I thought this was the most boring kitchen gadget ever created, but now I can't imagine my life without it
It goes without saying that once you crack the jargon, sourdough starter proofing is the trickiest part of the baking journey. And then you need to calculate the bulk fermentation time. And then the whole hydration discourse? Honestly, no wonder I was scared of sourdough until very recently (despite making a weekly loaf since January this year).
The reason why I was scared of my sourdough was that I didn't understand bulk fermentation. I used to proof sourdough in the oven with the light on. Now, I bulk proof my sourdough in my favorite innovation of 2025: the Sourhouse DoughBed.
The Sourhouse DoughBed is simple on paper: a glass bowl with a heated mat and a cork lid. But it's actually a life-changing product. I've not made a bad sourdough loaf since getting it, and I don't think I'll ever be able to bake without it now.
It's usually recommended that you bulk ferment sourdough at a temperature of about 78°F. As it rarely gets to that temperature in the U.K., I had to proof my dough in the oven with the light on. Unfortunately, that meant the dough often got too hot. This resulted in either overproofed or dried-out dough, which is undesirable.
Now, with the DoughBed, that's a thing of the past. The DoughBed keeps my sourdough at about 78°F indefinitely, which is optimal for consistent, even proofing.
As you can see, the DoughBed's glass proofing bowl is wide and long, which means it has a large surface area against the heating mat. Naturally, this results in an even and consistent proof. You can even watch the fermentation bubbles form during proofing!
But when is proofing finished? Usually, you're supposed to bulk ferment until your dough has doubled in size. Sourhouse provides some 'tattoos' (stickers) you can stick on the side of the DoughBed's glass proofing bowl. These stickers have volume levels so you can easily check when your dough is ready to go.
Get instant access to breaking news, the hottest reviews, great deals and helpful tips.
Although the DoughBed has a very specific use case, it's not restricted to just that. The glass proofing bowl is made of borosilicate glass and is oven-proof up to 550°F. So while you can mix, proof, and bake your sourdough in the same glass bowl, it also doubles up as an emergency baking dish during busy periods.
Imagine it's Christmas or Thanksgiving — you need to make one more tray of mac and cheese or casserole, but you don't have any more baking dishes. Ta-da! The DoughBed proofing dish comes in clutch.
It's dishwasher safe, too, so the cleanup will be as straightforward as the baking itself. Although if you've been using the 'tattoo' (a sticker), you'll need to take that off before oven baking, as it is definitely not oven-proof.
The only downside of the DoughBed is that it's very expensive for what it is. It's basically an ovenproof baking dish, an electric heating mat, and a lid, for $279. You can easily wrangle your own DIY DoughBed with a glass dish, some kind of electric heater (make sure it can go as low as 78°F, though) and a lid.
But if you want to get the easiest, most foolproof, simplest method, then the DoughBed is the clear winner. I wouldn't really want to have to figure out how to balance a baking dish on an electric blanket. Come to think of it — wouldn't that be a fire hazard?
If I were you, I'd take the easy (and safe) route by using the Sourhouse DoughBed. This marvelous product takes all the headache out of proofing dough — not just sourdough — and is a massive amount cheaper than getting a proofing drawer installed in your oven.
Now I've made perfect loaves with the DoughBed, I can't ever go back.
