Data jam studies heat islands in Mumbai
MUMBAI: The next time you're sweating it on a hot and muggy day, take a look around. The aim of this exercise is to determine whether you are positioned in a 'heat island'.
'If you think the temperature on IMD's site does not reflect what you're experiencing, it could be because of your location and the impact of urban heat,' said a presenter at Mumbai 'Datajam on Urban Heat in Mumbai' at St Xavier's College on Saturday.
The data jam was organised by Open City, an urban data portal, along with NGOs such as C40 Cities, World Resources Institute India and Maharashtra's State Climate Cell. For seven hours on Saturday, more than 30 people including students and professionals assembled to study the effects of urban heat and how to tackle it.
According to the United States Environmental Protection Agency, urban heat islands form when some areas experience hotter temperatures than others within a city.
The participants at the data jam worked with data sets and maps that reflected land surface temperatures, demographics, formal and informal settlements, the morphology of buildings and other related elements in each civic ward in Mumbai – with a view to identifying heat islands, reasons and solutions. The civic wards focused on most were the ones that topped the list in vulnerability assessment done for the Mumbai Climate Action Plan (MCAP).
Slum areas formed the largest heat islands in Mumbai, owing to lack of ventilation and population density. But, the participants found, this phenomenon extended to some mid-rise buildings, which created a wind tunnel and trapped heat.
Interestingly, in H East ward, 70% of the population is crammed into 10% of the land that forms the slum pockets in Bandra East. This 10% land traps high amounts of heat, where temperatures range from 43 to 48 degrees Celsius.
Similarly, in the Bandra-Kurla Complex, which is spacious and ventilated, the glass buildings are the heat traps. Moreover, H East ward has little or no healthy vegetation.
M-East ward (Govandi), which ranks low on socio-economic factors, was divided according to the morphology of buildings and type of settlements. Participants highlighted that the BARC residential area was the only ideal spot in the ward, with low-rises and low population density.
'While several slum rehabilitation buildings are planned in the area, the height, density and construction material should be considered in terms of thermal conductivity. The ideal would be mid-rise and mid-density,' said Varun Phadke, a second-year MTech student at IIT Bombay.
Participants working on L ward (Kurla) suggested natural coolers and heat-resistant pavements as mitigation measures in the long term, more air-conditioned buses, and water filters at the bus stops. They also said that the Mithi River traps heat due to stagnant water and pollution, so cleaning it would act as a cooling agent.
These suggestions will be further presented to the ward officers and the state climate cell. The Maharashtra state climate cell undertook the development of a heat-resilience framework, which aims to look at local wards on a granular level for heat mitigation.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Hindustan Times
9 hours ago
- Hindustan Times
Data jam studies heat islands in Mumbai
MUMBAI: The next time you're sweating it on a hot and muggy day, take a look around. The aim of this exercise is to determine whether you are positioned in a 'heat island'. 'If you think the temperature on IMD's site does not reflect what you're experiencing, it could be because of your location and the impact of urban heat,' said a presenter at Mumbai 'Datajam on Urban Heat in Mumbai' at St Xavier's College on Saturday. The data jam was organised by Open City, an urban data portal, along with NGOs such as C40 Cities, World Resources Institute India and Maharashtra's State Climate Cell. For seven hours on Saturday, more than 30 people including students and professionals assembled to study the effects of urban heat and how to tackle it. According to the United States Environmental Protection Agency, urban heat islands form when some areas experience hotter temperatures than others within a city. The participants at the data jam worked with data sets and maps that reflected land surface temperatures, demographics, formal and informal settlements, the morphology of buildings and other related elements in each civic ward in Mumbai – with a view to identifying heat islands, reasons and solutions. The civic wards focused on most were the ones that topped the list in vulnerability assessment done for the Mumbai Climate Action Plan (MCAP). Slum areas formed the largest heat islands in Mumbai, owing to lack of ventilation and population density. But, the participants found, this phenomenon extended to some mid-rise buildings, which created a wind tunnel and trapped heat. Interestingly, in H East ward, 70% of the population is crammed into 10% of the land that forms the slum pockets in Bandra East. This 10% land traps high amounts of heat, where temperatures range from 43 to 48 degrees Celsius. Similarly, in the Bandra-Kurla Complex, which is spacious and ventilated, the glass buildings are the heat traps. Moreover, H East ward has little or no healthy vegetation. M-East ward (Govandi), which ranks low on socio-economic factors, was divided according to the morphology of buildings and type of settlements. Participants highlighted that the BARC residential area was the only ideal spot in the ward, with low-rises and low population density. 'While several slum rehabilitation buildings are planned in the area, the height, density and construction material should be considered in terms of thermal conductivity. The ideal would be mid-rise and mid-density,' said Varun Phadke, a second-year MTech student at IIT Bombay. Participants working on L ward (Kurla) suggested natural coolers and heat-resistant pavements as mitigation measures in the long term, more air-conditioned buses, and water filters at the bus stops. They also said that the Mithi River traps heat due to stagnant water and pollution, so cleaning it would act as a cooling agent. These suggestions will be further presented to the ward officers and the state climate cell. The Maharashtra state climate cell undertook the development of a heat-resilience framework, which aims to look at local wards on a granular level for heat mitigation.
