Custom 1951 Ford Coupe Is A $1.4 Million Car
While this custom 1951 Ford Coupe looks cool, knowing it cost $1.4 million to build is shocking. After all, we know what kinds of supercars or hypercars you could buy with that kind of cash and that list is impressive, to say the least. But none of those are quite like this ride.A creation by Wicked Fabrication, this car has been featured in magazines, appeared at the 2016 SEMA Show in Las Vegas, was on Jay Leno's Garage, and won big awards, capturing the hearts of gearheads all over. You might have seen it before, but this review of the Ford by Autotopia LA helps dive into the details.
And there are plenty of details on this ride. As they say, that's where the devil resides and that's certainly true here. We're fond of saying it's the small things that separate the good builds from those that are truly excellent.
After the car made the media rounds, it quietly disappeared. It wasn't until years later the current owner just happened to be perusing a boutique car dealer's inventory, noticing this '51 Ford sitting among far lesser rides.
If you look at the car versus other '51 Ford Coupes, you'll notice it looks far different and quite frankly much better. The top isn't chopped, it's been pancaked about 1.5 inches. Wicked Fabrication did wedge suction the car, cutting out 5.5 inches from the front and 2.5 inches in the rear, which is in large part why it looks so much sleeker.
The shop fabricated a new hood out of aluminum, which also takes some of the bubbly ugliness out of Ford's original design. Other details were added to gain the appearance of a period racecar.
They absolutely nailed it, but apparently after it left Wicked Fabrication the car was neglected. The current owner put in the effort to bring it back up to show car standards and it looks absolutely amazing. If you watch the video, you'll learn about so many of the details, it's a good way to spend half an hour.
Images via Autotopia LA/YouTube
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Fast Company
2 hours ago
- Fast Company
The NHTSA announces a Ford recall affecting 100,000 F-150 pickup trucks
The recall is for Ford's F-150 models made between 2023 and 2025. A Ford F-150 pickup truck is seen on the assembly line at Dearborn Truck Plant in Dearborn, Michigan, U.S. April 11, 2024. [Photo: Rebecca Cook/Reuters, File] BY Ford is recalling more than 103,000 F-150 pickup trucks in the U.S. over axle bolts that may break and result in vehicle rollaways or a loss of drive power, the U.S. National Highway Traffic Safety Administration said on Tuesday. A broken axle bolt can damage axle hub splines — components that transfer power from the axle to the wheels and help them rotate. Damaged splines can cause vehicles to roll away when in park without the parking brake engaged or result in a loss of drive power, increasing the risk of a crash, the U.S. auto safety authority said. The report said that if the rear axle bolt becomes loose, customers may report a clicking noise. If the bolt breaks, they may hear a rattling noise. As a remedy, dealers will replace the rear axle shaft assemblies, free of charge. The recall affects Ford's F-150 models between 2023 and 2025. NHTSA estimates about 1% of the vehicles have the defect. —Harshita Meenaktshi and Aishwarya Jain, Reuters The early-rate deadline for Fast Company's Most Innovative Companies Awards is Friday, September 5, at 11:59 p.m. PT. Apply today.


The Verge
4 hours ago
- The Verge
Ford is doubling down on EVs — the timing is awful
On Monday, Ford introduced an innovative new manufacturing process that it says will help make its EVs more sustainable, more desirable, and more importantly, more affordable. The timing couldn't have been worse. EV tax credits were set to expire at the end of September. President Trump's trade war was tilting the balance in favor of China's EVs. And automakers are beginning to delay and even cancel some planned models. Ford seems to realize its timing is unfortunate. Throughout their announcement, the company's top executives kept hammering one salient point: this was going to be really hard, success was far from guaranteed, and in fact they could even fail. 'Why do I say bet?,' said Ford CEO Jim Farley, dressed in a reflective yellow vest while surrounded by dozens of the company's Louisville factory employees. 'That's an intentional word, because there are no guarantees with this project. We're doing so many new things. I can't tell you with 100 percent certainty that this will all go just right. It is a bet.' Farley is right to hedge. As he correctly noted, 'the automotive industry has a graveyard littered with affordable vehicles that were launched in our country with all good intentions.' Affordable EVs, in particular, are incredibly difficult to build in the US. American buyers have become used to a certain of hugeness. We like our trucks big, our range limitless, and our cargo capacity herculean. And a truly affordable EV, one priced somewhere in the $25,000-$30,000 range, would likely need to be smaller, slower, and less capable by definition than most of the two- and three-row SUVs currently dominating the EV market. We saw a little bit of this with Slate Auto's truck, which claims to reach its 'mid-twenties' starting price by stripping out features most people have come to expect in a new vehicle, things like a touchscreen, a cellular connection, a working stereo, and exterior paint options. Ford isn't ready to go down that road yet. Instead, its cost savings from come from two central places: the manufacturing process, and the battery. Ford is following Tesla's lead in adopting a system that relies on unicasting system that creates massive pieces of the vehicle's underbody, helping to save time and cut down on the costs associated with manufacturing. There will be more automation, meaning some Ford workers are going to be offered buyouts or transferred to other facilities. These EVs will simply require fewer people to put them together. 