logo
Genesis GV80 Hybrid coming in 2026

Genesis GV80 Hybrid coming in 2026

7NEWS20-06-2025
Luxury brand Genesis will look to debut its new hybrid drivetrain in the GV80 SUV in late 2026, according to a new report from a Korean news outlet.
Korea JoongAng Daily cites 'a source familiar with the matter' saying the Hyundai Motor Group subsidiary's first hybrid model will commence production in September 2026, followed by the smaller GV70 Hybrid in March 2027 and then a G80 Hybrid thereafter.
The source added the GV80 Hybrid, based on the current model which was recently facelifted, will have a short lifespan. A 'fully revamped GV80 Hybrid is slated for the second half of 2028', according to the unnamed source.
Those timings align with Hyundai Motor Group's official communications about its next-generation hybrid rollout from April, which confirmed the new 2.5-litre turbocharged hybrid system debuting in the next-gen Palisade SUV will spawn a rear-drive variation bound for Genesis vehicles sometime in 2026.
Hundreds of new car deals are available through CarExpert right now. Get the experts on your side and score a great deal. Browse now.
Above: 2025 Hyundai Palisade 2.5T HEV system
At the heart of the Korean carmaker's latest hybrid system is a new transmission, which features two integrated electric motors and can be 'paired flexibly' with a number of the company's existing engines to optimise performance and efficiency.
The new transmission features what the Hyundai group calls a P1 and P2 motor, the former acting as a starter-generator while the latter assists with vehicle propulsion and regenerative braking. Hyundai adds the P1 motor is incorporated into the Active Shift Control (ASC) hybrid transmission logic, offering 'faster and smoother' shifts.
In the case of the Palisade's 2.5-litre turbo-petrol system, the combustion engine has also been re-engineered to be more efficient. Beyond the P1 and P2 motors, the ICE unit features enhanced cylinder flow and a high-efficiency combustion cycle optimised for hybrids.
Hyundai says the new Palisade Hybrid offers fuel efficiency of 7.1L/100km, which is approximately 45 per cent better than the 2.5T engine without the new hybrid tech. The Palisade Hybrid's 245kW and 460Nm outputs also represent 19 and 9.0 per cent improvements respectively over the non-hybrid version of the same engine.
Above: Genesis Electrified GV70
This is the latest development in Genesis's rejigged electrification strategy in response to slowing EV sales growth. Genesis had previously confirmed all its new models from 2025 onwards would be electric vehicles working towards an EV-only lineup by 2030, but has since adjusted to include hybrids and is also developing range-extender EV technologies.
'Five years back we anticipated that the EV era would arrive very quickly, and we really wanted to be a leader and a disruptor in the EV space,' Genesis global boss Mike Song said in April 2024, as reported by The Korean Car Blog.
'Electrification is still our vision. We will have 100 per cent electrified vehicles, but the market and the customers now want hybrid more than EV, so we really want to bring Genesis hybrid into the market as soon as possible. We will apply it to as many models as possible.'
Genesis Australia head Justin Douglass said he wants to offer hybrid models Down Under as soon as they're available.
'We are eager to introduce these new powertrains into our range in Australia at the earliest opportunity, enabling us to further expand our growing customer base and meet the needs of our discerning clientele,' Mr Douglass said in April 2024.
Above: Genesis GV80 Black
The Genesis GV80 is currently on sale in Australia with one drivetrain option, a 3.5-litre V6 twin-turbo petrol engine without any form of electric assistance – despite a 48V version with an electric supercharger being available overseas.
A smaller 2.5-litre four-cylinder turbo-petrol is also offered in the domestic market as the base option, though this powertrain was axed from the Australian lineup pre-facelift. This engine will return though, once the GV80 Hybrid reaches the Australian market.
It's unclear whether the Genesis hybrid system's outputs will differ greatly from the 245kW/460Nm quoted by the front-drive-biased Hyundai Palisade, though given Genesis's sportier rear-drive layout and more premium positioning, it wouldn't be surprising if the luxury arm pushed for a beefier tune around the 250kW/500Nm mark.
Stay tuned to CarExpert for all the latest.
Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

