the thinner barrel, not the thicker one that gives more of a blowout look. This was the side I had blow-dried with the smoothing brush. On the other side, which I dried with the Fusion brush, I used the Shark FlexFusion curling rod. Both tools have dry or damp settings, so I used them both on the highest setting for dry hair.
Right off the bat, the Dyson earns brownie points for its single reversible curling barrel. It makes switching curl directions easier -- just twist the top of the barrel. The older Airwrap version required two separate barrels to curl in different directions.
The Shark FlexFusion uses two separate curling rods, each marked with arrows to indicate airflow direction. That makes the Dyson more convenient -- you only need one barrel, not two rods, and it's quicker to use. With the Shark, you have to swap rods to style each side of your head, and you often have to wait for them to cool down first. I frequently found them too hot to handle.
Dyson side:
This side of my hair had tighter, more defined curls
Curl direction was easier to control because of the single-barrel switch option
The airflow and barrels felt a lot more gentle on my strands, with less pulling and tugging (better for fine to medium hair)
Curls were a lot more structured and classic, which I find more appropriate for formal styles or long wear
The Dyson also comes with two curling barrel sizes, 1.2-inch and 1.6-inch, so you can decide if you want tighter or looser curls. My experience with the larger barrel is that it doesn't give you a lasting curl look but rather a more blowout wave.
Shark side:
Gave looser, bouncier curls with more movement
The airflow felt stronger, so I had to spend less time curling my hair
The rods and airflow had a better grip on my hair (better for thick or textured hair)
Curls had a softer, more lived-in texture, which I find better for casual looks
Verdict: If you want precision, and convenience or have fine to medium hair, the Dyson is the best choice. On the other hand, if you want more relaxed curls and bounce and have thick or textured hair, the Shark is the better choice.
Left image: Left curled with the Dyson and right side curled with the Shark.
Right image: Left curled with the Shark and right side curled with the Dyson.
Nasha Addarich Martínez/CNET
Dyson Airwrap vs. Shark FlexFusion: Other attachments included
The most popular tools used for both the Shark and Dyson are the curling and straightening attachments, but both brands offer additional attachments to add versatility to your routine. Here's a breakdown of what tools each one offers:
Dyson Airwrap attachments
Conical Airwrap barrel (for tighter curls)
1.6-inch Airwrap long barrel (for looser curls)
Dryer and flyaway smoother
Fast dryer
Large, round volumizing brush
Soft smoothing brush
Takeaway: Dyson gives you more customization attachments that cater to precision styling and polished results. The Flyaway attachment really stands out for polishing frizzy hair.
Dyson Airwrap attachments
Nasha Addarich Martínez/CNET
Shark FlexFusion attachments
The Shark FlexFusion is a build-your-own bundle that comes with a Fusion brush and ceramic straightener (like a flatiron), and your choice of two other attachments. For mine, I chose the curling rods and the styling concentrator so I can also use it as a handheld hair dryer. You can choose two of the following:
1.25" auto-wrap curlers
Oval brush
Curl defining diffuser
Frizz fighter finishing tool
Wide-tooth comb
Styling concentrator
Takeaway: Shark prioritizes efficiency, as you can choose the tools you'll actually use. You'll get the essentials for your styling needs, so it's less about endless combinations and more about practicality.
Shark FlexFusion attachments
Nasha Addarich Martínez/CNET
Which one is best: the Dyson Airwrap or Shark FlexFusion?
As a person of color with thick and textured hair, I know all too well that most hair care tools are built with finer hair in mind. I think both of these tools can work for all types of hair, with some caveats.
The Dyson Airwrap feels and looks more premium, but you'll need to section and style smaller pieces of hair and it'll require more passes (and more time) to get polished results on thick hair (even on the highest setting). For fine hair, you can probably get away with larger sections.
The Shark handles my volume effortlessly and gives a sleeker look to my roots and ends. I think that the highest setting may be too strong for fine hair, so it's best to use a more gentle setting to avoid breakage.
