Google Pixel 10 Pro Fold full specifications surface
The upcoming foldable from Google will sport a 6.4-inch LTPS OLED cover screen with 60 to 120Hz refresh rate, 1080 x 2364 pixels resolution, and a peak brightness of 3,000 nits. On the inside, the 10 Pro Fold will boast an 8-inch LTPO OLED display with 2076 x 2156 pixels resolution, and 3,000 nits peak brightness.
It will be powered by the Tensor G5 SoC, paired with a Titan M2 chip, 16 GB LPDDR5X RAM, and up to 1TB UFS 4.0 storage.
At the back, the foldable will offer a triple camera setup with a primary 48 MP sensor, a 10.5 MP ultrawide camera with 127 degrees of FOV, and a 10.8 MP telephoto unit with 5x optical zoom. The 10 Pro Fold will get two selfie cameras, both using a 10 MP sensor with 87 degrees FOV.
The foldable will pack a 5,015 mAh battery with 30W fast charging that's claimed to offer 50% charge in 30 minutes. It'll also offer 15W Qi2 wireless charging support. It will run Android 16 out of the box and get seven years of OS updates, security patches, and Pixel drops.
Google's Pixel 10 Pro Fold will be IP68 certified and weigh 258 g. It'll measure 10.8 mm when folded, and 5.2 mm when in the open state. The phone will be available in Moonstone and Jade colors. It'll also offer Wi-Fi 7, Bluetooth 6, NFC, UWB, dual SIM (nano + eSIM), stereo speakers, triple microphones, and a side mounted fingerprint sensor. Google Pixel 9 Pro Fold
The Google Pixel 10 Pro Fold will be unveiled on August 20 alongside the other Pixel 10 phones, Pixel Watch 4, and Pixel Buds 2a. However, the foldable is expected to go on sale in October.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
GSM Arena
16 minutes ago
- GSM Arena
Oppo Find X9 Ultra could have the same main camera sensor as the Galaxy S26 Ultra
The upcoming Oppo Find X9 Ultra has already been rumored to sport a new 200 MP main camera, and today prolific Chinese leaker Digital Chat Station has shed light on which sensor it will use. It turns out it's the one that Sony is developing - with 200 MP resolution and a 1/1.1" type size. That's not quite 1-inch type, but pretty close. Oppo Find X8 Ultra Intriguingly, Samsung has been rumored to have chosen this exact sensor to use in the Galaxy S26 Ultra's main camera. If all of these rumors pan out, we'll have an interesting situation next year when both the Galaxy S26 Ultra and the Find X9 Ultra arrive, as they will compete against each other while using the same main camera sensor. Well, in theory at least - if the Find X9 Ultra isn't officially sold outside of China (and that's definitely not outside the realm of possibility), then given Samsung's minuscule market share in China, the two won't really compete head-to-head anywhere. Anyway, the Find X9 Ultra will launch after the Chinese New Year (which falls on February 17). DCS says it might arrive a little bit sooner than its predecessor, which was unveiled on April 10, so if we were to bet we'd go with an unveiling sometime in March. Source (in Chinese)
GSM Arena
3 hours ago
- GSM Arena
vivo G3 is official with 6,000 mAh battery
vivo has made the G3 official today as the successor to the G2 from January 2024. The phone comes with a 6.74-inch 720x1600 LCD screen with 90 Hz refresh rate, a 13 MP rear camera, a 5 MP selfie camera, and a 6,000 mAh battery with support for 44W wired charging. It's powered by the MediaTek Dimensity 6300 SoC, paired with 6/8GB of RAM and 128/256GB of storage. It measures 167.3 x 76.95 x 8.19 mm and weighs 204g. It has a side-mounted capacitive fingerprint scanner embedded into the power button. It's offered in China in black only for CNY 1,499 (approximately $208) with 6GB of RAM and 128GB of storage and CNY 1,999 ($278) with 8GB of RAM and 256GB of storage. It's unclear if it will ever be sold elsewhere.