2026 Hyundai Palisade: V6 and diesel to be axed in favour of four-cylinder and hybrid
2026 Hyundai Palisade: V6 and diesel to be axed in favour of four-cylinder and hybrid

The Advertiser

time2 days ago

  • The Advertiser

2026 Hyundai Palisade: V6 and diesel to be axed in favour of four-cylinder and hybrid

Details of the 2026 Hyundai Palisade have been uncovered ahead of second-generation large flagship SUV's scheduled Australian arrival in late 2025. The new Palisade had already been confirmed to bring a hybrid powertrain for the first time – replacing the existing 2.2-litre turbo-diesel four-cylinder – in order to rival the Toyota Kluger, and Hyundai had previously also said a 2.5-litre turbocharged four-cylinder petrol engine was "under study" for Australia. Now Australian government certification documents confirm the next Palisade will offer a full range of front-wheel drive and all-wheel drive options, powered by both hybrid and non-hybrid 2.5-litre turbo-petrol powertrains. CarExpert can save you thousands on a new car. Click here to get a great deal. No other engines are included in the filing, signalling the end of not only diesel power but also the 3.8-litre petrol V6 from the new Palisade lineup. The Australian Design Rule documents also show the next-generation Palisade, codenamed 'LX3', has again been approved in both seven- and eight-seat interior configurations. Hyundai Australia could not share any details on the new Santa Fe's powertrain options or otherwise when contacted by CarExpert. The Palisade HEV (hybrid electric vehicle) has been granted approval in four model grades – seven-seat front-drive and AWD, and eight-seat FWD and AWD. The Palisade HEV is already on sale in the US, where it's offered in both FWD and AWD layouts, both priced $US1000 ($1537) higher than equivalent petrol-powered versions. In Australia, the HEV is expected to be priced similarly to the existing diesel Palisade, which is currently priced from $70,800 before on-road costs, although Hyundai is currently offering drive-away deals on certain variants. The hybrid system comprises the Hyundai group's 2.5-litre turbocharged four-cylinder petrol engine (T-GDI) and six-speed torque-convertor automatic transmission, but adds a single electric motor powered by a 1.65kWh lithium-ion battery. US-market Palisade hybrids are rated at 258hp (245kW) and 339lb-ft (460Nm) of torque, and while these figures cannot be directly carried over to Australian vehicles, our Palisade hybrid should still out-muscle the turbo-diesel's 147kW/440Nm outputs. That will also make it more powerful than the 3.8-litre V6 in the current model, which makes 217kW/355Nm and has official combined fuel consumption figures of between 10.8-11.1L/100km. Based on overseas specs, the Palisade HEV will be marginally thirstier than the diesel, with average consumption of 8.8L/100km against the diesel's 8.6-8.8L/100km. The Palisade's non-hybrid 2.5-litre turbo-petrol four – already seen under the bonnet of the Hyundai Sonata N Line in Australia, where it makes 213kW/422Nm – has also been approved in seven and eight-seat Palisade, in both FWD and AWD forms. ADR documents also confirm the second-generation Palisade will be larger than its predecessor in almost every dimension, growing an additional 65mm to 5060mm in length on a 70mm longer (2970mm) wheelbase. Overseas specs show no change in cargo volume or cabin space between petrol and hybrid versions. The cabin is expected to feature a 12.3-inch digital instrument cluster and a 12.3-inch infotainment touchscreen, plus a more premium look including 'pixel' lighting elements. Further details are expected to be confirmed by Hyundai Australia as the MkII Palisade's Australian arrival – scheduled between October and December this year – draws near. MORE: Everything Hyundai Content originally sourced from: Details of the 2026 Hyundai Palisade have been uncovered ahead of second-generation large flagship SUV's scheduled Australian arrival in late 2025. The new Palisade had already been confirmed to bring a hybrid powertrain for the first time – replacing the existing 2.2-litre turbo-diesel four-cylinder – in order to rival the Toyota Kluger, and Hyundai had previously also said a 2.5-litre turbocharged four-cylinder petrol engine was "under study" for Australia. Now Australian government certification documents confirm the next Palisade will offer a full range of front-wheel drive and all-wheel drive options, powered by both hybrid and non-hybrid 2.5-litre turbo-petrol powertrains. CarExpert can save you thousands on a new car. Click here to get a great deal. No other engines are included in the filing, signalling the end of not only diesel power but also the 3.8-litre petrol V6 from the new Palisade lineup. The Australian Design Rule documents also show the next-generation