Follow Tom's Guide on Google News to get our up-to-date news, how-tos, and reviews in your feeds. Make sure to click the Follow button.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
a day ago
- Yahoo
Experts suggest school holidays shake-up
Researchers in the South West have suggested school summer holidays should be shortened, along with lengthening half-terms. A report on tackling post-pandemic education inequalities, which forms part of a project funded by the Nuffield Foundation, said it was time to consider a reform to school calendars. Experts in the report said reducing the six-week summer holiday to four weeks and introducing an extra week to half-term breaks could help tackle "educational divides" which have grown since the Covid-19 pandemic. The Department for Education said the academic year was structured to provide plenty of time for holidays and schools had flexibility to plan term dates. Experts said they believed benefits achieved through changing the holiday structure would include balancing out childcare costs for parents and improving the wellbeing of pupils and teachers. The report also said spreading the holidays more evenly across the academic year could prevent "learning loss" - a term experts used to describe difficulties pupils when going back to school after the summer break. More news stories for Cornwall Listen to the latest news for Cornwall Prof Lee Elliot Major, from the University of Exeter, one of the report's authors, said the structure of the academic year dated back to Victorian times and it was "time to review this". He said: "We need bold ideas and ultimately trying to find ways of levelling that education playing field so all children from all backgrounds can prosper in school." Mother-of-three Helen Eaton, who runs a blog called Cornwall with the Kids, said her family enjoyed the six weeks of summer holidays. However, she said she understood other families had different issues to deal with during the break and some changes to the structure could be beneficial. Ms Eaton said: "I know a lot of people in Cornwall work in the tourism industry, so maybe when it's quieter at Christmas or October, it might benefit people to have an extra week off." She added her children - aged 11, eight and four - had been able to learn things during the holidays and put their skills from school into practice. "Sometimes you can go out and about and the children are actually learning all the time," Ms Eaton said. "They've learned how to paddleboard and fish, and sometimes you do an activity and maths and English come into that." Follow BBC Cornwall on X, Facebook and Instagram. Follow BBC Devon on X, Facebook and Instagram. Send your story ideas to spotlight@ More on this story Should school summer holidays be shorter? The schools still deciding on two week half term Cost of summer holiday clubs rises to £1,076 a child Related internet links Nuffield Foundation Department for Education
San Francisco Chronicle
a day ago
- San Francisco Chronicle
Letters: S.F. firefighters answer call when alarm sounds. That's why they deserve what they're paid
Regarding 'S.F. firefighter overtime pay is over the top. Why does the city allow this dubious practice?' (Letters to the Editor, Aug. 8): When I was 9 in the early '60s, Mom made the mistake of showing me and my three sisters what Dad did for work at his firehouse in the Mission District. We heard the sirens start, and we followed the noise to a burning building. Mom never took the family to watch Dad work again. The nightmare of flames and the immediacy of death their father confronted was not something she wanted her children to know about. One Thanksgiving, long after Dad had retired, a fire broke out near our home in the Excelsior. Dad was just about to carve the turkey. As the sirens approached, he went out to observe. The firefighters responding were shorthanded, and all were busy. Dad noticed a hose wasn't connected to a hydrant. He stretched it and linked it to the hydrant. Dad got a big smile and thanks from the firefighter who noticed. I was never prouder of my dad. Dad died in 1983 from cancer due to inhalation of smoke on the job. Letter writer Beth Brown should realize that the pay for San Francisco firefighters she decries as an 'insatiable appetite' and 'greed' is well-deserved. These heroic men and women work shifts of 24 hours on, 48 off, with death tugging at their elbows each time the alarm sounds. John R. Wallace, Mill Valley Hold PG&E accountable The primary reason is the lack of any accountability in the rate-making process from the California Public Utilities Commission, which regulates the investor-owned utilities, like PG&E. The state's utilities have done everything they can to increase their profits by building capital-intensive, and in many cases, unnecessary transmission and distribution infrastructure. At the same time, the utilities have used their political muscle to suppress the use of grid-enhancing technologies, methods to expand the capacity of the grid with much less capital-intensive strategies. Because utilities get a guaranteed rate of return on capital deployed, they have no incentive to use less expensive methods, so ratepayers end up taking it on the chin. And despite what the