HELOC rates today, July 30, 2025: Unchanged as the Fed announces its decision
The Federal Reserve will announce its short-term interest rate decision today, but it is highly expected to leave rates unchanged. As a result, the prime rate will likely stay the same. Wall Street is looking for the Fed to lower rates in September, as there is no meeting in August.
Let's check today's home equity line of credit rate.
This embedded content is not available in your region.
HELOC rates Wednesday, July 30, 2025
According to Bank of America, the largest HELOC lender in the country, today's average APR on a 10-year draw HELOC held firm at 8.72%. That is a variable rate that kicks in after a six-month introductory APR, which is 6.49% in most parts of the country.
The lowest HELOC rate reported was 8.05%, with the maximum 9.59%.
Homeowners have a sizable amount of value tied up in their houses — more than $34 trillion at the end of 2024, according to the Federal Reserve. That's the third-largest amount of home equity on record.
With mortgage rates lingering in the high 6% range, homeowners are not likely to let go of their primary mortgage anytime soon, so selling the house may not be an option. Why let go of your 5%, 4% — or even 3% mortgage?
Accessing some of the value locked into your house with a use-it-as-you-need-it HELOC can be an excellent alternative.
How lenders determine HELOC interest rates
HELOC interest rates are different from primary mortgage rates. Second mortgage rates are based on an index rate plus a margin. That index is often the prime rate, which today is 7.50%. If a lender added 1% as a margin, the HELOC would have a rate of 8.50%.
Lenders have flexibility with pricing on a second mortgage product, such as a HELOC or home equity loan, so it pays to shop around. Your rate will depend on your credit score, the amount of debt you carry, and the amount of your credit line compared to the value of your home.
And average national HELOC rates can include "introductory" rates that may only last for six months or one year. After that, your interest rate will become adjustable, likely beginning at a substantially higher rate.
How a HELOC works
You don't have to give up your low-rate mortgage to access the equity in your home. Keep your primary mortgage and consider a second mortgage, such as a home equity line of credit.
The best HELOC lenders offer low fees, a fixed-rate option, and generous credit lines. A HELOC allows you to easily use your home equity in any way and in any amount you choose, up to your credit line limit. Pull some out; pay it back. Repeat.
Meanwhile, you're paying down your low-interest-rate primary mortgage like the wealth-building machine you are.
This embedded content is not available in your region.
Look for introductory rates, but be aware of a rate adjustment later
Today, FourLeaf Credit Union is offering a HELOC rate of 6.49% for 12 months on lines up to $500,000. That's an introductory rate that will convert to a variable rate later. When shopping lenders, be aware of both rates. And as always, compare fees, repayment terms, and the minimum draw amount. The draw is the amount of money a lender requires you to initially take from your equity.
The power of a HELOC is tapping only what you need and leaving some of your line of credit available for future needs. You don't pay interest on what you don't borrow.
HELOC rates today: FAQs
What is a good interest rate on a HELOC right now?
Rates vary so much from one lender to the next that it's hard to pin down a magic number. You may see rates from nearly 7% to as much as 18%. It really depends on your creditworthiness and how diligent a shopper you are.
Is it a good idea to get a HELOC right now?
For homeowners with low primary mortgage rates and a chunk of equity in their house, it's probably one of the best times to get a HELOC. You don't give up that great mortgage rate, and you can use the cash drawn from your equity for things like home improvements, repairs, and upgrades. Of course, you can use a HELOC for fun things too, like a vacation — if you have the discipline to pay it off promptly. A vacation is likely not worth taking on long-term debt.
What is the monthly payment on a $50,000 home equity line of credit?
