How low can a Ford Ranger Raptor go?
The burly bakkie was created to blast along faster than any other pickup, with trick suspension and knobby tyres that make it supremely capable as a high-performance off-roader. We've raced the Raptor along Namibia's sand dunes, diced it against hot hatches and generally (mis) treated it as the high-adrenaline machine it was purpose-built to be.
When we tested it at Gerotek with a Vbox, Ford's potent pickup sprinted from 0-100km/h in a hot hatch-like 6.7 seconds, making it the quickest bakkie we've yet tested — by quite some margin.
We hadn't spent much time driving it sedately, however, so to set that right we embarked on a fuel economy run as the first order of business when a dark grey Raptor arrived for a long-term test earlier this month. The fast Ford is a notorious fuel guzzler when engaged in high-paced pursuits, but we wanted to see how frugal it could be when driven with restraint, and a journey from Joburg to KwaZulu-Natal's south coast over the Easter weekend was the ideal opportunity.
In our previous test drives the Raptor returned an average fuel consumption of 14.9 l /100km, and a budget-busting 22 l /100km when driven in high-adrenaline mode. It had never come close to the factory-claimed 11.5 l figure.
When we set out from Joburg at 4am to beat the Easter weekend traffic, our goal was to drive the Raptor at regular speeds instead of crawling along in the left lane with all the trucks, and obtaining an unrealistically low economy reading. We kept to the speed limit and focused on maximising fuel efficiency with smooth driving and avoiding sudden accelerations. We drove in the vehicle's Normal mode, which kept the engine revving lower by spending more time in higher gears than in Sport. With 10 speeds, the automatic transmission has a lot of ratios and is able to tick along at low rpm at cruising speeds.
The temptation to exploit the bakkie's power was often strong, and the six-cylinder engine's 292kW and 584Nm are always bristling in the background. But except for one brief pedal-to-the-metal occasion when a cheeky Polo GTI driver needed schooling, we managed to drive with a light foot over the complete seven-and-a-half-hour trip. The Raptor arrived at the destination with a fuel average of 11.6 l /100km, a little better than we had hoped for, and showing what a difference it can make to drive with a focus on efficiency.
A few days later, for the uphill return trip to Gauteng, with an elevation gain of 1,600m we knew the Raptor would be less frugal but we aimed to get under 13 l /100km. Driving in the same smooth and steady way, we achieved our goal and arrived in Joburg with the on-board computer showing 12.6 l.
We felt this was pretty good for a V6 turbo bakkie that weighs more than 2.4 tonnes. Bottom line is that Ford's R1,270,000 plaything makes a good long-distance vehicle that doesn't slurp fuel like a truck if you drive it right.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles

IOL News
2 days ago
- IOL News
Model T of the electric era? Ford announces affordable EV family with 'revolutionary' assembly process
Big, heavy and expensive electric vehicles (EVs) have limited profit potential for Ford, its global CEO Jim Farley has previously stated. For that reason, the company is now shifting its focus towards smaller and more affordable EVs that better align with customer needs and cost structures. This new strategy will be underpinned by Ford's brand-new 'Universal EV Platform', designed to enable a family of affordable EVs that can be produced at scale. Instrumental in this plan is what it calls a more efficient assembly process. 'More than a century after the invention of the moving assembly line, Ford combines its industrial know-how with a start-up mentality to create the new Ford Universal EV Production System, radically simplifying vehicle assembly for safety, quality and speed,' Ford said at an event held at its Louisville plant in Kentucky on Tuesday. To achieve this, Ford transformed the traditional assembly line, which is essentially one long conveyor, into three sub-assemblies which run down their own lines simultaneously before joining together near the end. Large single-piece aluminium unicasings replace dozens of smaller parts, allowing the front and rear of the vehicle to be assembled separately. The battery forms the basis of the third sub-assembly, to which the seats, consoles and carpeting are assembled. Parts are moved down the assembly tree in a kit, which includes all the fasteners, scanners and power tools required by the operator, and in the correct orientation for use. Ford says the new platform reduces parts by 20%, with 25% fewer fasteners and 40% fewer workstations. Assembly time is also said to improve by 15%. See how it works in the video below:

The Herald
2 days ago
- The Herald
Should you take a chance on a 2011 Ford Ranger with 300,000km on the clock?
Join the Ignition TV Buyer's Guide team as they discuss whether a viewer should trade in his Kia Cerato for a 2011 Ford Ranger 3.0l Super Cab with 300,000km on the odometer.


The Citizen
2 days ago
- The Citizen
New Volkswagen Transporter range expanded with three models
Soon to arrive in South Africa as the replacement for the dated current T6.1, approval of the new variants hasn't been made. Seemingly still set to make its market debut before the end of the year, Volkswagen's Commercial division has introduced three additional versions of the new Transporter that could be availed for South Africa if confirmed. Now available in Germany, the new additions consist of a double cab dropside, the combination panel van called Panel Van Plus, and a panel van with a L-partition behind the steel bulkhead that separates the cabin from the cargo area. For the new double cab, the Transporter's loading area measures 4.2 m3 and the loadbin itself 2 169 mm long. The claimed payload is 1 073 kg and towing capacity 2 500 kg. As an option, the aluminium dropside bin can be done away for a chassis cab layout. Based on the same platform as the Ford Transit Custom/Toureno Custom, the double cab Transporter can be had with two versions of the Ford's 2.0-litre Panther turbodiesel engine; the 81 kW unit and the 110 kW. Connected to the former is a six-speed manual gearbox, with the latter solely paired to an eight-speed automatic, supplemented as an option with the 4Motion all-wheel-drive system. As an alternative, buyers can also opt for an electric version in three states of tune; 100 kW, 160 kW and 210 kW. In this instance, the battery is an 83-kWh module, though a smaller 64-kWh can also be specified. On the panel side, the Plus seats three instead of two on a newly incorporated bench seat, which has resulted in the steel partition having been dropped in favour of a plastic separator with an integrated window. As standard, the Panel Van Plus comes with a single sliding door on the passenger's side, however, a driver's side door can be fitted as a cost option. Finally, the L-shaped van seats four and sees the steel partition forming a box-type cradle behind the front passengers – being Germany, this means on the right-hand side instead of the left where the driver is seated. The result is the accommodation of longer items behind the driver, which slide underneath the seat using a special port hole at the lower section of the partition. Unlike the Panel Van Plus, the L-shape comes with the dual sliding doors as standard, the one on the passenger side with a window included. On the model front, both panel van models can be specified in PanAmericana trim level, with the Edition grade being an option for the Panel Van Plus. Up front, the same TDI and electric powertrains as the rest of the Transporter range applies, as does the plug-in hybrid not offered on the double cab. Using Ford's normally aspirated 2.5-litre petrol engine combined with an 11.8-kWh battery pack, the Transporter eHybrid develops 171 kW delivered to the front wheels through a uniquely configured eight-speed automatic 'box. Now on-sale in Germany priced from €38 525 for the Panel Van Plus, €39 990 for the L-shaped van and from €41 158 for the dropside double cab, Volkswagen South Africa is yet to make a formal announcement approving the new options for the local market. As it stands, only four variants have so far been given the go-ahead; the standard panel van, Crew Bus, Kombi and the Kombi Style which seemingly replaces the Caravelle. Exact pricing is expected to be announced soon. ALSO READ: No more hiding as Volkswagen sheds new Transporter's disguise