The smell of toasted rock could spell victory for geothermal energy
One recent day in a warehouse south of downtown Houston, I got a peek at something that just might revolutionize the clean energy transition: a molten orange puddle of instantly liquefied rock.
Moments before, an attendant loaded a slug of basalt under a metal-frame structure that looked like something a supervillain might point at a tied-up James Bond, and I was ushered behind a protective barrier. An order went out, the contraption began to whir, and we turned our focus to a TV screen, where the solid rock erupted in a blast of white light that overwhelmed the livestream camera.
One mustn't believe everything that appears on a screen, but then Carlos Araque, CEO and co-founder of advanced geothermal startup Quaise Energy, led us back to the rig, and there was the freshly blasted rock. A minute ago, it hit as much as 2,000 degrees Celsius, but the molten goop had already solidified into a crown of shiny obsidian. Heat radiated from it, warming my hand as I hovered it a few inches away. The air smelled like toasted marshmallows, if the marshmallows were made of stone.
The flashy demonstration was just one example of how startups are looking to revolutionize geothermal energy production. The U.S. built its biggest geothermal power-plant complex in 1960, but construction has stagnated for decades. Geothermal serves a mere 0.4% of U.S. electricity generation; its nearly 4 gigawatts of capacity amounts to roughly the solar and battery capacity Texas installs in four months these days.
The way out of this decades-long malaise may simply be down. The more subterranean heat a geothermal plant can access, the more energy it can generate, and the Earth gets hotter closer to the core. But the intense conditions below a few miles deep rapidly wreck conventional drill bits.
Araque figured that if he could build a strong enough drill bit, it could harness this super-deep heat and deliver cheap, clean, and abundant geothermal power, pretty much anywhere.
So he left a career in oilfield drilling and formed Quaise in 2018 to do exactly that. Or, more precisely, the company adapted the gyrotron, a tool honed by the nuclear fusion industry that emits millimeter waves, which fall on the electromagnetic spectrum between microwaves and infrared waves. Fusion researchers use them to heat plasma to unfathomably high temperatures. But these waves exert a dramatic effect on rock, so Quaise leadership repurposed them to bore through depths that would demolish conventional drill bits, and perhaps unlock a new golden age of geothermal.
Araque likened the technology to the familiar microwave oven, which heats food by zapping it with a particular band of electromagnetic waves that excites water molecules.
'Translate that into rock,' he said. 'Well, rocks love millimeter waves. You put millimeter waves into rock, they soak it up, they light up instantly.'
He first pitched me on his super-powered drill bit six years ago. At the time, it all sounded like science fiction, something that Massachusetts Institute of Technology researchers might study and venture capitalists might take a flyer on but that wouldn't materialize as real technology.
In fact, Quaise did spin out of an MIT lab, and it did raise venture capital for the idea — more than $100 million to date from Prelude Ventures, Mitsubishi, and others. Seven years into the project, however, here I was, smelling the deep, toasty scent of freshly bruleed rock. Deep geothermal energy suddenly seemed a little less like sci-fi and a little more plausible.
Still, Quaise has plenty more work to do before it can deliver its transformative promise — and that starts with getting out of the lab and into the field.
By the time I visited in late January, Quaise had been melting rock outside of the lab but on its own property for weeks. I personally witnessed rock-melting in two places: in the hangar, with a drill rig pointing the millimeter-wave beam at a target rock, and in the yard, where a contraption mounted on tank treads blasted into a rock sample placed in a concrete receptacle on the ground.
'This is the first demonstration of capability, outside, at full scale,' Araque said of the installation.
These tests are necessary to calibrate the novel combination of millimeter-wave emitter and conventional oil-drilling rig. (The Quaise founders know their way around that world, having come from drilling powerhouse Schlumberger.) Quaise proved it can transmit the waves while moving the device, something that the nuclear fusion folks never needed to test. The company's 'articulated wave guide' also showed it can achieve a consistent round shape for its borehole, at least over short distances.
The tests so far amount to the karate demonstration where someone chops through a stack of two-by-fours: Most impressive but not a commercially viable way to chop wood. The next step is obvious — Quaise needs to get out and drill into the earth. That's coming soon.