If you take out the full $50,000 from a line of credit on a $400,000 home, your payment may be around $395 per month with a variable interest rate beginning at 8.75%. That's for a HELOC with a 10-year draw period and a 20-year repayment period. That sounds good, but remember, it winds up being a 30-year loan. HELOCs are best if you borrow and pay back the balance in a much shorter period of time.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
7 minutes ago
- Yahoo
Roku Beats, But Margin Drift Clouds Rally
Roku (NASDAQ:ROKU) beat again in Q2 $1.11 billion revenue, GAAP EPS $0.07, both ahead of expectations but the stock slipped because the story wasn't all clean. Platform revenue was the strength, up 18% to $975.5 million, helped by video ads and the Frndly deal, while device sales fell 6% to $135.6 million. Warning! GuruFocus has detected 7 Warning Signs with BOM:500400. That mix showed up in the margin math: gross margin slid to 44.8%, with platform gross margins softening to 51.0%, and investors focused on that erosion even as the top line surprised. Roku tried to push back. It lifted its full-year platform revenue target to $4.075 billion, said adjusted EBITDA should improve, and rolled out a $400 million buyback to neutralize equity dilution and signal confidence. The message was basically: growth is real, cash flow is coming, and we're backing the stock. Still, the market saw the margin pressure and the need for share support and took it as a warning shot, trimming the stock before the open. Demand is there, but profitability is wobbling a bit. The next few quarters will show whether Roku can get margins back on track and turn that buyback into real per-share value. This article first appeared on GuruFocus.
Yahoo
7 minutes ago
- Yahoo
Nova Minerals Achieves High Gold Recoveries at RPM
Anchorage Alaska, Aug. 04, 2025 (GLOBE NEWSWIRE) -- Nova Minerals Limited ('Nova' or the 'Company') (NASDAQ: NVA) (ASX: NVA) (FRA: QM3) ) is pleased to announce results from the ongoing RPM gold feasibility metallurgical test work program, which is showing exceptional recoveries in our opinion, with potential further opportunities to optimize for even higher recoveries. Highlights RPM conceptual flowsheet outlines clear path to high gold recoveries (Figure 6). High-grade ore over 2 g/t Au fed directly into the carbon in pulp (CIP)/carbon in leach (CIL) circuit to optimize gold recovery. Ore below 2 g/t Au will be processed through the ore sorter, where a 1,000 kg bulk test with Steinert Mining upgraded 1.32 g/t Au material to 5.72 g/t Au — an increase of 4.33 times in a single pass (Figures 1, 2 and 3). Lower-grade ore rejected by the sorter will undergo heap leaching, with column tests showing potential gold recoveries as high as 68.7% (Figure 4 and 5 and Table 1). Advanced sorting technology expect to increase the volume of high-grade feed to processing circuits, optimize resources and maximize orebody value. Ongoing CIP/CIL test work for the Pre-Feasibility Study (PFS) aims to advance this part of the flowsheet. High pressure grinding rolls (HPGR) crushing test work is in progress to further optimize the flowsheet and provide power cost efficiencies in the PFS. Nova CEO, Mr Christopher Gerteisen commented: 'We are extremely pleased with the results emerging from our ongoing metallurgical test work program at the RPM Deposit, which we believe continues to demonstrate the exceptional quality and scalability of the Estelle Project. The ability to extract up to 68.7% gold recovery from lower-grade material through heap leaching, combined with a 4.33 times upgrade using ore sorting technology, is a significant technical breakthrough, in our opinion. These results underscore the economic potential through innovative processing methods as we continue to refine our development pathway. This multi-pronged flowsheet approach — incorporating ore sorting, heap leaching, and CIP/CIL processing has the potential to be a best-in-class strategy for maximum gold recovery, efficient capital deployment, and lower processing costs. We believe RPM has the hallmarks of a low-cost, high-margin gold producer. With CIP/CIL test work well underway and further optimization on ore sorting and HPGR crushing still to come, we believe the upside could be significant. These preliminary results strengthen our belief that Estelle is a potential world-class, long-life gold district capable of delivering sustained value to shareholders. Nova remains focused on delivering the next major North American gold mine, and these latest results from RPM bring us another step closer to achieving that vision.' Ore Sorting Test Work Results Particle density X-Ray Transmission (XRT) ore sorting is a proven technology which has been successfully implemented as part of the pre-treatment concentration process in many mines around the world. X-rays are used to examine the density of the rock being sorted in order to separate a target mineral, ore or element from waste prior to the haulage, crushing and processing mining stages. By rejecting a considerable proportion of the lower grade rock before processing through the mill, the mill feed grade is