Induction Ceremony 2025 and iFactory Lab Inauguration at Symbiosis University of Applied Sciences, Indore
Business Wire India
Symbiosis University of Applied Sciences (SUAS), Indore, hosted the Induction Ceremony 2025 along with the inauguration of the iFactory Network Lab. This occasion marked a significant milestone in the journey towards skill-based education and digital manufacturing. Vice Chancellor Prof. (Dr.) Vinith Kumar Nair extended a warm welcome to all the dignitaries.
Chief guests at the event included Shri Kailash Vijayvargiya, Hon'ble Minister for Urban Development, Housing, and Parliamentary Affairs, Government of Madhya Pradesh; Debashish Chakravorty, Executive Vice President, Piramal Pharma Solutions; Pradip Kopardekar, Director, Kirloskar Management Services Pvt. Ltd. and Centre for Industry 4.0 Lab, Pune; Dr. Anuradda Ganesh, Chairperson, PRMC, Director and Chief Technical Advisor, Cummins India; and Registrar Dr. Manish , Registrar, along with Vice Chancellor Vinith Kumar Nair.
Shri Vijayvargiya inaugurated the state-of-the-art iFactory Network Lab, established under the Government of India's Ministry of Heavy Industries' Capital Goods Scheme (Phase II), and implemented by the Centre for Industry 4.0 Lab, Pune.
This lab is part of a national initiative to encourage smart and sustainable manufacturing and will serve as a regional hub for digital transformation, offering: Hands-on training for students and professionals
Support for pilot projects
Digital maturity assessments, especially for MSMEs
This iFactory center is one of ten such labs being launched across the country to promote region-specific Industry 4.0 adoption and reinforce the government's vision for a digitally empowered, future-ready manufacturing sector.
Dr. Swati Mujumdar, Pro-Chancellor, addressed the students and elaborated on the university's unique vision. She said,
'The model of a skill university is significantly different from conventional universities. Symbiosis is called a 'University of the Future' because skill-based education is the future of higher education. Over the past 20–25 years of research, we observed that students without formal higher education but possessing practical skills were more employable than highly educated students. Meanwhile, the industry is in urgent need of a skilled workforce. The establishment of Symbiosis Skills University and Symbiosis University of Applied Sciences aims to bridge this workforce gap.'
She further added,
'Our education model incorporates modern technology, industry-driven learning, and practical training that prepare students for employment or entrepreneurship. For international students, Symbiosis offers a 'home away from home' experience. Over the past 55 years, Symbiosis has grown into a vast educational ecosystem. In 2013–14, we realized the need to move beyond theoretical learning to focus on practical, employable skills. These two universities train students not only in theory but also in how to apply that knowledge in real-world settings. Our curriculum is designed by industry experts and training is conducted by them as well.'
'Students from conventional education systems often don't know how to handle basic machinery, whereas Symbiosis-trained students excel in practical applications. Internships offer hands-on experience, and 100% attendance is mandatory, which ensures 100% placements. Since our model is based on the German dual-education system, our students are also in demand in German companies. We also focus on English communication, personality development, soft skills, and leadership – all of which help boost students' confidence and performance in job interviews.'
'We offer free interdisciplinary courses, access to advanced labs and infrastructure, and an internship-integrated learning model. These facilities open up job opportunities – but your success will depend on your hard work, integrity, and commitment. The friends you make during this academic year will be your lifelong support system.'
Shri Kailash Vijayvargiya fondly recalled his conversation with Dr. S. B. Mujumdar during the establishment of this university. Addressing students, he said,
'Post-2014, India has been undergoing transformational change. Your new ideas can shape the world. While options were limited earlier, today there are countless opportunities. India is on the path to becoming a developed nation, and students have a key role to play in that journey.'
Debashish Chakravorty remarked,
'You are growing up alongside your education. If your goals are clear, you will surely succeed. Focus on building your personality. Life is a journey that may include setbacks, but enjoy the process. Today's market offers immense opportunities—put in your best effort and success will follow.'
Pradip Kopardekar shared,
'Wherever you go today, technology is present. As India moves toward self-reliance, technology plays a major role. The newly inaugurated iFactory Network Lab will greatly benefit everyone here.'
