
The three reasons why beef is so expensive in the U.S.
Hamburger patties and steaks are getting even more expensive – which is bad news if you are looking to fire up the grill this summer.
And experts say consumers shouldn't expect much relief soon, either.
The average price of a pound of ground beef rose to $6.12 in June, up nearly 12 per cent from a year ago, according to U.S. government data. The average price of all uncooked beef steaks rose eight per cent to $11.49 per pound.
Beef prices have been steadily rising over the past 20 years because the supply of cattle remains tight while beef remains popular.
In fact, the U.S. cattle herd has been steadily shrinking for decades. As of Jan. 1, the U.S. had 86.7 million cattle and calves, down eight per cent from the most recent peak in 2019. That's the lowest number of cattle since 1951, according to the U.S. Department of Agriculture.
Many factors including drought and cattle prices have contributed to that decline. And now the emergence of a pesky parasite in Mexico and the prospect of widespread tariffs may further reduce supply and raise prices.
Here's a look at what's causing the price of beef to rise.
Smaller herds
The American beef industry has gotten better at breeding larger animals, so ranchers can provide the same amount of beef with fewer cattle, said David Anderson, a livestock economist at Texas A&M.
Then in 2020, a three-year drought began that dried out pastures and raised the cost of feed for cattle, according to the American Farm Bureau. Drought has continued to be a problem across the West since then, and the price of feed has put more pressure on ranchers who already operate on slim profit margins.
In response, many farmers slaughtered more female cattle than usual, which helped beef supplies in the short term but lowered the size of future herds. Lower cattle supplies has raised prices.
In recent years cattle prices have soared, so that now animals are selling for thousands of dollars apiece. Recent prices show cattle selling for more than $230 per hundredweight, or hundred pounds.
Those higher prices give ranchers more incentive to sell cows now to capture profits instead of hanging onto them for breeding given that prices for those calves in the years ahead may decrease, Anderson said.
'For them, the balance is, 'Do I sell that animal now and take this record high check?' Or 'do I keep her to realize her returns over her productive life when she's having calves?'' Anderson said. 'And so it's this balancing act and so far the side that's been winning is to sell her and get the check.'
Disease dilemma
The emergence of a flesh-eating pest in cattle herds in Mexico has put extra pressure on supply because officials cut off all imports of cattle from south of the border last year. Somefour per cent of the cattle the U.S. feeds to slaughter for beef comes from Mexico.
The pest is the New World screwworm fly, and female cows lay eggs in wounds on warm-blooded animals. The larvae that hatch are unusual among flies for feeding on live flesh and fluids instead of dead material. American officials worry that if the fly reaches Texas, its flesh-eating maggots could cause large economic losses as they did decades ago before the U.S. eradicated the pest.
Agricultural economist Bernt Nelson with the Farm Bureau said the loss of that much cattle is putting additional pressure on supply that is helping drive prices higher.
Tariff trouble
President Donald Trump's tariffs have yet to have a major impact on beef prices but they could be another factor that drives prices higher because the U.S. imports more than 4 million pounds of beef every year.
Much of what is imported is lean beef trimmings that meatpackers mix with fattier beef produced in the U.S. to produce the varieties of ground beef that domestic consumers want. Much of that lean beef comes from Australia and New Zealand that have only seen a 10 per cent tariff, but some of it comes from Brazil where Trump has threatened tariffs as high as 50 per cent.
If the tariffs remain in place long-term, meat processors will have to pay higher prices on imported lean beef. It wouldn't be easy for U.S. producers to replace because the country's system is geared toward producing fattier beef known for marbled steaks.
Prices will likely stay high
It's the height of grilling season and demand in the U.S. for beef remains strong, which Kansas State agricultural economist Glynn Tonsor said will help keep prices higher.
If prices remain this high, shoppers will likely start to buy more hamburger meat and fewer steaks, but that doesn't appear to be happening broadly yet — and people also don't seem to be buying chicken or pork instead of beef.
Nelson said that recently the drought has eased — allowing pasture conditions to improve — and grain prices are down thanks to the drop in export demand for corn because of the tariffs. Those factors, combined with the high cattle prices might persuade more ranchers to keep their cows and breed them to expand the size of their herds.
Even if ranchers decided to raise more cattle to help replace those imports, it would take at least two years to breed and raise them. And it wouldn't be clear if that is happening until later this fall when ranchers typically make those decisions.
'We've still got a lot of barriers in the way to grow this herd,' Nelson said. Just consider that a young farmer who wants to add 25 bred heifers to his herd has to be prepared to spend more than $100,000 at auction at a time when borrowing costs remain high.