Palisade, codenamed 'LX3', has again been approved in both seven- and eight-seat interior configurations. Hyundai Australia could not share any details on the new Santa Fe's powertrain options or otherwise when contacted by CarExpert. The Palisade HEV (hybrid electric vehicle) has been granted approval in four model grades – seven-seat front-drive and AWD, and eight-seat FWD and AWD. The Palisade HEV is already on sale in the US, where it's offered in both FWD and AWD layouts, both priced $US1000 ($1537) higher than equivalent petrol-powered versions. In Australia, the HEV is expected to be priced similarly to the existing diesel Palisade, which is currently priced from $70,800 before on-road costs, although Hyundai is currently offering drive-away deals on certain variants. The hybrid system comprises the Hyundai group's 2.5-litre turbocharged four-cylinder petrol engine (T-GDI) and six-speed torque-convertor automatic transmission, but adds a single electric motor powered by a 1.65kWh lithium-ion battery. US-market Palisade hybrids are rated at 258hp (245kW) and 339lb-ft (460Nm) of torque, and while these figures cannot be directly carried over to Australian vehicles, our Palisade hybrid should still out-muscle the turbo-diesel's 147kW/440Nm outputs. That will also make it more powerful than the 3.8-litre V6 in the current model, which makes 217kW/355Nm and has official combined fuel consumption figures of between 10.8-11.1L/100km. Based on overseas specs, the Palisade HEV will be marginally thirstier than the diesel, with average consumption of 8.8L/100km against the diesel's 8.6-8.8L/100km. The Palisade's non-hybrid 2.5-litre turbo-petrol four – already seen under the bonnet of the Hyundai Sonata N Line in Australia, where it makes 213kW/422Nm – has also been approved in seven and eight-seat Palisade, in both FWD and AWD forms. ADR documents also confirm the second-generation Palisade will be larger than its predecessor in almost every dimension, growing an additional 65mm to 5060mm in length on a 70mm longer (2970mm) wheelbase. Overseas specs show no change in cargo volume or cabin space between petrol and hybrid versions. The cabin is expected to feature a 12.3-inch digital instrument cluster and a 12.3-inch infotainment touchscreen, plus a more premium look including 'pixel' lighting elements. Further details are expected to be confirmed by Hyundai Australia as the MkII Palisade's Australian arrival – scheduled between October and December this year – draws near. MORE: Everything Hyundai Content originally sourced from: Details of the 2026 Hyundai Palisade have been uncovered ahead of second-generation large flagship SUV's scheduled Australian arrival in late 2025. The new Palisade had already been confirmed to bring a hybrid powertrain for the first time – replacing the existing 2.2-litre turbo-diesel four-cylinder – in order to rival the Toyota Kluger, and Hyundai had previously also said a 2.5-litre turbocharged four-cylinder petrol engine was "under study" for Australia. Now Australian government certification documents confirm the next Palisade will offer a full range of front-wheel drive and all-wheel drive options, powered by both hybrid and non-hybrid 2.5-litre turbo-petrol powertrains. CarExpert can save you thousands on a new car. Click here to get a great deal. No other engines are included in the filing, signalling the end of not only diesel power but also the 3.8-litre petrol V6 from the new Palisade lineup. The Australian Design Rule documents also show the next-generation Palisade, codenamed 'LX3', has again been approved in both seven- and eight-seat interior configurations. Hyundai Australia could not share any details on the new Santa Fe's powertrain options or otherwise when contacted by CarExpert. The Palisade HEV (hybrid electric vehicle) has been granted approval in four model grades – seven-seat front-drive and AWD, and eight-seat FWD and AWD. The Palisade HEV is already on sale in the US, where it's offered in both FWD and AWD layouts, both priced $US1000 ($1537) higher than equivalent petrol-powered versions. In Australia, the HEV is expected to be priced similarly to the existing diesel Palisade, which is currently priced from $70,800 before on-road costs, although Hyundai is currently offering drive-away deals on certain variants. The hybrid system comprises the Hyundai group's 2.5-litre turbocharged four-cylinder petrol engine (T-GDI) and six-speed torque-convertor automatic transmission, but adds a single electric motor powered by a 1.65kWh lithium-ion battery. US-market Palisade hybrids are rated at 258hp (245kW) and 339lb-ft (460Nm) of torque, and while these figures cannot be directly carried over to Australian vehicles, our Palisade hybrid should still out-muscle the turbo-diesel's 147kW/440Nm outputs. That will