Dr. Anuradda Ganesh, Chairperson, PRMC, Retd. Director and Chief Technical Advisor, Cummins India, added,
'The iFactory Network Lab inaugurated today will provide immense value, shaping students to be industry-ready. This lab is not just a space but a gateway to real-world experience. Digital transformation is emerging as the new face of the future industry.'
The induction ceremony concluded with a campus tour and an overview of university facilities organized for the students. Registrar Dr. Manish briefed students about university policies and the code of conduct.
Disclaimer: The above press release comes to you under an arrangement with Business Wire India. Business Upturn take no editorial responsibility for the same.
Ahmedabad Plane Crash
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Forbes
2 days ago
- Forbes
ERP Shifts To Industry 5.0 To Enable Smarter, Human-Centric Operations
Conceptually, the progression from Industry 4.0 to 5.0 reflects an ongoing evolution toward smarter, ... More more connected and more human-centric systems that drive innovation and resilience. PX Media - ERP and supply chain systems are evolving alongside the broader movement in how industries approach innovation. The 'Industry n.0' framework — spanning early mechanization (1.0), mass production (2.0), automation (3.0) and today's smart, connected systems (4.0) — has helped organizations track progress and plan their next steps. Industry 5.0 is now gaining traction with a focus on enabling technology to work with people, not just automating around them. In recent years, Industry 4.0 technologies including AI, IoT and robotics have continued to improve efficiency by automating tasks and connecting systems across ERP and supply chains. But as I look ahead to the rest of 2025 and beyond, I see the conversation shifting. Industry 5.0 emphasizes human-machine collaboration — where, for example, AI agents assist humans rather than replacing them, and systems are built to support human creativity, judgment and sustainability. One theme in an article I wrote earlier this year, 'ERP Leveled Up in 2024 — Where Is It Headed in 2025?,' was to explore how Industry 4.0 and 5.0 are shaping the next generation of ERP. The global Industry 5.0 market reflects this momentum — valued at $82.57 billion in 2025 and projected to reach $2.15 trillion by 2037, with a CAGR of 30.7%. This growth is fueled by AI-enabled ERP, enterprise-wide data integration and the increasing adoption of technologies including IoT, IIoT and digital twins. In short, ERP systems are being reengineered for a new era. Thanks to AI agents, context-aware automation and the other technologies discussed here, ERP is moving beyond transaction processing to actively detect disruptions, support real-time decisions and adapt on the fly. It's no longer just a back-office system — it's becoming a critical driver of intelligent operations. Industry 5.0 emphasizes the collaboration between humans and machines to create synergistic relationships that enhance productivity and workplace satisfaction. The obvious example of this is the use of AI. Already today, AI is seemingly everywhere in production facilities. Among many other impacts, this changes how we use ERP. Instead of ERP systems being limited to traditional planning tools, they are now smart platforms that can provide real-time operational data and forward-looking insights. Organizations can use this to streamline their processes and make more informed decisions. A specific example is using AI assistants in manufacturing and operations. These tools help planners, engineers and frontline workers handle data, flag issues and draft reports or maintenance logs — accelerating results while keeping humans in control. The AI assistant software market was valued at $8.5 billion in 2024 and is projected to reach $35.7 billion by 2033, growing at a 17.5% CAGR. Modern ERP platforms reflect this shift by embedding AI directly into workflows — not just to automate, but to improve how users interact with data through personalized dashboards, smart alerts and context-aware suggestions. Personalization represents a core principle of Industry 5.0. Modern manufacturing systems support hyper-customization through additive manufacturing, smart product configurators and flexible production lines. AI algorithms predict customer needs and adjust configurations in real time, while 3-D printing enables cost-effective production of custom parts. These systems rely on evolved ERP platforms that integrate customer data, production capacity and material availability to deliver custom goods at scale. Industry 5.0 combines smart technology with human input to build systems that adapt quickly, handle ... More disruptions better and support sustainable business growth. Adobe In an Industry 5.0 context, AI agents are emerging as a key link between human expertise and intelligent automation. Deloitte projects that 25% of enterprises using generative AI will deploy autonomous AI agents in 2025, doubling to 50% by 2027. It's not hard to see why: The World Economic Forum identifies AI agents as capable of achieving up to 14% cost savings through intelligent automation. Unlike traditional rule-based systems, AI agents interpret real-time data, learn from patterns and act