story said, we can do something about it by supporting consumer advocacy groups like The Utility Reform Network and the Solar Rights Alliance. Rick Brown, Petaluma Dems have to fight Regarding 'California can never win a race to the bottom with Trump on redistricting ' (Open Forum, Aug. 10): Taking the high road, as Michelle Obama once stated, has always been a losing political strategy for Democrats. Stating that 'turning the other cheek would be real gangster' shows that it's time for Joe Matthews to retire from political writing. He's not reading the political landscape. Republicans, conservatives and corporations have been beating the Democrats and progressives over the head with name-calling and falsehoods for decades. The right wing is winning at the ballot box and in the courts. Look who controls the U.S. Capitol and most statehouses. It's time Democrats fight back, even if it requires getting dirty. Michael Santos, Antelope, Sacramento County Spread the music
Tom's Guide
2 days ago
- Tom's Guide
I thought this was the most boring kitchen gadget ever created, but now I can't imagine my life without it
Baking sourdough is hard. There's so much jargon that it can feel overwhelming before you've even made a sourdough starter. I was overwhelmed with the whole concept of sourdough bannetons (would an Amazon banneton suffice, or should I get a Flourside banneton?), bulk fermentation (is that the same as counter proofing?), and shaping (what do you mean, I need to draw patterns in my bread?). It goes without saying that once you crack the jargon, sourdough starter proofing is the trickiest part of the baking journey. And then you need to calculate the bulk fermentation time. And then the whole hydration discourse? Honestly, no wonder I was scared of sourdough until very recently (despite making a weekly loaf since January this year). The reason why I was scared of my sourdough was that I didn't understand bulk fermentation. I used to proof sourdough in the oven with the light on. Now, I bulk proof my sourdough in my favorite innovation of 2025: the Sourhouse DoughBed. The Sourhouse DoughBed is simple on paper: a glass bowl with a heated mat and a cork lid. But it's actually a life-changing product. I've not made a bad sourdough loaf since getting it, and I don't think I'll ever be able to bake without it now. It's usually recommended that you bulk ferment sourdough at a temperature of about 78°F. As it rarely gets to that temperature in the U.K., I had to proof my dough in the oven with the light on. Unfortunately, that meant the dough often got too hot. This resulted in either overproofed or dried-out dough, which is undesirable. Now, with the DoughBed, that's a thing of the past. The DoughBed keeps my sourdough at about 78°F indefinitely, which is optimal for consistent, even proofing. As you can see, the DoughBed's glass proofing bowl is wide and long, which means it has a large surface area against the heating mat. Naturally, this results in an even and consistent proof. You can even watch the fermentation bubbles form during proofing! But when is proofing finished? Usually, you're supposed to bulk ferment until your dough has doubled in size. Sourhouse provides some 'tattoos' (stickers) you can stick on the side of the DoughBed's glass proofing bowl. These stickers have volume levels so you can easily check when your dough is ready to go. Get instant access to breaking news, the hottest reviews, great deals and helpful tips. Although the DoughBed has a very specific use case, it's not restricted to just that. The glass proofing bowl is made of borosilicate glass and is oven-proof up to 550°F. So while you can mix, proof, and bake your sourdough in the same glass bowl, it also doubles up as an emergency baking dish during busy periods. Imagine it's Christmas or Thanksgiving — you need to make one more tray of mac and cheese or casserole, but you don't have any more baking dishes. Ta-da! The DoughBed proofing dish comes in clutch. It's dishwasher safe, too, so the cleanup will be as straightforward as the baking itself. Although if you've been using the 'tattoo' (a sticker), you'll need to take that off before oven baking, as it is definitely not oven-proof. The only downside of the DoughBed is that it's very expensive for what it is. It's basically an ovenproof baking dish, an electric heating mat, and a lid, for $279. You can easily wrangle your own DIY DoughBed with a glass dish, some kind of electric heater (make sure it can go as low as 78°F, though) and a lid. But if you want to get the easiest, most foolproof, simplest method, then the DoughBed is the clear winner. I wouldn't really want to have to figure out how to balance a baking dish on an electric blanket. Come to think of it — wouldn't that be a fire hazard? If I were you, I'd take the easy (and safe) route by using the Sourhouse DoughBed. This marvelous product takes all the headache out of proofing dough — not just sourdough — and is a massive amount cheaper than getting a proofing drawer installed in your oven. Now I've made perfect loaves with the DoughBed, I can't ever go back. Follow Tom's Guide on Google News to get our up-to-date news, how-tos, and reviews in your feeds. Make sure to click the Follow button.