also make it more powerful than the 3.8-litre V6 in the current model, which makes 217kW/355Nm and has official combined fuel consumption figures of between 10.8-11.1L/100km. Based on overseas specs, the Palisade HEV will be marginally thirstier than the diesel, with average consumption of 8.8L/100km against the diesel's 8.6-8.8L/100km. The Palisade's non-hybrid 2.5-litre turbo-petrol four – already seen under the bonnet of the Hyundai Sonata N Line in Australia, where it makes 213kW/422Nm – has also been approved in seven and eight-seat Palisade, in both FWD and AWD forms. ADR documents also confirm the second-generation Palisade will be larger than its predecessor in almost every dimension, growing an additional 65mm to 5060mm in length on a 70mm longer (2970mm) wheelbase. Overseas specs show no change in cargo volume or cabin space between petrol and hybrid versions. The cabin is expected to feature a 12.3-inch digital instrument cluster and a 12.3-inch infotainment touchscreen, plus a more premium look including 'pixel' lighting elements. Further details are expected to be confirmed by Hyundai Australia as the MkII Palisade's Australian arrival – scheduled between October and December this year – draws near. MORE: Everything Hyundai Content originally sourced from: Details of the 2026 Hyundai Palisade have been uncovered ahead of second-generation large flagship SUV's scheduled Australian arrival in late 2025. The new Palisade had already been confirmed to bring a hybrid powertrain for the first time – replacing the existing 2.2-litre turbo-diesel four-cylinder – in order to rival the Toyota Kluger, and Hyundai had previously also said a 2.5-litre turbocharged four-cylinder petrol engine was "under study" for Australia. Now Australian government certification documents confirm the next Palisade will offer a full range of front-wheel drive and all-wheel drive options, powered by both hybrid and non-hybrid 2.5-litre turbo-petrol powertrains. CarExpert can save you thousands on a new car. Click here to get a great deal. No other engines are included in the filing, signalling the end of not only diesel power but also the 3.8-litre petrol V6 from the new Palisade lineup. The Australian Design Rule documents also show the next-generation Palisade, codenamed 'LX3', has again been approved in both seven- and eight-seat interior configurations. Hyundai Australia could not share any details on the new Santa Fe's powertrain options or otherwise when contacted by CarExpert. The Palisade HEV (hybrid electric vehicle) has been granted approval in four model grades – seven-seat front-drive and AWD, and eight-seat FWD and AWD. The Palisade HEV is already on sale in the US, where it's offered in both FWD and AWD layouts, both priced $US1000 ($1537) higher than equivalent petrol-powered versions. In Australia, the HEV is expected to be priced similarly to the existing diesel Palisade, which is currently priced from $70,800 before on-road costs, although Hyundai is currently offering drive-away deals on certain variants. The hybrid system comprises the Hyundai group's 2.5-litre turbocharged four-cylinder petrol engine (T-GDI) and six-speed torque-convertor automatic transmission, but adds a single electric motor powered by a 1.65kWh lithium-ion battery. US-market Palisade hybrids are rated at 258hp (245kW) and 339lb-ft (460Nm) of torque, and while these figures cannot be directly carried over to Australian vehicles, our Palisade hybrid should still out-muscle the turbo-diesel's 147kW/440Nm outputs. That will also make it more powerful than the 3.8-litre V6 in the current model, which makes 217kW/355Nm and has official combined fuel consumption figures of between 10.8-11.1L/100km. Based on overseas specs, the Palisade HEV will be marginally thirstier than the diesel, with average consumption of 8.8L/100km against the diesel's 8.6-8.8L/100km. The Palisade's non-hybrid 2.5-litre turbo-petrol four – already seen under the bonnet of the Hyundai Sonata N Line in Australia, where it makes 213kW/422Nm – has also been approved in seven and eight-seat Palisade, in both FWD and AWD forms. ADR documents also confirm the second-generation Palisade will be larger than its predecessor in almost every dimension, growing an additional 65mm to 5060mm in length on a 70mm longer (2970mm) wheelbase. Overseas specs show no change in cargo volume or cabin space between petrol and hybrid versions. The cabin is expected to feature a 12.3-inch digital instrument cluster and a 12.3-inch infotainment touchscreen, plus a more premium look including 'pixel' lighting elements. Further details are expected to be confirmed by Hyundai Australia as the MkII Palisade's Australian arrival – scheduled between October and December this year – draws near. MORE: Everything Hyundai Content originally sourced from:

