
Crisis-hit SA car makers now face 10% wage hike demands
A potential deadlock over pay increases for South Africa's automotive sector workers risks shutting down an industry that accounts for more than a fifth of the nation's manufacturing output, weighing on an already moribund economy.
The National Union of Metalworkers of South Africa, the country's largest labour group, is demanding employers including BMW South Africa and the local units of Toyota and Ford give workers 10% raises ahead of talks that will agree wages for the next three years.
While that's more than three times the annual inflation rate, it's the union's lowest initial ask in at least four negotiation cycles and comes as several headwinds threaten the long-term viability of manufacturing vehicles and components locally.
They include:
Heightened global uncertainty due to fears of a wider war in the Middle East and higher US tariffs;
South Africa's potential exclusion from a trade deal that gives African nations preferential access to the world's biggest economy;
a shift to electric vehicles in key export markets; and
a flood of cheap imports.
South Africa is the world's most unequal country and its economy has barely grown over the past decade. Still, the automotive sector remains a key driver of output, accounting for about 5% of gross domestic production. Averting a fourth-consecutive deadlock in pay talks and a potential strike by more than 100 000 workers is seen as key for the survival of an industry that has long been hobbled by electricity-supply constraints and logistics challenges.
'The economy isn't performing well and a flat 10% increase along with some of the other challenges will negatively impact the performance of businesses,' said Siyabonga Mthembu, a partner at BDO South Africa.
'International companies operating in South Africa's automotive sector are particularly at risk and will have to consider survival strategies such as market diversification. Sometimes, looking at pay in isolation of other factors at play can be very dangerous and I think all the parties need to sit around a table and understand the entire ecosystem.'
Phakamile Hlubi-Majola, Numsa's spokesperson, has said that asking for an inflation-linked increase is 'unrealistic' because its members are struggling to survive. Representatives for employers associations declined to comment as formal wage negotiations have yet to begin.
Battery production
A sluggish economy has also driven a shift in the new vehicle market, with consumers increasingly buying imported vehicles. Almost 62% of light vehicles purchased in South Africa last year sold for less than R500 000, according to Paulina Mamogobo, the chief economist at Naamsa, The Automotive Business Council.
Industry association data show global trade wars are also weighing on exports, which account for about two thirds of vehicles produced in South Africa. While higher tariffs imposed by the US on imported vehicles and components only took effect in April, shipments to North America had already declined 73.2% year-on-year in the three months through March.
Given changes in the operating environment, key players in the industry have asked the government to bring forward a review of its production-incentive programme and so-called industry master plan to 2025, Mamogobo said. Naamsa is already working with its members on potential evidence-based solutions to address the challenges they are facing, he added.
Lesego Moshikaro-Amani, a senior economist at Trade and Industrial Policy Strategies urged the government to consider adopting policies that promote local battery production for electric vehicles, mineral processing and refining for the automotive industry and measures to 'aggressively attract new manufacturers.'
Local manufacturers could also benefit from producing more affordable vehicles, including two and three wheelers, for export into Africa, she said.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
24 minutes ago
- Yahoo
SendCutSend Doubles Down on Business Tools as More Teams Tap Into Enterprise Features
Company Joins Inc. 5000 List for Third Straight Year RENO, Nev., Aug. 12, 2025 /PRNewswire/ -- As more companies turn to fast, flexible American manufacturing, SendCutSend is seeing growing demand for business tools built for engineering teams, purchasing departments, and production managers. The company offers features like multi-user organization accounts, net-30 payment terms, dedicated account representatives, and built-in design for manufacturability (DFM) checks, streamlining the way businesses order and scale custom parts. These business features, which have been part of SendCutSend's platform for several years, are seeing record adoption across industries. That growth has helped SendCutSend earn #511 on the Inc. 5000 list of the fastest-growing private companies in the U.S. for the third year in a row. "These aren't brand-new tools, they've just become a bigger part of how companies are working with us," said Jim Belosic, CEO and co-founder of SendCutSend. "We're building for speed and simplicity. And the more we can take off our customers' plates, the better." SendCutSend works with thousands of companies, including more than half of the Fortune 500. Its platform supports everything from prototyping to large production runs, with no order minimums and more than 170 materials and finishes available. Most parts ship in 2–3 business days, with rush production now available on select services. Every file uploaded to SendCutSend is automatically checked by the DFM engine, which flags potential manufacturing issues, before a part moves to production. This helps reduce errors and cuts down on delays, especially for teams working through design iterations or repeat runs. SendCutSend was founded in 2018 and operates production facilities in Nevada, Kentucky, and Texas. The company has shipped more than 50 million parts to over 300,000 customers. For more information, visit About SendCutSendSendCutSend is an on-demand, custom sheet metal manufacturing company with facilities in Reno, Nev., Paris, Ky., and Arlington, Texas serving the United States and Canada. Founded by two software engineers frustrated by the lack of access to commercial manufacturing, SendCutSend bridges the gap between quality, speed, affordability and convenience in the manufacturing industry. From its humble beginnings in a garage to landing on the Inc 5000 and Deloitte Technology Fast 500, SendCutSend is proud to now call 59% of the companies in the Fortune 500 customers. SendCutSend offers laser cutting and finishing services for everything from one-off prototypes to sale/assembly ready parts at scale shipped in as little as two days with no minimum quantities. For more information visit or follow on Instagram and YouTube. View original content to download multimedia: SOURCE SendCutSend Error in retrieving data Sign in to access your portfolio Error in retrieving data
