China's SMIC may have used older lithography gear to build Huawei's new 5nm chip
China's largest foundry, SMIC, is also the third-largest foundry in the world. Thanks to U.S. and Dutch sanctions, the foundry cannot obtain cutting-edge lithography machines. Without the ability to use extreme ultraviolet lithography machines (EUV) to transfer circuitry patterns to silicon wafers, SMIC was believed to be limited to producing chips using its 7nm node. We are now in the middle of an interesting mystery.
Huawei's new Mate Book Pro laptop runs HarmonyOS and is powered by the Kirin X90 chip designed by Huawei's HiSilicon chip design unit. One leaker says that the X90 is a repurposed Kirin 9010 with a different layout of the CPU cores. We should know for sure sometime over the next few days when in-depth reviews of the chip are expected to be released. The Kirin 9010 AP was used to power Huawei's photography-based Pura 70 flagship series that was released in April 2024 and it was built using SMIC's 7nm N+2 process node.
Did SMIC really build a 5nm chip using DUV? | Image credit-X A tweet on "X" from leaker @Jukanlosreve credited Chinese state-run broadcaster CCTV with running the report about the 5nm node for the X90. Another X user, @zephyr_z9, claims that the Kirin X90 has a transistor density of 125 million transistors per mm2. That makes it less dense than TSMC's 5nm node (approximately 138 million transistors per mm2) but close to the density used with Samsung Foundry's 5nm node. What makes this amazing is that it appears to have been achieved using a DUV machine.
Not all of the numbers were positive. One analyst reportedly discovered that SMIC is producing 3,000 wafers per month with an extremely low 20% yield. Most foundries want to see a minimum yield of 70% before starting mass production of a chip.
Despite the anemic yield, if SMIC is able to produce 5nm chips using DUV, this will worry U.S. lawmakers who have been concerned about Huawei's ability to design cutting-edge silicon for the Chinese military and AI even with U.S. sanctions.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
GSM Arena
3 hours ago
- GSM Arena
iQOO 15 screen and camera specs tipped
The iQOO 13 was among the first phones to launch with Qualcomm's Snapdragon 8 Gen Elite when it made its debut in late October of last year and expectations are that its successor will launch around the same time this fall. Digital Chat Station went ahead and shared some preliminary specs for the device, which will apparently be called iQOO 15. As per the post, the iQOO 15 will feature a Samsung-made 6.85-inch "2K" display. This is most likely an LTPO AMOLED panel, and the tipster suggests that it will utilize the LIPO (low injection pressure overmolding) display packing process, which helps reduce display bezels. Aside from the fancy new display, iQOO 15 is expected to offer a periscope camera module, which would be an upgrade from the 2x telephoto found on its predecessor. Previous rumors also suggest a 7,000mAh battery. vivo iQOO 13 Source (in Chinese) | Via
GSM Arena
4 hours ago
- GSM Arena
Huawei tipped to make 3nm chips in 2026
Huawei is developing a true 5 nm production line without the need for EUV lithography machines. Furthermore, 3 nm chips are already in the R&D stage, with plans to start production by 2026, according to a report by UDN. Huawei cannot use standard EUV technology, as it is patented by the Dutch company ASML, which is banned from working with the Chinese manufacturer. Instead, the company is using SSA800 lithography machines with multi-patterning, made by Shanghai Micro Electronics (SMEE). Research and development for 3nm chips are following two approaches: one is GAA architecture (the standard one, used by TSMC and Samsung), and the other is a carbon nanotube-based chip that has already completed lab validation and is now being adapted for SMIC's production lines. Earlier this month, the Huawei Matebook Fold arrived, powered by Kirin X90. While the company calls it a "5nm chip," it is actually a 7nm design with advanced packaging technology. It brings performance on par with other 5 nm chips, but the yield is only 50%, which is extremely low, making the chip more expensive to manufacture. Source
GSM Arena
5 hours ago
- GSM Arena
vivo unveils Pad5, but we've seen it before
The vivo S30 series was introduced yesterday and alongside them the company introduced a new tablet. The vivo Pad5 tablet is identical to the iQOO Pad5, down to the memory configurations and prices. The one and only difference between the vivo-branded Pad5 and the iQOO-branded Pad5 is the available colors. The vivo Pad5 comes with a Dimensity 9300+ chipset, coupled with three RAM variants (8/12/16 GB) and three storage options (128/256/512 GB), split into four memory combinations. The tablet's built around a 12.1' LCD with a refresh rate of up to 144 Hz and a resolution of 2,800 x 1,968 px. The circular camera island features a single 8 MP camera. The front camera, which is arguably the more important one, has a 5 MP sensor. This vivo Pad5 features a 10,000 mAh battery that can theoretically provide over 8 hours of video calls. It's also great for note-taking, as it supports a cover keyboard and a stylus, along with some AI capabilities offered by OriginOS 5. vivo Pad5 The vivo Pad5 is available in Blue, Pink, or Black and costs CNY 2,499 ($350/€310) for 8/128 GB, CNY 2,799 ($390/€350)for 8/256 GB, CNY 3,099 ($430/€380) for 12/256 GB, and CNY 3,499 ($485/€430) for 16/512 GB. We don't expect this tablet to ever be sold outside China. Source (in Chinese)