effectively increased and energy requirements and tailings generation are reduced, resulting in a more environmentally friendly mining operation with improved overall mine efficiencies and economic benefits. The process starts with raw ore being scanned with X-rays and data collected from the detector. With the help of big data and intelligent algorithms, the ore and waste rock is separately identified and a high-pressure blower sprays the waste rock away to realize efficient automatic intelligent sorting. To see a short video of how ore sorting works please go to 1. Steinert ore sorter Nova and METS Engineering (METS) partnered with Steinert Mining (Steinert) to evaluate RPM orebody amenability to sensor-based ore sorting. Test work at Steinert was conducted in 2 stages with sighter test work undertaken followed by a large 1,000 kg bulk test. The result from the bulk test work program demonstrated the Estelle RPM ore is amenable to ore sort upgrading with a XRT and 3D-laser combination algorithm. Figure 2 illustrates the three stage test work process undertaken by Steinert to evaluate the amenability of the ore. Figure 3 presents the cumulative recovery, mass pull and grades obtained from the test 2. Steinert Illustration of the three-stage XRT and 3D-laser separation process, reporting the mass yields, Au recoveries and Au grades for the Estelle RPM gold bulk sample The results presented in Figure 2 demonstrated that a high density fraction can be recovered through ore sorting in which 48.8% Au is recovered in a mass yield of 11.3% in the first pass. This generated a concentrate of 5.72 g/t Au from a 1.32 g/t feed – a 4.33 times upgrade in the first pass through the ore sorter. Steinert strongly recommends Nova Minerals implement sensor sorting into the Estelle RPM process, to obtain a relatively high grade concentrate in a low mass yield. The implementation of the ore sorting technology has the potential to be further 3. Cumulative gold recovery (%), mass pull (%) and grade (g/t) for the Estelle RPM gold bulk sample Heap Leaching Metallurgical Test Work Results Heap leaching is a low capital and operating cost alternative to conventional mill processing techniques for gold recovery from lower grade ore sources. It is a well-proven and cost-effective approach used by the majors including Barrick Gold, Newmont, Kinross Gold's Alaskan Fort Knox and Eldorado Gold's Kışladağ mine to name a few. Heap leaching can potentially recover the gold from 100's of millions of tons of lower grade material, and the reject material from the ore sorters, which otherwise would be regarded as waste. This has the potential to significantly increase the gold production from the project. Figure 4 below shows how a typical heap leach process works with ore put through an optional pre-application phase before being stacked on an impermeable heap pad. The pad is then irrigated with a leaching agent for an extended period of time which chemically reacts with the ore to dissolve the gold into a solution as it percolates through the heap. The impregnated solution is then collected at the bottom of the heap and the gold is recovered though a gold processing plant, with the barren solution recycled to start the process 4. A typical heap leach process Heap leaching has a number of benefits including: Recovers low grade gold from ore that was previously sent to waste, resulting in higher potential gold production. Lower capital cost relative to other methods of gold recovery, as with only higher-grade ore now going through the plant, a smaller plant is required. Simple process with lower operating costs than conventional processing techniques (lower energy consumption, less equipment configuration). Can move a project to cashflow at a quicker pace and generate the capital required to finance the more expensive processing facilities. Suitable for all climates eg: The Fort Knox gold mine in Alaska uses heap leaches to extract gold. Nova engaged METS Engineering to undertake test work to evaluate the amenability of RPM to heap leaching. METS undertook a comprehensive prefeasibility heap leaching test work program on low grade RPM ore. The program consisted of crush size sensitivity testing, agglomeration and percolation testing and culminated in four heap leach column tests. The material used in the column test was crushed using High Pressure Grinding Rolls (HPGR). Table 1 presents the results of the column leach test work which shows that at an achievable crush size of 3.35 mm after 59 days of leaching 68.7% gold extraction can be achieved from RPM low grade ore. Cyanide consumption ranged from 0.61 to 0. 