within defined boundaries. They go beyond basic automation, evolving from content generators (as in generative AI) into autonomous problem solvers capable of reasoning, planning and taking action. AI agents are already performing practical, high-impact tasks in today's manufacturing and industrial environments. They predict equipment failures using sensor data and automatically trigger maintenance workflows in ERP or CMMS systems. They adjust production schedules in real time when delays, material shortages or demand fluctuations occur. AI agents also help optimize inventory levels by analyzing usage trends and supplier lead times, reducing overstock and stockouts. In manufacturing, AI agents can also help manage quality control by analyzing production data — often using computer vision, which for years now has allowed machines to interpret visual information from cameras to detect defects or irregularities. When a problem is identified, the AI can automatically adjust the process and coordinate with other systems to correct it. It also communicates with upstream and downstream processes to ensure the fix is carried through the entire line. This speeds up corrections, reduces waste and minimizes the need for manual inspection. Another area for waste reduction is energy management, where AI agents can monitor consumption patterns and recommend adjustments to improve efficiency. What's different now is how agentic AI enables autonomous, context-aware coordination across systems. They work across systems such as MES, ERP and SCM, managing entire sequences of interrelated tasks — not just one-off actions. If a supplier delay occurs, an agent might reschedule production, reassign inventory, update material availability in the ERP and adjust delivery timelines in the SCM system. It can also flag these changes for human review before moving forward. This 'human-in-the-loop' approach lets AI handle routine coordination and data entry, while keeping planners in control of the critical decisions. AI agents are making ERP systems more adaptive, enabling faster actions and smarter collaboration across the enterprise — an essential step forward in the practical realization of Industry 5.0. In this context, ERP systems must continue to evolve into coordination platforms that manage multi-agent execution and workflows, interfacing with external ecosystems and internal operations. These systems will require open APIs and real-time data processing capabilities to function as orchestration layers between AI agents, IoT systems (more on that in a moment) and external partners, enabling seamless communication and coordination across diverse manufacturing environments. IoT And Industrial IoT Data In Action IoT and IIoT systems provide the foundation for real-time sensor data to drive autonomous operations. The industrial IoT market is projected to reach $275.7 billion by 2025, with manufacturing, energy and logistics sectors heavily investing in IIoT solutions. These devices continuously monitor temperature, vibration, pressure or other variables across factory floors and other industrial sites, feeding data directly into ERP systems and analytics platforms for faster, more accurate decision making. Current adoption rates show that 62% of manufacturers have embraced IoT technologies in their manufacturing or assembly processes, with 43% leveraging real-time location systems. Yet only 18% of manufacturers have real-time visibility into their operations, making advanced IoT solutions crucial for bridging operational gaps. As touched on earlier, IoT data can combine with AI to power predictive maintenance and automated quality control systems that detect early signs of equipment failure and automatically initiate repairs. Modern predictive maintenance systems also leverage machine learning algorithms to analyze vast sensor data streams, identifying subtle anomalies and patterns that might indicate equipment problems. This early detection capability allows manufacturers to schedule maintenance precisely when needed, avoiding both unexpected breakdowns and unnecessary maintenance interventions. In supply chains, IoT sensors embedded in transport vehicles, warehouses and supplier facilities provide real-time insights on goods movement, environmental conditions and delivery timelines, enabling AI agents to dynamically reroute deliveries or reorder inventory. In all of these examples, we again see common themes of reducing waste and improving efficiency. Data Infrastructure Requirements For Industry 4.0 And 5.0 As operations become increasingly autonomous, harmonized data enables interoperability across systems and vendors. Standardized data formats provide the foundation for intelligent agents and ERP platforms to share and act on information effectively, which is essential for cross-enterprise collaboration in complex multi-tier supply chains. Digital twins are becoming standard practice, with the market projected to reach $73.5 billion by 2027. These virtual replicas of physical assets simulate operations using real-time data, allowing businesses to test changes, optimize processes and predict outcomes without disrupting live environments. Modern digital twins integrate real-time data from sensors, IoT devices and enterprise systems, creating