There is typically a seasonal decline in beef prices as grilling season slows down into the fall, but those price declines are likely to be modest.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Auto Blog
29 minutes ago
- Auto Blog
Amazon Is Selling a ‘Bright' $26 Cordless Work Light for 42% Off, and Shoppers Are ‘Extremely Impressed'
By signing up I agree to the Terms of Use and acknowledge that I have read the Privacy Policy . You may unsubscribe from email communication at anytime. Autoblog brings you car news; expert reviews and exciting pictures and video. Research and compare vehicles, too. Project F173M is the next mid-engine hybrid supercar from Ferrari. View post: Say Hello To The Next Ferrari SF90, Whatever It's Called View post: Walmart Is Selling a 'Powerful' $90 Cordless Weed Wacker for $44, and Shoppers Say 'It's a Winner' The Mulliner division's new colors and materials unlock a new level of creativity. The Japanese automaker says they are making progress in its restructuring efforts. Autoblog aims to feature only the best products and services. If you buy something via one of our links, we may earn a commission. Creating the perfect workspace is no easy feat. But it is possible with the help of a few essential products that will help you complete your DIY projects and at-home repairs in no time. Besides a dedicated workbench and proper storage, you'll also need a versatile work light. That's where the Livowalny Cordless LED Work Light comes in. The small but mighty device is now on sale at Amazon for just $15, which is 42% off its original price point. It can be used indoors and outdoors, and makes the perfect addition to any garage, basement, or driveway. Livowalny Cordless LED Work Light, $15 (was $26) at Amazon Compatible with Milwaukee 18V lithium-ion batteries (not included), this handheld work light has 48 pieces of LED beads and 7,800 lumens to illuminate even the darkest areas. The light measures 6.67 inches wide and 4.33 inches tall and has two brightness settings — low and high — that are ideal for car repairs, plumbing, appliance installation, camping, emergency lighting, and more. It also features a 120 to 140-degree beam angle to help personalize the illumination. 'Excellent spotlight,' wrote one shopper. 'This little light is amazing! Super solid build and lightweight. Fits my Milwaukee batteries perfectly.' A second reviewer said, 'Extremely impressed. Works fantastic, very portable, and bright.' The cordless device includes a 5V 2.1A USB port and type C charging port that can help power electronic devices such as tablets, smartphones, speakers, and whatever else you may need. It is made of a IP67 waterproof and high temperature resistant die-cast aluminum, so you can use it in all types of weather. Plus, it has a useful handle that allows you to carry it from place to place with ease. 'Great light for the garage!' wrote a third reviewer. 'This light is incredibly bright and is wonderful for working in engine bays during repairs.' Upgrade your workspace with this $15 cordless LED light. Trust us, you'll use it for more than just your home projects and repairs. About the Author Victoria Garcia View Profile


Reuters
29 minutes ago
- Reuters
Western Digital beats quarterly revenue estimates on strong data storage demand
July 30 (Reuters) - Western Digital (WDC.O), opens new tab beat expectations for fourth-quarter revenue on Wednesday, benefiting from strong orders for its data storage products as enterprises adopt cloud computing, sending its shares up more than 4% in extended trading. Demand for Western Digital's storage devices has surged due to the widespread adoption of artificial intelligence, which makes use of data centers requiring infrastructure to hold large amounts of data for training. For the quarter ended June 27, the company reported revenue of $2.61 billion, beating estimates of $2.47 billion, according to data compiled by LSEG. Western Digital forecast first-quarter revenue of $2.70 billion on an adjusted basis, plus or minus $100 million. Analysts expect $2.54 billion. It forecast adjusted earnings per share of $1.54, plus or minus 15 cents, while analysts expect $1.38 per share.