Quaise obtained a test site in north Houston where it can drill up to 100 feet underground. The 100-kilowatt gyrotron system I saw firing up in the warehouse has already been moved to this field site, where Quaise is connecting it to a full-scale drilling rig owned by partner Nabors Industries; its mast will soar 140 feet tall. Drilling should begin in April, cutting into an existing well stuffed with rock samples — outdoors but still a controlled environment.
Soon after, Quaise will swap that out for a new 1-megawatt system, delivering 10 times the power to speed up subsurface boring and maintain an 8-inch-diameter hole, bigger than the initial test holes. That device will use a comparable amount of power as is used by conventional drilling rigs, Araque noted.
Drilling 100 feet down is a start but far from sufficient. The company also secured a quarry site near Austin that provides the opportunity to drill nearly 500 feet through pure granite. Once the technology graduates to drilling thousands of feet, Quaise plans to piggyback on the existing drilling industry with its 'BYOG' approach.
'Bring a gyrotron, bring the waveguide, bring the power supply, plug it into the drilling rig,' Araque said. 'There's thousands of drilling rigs in the world. You just go and plug and play into them.'
If and when the time comes to drill for actual power plants, Quaise aims to ride conventional drilling technologies as far as they'll go. The plan is to hire traditional rigs to burrow through the first 2 to 3 kilometers of subsurface (up to nearly 2 miles) until the drill hits what's known as basement rock.
After hitting basement rock, Quaise will swap drill bits for its millimeter-wave drill and blast to about 5 miles deep in favorable locations — even that far down, some places have easier access to heat than others. Operators will pump nitrogen gas into the hole to flush out the dust from vaporized rock as the drill moves ever deeper.
Quaise leaders did not disclose a timeline for the company's first commercial deep drilling. At that point, Quaise will need to build an actual power plant and navigate the myriad permitting and transmission-connection hurdles that face renewables developers broadly. The company is running this development process in-house and already has multiple geothermal leases secured, a spokesperson noted.
In the meantime, a handful of other startups are making headway on commercial-scale geothermal plants, albeit with different approaches.
Fervo Energy has applied fracking technologies to geothermal drilling to make the process more efficient; after a successful 3.5-megawatt trial project in Nevada, the company began drilling the 400-megawatt Cape Station plant in Utah.
Closer in principle to Quaise, a Canadian startup called Eavor is developing ways to drill deeper than was economically practical before. Instead of reinventing the drill itself, Eavor defends it with insulation and 'shock cooling' to avoid crumbling in deep, high-temperature rock.
'Most oil and gas directional drilling tools are rated for 180C temperatures, [but Eavor's] insulated drilling pipe has a cooling effect on the tools making them work at even higher temperatures just by insulating the pipe,' a company spokesperson said in an email.
Eavor notched a big win in 2023, when it drilled a test well in New Mexico to depths of 3.4 miles and through rock as hot as 250 degrees Celsius. Now it's drilling a closed-loop project in Germany to generate 8.2 megawatts of electricity and 64 megawatts of heating.
Taken together, geothermal innovators like Quaise, along with the somewhat less science-fictiony enhanced geothermal startups like Fervo and Eavor, could produce the 'clean firm' power that energy modelers say is necessary to balance out cheap wind and solar in the quest to decarbonize the electrical grid.
'Advanced geothermal technologies could unlock a terawatt-scale resource that can deliver clean energy on demand,' said Jesse Jenkins, an authority on net-zero modeling and assistant professor at Princeton University. 'That would be an enormously valuable tool to have in our toolbox.'
Quaise could in theory supply those other geothermal innovators with a better type of drill to extend their range. But Araque insisted Quaise wants to be in the power generation business, not the widget business.
The company also has to manage an evident chokepoint in its development: those highly specialized gyrotrons. Quaise owns four, Araque said; the global gyrotron supply chain currently can't handle an order for 10 more. That's not an issue while Quaise works its way up to deep subsurface drilling, but the growth trajectory of the gyrotron suppliers could limit how much power-plant drilling the company can perform simultaneously in the future.