2026 Hyundai Santa Fe drops troublesome transmission
2026 Hyundai Santa Fe drops troublesome transmission

The Advertiser

time2 days ago

  • The Advertiser

2026 Hyundai Santa Fe drops troublesome transmission

An upgraded 2026 Hyundai Santa Fe has been revealed in the US with a conventional torque-converter automatic transmission in place of the large seven-seat SUV's problematic dual-clutch auto. The US market's petrol-powered Santa Fe previously employed an eight-speed dual-clutch automatic transmission (DCT) made by the Korean automaker's affiliate, Hyundai Transys, which has been the subject of multiple recalls in North America. The most recent US recall impacted more than 12,000 vehicles with an estimated defect rate of 100 per cent. Affected Santa Fe vehicles could unexpectedly shift themselves from Park to Neutral and roll away. This followed a previous October 2022 recall and stop-sale in the US, impacting 61,861 vehicles including the 2021-2022 Santa Fe. CarExpert can save you thousands on a new car. Click here to get a great deal. For the 2026 model year, Hyundai Motor America has replaced the DCT in 2.5-litre petrol Santa Fe with an eight-speed torque-converter automatic. There's no change for the Santa Fe Hybrid also offered in US showrooms, which continues to use a six-speed torque-converter automatic. The news doesn't impact the Santa Fe sold in Australia, which is manufactured in South Korea. The US-market version is produced in the US state of Alabama. The Santa Fe has had only one transmission-related recall in Australia, where owners were warned of a potential loss of power while driving. An Australian recall issued in January 2023 impacted 4469 Hyundai vehicles fitted with the eight-speed DCT, including the previous-generation Santa Fe as well as the Kona small SUV, Sonata N Line sedan, and the hot i30 N hatch and sedan. Hyundai Australia confirmed to CarExpert it has no plans to replace the eight-speed DCT that has been in the current-generation Santa Fe since it was released here in 2024. Transmissions for Hyundai and Kia, which is also part of the broader Hyundai Motor Group (HMG), are made in the US as well as South Korea, China, and the Czech Republic. The Kia Sorento sold in the US also uses the same eight-speed DCT, which is codenamed D8LF1, and was included in the latest US recall due to the same issues. Despite this, the US arm of the automaker told Car and Driver it won't follow Hyundai in switching to a conventional automatic for the Sorento. Dual-clutch transmissions are designed to reduce fuel consumption and improve responsiveness by pre-selecting the next ratio and producing faster, smoother gear shifts when operating correctly. Several manufacturers have faced challenges after faulty DCTs in their vehicles resulted in jerkiness and even total transmission failure. The most prominent were from the Volkswagen Group, including its Audi brand, and Ford Australia – which is facing an ongoing class-action law suit following a record $10 million fine from the Australian Competition and Consumer Commission (ACCC) in 2018 for its mishandling of the customer complaints about its 'Powershift' DCTs. Hyundai first offered a dual-clutch transmission in its Veloster sports hatch in Australia in 2012. MORE: Everything Hyundai Content originally sourced from: An upgraded 2026 Hyundai Santa Fe has been revealed in the US with a conventional torque-converter automatic transmission in place of the large seven-seat SUV's problematic dual-clutch auto. The US market's petrol-powered Santa Fe previously employed an eight-speed dual-clutch automatic transmission (DCT) made by the Korean automaker's affiliate, Hyundai Transys, which has been the subject of multiple recalls in North America. The most recent US recall impacted more than 12,000 vehicles with an estimated defect rate of 100 per cent. Affected Santa Fe vehicles could unexpectedly shift themselves from Park to Neutral and roll away. This followed a previous October 2022 recall and stop-sale in the US, impacting 61,861 vehicles including the 2021-2022 Santa Fe. CarExpert can save you thousands on a new car. Click here to get a great deal. For the 2026 model year, Hyundai Motor America has replaced the DCT in 