92 kg per ton of ore. Lime consumption ranged from 0.081 to 0.139 kg per ton of ore. Both reagent consumptions are reasonable for heap leaching. Table1. Heap leach column test work results Test ID Crush Size Days under leach Au % NaCN (%) NaCN kg/t Lime kg/t MN3544 3.35 mm 59 68.7 0.05 0.92 0.139 MN3545 2.00 mm 43 62.6 0.05 0.77 0.095 MN3546 1.00 mm 43 73.4 0.05 0.77 0.109 Figure 5 illustrates the gold leaching kinetics for each of crush size obtained from the column test work. The low grade ore was still leaching when the columns were terminated and during heap leach operations in the field a much longer leach cycle could be 5. RPM column leach test work results RPM Conceptual Flowsheet Based on the positive test results Nova is pleased to present a high level conceptual flowsheet for RPM processing that is being further developed with test work and engineering underway. This flowsheet demonstrates the capability to fully utilize the RPM resource combining Steinert Ore Sorting Technology, Heap Leaching and CIP/CIL. The high-level conceptual flowsheet is presented in Figure 6. The implementation of ore sorting technology is designed to allow for the upgrading of low-grade RPM mined ore to high grade concentrate appropriate to feed a CIP/CIL plant. The rejects from the ore sorter will then be heap leached in a suitably sized operation to maximize the recoverable gold from the RPM deposit. Additional engineering and economic trade-off studies will be conducted to determine the optimum size of the heap leach operation and CIP/CIL plant to achieve the best economic outcomes for the Estelle 6. High level conceptual flowsheet for Estelle RPM ore Qualified Persons The information contained in this report, relating to metallurgical results, is based on, and fairly and accurately represent the information and supporting documentation prepared by Mr Damian Connelly. Mr Connelly is a full-time employee of METS Engineering who are a Contractor to Nova Minerals Limited, and a Fellow of The Australasian Institute of Mining and Metallurgy. Mr Connelly has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Exploration Targets, Mineral Resources and Ore Reserves and as Qualified Person as defined in Regulation S-K 1300 under the Securities Act of 1933, as amended (S-K 1300). Mr Connelly consents to the inclusion in the report of the matters based on the results in the form and context in which they appear. About Nova Minerals Limited Nova Minerals Limited is a Gold, Antimony and Critical Minerals exploration and development company focused on advancing the Estelle Project, comprised of 514 km2 of State of Alaska mining claims, which contains multiple mining complexes across a 35 km long mineralized corridor of over 20 advanced Gold and Antimony prospects, including two already defined multi-million ounce resources, and several drill ready Antimony prospects with massive outcropping stibnite vein systems observed at surface. The 85% owned project is located 150 km northwest of Anchorage, Alaska, USA, in the prolific Tintina Gold Belt, a province which hosts a >220 million ounce (Moz) documented gold endowment and some of the world's largest gold mines and discoveries including, Nova Gold and Paulson Advisors Donlin Creek Gold Project and Kinross Gold Corporation's Fort Knox Gold Mine. The belt also hosts significant Antimony deposits and was a historical North American Antimony producer. Further discussion and analysis of the Estelle Project is available through the interactive Vrify 3D animations, presentations, and videos, all available on the Company's website. Forward Looking Statements This press release contains 'forward-looking statements' that are subject to substantial risks and uncertainties. All statements, other than statements of historical fact, contained in this press release are forward-looking statements. Forward-looking statements contained in this press release may be identified by the use of words such as 'anticipate,' 'believe,' 'contemplate,' 'could,' 'estimate,' 'expect,' 'intend,' 'seek,' 'may,' 'might,' 'plan,' 'potential,' 'predict,' 'project,' 'target,' 'aim,' 'should,' "will' 'would,' or the negative of these words or other similar expressions, although not all forward-looking statements contain these words. Forward-looking statements are based on Nova Minerals Limited's current expectations and are subject to inherent uncertainties, risks and assumptions that are difficult to predict. Further, certain forward-looking statements are based on assumptions management believes to be reasonable at the time such statements are made, including but not limited to, continued exploration activities, Gold and other metal prices, the estimation of initial and sustaining capital requirements, the estimation of labor costs, the estimation of mineral reserves and resources, assumptions with respect to currency fluctuations, the timing and amount of future exploration and development expenditures, receipt of required regulatory approvals, the availability of necessary financing for the Project, the availability of funding sources, the availability of collaborative relationships, permitting and such other assumptions and factors as set out herein. Apparent inconsistencies in the figures shown in the MRE are due to rounding. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: risks related to changes in Gold prices; sources and cost of power and water for the Project; the estimation of initial capital requirements; the lack of historical operations; the estimation of labor costs; general global markets and economic conditions; risks associated with exploration of mineral deposits; the estimation of initial targeted mineral resource tonnage and grade for the Project; risks associated with uninsurable risks arising during the course of exploration; risks associated with currency fluctuations; environmental risks; competition faced in securing experienced personnel; access to adequate infrastructure to support exploration activities; risks associated with changes in the mining regulatory regime governing the Company and the Project; completion of the environmental assessment process; risks related to regulatory and permitting delays; risks related to potential conflicts of interest; the reliance on key personnel; financing, capitalization and liquidity risks including the risk that the financing necessary to fund continued exploration and development. These and other risks and uncertainties are described more fully in the section titled 'Risk Factors' in the final prospectus related to the public offering filed with the Securities and Exchange Commission. Forward-looking statements contained in this announcement are made as of this date, and Nova Minerals Limited undertakes no duty to update such information except as required under applicable law. For Additional Information Please Contact Craig Bentley Director of Finance & Compliance & Investor Relations E: craig@ M: +61 414 714 196Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
7 minutes ago
- Yahoo
Cashew Nutshell Liquid Market worth $876.5 million by 2030 - Exclusive Report by MarketsandMarkets™
DELRAY BEACH, Fla., Aug. 4, 2025 /PRNewswire/ -- The report "Cashew Nutshell Liquid Market by Product (PF Resins, Epoxy Resins, Epoxy Curing Agents, Surfactants, Polyols, Friction Linings), Application (Adhesive, Coating, Foam & Insulation, Laminate, Personal Care, Fuel), Region (Asia Pacific, North America, Europe, Middle East & Africa, South America) - Global Forecast to 2030 ", Cashew Nutshell Liquid (CNSL) market size was USD 461.1 million in 2024 and is projected to reach USD 876.5 million by 2030, at a CAGR of 11.36% between 2025 and 2030. Browse in-depth TOC on "Cashew Nutshell Liquid Market" 300 - Tables60 - Figures260 - Pages Download PDF Brochure: The CNSL market is experiencing stable growth on an international level owing to the increased demand for bio-based and high-performance substitutes to petroleum-derived chemicals in many sectors. CNSL, which is a renewable phenolic oil, obtained as a by-product of the cashew production process, is used on a wide scale in coatings, adhesives, foam & insulation, friction linings and fuel additives, as a result of its superb thermal stability, chemical resistance, and reactivity. Applications to automotive parts, building materials, and industrial processing such as brake pads, corrosion-resistant coatings, and insulating boards are gaining popularity. CNSL is also an important raw product in manufacturing phenol-formaldehyde resins, epoxy curing agents, surfactants, and demulsifiers, a factor that has seen it being useful in the energy, transport, and personal care industries. As people are increasingly embracing sustainable and circular economic solutions, the use of CNSL in the formulation of fuel and lubricants is becoming prominent clean-burning and renewable energy solutions. Strict environmental regulations, high industrial demand for green chemicals, and specialty applications have contributed to making Europe the current leader in the global CNSL market. North America comes next, and its implementation is based on integrating CNSL in automotive and industrial applications and in line with the objectives of ESG, whereas the Asia Pacific is growing rapidly with the growth of industrial activities and sources of raw materials in countries, such as India, Vietnam, and Indonesia. The problems of supply dependency on cashew producing areas, uneven quality of raw CNSL, and the necessity to increase the size of refining operations encourage investing in value-added processing and regional production centers and foster sustainable sourcing and waste valorization behavior at the same time. The other product types is projected to be the fastest-growing segment, in terms of value and volume, of the global CNSL market. The other product types segment of the CNSL market, which includes demulsifiers, additives, and other specialty intermediates, is projected to be the fastest-growing category between 2025 and 2030, in terms of both value and volume. The demand in the bio-based performance chemicals market is spurred by the following factors: the rising demand in the oil & gas industries, mining industries, lubricants, and agrochemicals markets of bio-derived performance chemicals that are either biodegradable or renewable, is fairly complemented by CNSL-based chemicals existing in the market providing an alternative to synthetic additives. CNSL-based demulsifiers are emerging as a promising solution in the process of crude oil separation, as the latter have shown to be sufficient in subjecting emulsions and minimizing their harm to the environment. At the same time, CNSL-based additives are being used in lubricants, anti-corrosive lacquer, and special formulations due to their high thermal stability, oxidation