The work to extend from boring a few inches of rock to miles of it should not be underestimated, but Quaise has already crossed the more daunting chasm from never melting rock with an energy beam to doing so daily.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
13 hours ago
- Yahoo
Is Celsius Holdings Stock a Buy Now?
Celsius stock is up over 50% this year. The company acquired competitor Alani Nu in April. Celsius' revenue growth is set to recover, but mostly because of its purchase of Alani Nu. 10 stocks we like better than Celsius › After massive declines in the second half of last year, Celsius Holdings (NASDAQ: CELH) stock may finally be ready for a comeback. The company's rapid growth came to a sudden halt (at least temporarily) as sluggish demand led one of its major distributors (likely PepsiCo) to dramatically scale back its orders. The beverage stock is down over 60% since its peak in early 2024. Still, it is up over 50% since the beginning of the year. The question for investors is whether that recovery signifies the beginnings of a Celsius comeback, or whether investors need to stay on the sidelines. Celsius has carved out a compelling, lucrative niche within the energy drink industry. Instead of pursuing customers like its larger competitors, Red Bull and Monster Beverage, Celsius targeted fitness enthusiasts. It also participated in clinical studies to validate the health benefits of its beverages. Celsius' beverages first became available in 2009. However, it was its distribution agreement with PepsiCo in August 2022 that helped sales take off. Since that agreement in the third quarter of 2022, quarterly revenues have increased by 75% even after the recent slowdown in sales. Additionally, that figure does not account for Celsius' takeover of Alani Nu, which occurred in the second quarter of this year. Before that purchase, Celsius also claimed approximately 11% of the market share, putting it in third place in the energy drink market. Still, investors should remember that it leads the health and fitness-oriented niche in the market, which will likely make it a major force in this industry. Amid the stock's partial recovery, Celsius sells at a price-to-earnings (P/E) ratio of 127. Nonetheless, since it is recovering from last year's slump, the forward P/E ratio of 50 may better reflect the company's valuation, a level coming off historical lows. It is also well below the forward P/E ratio of 125 from the stock's peak in early 2024. That forward multiple arguably brings the stock price more in line with its current growth. Unfortunately, investors may still balk at Celsius' valuation as they brace for slower growth. In the first quarter of 2025, revenue of $329 million dropped by 7% yearly. That's a dramatic improvement over the 31% decline in Q3. Still, it is well below the 102% revenue gain in 2023. The falling revenue also led to a comprehensive income in Q1 of $37 million, well below the $63 million in the year-ago quarter. Revenue growth should improve in the near term due in part to the Alani Nu takeover. In 2025, analysts forecast 60% revenue growth. But once Celsius benefits from that one-time bump, they expect the revenue increase rate to slow to 21% in 2026. Knowing that, the most significant hope for bulls may lie in the company's potential internationally, where 96% of the world's population resides. Even though international sales made up 7% of revenue in Q1 2025, that part of the market grew revenue by 41% annually. Moreover, that revenue share was only 4% one year ago. Assuming it can continue to increase the proportion of international sales significantly, Celsius stock could deliver higher returns if revenue growth abroad remains strong. Over the long term, Celsius stock likely remains a buy. Admittedly, the 50 forward P/E ratio could point to some overvaluation in the near term. Furthermore, the immediate recovery in revenue will probably happen because of the buyout of Alani Nu, rather than an organic increase in Celsius brand products. Nonetheless, the 21% forecasted revenue increase in 2026 is an indication that demand will rise over time. Additionally, even though international growth will take some time, sales outside of North America are likely to become the company's primary revenue driver over time. Such potential indicates that Celsius' growth story is far from over, meaning its stock could still be positioned for huge gains. Before you buy stock in Celsius, consider this: The Motley Fool Stock Advisor analyst team just identified what they believe are the for investors to buy now… and Celsius wasn't one of them. The 10 stocks that made the cut could produce monster returns in the coming years. Consider when Netflix made this list on December 17, 2004... if you invested $1,000 at the time of our recommendation, you'd have $669,517!* Or when Nvidia made this list on April 15, 2005... if you invested $1,000 at the time of our recommendation, you'd have $868,615!* Now, it's worth noting Stock Advisor's total average return is 792% — a market-crushing outperformance compared to 171% for the S&P 500. Don't miss out on the latest top 10 list, available when you join . See the 10 stocks » *Stock Advisor returns as of June 2, 2025 Will Healy has positions in Celsius. The Motley Fool has positions in and recommends Celsius and Monster Beverage. The Motley Fool has a disclosure policy. Is Celsius Holdings Stock a Buy Now? was originally published by The Motley Fool Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data


