Give salt-and-pepper pork chops a crunchy coating without the deep frying
The salt-and-pepper treatment is a Cantonese technique that can be applied to give almost any meat, seafood or tofu a crunchy exterior and tongue-tingling flavor.
The protein typically is deep-fried, but in this recipe from our cookbook ' Milk Street 365: The All-Purpose Cookbook for Every Day of the Year,' we opt to pan-fry pork that we first dust in cornstarch seasoned generously with Sichuan pepper, black pepper and cayenne.
The starch granules swell when they come in contact with moisture released by the pork as it cooks; as the water evaporates, the starch settles into a rigid, locked network, creating a crunchy coating.
In a classic salt-and-pepper dish, chilies and garlic are quickly fried and tossed with the cooked protein for big, bold, in-your-face flavors. We, however, finish the pork with a fresh, punchy, uncooked mix of sliced scallions, chopped cilantro, minced chilies, rice vinegar and grated ginger. The easiest way to grind the tongue-tingling Sichuan peppercorns for this recipe is in an electric spice grinder.
Don't use thick-cut or bone-in pork chops for this recipe. Look for boneless pork loin chops that are ¼ to ½ inch thick. They sometimes are called pork cutlets. Serve with steamed jasmine rice.
Salt-and-Pepper Pork Chops with Spicy Scallions
Start to finish: 45 minutes
Servings: 4
Ingredients:
1 bunch scallions, thinly sliced
1 cup lightly packed fresh cilantro, roughly chopped
1 Fresno or jalapeño chili, stemmed, seeded and minced
2 tablespoons unseasoned rice vinegar
1 tablespoon finely grated fresh ginger
Kosher salt and ground black pepper
3 tablespoons cornstarch
1 tablespoon Sichuan peppercorns, finely ground
½ to 1 teaspoon cayenne pepper
½ teaspoon Chinese five-spice powder
8 boneless (about 1½ pounds) thin-cut pork loin chops/cutlets (¼ to ½ inch thick), patted dry
⅓ cup grapeseed or other neutral oil
Directions:
In a medium bowl, toss together the scallions, cilantro, chili, vinegar, ginger and ¼ teaspoon salt; set aside. In a wide, shallow dish, mix together the cornstarch, Sichuan pepper, cayenne pepper, five-spice, 2 teaspoons black pepper and 1 teaspoon salt. Dredge the cutlets in the cornstarch mixture, turning to coat both sides and pressing so the mixture adheres, then transfer to a large plate, stacking or shingling as needed.
In a 12-inch nonstick skillet over medium-high, heat the oil until barely smoking. Add half of the cutlets and cook until browned on the bottoms, 2 to 3 minutes. Using tongs, flip the cutlets and cook until golden brown on the second sides, about 1 minute. Transfer to a platter and tent with foil. Cook the remaining cutlets in the same way, using the oil remaining in the skillet. Spoon the scallion-cilantro mixture onto the chops and serve.