resistance and surface activity. With the global chemical industry moving toward green chemistry, low-toxicity substances, and circular economy processes, the segment is experiencing intense adoption. R&D and product innovation is also broadening the functional application of CNSL derivatives, strengthening the position of this segment as the most vibrant and fastest increasing segment of the CNSL market. Request Sample Pages: The coatings segment accounted for the largest application of CNSL market, in terms of value, in 2024. Coating held the highest value application segment in the CNSL market for 2024, due to the excellent properties of CNSL (including chemical resistance, adhesion, water repellency, and thermal stability). Resins and modifiers with CNSL are applied in industrial, marine, and protective coatings and especially in markets with a sustainable, low-VOC orientation. These are materials appreciated in enhancing corrosion resistance and durability, particularly in metal structures and high performing environments. Nevertheless, the fuel application is expected to experience the most rapid growth in the period between 2025 and 2030, both in terms of value and volume. This has been stimulated by the rising trend on bio-based and clean-burning fuels worldwide, CNSL therefore has gained momentum as a prospective raw material for fuel additives and its renewable energy applications because of its high calorific value, controlled sulfur level, and clean burning characteristics. Asia Pacific was the second-largest region in the global CNSL market in terms of volume, in 2024. The Asia Pacific is the second-largest regional market in CNSL, which is attributed to the number of cashew nut producing nations, including India, Vietnam and Indonesia among others, which guarantees raw material provision and affordable source prices. With the increasing production of automobiles, construction, and mounting exposure to the environment, the region is experiencing an upsurge in the demand for CNSL in friction linings, like adhesives, personal care, and industrial coatings. Furthermore, rising investments in the cashew processing and CNSL refining plants are boosting the market presence of Asia Pacific in the realm of value addition products. The region is likely to become and continue to remain an important contributor to the global CNSL market during the forecast period with the increasing infrastructure, local manufacturing, and the movement toward bio-based solutions. Request Customization: Key Players The key players profiled in the report include Cardolite Corporation (US), GHW (Vietnam) Co. Ltd., Palmer International (US), LC Buffalo (Vietnam), Cat Loi Cashew Oil Production & Export Joint Stock Company (Vietnam), SENESEL sp. z o.o. (Poland), Zhejiang Wansheng Co., Ltd. (China), Cashew Chem India (India), Sri Devi Group (India), and ADMARK Polycoats Pvt. Ltd. (India). Get access to the latest updates on Cashew Nutshell Liquid Companies and Cashew Nutshell Liquid Market Size Browse Adjacent Market: Green Bio-Chemicals Research Reports & Consulting Related Reports: Coating Resins Market - Global Forecast to 2029 Bioplastics & Biopolymers Market - Global Forecast to 2029 Urea Market - Global Forecast to 2029 Ammonia Market - Global Forecast to 2029 Methanol Market - Global Forecast to 2030 About MarketsandMarkets™ MarketsandMarkets™ has been recognized as one of America's best management consulting firms by Forbes, as per their recent report. MarketsandMarkets™ is a blue ocean alternative in growth consulting and program management, leveraging a man-machine offering to drive supernormal growth for progressive organizations in the B2B space. We have the widest lens on emerging technologies, making us proficient in co-creating supernormal growth for clients. Earlier this year, we made a formal transformation into one of America's best management consulting firms as per a survey conducted by Forbes. The B2B economy is witnessing the emergence of $25 trillion of new revenue streams that are substituting existing revenue streams in this decade alone. We work with clients on growth programs, helping them monetize this $25 trillion opportunity through our service lines - TAM Expansion, Go-to-Market (GTM) Strategy to Execution, Market Share Gain, Account Enablement, and Thought Leadership Marketing. Built on the 'GIVE Growth' principle, we work with several Forbes Global 2000 B2B companies - helping them stay relevant in a disruptive ecosystem. Our insights and strategies are molded by our industry experts, cutting-edge AI-powered Market Intelligence Cloud, and years of research. The KnowledgeStore™ (our Market Intelligence Cloud) integrates our research, facilitates an analysis of interconnections through a set of applications, helping clients look at the entire ecosystem and understand the revenue shifts happening in their industry. To find out more, visit or follow us on Twitter, LinkedIn and Facebook. Contact:Mr. Rohan SalgarkarMarketsandMarkets™ INC.1615 South Congress 103, Delray Beach, FL 33445USA: +1-888-600-6441Email: sales@ Our Website: Logo: View original content: SOURCE MarketsandMarkets
