Why certain aircrafts make a distinctive ‘barking' or ‘grinding sound' before takeoff
Passengers on particular aircraft, like Airbus A320 and Airbus A330, often hear a distinctive 'barking sound' that closely resembles the noise of a saw. Often, the grinding noise can be disturbing, sounding like a strange sound, or you may feel concerned about your safety. If you have always been interested in learning more about this unique sound or find it fascinating, we have you covered.
It's just a routine aircraft mechanism, explained Colonel Rajgopalan, founder of Aviation Training India.
It is the sound of a hydraulic pump that operates automatically to maintain the pressure. This occurs during the single-engine taxi operations and is caused by the Power Transfer Unit (PTU).
According to Rajgopalan, to save fuel during taxing and before takeoff, an aircraft switches on one engine and continues taxing when it is near a holding point before takeoff. 'When one engine is operating, then only one hydraulic system is working. The other one (which is yet to be switched on) becomes unbalanced, creating pressure. That is the reason why this particular sound occurs,' he said.
In simple terms, when the PTU activates, it rapidly switches between the two hydraulic systems, creating a reciprocating flow of hydraulic fluid. This reciprocating action generates the barking or grinding noise.
Can you hear the sound? (Photo: Freepik)
The sound is not a sign of any engine problems or danger, and it's a regular part of the A320's hydraulic system operation. 'It is nothing to be worried about. It is part of the aircraft's mechanism,' asserted Rajgopalan.
The PTU onboard the A320 is a hydraulically powered unit that exists to maintain a minimum pressure across two of the aircraft's hydraulic systems, unlike traditional motors or pumps, which are most likely electrically operated, said Rajgopalan.
View this post on Instagram
A post shared by Soumyaayaaa (@soumyatiwarii_)
What more should you know?
Rajgoapalan also mentioned that because of the PTU's location on the aircraft, you're more likely to hear the sound if you sit close to the aircraft's wings. According to him, the PTU is located near the main landing gear, which is positioned close to the wings, allowing passengers to distinctly hear the sound.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Business Standard
3 days ago
- Business Standard
Sika Interplant soars 56% in three days, hits record high
Sika Interplant Systems surged 14.39% to Rs 1287.25, extending gains for the third consecutive session. The stock has soared 56% in just three days and hit a record high of Rs 1,347.70 intraday. Over the past year, it has delivered a staggering 164.09% return. The surge comes on the heels of an announcement made on Tuesday (3 June), where the company revealed it had signed a license agreement with Goodrich Actuation Systems (part of Collins Aerospace). The deal allows SIKA to carry out maintenance, repair, and overhaul (MRO) services for key flight control components used in Airbus A320/A321 aircraft. The license applies to aircraft registered in India and select neighboring countries, reinforcing SIKAs focus on expanding its regional MRO capabilities. Sika Interplant Systems operates across engineered projects and systems, interconnect solutions and electrical module integration, MRO services, and value-added distribution. On a consolidated basis, net profit of Sika Interplant Systems rose 30.74% to Rs 7.91 crore while net sales rose 23.84% to Rs 46.02 crore in Q4 March 2025 over Q4 March 2024.
India Today
16-05-2025
- India Today
Massive fire in Jacksonville airport's parking garage, over 30 flights delayed
A massive fire broke out in the parking garage of Florida's Jacksonville International Airport on Friday, prompting the authorities to close the facility, The Mirror reported."Due to a fire in the Hourly Garage, the airport is currently closed. JFRD is on-site working the issue. JSO has blocked inbound and outbound road access to the airport. Additional details will be forthcoming soon," the airport authorities posted on of the incident showed a massive blaze that broke out in the multistory parking garage, engulfing several cars parked inside the cause of the fire was not immediately known. Jacksonville Fire and Rescue crews swung into action and launched an operation to douse the a result of the fire and the subsequent closure of the airport, over 30 flights were delayed, the report added. There were no reports of any injuries or casualties in the several passengers hoping to fly to their destinations on time, made their resentment known with posts on social media."Walking out of Jacksonville Airport and the parking structure is on fire. Tires exploding, but people thought bombs are going off. No bombs just tires," an X user a month ago, a Delta Air Lines flight was evacuated at Orlando International Airport when one of its engines caught fire. The aircraft, Flight 1213, was preparing to depart from the gate at about 11:15 am on April 21 when the fire began, as reported by the Federal Aviation Administration (FAA).The plane, an Airbus A330, was en route to Hartsfield-Jackson Atlanta International Airport with 282 passengers, 10 flight crew members, and 2 pilots aboard.
Indian Express
08-05-2025
- Indian Express
Why certain aircrafts make a distinctive ‘barking' or ‘grinding sound' before takeoff
Passengers on particular aircraft, like Airbus A320 and Airbus A330, often hear a distinctive 'barking sound' that closely resembles the noise of a saw. Often, the grinding noise can be disturbing, sounding like a strange sound, or you may feel concerned about your safety. If you have always been interested in learning more about this unique sound or find it fascinating, we have you covered. It's just a routine aircraft mechanism, explained Colonel Rajgopalan, founder of Aviation Training India. It is the sound of a hydraulic pump that operates automatically to maintain the pressure. This occurs during the single-engine taxi operations and is caused by the Power Transfer Unit (PTU). According to Rajgopalan, to save fuel during taxing and before takeoff, an aircraft switches on one engine and continues taxing when it is near a holding point before takeoff. 'When one engine is operating, then only one hydraulic system is working. The other one (which is yet to be switched on) becomes unbalanced, creating pressure. That is the reason why this particular sound occurs,' he said. In simple terms, when the PTU activates, it rapidly switches between the two hydraulic systems, creating a reciprocating flow of hydraulic fluid. This reciprocating action generates the barking or grinding noise. Can you hear the sound? (Photo: Freepik) The sound is not a sign of any engine problems or danger, and it's a regular part of the A320's hydraulic system operation. 'It is nothing to be worried about. It is part of the aircraft's mechanism,' asserted Rajgopalan. The PTU onboard the A320 is a hydraulically powered unit that exists to maintain a minimum pressure across two of the aircraft's hydraulic systems, unlike traditional motors or pumps, which are most likely electrically operated, said Rajgopalan. View this post on Instagram A post shared by Soumyaayaaa (@soumyatiwarii_) What more should you know? Rajgoapalan also mentioned that because of the PTU's location on the aircraft, you're more likely to hear the sound if you sit close to the aircraft's wings. According to him, the PTU is located near the main landing gear, which is positioned close to the wings, allowing passengers to distinctly hear the sound.
