Delay in retrieving nuclear debris: Take practical, realistic steps toward decommissioning
Operator Tokyo Electric Power Company Holdings, Inc. has announced that it has significantly delayed the start of the full-scale retrieval of melted nuclear fuel from the plant, originally scheduled for the early 2030s, to between 2037 and 2040.
The retrieval of the debris is the most difficult task in the entire decommissioning process. The total amount of debris is estimated to be 880 tons for the Nos. 1, 2 and 3 reactors at the plant, but only about 1 gram was retrieved during two trial attempts last year and this year.
It has been highlighted once again that safely retrieving debris amid high radiation levels is quite challenging.
In addition, in order to begin the major task of retrieving the debris, it will be necessary to remove adjacent buildings to secure space to work and then, a structure to serve as a work platform must also be constructed above the reactor building. A considerable amount of preparation time will inevitably be required.
TEPCO has set a target of completing the decommissioning by 2051, but once it is believed that the retrieval work can be carried out, it will be necessary to review the plan. The current plan was established amid the confusion following the 2011 Great East Japan Earthquake that triggered the meltdown, and it is only natural for it be updated as work progresses.
Meanwhile, TEPCO has decided on specific methods for retrieving the debris. Robotic arms or other devices will be inserted into the containment vessel of the No. 3 reactor from above or from the side, and debris will be retrieved by injecting filler material to solidify it as necessary. At this point, this method appears to be the most feasible.
Last year, the Nuclear Damage Compensation and Decommissioning Facilitation Corporation, a specialized government agency, proposed three different methods, including flooding the entire reactor building. However, enclosing the entire reactor with a new structure and filling it with water was deemed to be difficult, and the submersion method was not adopted.
Since water, which is highly effective in blocking radiation, cannot be used, work must be carried out with greater caution in order to minimize the amount of radiation that workers are exposed to.
The analysis of debris extracted on a trial basis revealed that it was more fragile than expected and could be broken by human force. It may be possible to combine existing technologies such as high-pressure water jets and lasers to cut and suction the debris.
TEPCO has recorded an extraordinary loss of ¥903 billion based on the new plan. The total cost of decommissioning is estimated at ¥8 trillion, but there is a possibility that this figure will increase further.
The outlook for restarting TEPCO's Kashiwazaki-Kariwa nuclear power plant in Niigata Prefecture remains uncertain, and TEPCO is facing a difficult business environment. The company is encouraged to manage its operations with a sense of urgency to fulfill its responsibility for decommissioning the plant in Fukushima Prefecture.
(From The Yomiuri Shimbun, Aug. 10, 2025)
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Asahi Shimbun
19 hours ago
- Asahi Shimbun
Nuke fuel debris from Fukushima more brittle than experts expected
Melted fuel debris retrieved from the Fukushima No. 1 nuclear power plant's No. 2 reactor in November after it was crushed into pieces for analysis (Provided by the Japan Atomic Energy Agency) Melted fuel debris retrieved from a crippled reactor at the Fukushima No. 1 nuclear power plant was found to be more brittle than expected, which experts said may offer new ways to tackle the decommissioning process. The fragment weighs just 700 milligrams. It was removed from the No. 2 reactor containment vessel last November. Plant operator Tokyo Electric Power Co. and the Japan Atomic Energy Agency said July 31 the surprise findings could lead to development of new methods and tools to remove the rest of the melted fuel from the plant's hobbled reactors in years to come. The melted fuel, the first to be removed from any of the crippled reactors at the plant, has been under analysis at the JAEA's Oarai Nuclear Engineering Institute, in Ibaraki Prefecture, and elsewhere. TEPCO and JAEA officials said the fragment broke into smaller lumps and grains when it was whacked with a stainless-steel rod. A compositional study showed that uranium, the key ingredient of the nuclear fuel, makes up the bulk of the sample. The fragment contained zirconium alloy, commonly used in nuclear reactors as fuel cladding, and iron and nickel, typically found in structural components. The materials were likely caught up in the mixture when the molten fuel broke through the bottom of the reactor core. Experts had assumed the piece of fuel debris, with its strong metal content, would be hard to break. The unexpected brittleness is partly due to the porous structure of the sample material, the officials said. PULVERIZATION AS AN OPTION On July 29, TEPCO released a provisional plan to retrieve fuel debris from the plant's No. 3 reactor, starting in fiscal 2037 or later. It aims to accomplish that by pulverizing the melted fuel and removing it from the side of the reactor. TEPCO said it is weighing the option of using a waterjet or laser to pulverize the debris. However, a JAEA official who analyzed a sample of the fragment said there was no way of telling whether the fuel debris buried deeper is of similar consistency. Pulverization has the advantage of reducing debris grain size with little force being applied only if the material crumbles easily, the JAEA official explained. An estimated 880 tons of melted fuel debris remain inside the No. 1, 2 and 3 reactors at the plant. The facility went into a triple meltdown after being swamped by tsunami triggered by the Great East Japan Earthquake of 2011. A second batch of fuel debris, weighing a total of 200 milligrams, was retrieved in April, also from the No. 2 reactor.