Dyson Airwrap pros and cons
Pros:
Luxurious feel and design
Great for tighter curls and soft blowouts
Lower heat, which makes it safer for daily use
Cons:
Struggles with thick or curly roots
Pricey
Takes more time for dense hair
Nasha Addarich Martínez/CNET
Shark pros and cons
Pros:
Better tension and grip for thick, wavy or curly hair
Smoother results for roots and ends
Faster styling
More affordable
Cons:
Curling rods require you to switch them out for different airflow directions
Louder airflow than the Dyson
Nasha Addarich Martínez/CNET
Final verdict
If you have long, thick, curly or wavy hair like me, the Shark FlexFusion may be the best option for you. It delivers faster results, smooths both roots and ends more effectively -- and does it all for a fraction of the price of the Dyson Airwrap.
That said, Dyson is a leader in the hair care world for good reason. If you want more polished curls, love the luxurious experience, are a fan of the Dyson name or have fine to medium hair, it's definitely worth the splurge.
If we're looking objectively at performance alone, especially a tool that'll work well on all hair types, the Shark FlexFusion is really impressive.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


CBS News
31 minutes ago
- CBS News
UC Davis breakthrough lets ALS patient speak using only his thoughts
Allowing people with disabilities to talk by just thinking about a word, that's what UC Davis researchers hope to accomplish with new cutting-edge technology. It can be a breakthrough for people with ALS and other nonverbal conditions. One UC Davis Health patient has been diagnosed with ALS, a neurological disease that makes it impossible to speak out loud. Scientists have now directly wired his brain into a computer, allowing him to speak through it using only his thoughts. "It has been very exciting to see the system work," said Maitreyee Wairagkar, a UC Davis neuroprosthetics lab project scientist. The technology involves surgically implanting small electrodes. Artificial intelligence can then translate the neural activity into words. UC Davis researchers say it took the patient, who's not being publicly named, very little time to learn the technology. "Within 30 minutes, he was able to use this system to speak with a restricted vocabulary," Wairagkar said. It takes just milliseconds for brain waves to be interpreted by the computer, making it possible to hold a real-time conversation. "[The patient] has said that the voice that is synthesized with the system sounds like his own voice and that makes him happy," Wairagkar said. And it's not just words. The technology can even be used to sing. "These are just very simple melodies that we designed to see whether the system can capture his intention to change the pitch," Wairagkar said. Previously, ALS patients would use muscle or eye movements to type on a computer and generate a synthesized voice. That's how physicist Stephen Hawking, who also had ALS, was able to slowly speak. This new technology is faster but has only been used on one patient so far. Now, there's hope that these microchip implants could one day help other people with spinal cord and brain stem injuries. "There are millions of people around the world who live with speech disabilities," Wairagkar said. The UC Davis scientific study was just published in the journal "Nature," and researchers are looking for other volunteers to participate in the program.


