logo
Inflation below projections could open up policy space, India cenbank chief tells Business Standard

Inflation below projections could open up policy space, India cenbank chief tells Business Standard

Yahoo6 hours ago

MUMBAI (Reuters) -Inflation below the central bank's current projections could open up policy space, India's central bank chief Sanjay Malhotra told Business Standard newspaper in an interview, adding that incoming data will be watched closely to strike "the right growth-inflation balance".
The Reserve Bank of India's Monetary Policy Committee cut its policy repo rate by a steeper-than-expected 50 basis points earlier this month but changed its stance to 'neutral' from 'accommodative', prompting analysts to forecast the end of the rate-cutting cycle.
The change in stance "does not imply an immediate reversal in the policy cycle", said Malhotra in the interview published on Tuesday. "It is a reflection of how much more space it has to support growth. We will continue to watch the incoming data on inflation and growth and take a call," he said.
The central bank has maintained large surplus liquidity in the banking system since Malhotra took charge in December. This, he said, was to ensure that productive needs of the economy are met.
"We have robust regulations and effective supervision to ensure that credit is deployed prudentially," Malhotra said in response to a question on whether the surplus liquidity could fuel an asset price bubble.
The surplus liquidity has pushed India's weighted average call rate - the operative rate - below the policy repo rate.
The central bank will weigh the trade-off between allowing the call rate to trade closer to the floor of the interest rate corridor for better transmission of lower rates or pushing it back towards the repo rate, Malhotra said.
Liquidity fine-tuning operations such as the variable rate reverse repo (VRRR) auctions, which allow banks to park surplus liquidity with the central bank, do not impact durable liquidity, Malhotra said.
Last week, Reuters reported that the central bank would consider introducing VRRR auctions to align the call rate with the repo rate and use the cash reserve ratio (CRR) more frequently to adjust liquidity.
At its policy review, the RBI cut the CRR by 100 basis points to 3% in a surprise move.
"Higher the reserves, lower is the money supply available for credit and higher is the cost for banks," said Malhotra, adding that the CRR reduction should be seen in that context.
"It would not be correct to infer the CRR will be used for frequent liquidity management," he said.

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Discover ZW3D 2026: Turn Every Day into a Leap towards Creative Innovation
Discover ZW3D 2026: Turn Every Day into a Leap towards Creative Innovation