The Hill
a day ago
- The Hill
As nations abandon climate goals, cities are more important than ever
A series of recent actions by the U.S. Environmental Protection Agency to roll back environmental regulations includes plans to eliminate all limits on greenhouse gases from coal and gas-fired power plants and to rescind the 2009 finding that planet-heating gases, like carbon dioxide, pose a real threat to human health. These rollbacks also come on the heels of recent proposals from the European Union, Australia and Canada to relax rules related to emissions and environmental protections. The overwhelming international scientific consensus is that if we are to limit global warming to 1.5 degrees Celsius, global net human-caused emissions of carbon dioxide need to fall by about 45 percent from 2010 levels by 2030 and reach net-zero around 2050. Unfortunately, current commitments from the international community through the Paris Agreement fall far short of reaching those goals. Despite the grim reality of weakened national ambition, cities continue to lead with bold and transformative climate action. Global cities are increasingly working collaboratively toward achieving carbon neutrality through innovative solutions and policy approaches that are replicable and scalable worldwide. Some have even set their sights on becoming climate-positive by removing carbon from the atmosphere to undo past emissions. New York City, which has committed to reducing its greenhouse gas emissions by 80 percent within the next 25 years, is one such example. It has developed a number of innovative approaches to reducing emissions, including offering a range of resources to help commercial and large-scale residential buildings with energy retrofits, expanding low-carbon transportation options and cutting emissions from all foods served in city-operated premises. At the same time, the Big Apple has invested over $20 billion to adapt neighborhoods to climate change risks such as flooding, heat, and sea-level rise. The City of Helsinki in Finland has announced its goals to be carbon neutral by 2030, zero carbon by 2040, and thereafter, carbon negative. It is working to achieve this by reducing embodied carbon in buildings by setting limits on the amount of carbon emitted by buildings over their entire lifecycle, including from the production and transportation of the building materials. Construction companies are working to stay under the limit by combining a range of solutions, including changes in the choice of materials, heating solutions and building operations, and repurposing and reusing building elements. Among other innovations, Helsinki's energy company Helen closed its last coal-burning plant in 2025 and is cutting emissions in Helsinki by 30 percent compared to 2024. Helen is also building one of the country's largest underground heat storage facilities in former oil storage caves. The facility is projected to reduce Helen's carbon dioxide emissions by 21,000 tons annually. In the Netherlands, Amsterdam's goal is to achieve a 60 percent reduction in emissions by 2030, and a 95 percent reduction by 2050. The city's Climate Neutral Program focuses on reducing carbon dioxide released within the city of Amsterdam by phasing out the use of fossil fuels such as oil, natural gas and coal and structurally transitioning to cleaner energy such as geothermal and solar. The city is also providing grants, loans and free advice to its citizens to help accelerate the energy transition and phase out the use of natural gas in homes. Vancouver, Canada, is another city taking the lead, reducing carbon pollution by 50 percent by 2030 and taking proactive action to prepare for and respond to the impacts of climate change. Its Climate Emergency Action Plan identifies a suite of actions focused on land-use planning, transportation and buildings. These actions collectively position Vancouver to reach three targets to cut carbon pollution from trips taken within the city: 90 percent of residents being within an easy walk, bike or roll of their daily needs, two-thirds of all trips being by active transportation or transit and 50 percent of all kilometers driven in Vancouver by electric vehicles. Two targets aim to cut carbon pollution from buildings in half from what it was in 2007 and to reduce embodied emissions from new buildings and construction projects by 40 percent compared to 2018. The Climate Change Adaptation Strategy provides a roadmap for addressing the top five climate change-related hazards that Vancouver