continuously updated virtual replicas that provide instant insights into performance. Scalable infrastructure built on cloud, edge computing and API-driven platforms is essential for supporting these advanced capabilities. Edge computing is significant for manufacturing, where milliseconds can make substantial differences in the performance of robotics, predictive maintenance and automated quality assurance. By processing data locally, edge systems ensure continuous operation even during connectivity outages, reducing bandwidth costs and improving response times. Sustainability And Human-Centricity In Industry 5.0 Sustainability and human-centricity are central to how Industry 5.0 is implemented. Rather than focusing solely on economic efficiency and scale, organizations are also embedding environmental responsibility and workforce well-being into how systems are designed and operated. On the sustainability front, ERP and supply chain systems equipped with AI agents are helping companies monitor energy use, track emissions and reduce waste in real time. These systems support practical goals such as optimizing transportation routes, choosing lower-impact materials and improving asset utilization. As reporting requirements and environmental expectations grow, these capabilities are becoming essential to day-to-day operations. Human-centricity means designing systems that work with people, not just around them. AI agents can reduce manual workload by handling repetitive tasks, surfacing relevant information and supporting faster decision making, freeing employees to focus on tasks requiring human judgment or creativity. In practice, this improves not just efficiency but also job satisfaction and workplace safety. Industry 5.0 is not about replacing what came before, but expanding how organizations think about performance. By integrating sustainability and human factors directly into ERP and operational workflows, companies can better balance productivity with long-term resilience. The Future Of ERP Starts With Industry 5.0 Industry 5.0 concepts are already prompting a major rethink of how ERP systems are designed. We're moving away from rigid, monolithic architectures toward more modular, event-driven systems supporting real-time data processing, human-machine collaboration and AI agents that actively participate in day-to-day operations. ERP isn't just about automating transactions anymore — it's about enabling systems that are smarter, more sustainable and more aligned with strategic outcomes. That means cleaner data, better context and platforms that can evolve alongside the business. AI agents will be central to this shift. Instead of merely reacting to inputs, they'll guide processes, anticipate disruptions and help teams make faster, more informed moves. But that only works if ERP systems are built to support it — which mandates architectures that are flexible, integrated and capable of managing both structured and unstructured data at scale. This is just the beginning. As we look ahead to Industry 6.0, which is expected to take shape around 2050, ERP will need another overhaul. We'll be entering an era of hyper-autonomy, where intelligent agents make decisions with minimal human involvement, and technologies like quantum computing and nanotechnology take center stage. Quantum alone could unlock new capabilities in materials science, chemistry, drug discovery, finance, economics, climate modeling and advanced physics simulations. And it only makes sense to predict that these new applications will drive ERP systems that are more complex, faster and more innovative than we see today. In an upcoming article, I'll explore how ERP platforms need to evolve to support a future defined by autonomy, intelligence and paradigm-level innovation.
Associated Press
2 days ago
- Associated Press
Rise of Globalization, Just-in-time Manufacturing, and Omnichannel Distribution Fueling Demand
DUBLIN--(BUSINESS WIRE)--Jul 29, 2025-- The 'Supply Chain Management Market in Manufacturing By Component, and End User - Global Forecast to 2032" report has been added to offering. The growth of this market is driven by increasing adoption of digital technologies such as AI, IoT, blockchain, and cloud-based SCM software, which enable real-time tracking, predictive analytics, and automation. The rise of globalization, just-in-time manufacturing, and omnichannel distribution has further amplified the need for robust SCM solutions. Additionally, disruptions caused by geopolitical tensions, pandemics, and climate change have pushed manufacturers to invest in risk mitigation strategies and sustainable supply chain practices. With the growing emphasis on Industry 4.0, circular supply chains, and supplier collaboration, the SCM market in manufacturing is expected to expand significantly, driven by the need for agility, transparency, and cost optimization in an increasingly complex global trade environment. The key players operating in the supply chain management market in manufacturing are SAP SE (Germany), Oracle Corporation (U.S.), Blue Yonder Group, Inc. (formerly JDA Software) (U.S.), Manhattan Associates Inc. (U.S.), Siemens AG (Germany), Kinaxis Inc. (Canada), IBM (U.S.), Logility Supply Chain Solutions, Inc. (U.S.), Coupa Software Inc. (U.S.), Honeywell