'We're doing so many new things. I can't tell you with 100 percent certainty that this will all go just right.' The battery, in particular, could put Ford in a tough spot. The company didn't offer many details except to say that the new midsized truck, which will be the first vehicle produced by this new system, will have a battery that is 15 percent smaller than a BYD Atto crossover. BYD offers the Atto in two battery configurations: a 49.92 kWh pack and a 60.48 kWh pack. That could mean Ford is looking at a battery with 51 kWh capacity, smaller than first-gen the Chevy Bolt's 57 kWh pack. That's tiny, especially by today's standards of EVs with 300-miles-plus of range. It will be enormously difficult for Ford to sell an EV with a middling range estimate for more than $30,000. And let's be real, it's probably going to end up being a lot more than $30,000 when the truck arrives in 2027. That's because the Trump administration and Congressional Republicans are actively dismantling every policy that aims to help make EVs more affordable to customers. Ford won't be able to count on any tax credits or incentives to help bring the price of its new EVs down any more than what the automaker can eke out with its own manufacturing efficiencies. 'The environment for electric vehicles has gotten far more challenging in the U.S. market this year, and the global EV environment is facing increasing domination from Chinese automakers,' said iSeeCars Executive Analyst Karl Brauer. 'Given these realities I'm not convinced any U.S. automaker can succeed as an electric vehicle producer.' Ford hasn't had any luck on bringing its current EV costs into more alignment. The company lost over $5 billion on EVs and software in 2024, and it predicts that will take a similar hit this year. Farley likes to talk about challenging China in its EV dominance. But he's also been more candid about the enormous deficit between that country and the US when it comes to manufacturing and technology. China's EVs are 'far superior' to what American companies have been able to produce, he said last month. And he described China's rapid rise in the EV market as the 'most humbling experience' of his career. In Louisville, he sounded a lot more optimistic than he has in the past. 'No more compliance cars,' he said. 'No more loss leaders that require a big check from the company to make. We're talking about a vehicle that can sustain itself, have strong profits, so all of our workers and the community here has actually a sustainable future.' Turning those words into reality will be the biggest challenge of Farley's career. And it could mean the difference between a Ford that's thriving, or one that's just a footnote. Posts from this author will be added to your daily email digest and your homepage feed. See All by Andrew J. Hawkins Posts from this topic will be added to your daily email digest and your homepage feed. See All Cars Posts from this topic will be added to your daily email digest and your homepage feed. See All Electric Cars Posts from this topic will be added to your daily email digest and your homepage feed. See All Ford Posts from this topic will be added to your daily email digest and your homepage feed. See All Transportation
Yahoo
4 hours ago
- Yahoo
Ford announces plans for $30k EV pickup with major US investment
Ford has revealed plans to introduce a new family of affordable electric vehicles (EVs) by 2027, headlined by a midsize four-door electric pickup with an anticipated starting price of around $30,000. The electric pickup vehicle is poised to be assembled at the company's Louisville assembly plant, which will cater to both the US and export markets. Switch Auto Insurance and Save Today! Great Rates and Award-Winning Service The Insurance Savings You Expect Affordable Auto Insurance, Customized for You The automotive giant is committing nearly $2bn to transform and expand the Louisville facility by 52,000ft2 in order to support material movement. This investment is bolstered by an incentive from the Kentucky Economic Development Finance Authority and is expected to preserve 2,200 hourly jobs. Ford's investment in Louisville is part of a larger $5bn commitment that also includes the BlueOval Battery Park Michigan, US. This facility will commence production of prismatic lithium iron phosphate (LFP) batteries for the midsize electric truck next year. Collectively, these investments are projected to create or maintain close to 4,000 direct jobs and establish a network of new suppliers based in the US. Ford noted that the new Ford Universal EV Platform, as well as the EV Production System, was developed by an EV software and hardware "skunkworks team' based in California, US. The platform is said to simplify the assembly process with fewer parts and fasteners, resulting in a 15% quicker assembly time. It will feature cobalt-free and nickel-free LFP prismatic batteries that double as the vehicle's floor, enhancing interior space, handling, and cabin quietness. Ford's upcoming midsize truck is expected to offer more passenger room than the current Toyota RAV4 and will boast a 0-60 time comparable to a Mustang EcoBoost, stated the company in a release. Further details, such as the date of reveal, Environmental Protection Agency (EPA)-estimated battery range, and charge times, will be announced later. Ford CEO and president Jim Farley said: 'We took a radical approach to a very hard challenge: Create affordable vehicles that delight customers in every way that matters – design, innovation, flexibility, space, driving pleasure, and cost of ownership – and do it with American workers.' In its financial report for the second quarter of 2025, Ford disclosed a net loss of $36m, primarily attributed to special charges and costs related to the cancellation of an electric vehicle programme. "Ford announces plans for $30k EV pickup with major US investment" was originally created and published by Just Auto, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data