EDITOR'S NOTE: For more recipes, go to Christopher Kimball's Milk Street at 177milkstreet.com/ap
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CNET
12 hours ago
- CNET
4 Foods That Can Devastate the Surface of Your Cast-Iron Skillet
Cast iron is tough and holds its form over time if you treat it right but there are a few foods that degrade the surface of cast-iron cookware. If you've worked hard to build and maintain a beautiful skillet, you'd be wise to learn this list of foods you should never leave simmering in a cast-iron pan. To be clear, most of the foods listed below won't harm your cast-iron skillet if cooked quickly. But leave them in the pan for long periods and they'll begin to eat away at your pan's precious coating. To ensure we're not sabotaging our own pots and pans, I asked Eric Rowse, lead chef instructor of Culinary Arts at the Institute of Culinary Education, to share tips for using the cult-favorite cookware and which foods might cause permanent damage. To keep your cast iron slick, smooth and worthy of its place on the stovetop throne, here are four foods you should never cook in a cast-iron skillet 4 foods that can ruin cast-iron cookware According to Rowse, you can technically cook anything in cast iron -- even fish and eggs -- but some foods react poorly to cast iron if not done properly, leading to surface decay or food with a metallic taste. 1. Tomatoes It's OK to cook acidic foods such as tomatoes and vinegar in your cast-iron pan but letting them sit for long periods can eat away at the seasoning. istetiana/Getty Images "Highly acidic foods, such as tomato and tomato-based dishes, can be problematic on raw iron, poorly or underseasoned cast iron," Rowse says. "Cooking these foods in neglected cast iron can lead to a metallic taste in the food. If the pan is well seasoned and cleaned out after each use, it isn't a problem." To be safe, cook some bacon in your skillet afterward to give the seasoning extra protection. As a bonus, you'll have bacon on hand. What you don't want to do is leave the acidic food just sitting in the pan, which can eat away at the seasoning. 2. Vinegar Most BBQ sauces have a fair amount of vinegar that can damage your cast-iron cookware. CNET For the same reason as tomatoes, vinegar can eat away at a seasoned cast-iron skillet, sending you back to square one. Vinegar-based foods like adobo or Carolina-style barbecue sauce are good examples of acidic foods that shouldn't sit in a cast-iron pan for long. If you do use vinegar in a recipe and cook it in cast-iron, be sure to clean the pan immediately afterward with hot water and salt or a small dash of gentle dish soap. Read more: Clean Your Cast Iron Skillet Easily With This Common Kitchen Staple 3. Citrus Avoid cooking citrus-based sauces in your cast-iron cookware for long periods. Géza Bálint Ujvárosi/EyeEm/Getty Images While there may not be a ton of reasons to put citrus in a cast-iron skillet, certain recipes call for a fair amount of lemon or lime juice. A squeeze of lemon at the end probably won't destroy your cast-iron pan but don't let citrus juice simmer inside of it for long or your precious patina won't survive the night. 4. Wine-based sauces Red wine is great to add into stews and red meat dishes. fermate/Getty Images Cooking with wine is almost always a good idea. In fact, we have a list of recipes that thrive with a few ounces of red or white. But letting acid-heavy wine braise or simmer in a cast-iron pot or pan for too long could cause the slick patina to erode, leaving you with an unseasoned skillet that food will stick to. Can you cook eggs in cast iron? A properly seasoned cast-iron skillet can cook eggs without issue. Getty Images While they won't damage your pan, eggs are tricky to pan-fry without having a sticky mess to deal with after. Cast-iron cookware isn't as nonstick as chemically coated pans but it's still a fine candidate for scrambling or frying the morning staple. "I love cooking eggs in cast iron," Rowse told us. "I have a small 5-inch one that I cook fried eggs in. Cast iron is able to get super-hot, and precise control is harder because it retains heat for longer, and therefore it is more difficult to make small adjustments to the temperature." What about fish? I heat my prepared meals up in a skillet or air fryer if I'm home. David Watsky/CNET Likewise, many varieties of fish are flaky and tend to stick to surfaces if not managed properly. If your cast-iron's patina isn't properly slicked or is too hot when the fish goes down, you may end up scraping half of your halibut from the bottom of the pan. How to avoid a cast-iron cooking conundrum Properly seasoning your cast iron will keep foods such as fish and eggs from sticking. Tyler Lizenby/CNET First and foremost, you'll want to properly season so you can cook even the stickiest foods without worry. When cooking acidic foods in cast iron, avoid slow-braising or simmering on the stovetop for long periods. When the food is finished cooking, remove it and wash your cast-iron pan immediately with hot water, a drop of dish soap and a sprinkling of kitchen salt for extra stuck-on foods. And if you're not sure, choose an acid-safe piece of cookware like an enameled Dutch oven or stainless-steel skillet.