International Inc. (U.S.), Zebra Technologies Corporation (U.S.), Dematic (KION Group) (U.S.), Dassault Systemes SE (France), and Korber AG (Germany). In 2025, Asia-Pacific is expected to account for the largest share of 37.2% of the supply chain management market in manufacturing. The large share of this region is mainly attributed to a confluence of strategic advantages and economic factors. At the heart of this dominance lies the region's extensive manufacturing infrastructure, particularly in countries like China, Japan, South Korea, and increasingly India, which have developed robust industrial ecosystems that support complex and efficient supply chains. These nations have invested heavily in technological infrastructure, advanced manufacturing capabilities, and skilled workforce development, creating a highly competitive environment that attracts global manufacturers. Based on component, the supply chain management market in manufacturing is segmented into solutions and services. In 2025, the solutions segment is expected to account for a larger share of 67.9% of the supply chain management market in manufacturing. The large share of this segment is mainly attributed to the rising need for supply chain resilience and risk management, the growing complexity of global supply networks, the rising demand for real-time visibility and analytics, and pressure to reduce operational costs while improving service levels and regulatory compliance requirements across different markets. Manufacturers increasingly rely on advanced SCM software (ERP, WMS, TMS, demand planning tools) to optimize inventory, reduce costs, and enhance coordination with suppliers. The shift toward Industry 4.0, enabled by IoT sensors, AI-driven analytics, and cloud platforms, further accelerates adoption. Additionally, hardware (RFID, automated guided vehicles, robotics) plays a critical role in warehouse automation and tracking, reducing manual errors. By type, the supply chain management solutions market in manufacturing is segmented into software and hardware& automation. The software segment is expected to dominate the market in 2025, owing to its critical role in enabling end-to-end supply chain visibility, predictive analytics, and real-time decision-making. Manufacturers rely heavily on software solutions such as enterprise resource planning (ERP), transportation management systems (TMS), warehouse management systems (WMS), and artificial intelligence (AI)-driven analytics to optimize supply chain efficiency. The shift towards cloud-based platforms, the increasing integration of AI and machine learning, and the demand for digital twin technologies further drive software adoption. Additionally, software solutions require lower initial investment compared to hardware, making them more accessible across different manufacturing scales. By end user, the supply chain management market in manufacturing is segmented into automotive, electronics and semiconductor, industrial machinery, pharmaceuticals, chemicals, aerospace and defense, food and beverage, oil and gas, and others (agriculture, medical devices, construction). The electronics and semiconductor segment is projected to register the highest CAGR during the forecast period of 2025-2032. The high growth of this segment is mainly driven by globally dispersed production, compressed product lifecycles, and vulnerability to disruptions. The 2020-2023 chip shortage exposed supply chain fragilities, driving investments in predictive analytics, diversified sourcing, and inventory buffers. The industry's need for precision logistics, given components' high value and environmental sensitivity, is accelerating IoT-based monitoring, blockchain authentication, and AI-driven quality control. Key Questions Answered in the Report: Market Dynamics Global SCM Market in Manufacturing: Impact Analysis of Market Drivers (2025-2032) Global SCM Market in Manufacturing: Impact Analysis of Market Restraints (2025-2032) Global SCM Market in Manufacturing: Impact Analysis of Market Opportunities (2025-2032) Global SCM Market in Manufacturing: Impact Analysis of Trends Impact of Sustainability on the Supply Chain Management Market in Manufacturing Regulatory Landscape and Policy Frameworks Market Trends and Consumer Demands Technological Innovations Enabling Sustainable Supply Chains Strategic Approaches to Sustainable Supply Chain Management Implementation Challenges and Success Factors Emerging Technologies and Innovation Frontiers Strategic Implications for Industry Stakeholders Porter's Five Forces Analysis Competition Analysis Company Profiles Scope of the Report: Supply Chain Management Market in Manufacturing Assessment by Component Supply Chain Management Market in Manufacturing Assessment by End User Supply Chain Management Market in Manufacturing Assessment by Geography For more information about this report visit About is the world's leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends. View source version on CONTACT: Laura Wood, Senior Press Manager [email protected] For E.S.T Office Hours Call 1-917-300-0470 For U.S./ CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call +353-1-416-8900 KEYWORD: INDUSTRY KEYWORD: SUPPLY CHAIN MANAGEMENT RETAIL TRANSPORT LOGISTICS/SUPPLY CHAIN MANAGEMENT SOURCE: Research and Markets Copyright Business Wire 2025. PUB: 07/29/2025 12:01 PM/DISC: 07/29/2025 12:01 PM