2.5-litre petrol Santa Fe with an eight-speed torque-converter automatic. There's no change for the Santa Fe Hybrid also offered in US showrooms, which continues to use a six-speed torque-converter automatic. The news doesn't impact the Santa Fe sold in Australia, which is manufactured in South Korea. The US-market version is produced in the US state of Alabama. The Santa Fe has had only one transmission-related recall in Australia, where owners were warned of a potential loss of power while driving. An Australian recall issued in January 2023 impacted 4469 Hyundai vehicles fitted with the eight-speed DCT, including the previous-generation Santa Fe as well as the Kona small SUV, Sonata N Line sedan, and the hot i30 N hatch and sedan. Hyundai Australia confirmed to CarExpert it has no plans to replace the eight-speed DCT that has been in the current-generation Santa Fe since it was released here in 2024. Transmissions for Hyundai and Kia, which is also part of the broader Hyundai Motor Group (HMG), are made in the US as well as South Korea, China, and the Czech Republic. The Kia Sorento sold in the US also uses the same eight-speed DCT, which is codenamed D8LF1, and was included in the latest US recall due to the same issues. Despite this, the US arm of the automaker told Car and Driver it won't follow Hyundai in switching to a conventional automatic for the Sorento. Dual-clutch transmissions are designed to reduce fuel consumption and improve responsiveness by pre-selecting the next ratio and producing faster, smoother gear shifts when operating correctly. Several manufacturers have faced challenges after faulty DCTs in their vehicles resulted in jerkiness and even total transmission failure. The most prominent were from the Volkswagen Group, including its Audi brand, and Ford Australia – which is facing an ongoing class-action law suit following a record $10 million fine from the Australian Competition and Consumer Commission (ACCC) in 2018 for its mishandling of the customer complaints about its 'Powershift' DCTs. Hyundai first offered a dual-clutch transmission in its Veloster sports hatch in Australia in 2012. MORE: Everything Hyundai Content originally sourced from: An upgraded 2026 Hyundai Santa Fe has been revealed in the US with a conventional torque-converter automatic transmission in place of the large seven-seat SUV's problematic dual-clutch auto. The US market's petrol-powered Santa Fe previously employed an eight-speed dual-clutch automatic transmission (DCT) made by the Korean automaker's affiliate, Hyundai Transys, which has been the subject of multiple recalls in North America. The most recent US recall impacted more than 12,000 vehicles with an estimated defect rate of 100 per cent. Affected Santa Fe vehicles could unexpectedly shift themselves from Park to Neutral and roll away. This followed a previous October 2022 recall and stop-sale in the US, impacting 61,861 vehicles including the 2021-2022 Santa Fe. CarExpert can save you thousands on a new car. Click here to get a great deal. For the 2026 model year, Hyundai Motor America has replaced the DCT in 2.5-litre petrol Santa Fe with an eight-speed torque-converter automatic. There's no change for the Santa Fe Hybrid also offered in US showrooms, which continues to use a six-speed torque-converter automatic. The news doesn't impact the Santa Fe sold in Australia, which is manufactured in South Korea. The US-market version is produced in the US state of Alabama. The Santa Fe has had only one transmission-related recall in Australia, where owners were warned of a potential loss of power while driving. An Australian recall issued in January 2023 impacted 4469 Hyundai vehicles fitted with the eight-speed DCT, including the previous-generation Santa Fe as well as the Kona small SUV, Sonata N Line sedan, and the hot i30 N hatch and sedan. Hyundai Australia confirmed to CarExpert it has no plans to replace the eight-speed DCT that has been in the current-generation Santa Fe since it was released here in 2024. Transmissions for Hyundai and Kia, which is also part of the broader Hyundai Motor Group (HMG), are made in the US as well as South Korea, China, and the Czech Republic. The Kia Sorento sold in the US also uses the same