Yomiuri Shimbun
6 days ago
- Yomiuri Shimbun
Delay in retrieving nuclear debris: Take practical, realistic steps toward decommissioning
Given the difficult road ahead toward decommissioning the Fukushima No. 1 nuclear power plant, revising the plan at this point seems to be a realistic decision. Operator Tokyo Electric Power Company Holdings, Inc. has announced that it has significantly delayed the start of the full-scale retrieval of melted nuclear fuel from the plant, originally scheduled for the early 2030s, to between 2037 and 2040. The retrieval of the debris is the most difficult task in the entire decommissioning process. The total amount of debris is estimated to be 880 tons for the Nos. 1, 2 and 3 reactors at the plant, but only about 1 gram was retrieved during two trial attempts last year and this year. It has been highlighted once again that safely retrieving debris amid high radiation levels is quite challenging. In addition, in order to begin the major task of retrieving the debris, it will be necessary to remove adjacent buildings to secure space to work and then, a structure to serve as a work platform must also be constructed above the reactor building. A considerable amount of preparation time will inevitably be required. TEPCO has set a target of completing the decommissioning by 2051, but once it is believed that the retrieval work can be carried out, it will be necessary to review the plan. The current plan was established amid the confusion following the 2011 Great East Japan Earthquake that triggered the meltdown, and it is only natural for it be updated as work progresses. Meanwhile, TEPCO has decided on specific methods for retrieving the debris. Robotic arms or other devices will be inserted into the containment vessel of the No. 3 reactor from above or from the side, and debris will be retrieved by injecting filler material to solidify it as necessary. At this point, this method appears to be the most feasible. Last year, the Nuclear Damage Compensation and Decommissioning Facilitation Corporation, a specialized government agency, proposed three different methods, including flooding the entire reactor building. However, enclosing the entire reactor with a new structure and filling it with water was deemed to be difficult, and the submersion method was not adopted. Since water, which is highly effective in blocking radiation, cannot be used, work must be carried out with greater caution in order to minimize the amount of radiation that workers are exposed to. The analysis of debris extracted on a trial basis revealed that it was more fragile than expected and could be broken by human force. It may be possible to combine existing technologies such as high-pressure water jets and lasers to cut and suction the debris. TEPCO has recorded an extraordinary loss of ¥903 billion based on the new plan. The total cost of decommissioning is estimated at ¥8 trillion, but there is a possibility that this figure will increase further. The outlook for restarting TEPCO's Kashiwazaki-Kariwa nuclear power plant in Niigata Prefecture remains uncertain, and TEPCO is facing a difficult business environment. The company is encouraged to manage its operations with a sense of urgency to fulfill its responsibility for decommissioning the plant in Fukushima Prefecture. (From The Yomiuri Shimbun, Aug. 10, 2025)
Yomiuri Shimbun
07-08-2025
- Yomiuri Shimbun
Plastic Waste Covers Bottom of Japanese Waters; Items Found Dating Back to Twentieth Century
A huge amount of plastic waste from Japan and elsewhere has been found on the deep seabed around Japan, according to a probe by the Japan Agency for Marine-Earth Science and Technology (JAMSTEC). Talks by the Intergovernmental Negotiating Committee (INC) to draft a convention to prevent environmental pollution due to plastic waste resumed in Switzerland on Tuesday. The JAMSTEC team that carried out the research stressed the necessity of using fewer plastic products across the globe. The agency conducted the probe from 2019 through spring this year, to ascertain the state of plastic waste pollution on the deep ocean floor. Using the Shinkai 6500, a manned research submarine installed with cameras, researchers probed the ocean floors of the Japan Trench, waters off the Boso Peninsula, Sagami Bay, Suruga Bay, waters off Shikoku and waters off Noto Peninsula. Depths ranged from 800 meters to 7,000 meters. Vast quantities of plastic were found in all these locations. The most polluted areas contained 10,000 to 40,000 plastic items per square kilometer. 'It's deeply shocking that so much plastic waste was confirmed in ocean waters tens of kilometers from the coast,' said Ryota Nakajima, a researcher on the team who specializes in biological oceanography. Of the waste, 70% to 80% was polyethylene bags and plastic shopping bags, and the rest was primarily plastic bottles and food containers. Such waste does not deteriorate quickly in the deep sea due to the lack of light, so some of the waste was identified as products from the Showa era (1926-89). Some product labels showed that the items had drifted on an oceanic current not only from Japan but also from China, South Korea and Southeast Asian countries and regions. The research team also confirmed that a massive amount of microplastics — tiny fragments of plastic products — was dispersed in the seawater. Some plastic products contain chemical substances that are harmful to the human body, and it has been said that people's health may be damaged if they eat fish that have ingested microplastics. The regulation of plastic production has been on the agenda at the INC meeting, which seeks to draft a convention regarding plastic waste, but opinions are divided on the subject. 'The world is connected by the ocean, in which a massive amount of plastic waste is coming and going. To keep the ocean unpolluted, countries and regions must cooperate with each other. It's hopeless otherwise,' Nakajima said. He is paying close attention to the outcome of discussions at the meeting.