Yahoo
2 days ago
- Yahoo
Optical Measuring Machine Market Experiences High Growth with the Rise in Demand for Precision Across Industries
NEW YORK, July 29, 2025 /PRNewswire/ -- According to a comprehensive new report from The Insight Partners, the global optical Measuring Machine Market is observing healthy growth owing to the rise in demand for precision across industries across the globe, surge in smart factories, and increase in adoption of 3D optical measuring machines. The Optical Measuring Machine Market is expected to reach USD 4.63 billion by 2031 from USD 2.85 billion in 2024; it is expected to record a CAGR of 7.3% during the forecast period. The growing industrial expansion, rising demand for precision across industries, and growth in smart factories are among the main factors driving the demand for optical measuring machines. The report runs an in-depth analysis of market trends, key players, and future opportunities. Integrating AI Technology in optical measuring machines will likely bring new trends to the market. To explore the valuable insights in the Optical Measuring Machine Market report, you can easily get a sample PDF of the report - Overview of Report Findings The rising manufacturing volume across sectors and the increasing use of 3D optical measuring machines fuel the market. Technological advancements and manufacturers' focus on developing advanced optical measuring machines are expected to create lucrative opportunities in the market during the forecast period. Further, the soaring research and development activities, integration of AI technology in optical measuring machines, and evolution of next-generation optical measuring machines are expected to generate future growth opportunities in the market. Rise in Demand for Precision Across Industries: Precision engineering machines provide accuracy and precision while developing complicated components. Industries such as aerospace, automotive, electronics, semiconductor, and medical equipment are increasingly demanding highly precise and noncontact measurement tools. Adopting optical measuring machines is essential in making complex components such as engine parts, transmission systems, chassis components, and electrical systems, ensuring high precision and instance, in the aerospace industry, precision and accuracy are essential to develop the critical components of an aircraft. The design phase of aircraft components is necessary for precision as manufacturing relies on the design. Even small errors can cause major safety issues, such as the failure of critical aircraft components, loss of control, or serious crashes. Optical measuring instruments provide micron-level precision, ensuring that components adhere closely to design specifications while avoiding mechanical stress or damage. Surge in Smart Factories: The growth of smart factories is associated with the evolution of the Industry 4.0 concept and digital transformation. Smart factories use Industry 4.0 technologies to collect, share, and analyze real-time data from machines, devices, and production systems. This necessitates using optical measuring machines to maintain high-precision, dependable, and efficient quality control in factory procedures. Optical measuring machines use technologies such as structured light, laser scanning, and vision systems to meet the needs of smart factories. Industry 4.0 technology can help businesses understand their customers' preferences, improve quality control, and increase industrial technologies such as artificial intelligence (AI), machine learning (ML), and others are helping businesses to become more flexible, efficient, and safe. According to BDO's 2024 Manufacturing CFO Outlook Survey, 47% of manufacturers worldwide plan to increase their investment in smart factory technologies, especially AI, in 2024. This investment supports factories to use (AI) and (ML) technologies to analyze vast amounts of data generated throughout the production process, allowing businesses to understand consumer behavior and preferences. This data-driven strategy allows for the customized development of goods. Increase in Adoption of 3D Optical Measuring Machines: Industries are highly adopting 3D optical measuring machines such as 3D laser scanners in metrology and scanning applications. These machines perform quality inspection, reverse engineering, and research and development. Due to the growing industrial demand for higher precision and efficiency, Noncontact, high-resolution 3D scanning methods play an increasingly important role in the global optical Measuring Machine reverse engineering, 3D scanning enables the precise reconstruction of existing components, particularly those without digital design files. This functionality is especially useful in automotive, aerospace, and legacy manufacturing applications where older parts must be digitally reproduced for redesign or replication. Optical measuring machines enable fast and precise dimensional verification for quality inspection, detecting real-time deviations from specifications. This assures product consistency and allows medical devices, electronics, and the precision engineering sector to