Yahoo

time12 minutes ago

  • Yahoo

Discover ZW3D 2026: Turn Every Day into a Leap towards Creative Innovation

GUANGZHOU, China, June 17, 2025 /PRNewswire/ -- ZWSOFT, a trusted provider of all-in-one CAx solutions, announced the release of ZW3D 2026, the latest annual update to its flagship 3D solution. Informed by feedback from over 2,800 users worldwide, this version brings several significant enhancements. ZW3D 2026 introduces more specialized tools for general machinery design, enabling users to solve complex, industry-specific challenges with enhanced precision. It also offers faster performance and a smoother user experience. Upgraded data conversion and 2D–3D collaboration features improve workflow continuity across formats and platforms. New modules—such as CFD Simulation and ZWTeammate—further strengthen the platform as a fully integrated 3D CAD/CAE/CAM/Collaboration solution. Together, these advancements reflect ZWSOFT's commitment to empowering end-to-end product development through a unified, intelligent design environment. Tailored Enhancements for General Machinery Design For manufacturers in general machinery, design precision directly affects product performance and durability. A long-time ZW3D user—an industry-leading CNC machine tool maker—struggled with time-consuming modeling of lead screw threads. Because traditional flag threads couldn't meet simulation requirements, engineers had to create real threads manually—taking over 10 minutes per part and often leading to errors. ZW3D 2026 solves this with real-thread modeling and a built-in library of standardized slot features. Engineers can now generate accurate, simulation-ready threads in seconds—even for custom specifications—boosting fatigue life prediction accuracy from 75% to 95% and cutting modeling time by over 90%.* Complex sheet metal design for consumer products is often significantly influenced by industrial styling demands. While stylists strive to create visually appealing forms, their frequent changes can complicate downstream engineering. Structural engineers must repeatedly revise detailed layouts, making manual conversion time-consuming and error-prone. ZW3D 2026 now renews one-click conversion from solid models to sheet metal parts, with associative updates that reflect any design changes. Engineers also benefit from new specialized features such as cutouts, louvers, and embosses, simplifying the creation of complex sheet metal structures. In real production cases—like appliance enclosures—overall design time has been cut by up to 50%.* Smarter and Faster Design Workflows A precision machine tool manufacturer working with ZWSOFT set out to develop more than 7,500 parts in three months, where efficiency was key to success. Assembly and motion analysis accounted for 35% of the workload, with component selection and installation consuming significant time. Preparing models for motion simulation added further complexity. To address these issues, ZW3D 2026 introduces intelligent fasteners, copy with constraints, smart constraints, and smart mirror, enabling batch installation and one-click conversion of assembly constraints into simulation joints. These upgrades led to a 50% improvement in assembly efficiency*, reducing component installation from two full days to just one hour. Once 3D design is complete, standardized 2D drawing output becomes a major bottleneck—especially in the non-standard equipment sector, where it can consume up to 30% of the total project cycle. In one case, a team of 40–50 engineers produced nearly 10,000 drawings per month, with most engineers handling 10–20 drawings per day. The bulk of their time was spent on 3D view projections and manual dimensioning, frequently leading to long hours and inconsistent results. To streamline this workflow, ZW3D 2026 enhances AI-powered tools for automated drawing generation and intelligent annotation. Engineers can define templates and standards once, then batch-generate dimensions and insert preconfigured process tables with ease—reducing manual effort and ensuring consistency across outputs. Software performance has also seen significant gains. In a 150,000-part factory layout project, model loading time has been reduced from one minute to 47 seconds*, and drawing view projection from five minutes to one, thanks to the optimized projection engine in ZW3D 2026. To further support daily productivity, in its latest version, ZW3D enhances the user experience with new micro-panel interfaces, a data-driven workspace, and AI-powered command prediction—all designed to help engineers stay focused and move faster throughout the design process. Seamless Interoperability and 2D–3D Integration CAD models are long-term digital assets, encapsulating a company's design intent and process knowledge. As organizations adopt new design platforms, the ability to migrate and reuse legacy data becomes essential. With robust parametric modeling and feature recognition capabilities, ZW3D 2026 leverages the upgraded IPX 2.0 engine to enable accurate, feature-level data exchange across mainstream CAD formats—achieving over 90% conversion accuracy for SolidWorks files and 85% for Creo files—ensuring smooth collaboration in multi-software environments. To further boost productivity and design consistency, ZW3D 2026 introduces Associative Updates to Sync 2D Drawings With 3D Models. In many small and mid-sized enterprises, 3D modeling is still followed by manual 2D drafting—a process that often results in duplicated effort and data mismatches. With this new integration, any change made to a 3D model can now automatically update the corresponding 2D drawings, improving accuracy and eliminating repetitive redrawing. This feature has already delivered measurable results. In one injection molding project, the customer iterated over ten times using ZW3D for modeling and ZWCAD for detailing. Previously, each update required manual revisions to multiple drawings and up to four hours of rework. With the latest version, the same updates take just three minutes, thanks to real-time 2D–3D synchronization. Advancing Integrated CAx to New Heights With ZW3D 2026, ZWSOFT continues to expand its capabilities as a unified design and engineering platform. The addition of two new modules—CFD Simulation and ZWTeammate—further enhances ZW3D as a fully integrated CAD/CAE/CAM/Collaboration solution. CFD Simulation Now Integrated Seamlessly ZW3D 2026 now includes native CFD Simulation-Phoenics, allowing engineers to perform fluid and thermal analysis directly within the design environment. This integration eliminates the need for external tools and streamlines validation early in the design process. ZWTeammate for Intuitive and Efficient Engineering Collaboration ZWTeammate enables seamless collaboration and efficient data management within the ZW3D platform. From task coordination and revision tracking to controlled data publishing, it helps teams stay organized and aligned—all within the design environment. Together with the enhanced CAM module, these new modules reinforce ZW3D's mission to unify design, simulation, manufacturing, and collaboration—improving productivity across the entire product development journey, from conception to production. ZW3D 2026 Marks a Major Milestone ZW3D 2026 brings focused enhancements for general machinery design, intelligent tools for greater design efficiency, improved data interoperability, and deeper 2D–3D integration—all geared toward addressing real-world engineering needs. With this release, ZWSOFT continues to advance its strategy of delivering a fully integrated CAx solution centered on ZW3D—unifying design, simulation, and manufacturing to empower more streamlined and intelligent product development. For more details and to enjoy a 30-day free trial, please visit ZWSOFT's website: *Disclaimer These results are based on internal tests comparing ZW3D 2026 with ZW3D 2025. Actual performance may vary depending on specific application scenarios. About ZWSOFT Since 1998, ZWSOFT's all-in-one CAx (CAD/CAE/CAM) solutions have helped professionals bridge the gap between concept and creation. By uniting design, simulation, and manufacturing in one integrated platform, we empower architects, engineers, and designers to streamline complex projects at a fair price. This approach accelerates development cycles and minimizes costs without compromising quality. Over 1.4 million users in 90+ countries—including 149 Fortune 500 corporations—trust ZWSOFT's 25+ years of expertise to drive innovation. Whether it's pioneering product design in manufacturing or delivering advanced solutions in the AEC sector, we remain dedicated to turning ambitious ideas into reality and empowering sustainable innovation worldwide. View original content to download multimedia: SOURCE ZWSOFT CO., LTD. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data

India's PNG Jewellers launches lightweight jewellery brand as gold prices surge
India's PNG Jewellers launches lightweight jewellery brand as gold prices surge

Yahoo

time28 minutes ago

  • Yahoo

India's PNG Jewellers launches lightweight jewellery brand as gold prices surge

MUMBAI (Reuters) -India's P N Gadgil Jewellers on Tuesday launched Litestyle, a new sub-brand for lightweight and lower-carat jewellery, as record gold prices push consumers towards more budget-friendly options. Gold prices have jumped sharply in the past few months, but consumers' budgets haven't risen in the same proportion, leading them to look for budget-friendly options, Saurabh Gadgil, chairman of the Pune-based company, told Reuters. The lightweight jewellery segment is growing rapidly at around 30% per annum, and the company will launch 12 Litestyle stores this year to tap into this segment, Gadgil said. Local gold prices, which hit a record high of 101,078 rupees per 10 grams on Monday, have risen 29% so far in 2025, after rising 21% in 2024. Consumers are slowly adjusting to higher prices, Gadgil said, forecasting a 30% to 35% year-on-year jump in revenue in the fiscal year ending March 2026. Investment demand for gold and silver has been rising as both metals are yielding better returns than other asset classes, he added.

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into the world of global news and events? Download our app today from your preferred app store and start exploring.
app-storeplay-store