NDTV
a day ago
- NDTV
Scientists Smash Nuclear Fusion Record, Igniting Hope For Limitless Clean Energy
Scientists in Germany have taken a giant leap towards producing near-limitless, clean energy using nuclear fusion -- the same fiery reaction that takes place in the core of the Sun. Using the Wendelstein 7-X nuclear fusion reactor, the researchers managed to sustain the fusion experiment for an impressive 43 seconds, smashing the previous records, according to a report in LiveScience. Developing nuclear fusion for energy requirements has long been a goal of scientists but reaching temperatures over 100 million degrees Celsius and sustaining its long-term operation has always proved a challenge. Moreover, current reactor concepts consume more energy than they are able to produce. However, using the machine with extremely low-density and electrically charged hydrogen gas as fuel, scientists managed to achieve the breakthrough. Wendelstein 7-X, officially called a 'stellarator', is a type of fusion device that confines hot, charged gas, known as plasma, with powerful external magnets controlling it. On May 22, plasma inside Wendelstein 7-X was raised to over 20 million Celsius, reaching a peak of 30 million Celsius. It also reached a new record high triple product, a key metric for the success of fusion power generators. The triple product is a combination of the density of particles in the plasma, the temperature required for these particles to fuse, and the energy confinement time. "The new record is a tremendous achievement by the international team. Elevating the triple product to tokamak levels during long plasma pulses marks another important milestone on the way toward a power-plant-capable stellarator," said Thomas Klinger, Head of Operations at Wendelstein 7-X. Notably, the highest values for the triple product were achieved by the Japanese Tokamak JT60U (decommissioned in 2008) and the European Tokamak facility JET in Great Britain (decommissioned in 2023). Holy grail Scientists regard nuclear fusion as the holy grail of energy. It is what powers our Sun as atomic nuclei are merged to create massive amounts of energy, which is the opposite of the fission process used in atomic weapons and nuclear power plants, where the heavy atom is split into multiple smaller ones. Last year, the Experimental Advanced Superconducting Tokamak (EAST) fusion energy reactor, dubbed China's 'artificial sun', sustained plasma for a whopping 1,000 seconds, breaking the 403-second record it set in 2023. Unlike fission, fusion emits no greenhouse gases and carries less risk of accidents or the theft of atomic material. By mimicking the natural reaction of the sun, scientists are hoping that the technology may help harness near-unlimited amounts of energy and help battle the energy crisis, as well as power humanity's exploration beyond the solar system
Indian Express
a day ago
- Indian Express
Magnitude of bridge hits when you see it in real: IISc expert
They say one cannot erect a great building on a weak foundation. And definitely not, when it's the world's highest railway bridge — now a distinction given to the Chenab Railway Bridge — inaugurated by Prime Minister Narendra Modi on Friday. The Chenab bridge remains one of the highest points in the career of Madhavi Latha G, a professor of civil engineering at Indian Institute of Science (IISc), Bengaluru. Latha worked on the project for 17 years — from 2005, shortly after joining IISc, to 2022, when she took her family to the site to have a look at the almost-completed bridge. 'Working on this project has been an experience of a lifetime,' Latha, 54, told The Indian Express. A civil engineering graduate from Jawaharlal Nehru Technological University in Kakinada, Latha went on to pursue her MTech from NIT Warangal and a PhD from IIT Madras, before landing a job as assistant professor at IIT Guwahati in 2003. After a year, she moved to IISc, where she got assigned to this project. The Chenab Railway Bridge is a steel-and-concrete structure extending 1,315 m across the river gorge. It consists of a 530-metre-long approach bridge and a 785-metre-long deck arch bridge (the part on which vehicles ply). The steel structure can endure extreme weather conditions, including temperatures as low as -20 degrees Celsius. It can also withstand wind speed of 220 km/hr, which is equivalent to winds associated with a super cyclone. The region falls under seismic zone IV and the proposed bridge had to have the ability to withstand earthquakes of magnitude up to 8 on the Richter scale. Young mountains with rocky and steep slopes, fractures and joints meant that the civil engineers had to first prepare the ground so that the strong foundation could be laid. 'The region is geotechnically and geologically challenging and close to the boundary where the Himalayas started forming,' Latha said. As the joints were found dipping towards the valley, the possibility of potential rock slides and slope slides were high, so her design was to fix these from sliding. 'Any slope is standing against gravity and it will always be vulnerable to slide off. This is the major instability in such terrains. Mountain formation is an outcome of tectonic activities and since these mountains are still young and continuously evolving, there are inherent discontinuities, joints, separations,' she said, describing the site where the bridge now stands. Stitching together loose rock fragments, fixing slopes into the deep Chenab valley and stabilising the ground in a highly active seismic zone to lay the bridge's foundation was the task at her hand. She was primarily responsible for designing protection for the bridge's foundation. 'While designing, we had to consider the many joints present within the slopes which posed a threat of making the ground unstable, in particular if there was seismic activity. In order to make the bridge quake-resistant, we had to first stabilise these slopes where I was intensely involved,' Madhavi Latha said. 'To stabilise the slope we used cement grouts, so that loose rock fragments, if any, could be bonded together. In addition, we used steel rock anchors to stitch all these joints and connect these fragments,' she explained. Madhavi Latha said at one point her professional skills were required nearly 24×7, giving her no time to rest or sleep. 'At a particular slope cutting, I remember spending sleepless nights as my inputs were required at every stage. Ferrying people and machinery to such altitudes makes the everyday work very expensive,' she said. Her last visit to the site with family in 2022 was a big revelation. 'Images cannot do justice, the magnitude of the bridge hits when one sees it in real,' she said.