Forbes
an hour ago
- Forbes
HBM And Emerging Memory Technologies Enable AI Training And Inference
AI During congressional hearing in the House of Representatives' Energy & Commerce Committee Subcommittee of Communication and Technology, Ronnie Vasishta, Senior VP of telecom at Nvidia said that mobile networks will be called upon to support a new kind of traffic—AI traffic. This AI traffic includes the delivery of AI services to the edge, or inferencing at the edge. Such growth in AI data could reverse the general trend towards lower growth in traffic on mobile networks. Many AI-enabled applications will require mobile connectivity including autonomous vehicles, smart glasses, generative AI services and many other applications. He said that the transmission of this massive increase in data needs to be resilient, fit for purpose, and secure. Supporting this creation of data from AI will require large amount of memory, particularly very high bandwidth memory, such as HBM. This will result in great demand for memory that supports AI applications. Micron announced that it is now shipping HBM4 memory to key customers, these are for early qualification efforts. The Micron HBM4 provides up to 2.0TB/s bandwidth and 24GB capacity per 12-high die stack. The company says that their HBM4 uses its 1-beta DRAM node, advanced through silicon via technologies, and has a highly capable built-in self-test. See image below. Micron HBM4 Memory HBM memory consisting of stacks of DRAM die with massively parallel interconnects to provide high bandwidth are combined GPU's such as those from Nvidia. This memory close to the processor allows training and inference of various AI models. The current generation of HBM memory used in current GPUs use HBM3e memory. At the 2025 March GTC in San Jose, Jensen Huang said that Micron HBM memory was being used in some of their GPU platforms. The manufacturers of HBM memories are SK Hynix, Samsung and Micron with SK Hynix and Samsung providing the majority of supply and with Micron coming in third. SK hynix was the first to announce HBM memory in 2013, which was adopted as an industry standard by JEDEC that same year. Samsung followed in 2016 and in 2020 Micron said that it would create its own HBM memory. All of these companies expect to be shipping HBM4 memories in volume by sometime in 2026. Numen, a company involved in magnetic random access memory applications, recently talked about how traditional memories used in AI applications, such as DRAM and SRAM have limitations in power, bandwidth and storage density. They said that processing performance has skyrocketed by 60,000X over the past 20 years but DRAM bandwidth has improved only 100X, creating a 'memory wall.' The company says that its AI Memory Engine is a highly configurable memory subsystem IP that enables significant improvements in power efficiency, performance, intelligence, and endurance. This is not only for Numem's MRAM-based architecture, but also third-party MRAMs, RRAM, PCRAM, and Flash Memory. Numem said that it has developed next-generation MRAM supporting die densities up to 1GB which can deliver SRAM-class performance with up to 2.5X higher memory density in embedded applications and 100X lower standby power consumption. The company says that its solutions are foundry-ready and production-capable today. Coughlin Associates and Objective Analysis in their Deep Look at New Memories report predict that AI and other memory-intensive applications, including the use of AI inference in embedded devices such as smart watches, hearing aids and other applications are already using MRAM, RRAM and other emerging memory technologies will decrease the costs and increase production of these memories. These memories technologies are already available from major semiconductor foundries. They scale to smaller lithographic scaling that DRAM and SRAM and because they are non-volatile, no refreshes are needed and so they consume less power. As a result, these memories allow more memory capacity and lower power consumption in space and power constrained environments. MRAM and RRAM are also being built into industrial, enterprise and data center applications. The figure below shows our projections for replacement of traditional memories, SRAM, DRAM, NOR and NAND Flash memory by these emerging memories. NOR and SRAM, in particular, for embedded memories are projected to be replaced by these new memories within the next decade as part of a future $100B memory market. Projected replacement of conventional memories with new memories AI will generate increased demand for memory to support training and inference. It will also increase the demand for data over mobile networks. This will drive demand for HBM memory but also increase demand for new emerging memory technologies.
Yahoo
an hour ago
- Yahoo
Mileseey Launches Groundbreaking GenePro G1 GPS Laser Rangefinder on Kickstarter - A New Era for Golfers
CITY OF INDUSTRY, Calif., June 11, 2025 /PRNewswire/ -- Mileseey Golf, a leading name in precision laser technology, announced the Kickstarter debut of its revolutionary GenePro G1 on June 10 at 7AM PT. Engineered for the modern golfer who demands accuracy and seamless data integration, the GenePro G1 is the first hybrid GPS + laser rangefinder to feature a 2.13" AMOLED touchscreen and built-in maps of over 43,000 golf courses worldwide. Combining advanced slope compensation with environmental elements including temperature, humidity, and altitude, the GenePro G1 ensures players have the most precise data for every shot. Its Ball-to-Pin™ mode even measures through obstacles, empowering golfers to tackle the toughest of holes. "Our mission is to empower golfers to master their game with absolute confidence," said Jore Chou, founder of Mileseey Golf. "The GenePro G1 is not just a tool—it's a new way of seeing the course, planning shots, and experiencing the joys of golf." Backers can reserve their GenePro G1 at special early-bird pricing on Kickstarter starting June 10. View original content to download multimedia: SOURCE Mileseey Technology (US) Inc. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data