Yahoo
an hour ago
- Yahoo
Kenya court says British tycoon's body too decomposed to determine cause of death
A Kenyan magistrate says the cause of death of British tycoon Harry Roy Veevers, whose exhumed body has been in a morgue for 11 years, cannot be determined. David Odhiambo ordered the inquest to be closed, saying that "due to the level of [the body's] decomposition at the time of exhumation - months after his burial" it was too hard to say what led to his death and "nobody can be called to answer any charge". Mr Veevers died on Valentine's Day 2013 in the coastal city of Mombasa. He was buried in accordance with Islamic rites and without a post-mortem. It led to a lengthy legal battle, with his two sons from a previous marriage calling for an investigation into how their father had died. The sons, Richard and Philip Veevers, who were living in the UK, accused their father's second wife, Azra Parveen Din, and her daughters, Helen and Alexandra, of being involved in his death, allegedly so that they could inherit his multi-million dollar estate. They have vehemently denied any wrongdoing. On Tuesday, Mr Odhiambo ruled that because of the state of the the body and "the conflicting reports by the pathologists, government chemist and other experts" no charges could be made. "The investigations relating to the death of the deceased are hereby considered closed unless and until new information comes to light," he added. The magistrate said that Mr Veever's body should be released from the morgue in Mombasa upon payment of the fee that had accumulated for the last 11 years. But it is unclear who the body will be handed over to as Mr Odhiambo said he could not make that decision and instructed both families to seek direction from a different court. At the time of Mr Veever's death in 2013, his second wife, who was living with him in Mombasa, said that her husband had died of natural causes. But his Islamic burial, done quickly after his death, raised suspicions from his sons, who said their father was not Muslim and had been buried under a false name. They also alleged that their father may have been poisoned. In January last year, a magistrates' court ruled that his death was not suspicious. However, his sons successfully challenged that ruling and petitioned the High Court to reopen the inquest and allow them to submit new evidence. The High Court referred the case back to a magistrates' court, citing irregular procedures leading to the initial ruling. Tests conducted after the exhumation revealed traces of a pesticide, although pathologists differed on whether this could have been the cause of his death. Tuesday's ruling mentioned the post-mortem findings that found traces of a poisonous substance on both the remains and soil where his body was exhumed. But it also cited the "conflicting findings by pathologists, government chemist and other experts", as a reason why the cause of death "remains unknown". Additional reporting by Anita Nkonge in Nairobi More stories about Kenya from the BBC: BBC reveals horrific exploitation of children in Kenya sex trade 'They aimed to kill' - BBC identifies security forces who shot Kenya anti-tax protesters 'I felt an unspoken pressure to smile' - Kenyan women in the workplace Starvation alert as children fill Kenya refugee ward after US aid cuts UK soldier accused of raping British woman in Kenya Go to for more news from the African continent. Follow us on Twitter @BBCAfrica, on Facebook at BBC Africa or on Instagram at bbcafrica BBC Africa podcasts Focus on Africa This Is Africa
Yahoo
2 hours ago
- Yahoo
Frauscher begins construction of global manufacturing hub in Mysore, India
Frauscher Sensor Technology India has commenced the construction of a new global manufacturing hub in Mysore, Karnataka. This development is said to highlight the company's commitment to the modernisation of India's railway sector and the government's 'Make in India' initiative. This facility will complement the company's existing manufacturing operations in Austria and is anticipated to be completed by October 2026. The new manufacturing hub will cover an area of 1.55 lakh ft² and is specifically designed to enhance sensor and board production while fostering technological 'innovation' and creating regional employment opportunities. It will feature two levels, with production activities located on the ground floor, while the first floor will accommodate office space, a research and development hub, and two specialised centres of excellence, including the Frauscher Training Centre and the Frauscher Experience Centre. The Frauscher Training Centre will serve as a dedicated venue for external training programmes, allowing railway professionals, partners, and customers to gain practical experience with Frauscher solutions and partner on real-world operational challenges. The Frauscher Experience Centre will showcase the company's advanced solutions, providing visitors with an in-depth understanding of the technology and its practical applications in the real world. Furthermore, the localised R&D hub aims to deliver customised product innovations tailored for the Indian Railways. This initiative is said to further enhance Frauscher's role as a dependable partner in the railway sector, with the ability to serve markets in Southeast Asia, the Middle East, and other emerging global regions from India. Frauscher Sensor Technology India managing director Akhilesh Yadav said: 'This new facility marks a significant step in our long-term strategy to support India's evolving rail ecosystem as well as markets beyond. 'It strengthens our ability to deliver at scale, drive local innovation, and respond faster to market needs. 'Our mission is clear: put operators in control, enhance network safety and efficiency, and build systems that are ready for the future of the Indian railway network.' The Mysore facility will incorporate sustainability features such as 100% wastewater recycling, rainwater harvesting, and groundwater recharge through percolation pits. Additionally, rooftop solar panels will be installed to generate clean energy for the site. In July 2025, Wabtec finalised an agreement to acquire Frauscher Sensor Technology Group for €675m ($794.6m) in cash. This acquisition is intended to enhance Wabtec's Digital Intelligence business by incorporating Frauscher's railway signalling technologies. "Frauscher begins construction of global manufacturing hub in Mysore, India" was originally created and published by Railway Technology, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data