compile with increasingly strict regulatory standards. Similarly, in research and development, 3D measurement promotes innovation and allows industries to conduct material deformation analysis, rapid prototyping, and performance evaluation under different situations. Geographical Insights: In 2024, Asia Pacific led the market with a substantial revenue share, followed by North America and Europe, respectively. Asia Pacific is expected to register the highest CAGR during the forecast period. Stay Updated on Optical Measuring Machine Market Trends: Market Segmentation Based on equipment, the market is divided into profile projectors, optical digitizers and scanners (ODSS), coordinate measuring machines (CMMs), measuring microscopes, video measuring machines (VMM)/vision measuring systems, profilometers, and others. In terms of industry vertical, the market is categorized into automotive, aerospace and defense, energy and power, electronics manufacturing, industrial, medical, and others. The optical Measuring Machine Market is classified into contact and noncontact based on type. The market is bifurcated into straight (prismatic) and turned parts by application. Competitive Strategy and Development Key Players: A few of the major companies operating in the Optical Measuring Machine Market are Jenoptik AG; Keyence Corp; OGP; Micro-Vu; Sylvac SA; Mahr GmbH; Marposs S.p.A.; and Chotest Technology Inc. Trending Topics: Optical Metrology and Inspection Market Global Headlines on Optical Measuring Machine Market With the acquisition of the Ettlingen-based company OptoSurf GmbH in 2024, Mahr has expanded its portfolio to include scattered light technology. Experts will be able to see the devices as part of the MarSurf3D family for the first time at Control 2025 in Stuttgart. With the implementation of the OptoSurf portfolio, Mahr is opening up new possibilities in the field of tribology. Customers thus receive a further plus in cutting-edge technology from the metrology manufacturer. Marposs has inaugurated a new 400-square-meter Tech Center in Bangalore. This facility will showcase Marposs' most advanced technologies, offering tailored solutions to meet the specific needs of the Indian market, with focus on Semiconductors, Consumer Electronics, Aerospace, and Batteries. Marposs has established strong relationships with local industries, government institutions, and research organizations to drive innovation and develop tailored solutions for the Indian market. Get Premium Copy of Optical Measuring Machine Market Size and Growth Report 2031 at: Conclusion The optical Measuring Machine Market in Asia Pacific is experiencing significant growth, driven by a combination of growing industrial expansion, rising technological advancements, and increasing demand for precision in manufacturing processes. Moreover, the region's end-use industries such as automotive, aerospace, electronics, and medical devices are growing significantly. These sectors demand high-precision measurement solutions for quality assurance and process optimization, making optical measuring machines essential to their production lines. The adoption of automation and smart manufacturing is also rising across the region. Countries such as China, Japan, South Korea, and India are investing heavily in Industry 4.0 initiatives, leading to increased integration of optical metrology systems into automated production environments. The shift toward contactless and non-destructive testing methods is further bolstering the appeal of optical measuring machines, which offer speed, accuracy, and flexibility without compromising material integrity. Moreover, advancements in optical technology, such as 3D measurement, laser scanning, and machine vision, are enhancing the capabilities of these machines. The proliferation of complex components and miniaturized parts, especially in electronics and medical devices, has made traditional measurement tools less effective, reinforcing the need for advanced optical solutions. Trending Related Reports: Current Measuring Device Market Overview, Growth, Trends, Analysis, Research Report (2025-2031) Form and Surface Measuring Machines Market Analysis and Forecast by Size, Share, Growth, Trends 2031 Gear Measuring Machines Market Growth and Analysis by 2031 Coordinate Measuring Machines Market Size 2021-2031 | Growth Drivers Test and Measuring Tools Market Growth, Size, Share, Trends, Key Players Analysis, and Forecast till 2031 Level Measuring Equipment Market Strategies, Top Players, Growth Opportunities, Analysis and Forecast by 2031 About Us: The Insight Partners is a one stop industry research provider of actionable intelligence. We help our clients in getting solutions to their research requirements through our syndicated and consulting research services. We specialize in industries such as semiconductor and electronics, aerospace and defense, automotive and transportation, biotechnology, healthcare IT, manufacturing and construction, medical devices, technology, media and telecommunications, and chemicals and materials. Contact Us: If you have any queries about this report or if you would like further information, please contact us: Contact Person: Ankit MathurE-mail: +1-646-491-9876 Logo: View original content: SOURCE The Insight Partners