CNET
14 hours ago
- CNET
How to fix a gas stove that won't light
Your stove is one of the most important appliances in your kitchen, alongside your refrigerator. While electric ranges have been growing in popularity, gas stoves remain a particularly convenient option. You get instant heat, can enjoy long-term cost savings and can continue even cooking when the power goes out, which is a common summertime occurrence in many areas. According to the US Energy Information Administration, 38% of households in the nation had natural gas cooking appliances in 2020. But unlike with coil-element or electric stoves, you have to ignite the burners to be able to cook anything on a gas stove. And sometimes, they just won't light no matter how much you twist and turn the knobs. This issue is more common than you think. According to a number of Reddit threads, many users struggle with gas stoves that won't light. Some suspect gas flow issues, while others face electrical failures. The good news is the problem is usually something you can fix your own. Learn about the common reasons why your gas stove fails to ignite and how to resolve it. Problem: Clogged with food debris Whether it's grease buildup or food crumbs, one of the most common causes for a gas burner that has trouble igniting is debris blocking gas flow to the igniter. The fix: Begin by removing the grate covering the troubled burner. Next, remove the burner cap, which should lift off with ease. The sealed burner base will either lift off or you may need to remove a couple screws before removing it. Clean the surrounding area with a warm, soapy wash cloth. Soak the sealed burner base in vinegar or warm water and use a stiff brush to remove any debris. Finally, clean any remaining debris out of the burner holes with a toothpick, sewing needle or compressed air. Reinstall the burner, cover the grill and try igniting the burner once more. If this doesn't work, there could be a kink in the gas supply line or a larger issue, and you may want to consult a professional. Problem: A loose connection While there aren't a lot of moving parts on a stovetop, it is possible for connections to come loose, particularly during cleaning or installation. If the wires which connect the igniter to the control module aren't making a solid connection, you won't get the spark needed to properly ignite the burner. The fix: First, stop power to the appliance by unplugging it from the wall or flipping the breaker switch. Remove the grate and burner cap from the problematic burner. Remove the sealed burner base and look for loose connections or disconnected wires. Secure any loose connections and reconnect any disconnected wires, reinstall the burner base, cap and grate. Restore power to the stove and test the connection. Problem: It has a faulty igniter If you've removed debris from the burner base and secured any loose connections, you may be dealing with a faulty igniter. A quick way to tell if the igniter needs to be replaced is by switching the lights in the room off and turning the control knob to the ignite position. If the igniter sparks yellow or orange instead of a bright bluish-white, you will likely need to replace the igniter. The fix: Cut the gas and power to the stove, remove the burner cap and use a screwdriver or hex driver to disconnect the burner base. Then disconnect the wires coming from the igniter. Igniters usually use a quick disconnect system so you won't need to cut or splice wires. Use the model number of your stove to determine which replacement igniter you should purchase, install the new part, and replace the burner base, cap and grate. Restore gas and power to the stove and test the burner. If none of these quick fixes remedy a stubborn burner, you may need to replace the igniter switch, igniter control module or contact a professional for a more in-depth diagnosis.
CBS News
a day ago
- CBS News
Stowaway cat survives 3-week trip from China to Minnesota in shipping container
A cat now calling Minnesota home has braved an international journey of survival and resilience. The people at Northwoods Humane Society in Wyoming, Minnesota, have taken to calling her Stowaway. "It's incredible," said Renee Rude, Northwoods' executive director. "It really is shocking that that happened." The cat was discovered in a shipping container in Oakdale that came all the way from China. Companion Animal Care and Control She isn't up for much attention or activity yet as she builds back her strength. "She's really scared," Rude said. "I can only imagine three weeks in a container without food or water. She must've been eating rodents and drinking condensation." Companion Animal Care and Control, an animal rescue serving Minnesota and Wisconsin, says she was "severely dehydrated and dangerously thin." They brought her to Northwoods, where Rude says she's been eating and drinking. "We don't want to stress her out, so we haven't been able to do an actual exam and assess her health, but she looks OK," she said. "We don't see any obvious injuries or illnesses or anything." The cat was on the move again Tuesday, headed to Pet Haven, a rescue in St. Paul where she has a foster home lined up. "They're going to be able to work with her and help her get to a point where she can trust people and feel comfortable around people," Rude said. "Ultimately, the goal is to find a family of her own and be adopted." Rude says the little cat is a testament to the outsize resilience of animals. "I look forward to hearing in a month's time or two months' time about the turnaround she makes," she said. A permanent name for the cat is still being decided.