faces. Sydney, Australia, has three long-standing business partnership programs. Through the Better Buildings Partnership, the city collaborates with property owners representing 55 percent of its office space. The partnership members have reduced emissions intensity by 95 percent. The CitySwitch program supports office-based businesses on their net-zero journey, and 80 percent of members have now switched to using renewable electricity. The Sustainable Destination Partnership brings together businesses in Sydney's accommodation and entertainment sector to reduce emissions, water, and waste. The programs all function as collaborative partnerships, with the city playing the role of convenor and facilitator. These cities are among 23 working together with my organization, Carbon Neutral Cities Alliance, to achieve carbon neutrality, not just through incremental improvements but rather through radical, transformative changes to core city systems. The goal is to demonstrate innovative solutions and policy approaches that are replicable and that can inspire other cities to take action to reach carbon neutrality as soon as possible. And, as cities learn from each other about what works to achieve these goals, they are paying it forward by sharing the work and encouraging other cities to take similar action. Why is the work of cities so vital to addressing climate change? Urban areas are responsible for an estimated 75 percent of all global greenhouse gas emissions. By setting and achieving these carbon neutrality goals, global cities have the ability to keep us on track toward the Paris Agreement climate goals despite wavering support from the U.S. and other governments. Most critically, these efforts are vital to offsetting the threat to natural systems and promoting the health and well-being of all its citizens. Simone Mangili is the executive director of The Carbon Neutral Cities Alliance.
Yahoo
2 days ago
- Yahoo
Powerful laser creates super ceramics in minutes that withstand 3,632°F
Ultra-high temperature ceramics are materials capable of withstanding temperatures exceeding 2,000 degrees Celsius (3,632 degrees Fahrenheit). Because they can endure such high temperatures, these materials are essential for nuclear reactor parts, spacecraft heat shields, and hypersonic vehicles. However, their manufacturing process is time-consuming and energy-intensive. It requires massive furnaces that can reach at least 2,200 degrees Celsius (3992 degrees Fahrenheit). Using lasers, researchers from North Carolina State University have found a way to produce ultra-high temperature ceramics within minutes. Using a 120-watt laser, the new method converts a liquid polymer precursor straight into hafnium carbide (HfC), one of the most heat-resistant substances available. The process begins in an inert environment, like a vacuum chamber filled with argon. Here, a laser is applied to a liquid polymer precursor. This solution contains the complete chemical mix required to form the final ceramic: hafnium and carbon. When the laser hits the precursor, the thermal energy from the laser converts the liquid polymer into a solid, which then directly transforms into the ceramic. The entire process, known as sintering, happens so rapidly that the researchers consider it a single-step process. This process can be used in two different ways to engineer the ceramic. The first way is to apply the liquid precursor as a coating to existing objects or materials, after which the sintering can be performed. This creates protective ceramic layers without exposing the entire structure to furnace heat. By preserving the integrity of the structure, this method holds promise for materials that might be sensitive to the furnace heat. Alternatively, the method can be integrated with 3D printing systems, similar to stereolithography. The laser is mounted on a movable platform that is placed on a vat containing the liquid precursor. The laser traces the design in the precursor layer by layer, gradually building a 3D ceramic object. This approach offers precision and control over the final design. The researchers used their laser sintering method to produce pure HfC as a proof-of-concept. They discovered that their method delivers a higher yield than conventional techniques. The sintering laser method converted at least 50% of the precursor mass into ceramic, compared to 20-40% for traditional methods. Greater yield results in reduced waste and improved resource efficiency. They also observed excellent bonding of HfC coatings on carbon-fiber reinforced carbon composites. The coatings covered the surface uniformly and bonded tightly to the structure below. "This is the first time we know of where someone was able to create HfC of this quality from a liquid polymer precursor," said Prof. Cheryl Xu, co-author of the paper, in a press release. This method is more portable than traditional furnace-based techniques, although it still requires a vacuum chamber. The findings of the study are published in the Journal of the American Ceramic Society.