Auto Blog
29 minutes ago
- Auto Blog
Nissan Posts $782 Million Loss Amid Factory Closures, Restructuring
By signing up I agree to the Terms of Use and acknowledge that I have read the Privacy Policy . You may unsubscribe from email communication at anytime. Shopping for a small SUV but don't need something new? Here is why shopping for an older Honda CR-V could be smarter than buying a new one. Another quarter of red for Nissan On June 30, Japanese automaker Nissan reported a big loss of 115.7 billion yen ($782 million) during the first quarter of its fiscal year from April to June. This loss comes as the company is in the middle of its Re:Nissan restructuring efforts and attempting to navigate a hefty 25% tariff on imported Japanese cars imposed by U.S. President Donald Trump back in April. 0:04 / 0:09 2025 Nissan Z undercuts Toyota Supra by a surprising amount Watch More This quarter of red marks the fourth straight quarter of losses for the automaker; a far cry from the profit of 28.5 billion yen they reported during the same period last year. On top of that, sales for the quarter hit 2.7 trillion yen, down 9.7% from the previous year, showing just how tough things are for the company right now. Furthermore, it predicts an operating loss of 100 billion yen during its next fiscal quarter after posting a 79 billion yen operating loss during the previous fiscal quarter. Source: Getty Images Trump's 15% tariffs on Japanese imports are still 'challenging,' Nissan CEO says The announcement of Nissan's quarterly financial numbers comes very shortly following the recently announced U.S.-Japan trade agreement, which has reduced automotive tariffs from 25% to 15%. As a result, the automaker reduced the estimated hit to its profit from up to 450 billion yen to 300 billion yen. In a news conference at the automaker's headquarters in Yokohama on the afternoon of July 30, Tokyo time, Nissan CEO Ivan Espinosa warned that it isn't exactly smooth sailing just yet. Global sales during the quarter reached just 707,000 vehicles, a 10.1% dip compared to the year before. Additionally, sales were down 2.4% in North America and 11.1% in Japan. 'We welcomed the improvement, but 15% is still a challenging number,' Espinosa said. 'And this is why we need to continue our efforts to improve costs.' Autoblog Newsletter Autoblog brings you car news; expert reviews and exciting pictures and video. Research and compare vehicles, too. Sign up or sign in with Google Facebook Microsoft Apple By signing up I agree to the Terms of Use and acknowledge that I have read the Privacy Policy . You may unsubscribe from email communication at anytime. In addition, Espinosa emphasized that it is keeping an eye on trade and tariff developments between the U.S. and its neighbor south of the border, as he notes that the automaker has 'a significant volume coming from Mexico.' Though it boasts a major manufacturing presence with factories in Smyrna and Decherd, Tennessee, and Canton, Mississippi, 45% of the cars sold in the United States are imported from Mexico and Japan. Source: Nissan Despite the numbers, its restructuring plan is going well. Nissan CFO says During the news conference, Nissan's Chief Financial Officer Jeremie Papin recognized and acknowledged that 'the Q1 results were weak,' but added that the company is doing well in executing its Re:Nissan restructuring and corporate austerity program. Per the Re:Nissan restructuring plan, the automaker plans to shed 20,000 jobs and close up to seven factories by March 2028. In addition, the company aims to save 500 billion yen by the end of the 2026-2027 fiscal year, which ends in March 2027. 'We are advancing steadily with Re:Nissan, and that progress is encouraging,' Papin said. 'At the same time, the magnitude of our challenge remains significant, as reflected in our Q1 results, which reinforces the urgency of continued, disciplined execution.' Nissan logo on a branch in Bavaria — Source: Getty One of those actions took place the same day it announced its results. Following similar action affecting the flagship historical Oppama plant earlier this month, Nissan announced on the morning of June 30, Tokyo time, that it will sunset production at its historical CIVAC plant in Mexico by March 2026 as part of the Re:Nissan restructuring plan; a decision that was a gutpunch to Espinosa. 'When we made the analysis, we found that the most efficient way was to consolidate everything into Aguascalientes … painful decision … not only because I'm from the region but because it's affecting the lives and sustainment of families,' Espinosa said. Final thoughts Nissan's situation is unique, and as I mentioned previously, it must overcome more than low sales and a bloated production capacity to save itself; it still has to play ball in its largest market, the United States. However, over the past few weeks and months, the Trump administration and its tariff-heavy trade policy have dotted the world map with different tariff rates. Per Axios, starting August 1, cars imported from Japan or Europe will face a 15% tariff in lieu of a 25% tax hike the U.S. imposed on all imported vehicles and car parts earlier this year. At the same time, cars built in Canada and Mexico face a 25% tax, and will face even higher tariffs on Aug. 1: 35% for cars from Canada and 30% for Mexico. To make matters more complicated, non-USMCA-compliant car parts face a 25% tariff, which can make cars produced by the Detroit Big Three and manufacturers like Nissan, Honda, Subaru, and other foreign manufacturers that have U.S. plants more expensive to build. Given Nissan's heavy multi-decade investment in Mexico, any news of a trade deal between the Trump administration and our neighbors south of the border could be a consequential one for Nissan. We will have to wait and see. About the Author James Ochoa View Profile