eight-speed DCT, which is codenamed D8LF1, and was included in the latest US recall due to the same issues. Despite this, the US arm of the automaker told Car and Driver it won't follow Hyundai in switching to a conventional automatic for the Sorento. Dual-clutch transmissions are designed to reduce fuel consumption and improve responsiveness by pre-selecting the next ratio and producing faster, smoother gear shifts when operating correctly. Several manufacturers have faced challenges after faulty DCTs in their vehicles resulted in jerkiness and even total transmission failure. The most prominent were from the Volkswagen Group, including its Audi brand, and Ford Australia – which is facing an ongoing class-action law suit following a record $10 million fine from the Australian Competition and Consumer Commission (ACCC) in 2018 for its mishandling of the customer complaints about its 'Powershift' DCTs. Hyundai first offered a dual-clutch transmission in its Veloster sports hatch in Australia in 2012. MORE: Everything Hyundai Content originally sourced from: An upgraded 2026 Hyundai Santa Fe has been revealed in the US with a conventional torque-converter automatic transmission in place of the large seven-seat SUV's problematic dual-clutch auto. The US market's petrol-powered Santa Fe previously employed an eight-speed dual-clutch automatic transmission (DCT) made by the Korean automaker's affiliate, Hyundai Transys, which has been the subject of multiple recalls in North America. The most recent US recall impacted more than 12,000 vehicles with an estimated defect rate of 100 per cent. Affected Santa Fe vehicles could unexpectedly shift themselves from Park to Neutral and roll away. This followed a previous October 2022 recall and stop-sale in the US, impacting 61,861 vehicles including the 2021-2022 Santa Fe. CarExpert can save you thousands on a new car. Click here to get a great deal. For the 2026 model year, Hyundai Motor America has replaced the DCT in 2.5-litre petrol Santa Fe with an eight-speed torque-converter automatic. There's no change for the Santa Fe Hybrid also offered in US showrooms, which continues to use a six-speed torque-converter automatic. The news doesn't impact the Santa Fe sold in Australia, which is manufactured in South Korea. The US-market version is produced in the US state of Alabama. The Santa Fe has had only one transmission-related recall in Australia, where owners were warned of a potential loss of power while driving. An Australian recall issued in January 2023 impacted 4469 Hyundai vehicles fitted with the eight-speed DCT, including the previous-generation Santa Fe as well as the Kona small SUV, Sonata N Line sedan, and the hot i30 N hatch and sedan. Hyundai Australia confirmed to CarExpert it has no plans to replace the eight-speed DCT that has been in the current-generation Santa Fe since it was released here in 2024. Transmissions for Hyundai and Kia, which is also part of the broader Hyundai Motor Group (HMG), are made in the US as well as South Korea, China, and the Czech Republic. The Kia Sorento sold in the US also uses the same eight-speed DCT, which is codenamed D8LF1, and was included in the latest US recall due to the same issues. Despite this, the US arm of the automaker told Car and Driver it won't follow Hyundai in switching to a conventional automatic for the Sorento. Dual-clutch transmissions are designed to reduce fuel consumption and improve responsiveness by pre-selecting the next ratio and producing faster, smoother gear shifts when operating correctly. Several manufacturers have faced challenges after faulty DCTs in their vehicles resulted in jerkiness and even total transmission failure. The most prominent were from the Volkswagen Group, including its Audi brand, and Ford Australia – which is facing an ongoing class-action law suit following a record $10 million fine from the Australian Competition and Consumer Commission (ACCC) in 2018 for its mishandling of the customer complaints about its 'Powershift' DCTs. Hyundai first offered a dual-clutch transmission in its Veloster sports hatch in Australia in 2012. MORE: Everything Hyundai Content originally sourced from:

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store