Phone Arena
6 hours ago
- Phone Arena
China introduces its first domestically made e-beam lithography machine
We've often said that the inability of Chinese foundries and tech manufacturers to obtain Extreme Ultraviolet (EUV) lithography machines is the big reason why China is so far behind in the chips race. Thanks to U.S. and Dutch officials, the one company that makes advanced lithography gear, Dutch firm ASML, cannot ship the latest EUV lithography equipment to China. However, less advanced Deep Ultraviolet (DUV) lithography machines, using older technology, can still be shipped to China. This is important because EUV machines are needed to manufacture chips under 7nm. Foundries like TSMC and Samsung Foundry will be mass producing chips using their 2nm process nodes this year. Lower process node numbers mean that the transistors used are smaller, allowing more to fit into a small space inside a chip. This number is called the Transistor Density and is usually shown as millions or billions of transistors per square millimeter. The higher the transistor density, the more powerful and energy-efficient a chip is. The lithography machine is used to transfer circuitry patterns onto the silicon wafers that serve as the foundation of the chips manufactured by foundries. Deep Ultraviolet (DUV) light has a wavelength of 193 nanometers. EUV, however, uses light with a wavelength of just 13.5 nanometers, which is about 14 times shorter. This shorter wavelength allows EUVs to etch the fine patterns needed for today's intricate chip designs. -Hangzhou Daily But the Chinese have built their first e-beam lithography machine, which they have titled Xizhi. It was created at Zhejiang University in Hangzhou and uses focused electron beams to etch the circuitry patterns on the silicon wafers. The downside is that e-beam lithography cannot produce chips at a large scale like DUV and EUV machines can. But for China, it's any port in a storm when it comes to lithography, and the e-beam lithography works great during the testing phase of production. An ASML built Extreme Ultraviolet lithography machine. | Image credit-ASML A local newspaper, Hangzhou Daily , said on Thursday, "Due to export controls, such equipment has long been out of reach for leading domestic research institutions, including the University of Science and Technology of China and Zhejiang Lab. The delivery of Xizhi is expected to help break this impasse." Xizhi can etch circuit lines as narrow as 8 nm, with a positioning accuracy of 0.6nm. This meets international standards. Discussions with Chinese companies and research institutes interested in Xizhi have begun. The domestically produced e-beam lithography machine is cheaper than similar devices imported into China. This is just the beginning of China's attempt to bypass U.S. restrictions by producing its own chipmaking equipment. There are reports that Huawei has been working on building its own EUV machine. Reportedly, Huawei has been testing a trial EUV machine at its factory in Dongguan. Supposedly, Huawei will aim for trial production later this year with mass production expected to take place in 2026. Should Huawei be able to create an EUV machine, it would be a big deal for China in general and Huawei in particular. It could allow Huawei and China's largest foundry, SMIC, to produce cutting-edge chips that might be able to compete with the silicon designed by U.S. chip design heavyweights like Apple, Qualcomm, and Nvidia. Before the U.S. implemented the sanctions preventing Huawei from obtaining cutting-edge chips, the Chinese manufacturer's HiSillicon chip design unit was TSMC's second-largest customer after Apple. At that time, HiSilicon and thus Huawei had access to TSMC's most cutting-edge process nodes. In fact, the last chip TSMC produced for HiSilicon before U.S. sanctions kicked in was the Kirin 9000 AP. Built using TSMC's 5nm process node, this was the SoC used to power the Huawei Mate 40 series in 2020. After the sanctions went into effect, Qualcomm was given a license from the U.S. Commerce Department allowing it to ship 4G Snapdragon chips to Huawei. In 2023, Huawei stunned the industry by releasing the Mate 60 series powered by the Kirin 9000S. Produced by SMIC, the SoC was built using the foundry's 7nm process node and brought 5G support back to Huawei's flagship phones. With Galaxy AI – port-in & $720 upfront required We may earn a commission if you make a purchase Check Out The Offer
