logo
MakeMyTrip completes share repurchase to cut China-based Trip. com's stake

MakeMyTrip completes share repurchase to cut China-based Trip. com's stake

Time of India04-07-2025
Academy
Empower your mind, elevate your skills
Nasdaq-listed MakeMyTrip has completed repurchase of over 3.4 crore Class B shares held by China-based Trip.com, bringing down the latter's voting power in the travel booking platform to 16.90 per cent from 45.34 per cent.The Gurugram-headquartered MakeMyTrip informed the US stock exchange that three Trip.com-nominated directors have resigned with immediate effect following the completion of the repurchase, as the number of Trip.com nominated directors on its Board has been reduced from five directors earlier, to two directors pursuant to the Terms of Issue of the Class B shares."On July 2, 2025, MakeMyTrip completed the repurchase of 34,372,221 Class B shares in MakeMyTrip from Trip.com Group Limited pursuant to the amended and restated share repurchase agreement dated June 23, 2025 between MakeMyTrip and Trip.com. All of the 34,372,221 Class B shares repurchased from Trip.com by MakeMyTrip have been cancelled," MakeMyTrip informed in the filing.Following the completion of the repurchase, MakeMyTrip has a total of 95,383,399 shares outstanding, comprising 89,851,697 ordinary shares, 5,295,690 Class B shares and 236,012 ordinary shares held as treasury shares (of which Trip.com holds 10,773,694 ordinary shares and 5,295,690 Class B ordinary shares, representing approximately 16.90 per cent of the voting power in MakeMyTrip), the company stated.MakeMyTrip's board of directors will continue to consist of ten members, comprising three management directors, four directors (including one Mauritius resident director) who will qualify as Independent Directors (as defined in the amended and restated investor rights agreement dated April 26, 2019 between MakeMyTrip and Trip.com), one other Mauritius resident director and two directors nominated by Trip.com.Regarding the changes in composition of its Board, MakeMyTrip informed that three Trip.com nominated directors including James Jianzhang Liang, Moshe Rafiah and Paul Laurence Halpin have each notified the board of directors of MakeMyTrip of his intention to resign as a Trip.com-nominated director with effect from the completion of the repurchase. The board of directors of MakeMyTrip accepted their resignations with immediate effect.The board of directors of MakeMyTrip approved the appointment of Vivek N Gour, Savinilorna Payandi Pillay Ramen and Mohit Kabra (its Group Chief Financial Officer) as directors with effect from July 2, 2025, the travel booking platform said.
Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

In industrial belt near Delhi, Trump's tariffs cloud outlook for export of engineering goods
In industrial belt near Delhi, Trump's tariffs cloud outlook for export of engineering goods

Indian Express

time12 minutes ago

  • Indian Express

In industrial belt near Delhi, Trump's tariffs cloud outlook for export of engineering goods

In one of the many cavernous sheds dotting Ghaziabad, the industrial suburb on the outskirts of the Capital, a giant stands silent. The massive metal forging machine, hauled from China only months ago at a cost of Rs 20 crore, glints under the dim factory lights, its steel body collecting a fine coat of dust. It was meant to be the future: sleek, electric-powered, capable of shaping metal with precision and scale. Yet, in its shadow, the old ritual continues. A knot of workers, sleeves rolled, faces flushed with heat, gather around a much smaller press, striking molten metal with steady, rhythmic blows. The clangs echo through the workshop like the heartbeat of an older era. For Ghaziabad-based CD Industries, a manufacturer of metal flanges feeding oil and gas exploration rigs across the US, the dormant machinery was supposed to answer the shifting demands of its overseas clients. Instead, it waits, inert. 'Baal mundwaate hi ole padne lage (It started raining hail stones as soon as one got his hair shaved),' Pankaj Agarwal, Director, CD Industries, told The Indian Express at his manufacturing plant in one of Ghaziabad's biggest industrial belts on the Bulandshahr Road. Agarwal had purchased the electric metal forge to exclusively service client requests from the US, who had asked him to make flanges of up to 16 inches, as opposed to his current capacity of eight-inch flanges. But, with US President Donald Trump's decision to raise tariffs on several Indian goods – to 25 per cent, with a further 25 per cent increase threatened by August 27 – new orders have dried up for Agarwal, and many engineering goods exporters like him. Increasingly, several US-based vendors are even cancelling earlier orders, resulting in significant financial losses for several Indian medium and small enterprises. Engineering is the largest industrial sector in India and accounts for 3.53 per cent of the country's Gross Domestic Product (GDP). The engineering goods export of India had a share of 25.22 per cent out of the total exports during the financial year FY24, as they jumped to $109.22 billion as compared to $106.93 billion during FY23. In FY25 (April to December), India's top five export destinations in the sector were the US (15.82%), the UAE (7.36%), Saudi Arabia (5.24%), Singapore (4.46%) and Germany (3.52%). Industries like auto components and metal works are particularly at a disadvantage. For CD Industries, the US is its exclusive export market, accounting for 50 per cent of the company's turnover. 'While we are continuing to deliver the previously placed orders, new enquiries have stopped coming in. For some companies, their previous orders have been cancelled, as importers are seeking a discount, which many manufacturers are not in a position to accept,' Agarwal said. His products are supplied across the length and breadth of the US, from the West Coast to the East Coast, and Texas to New York. 'The tariff situation is bothering us, haunting us, and we are really, really worried,' he said. His plant in Ghaziabad employs 225 people, including floor workers, project managers and quality control managers. For now, he says the older orders not getting cancelled – a fact he attributes to his long-standing relationship with his vendors, dating back 20 to 30 years – has allowed him to not trim the workforce. But if the situation continues for a longer time, he may have to let go of some workers, Agarwal said. Sanjeev Sachdev, general secretary of the Industrial Area Manufacturers' Association in Ghaziabad, said there are more than 400 manufacturing plants in the belt, which employ over 75,000 people. 'If the tariff situation is not resolved, and the government does not alternatively help the industry financially in the meantime, easily 5,000-7,000 people will lose their jobs. Many companies, who have purchased raw material and made finished goods, are staring at generations getting into debt,' Sachdev said. Pankaj Chadha, chairman of the Engineering Export Promotion Council (EEPC) of India, said about $5 billion worth of engineering goods exports are at risk due to US tariffs. 'Unlike other sectors, for us the pain started early on when the US announced 50 per cent tariffs on steel and aluminium. At this tariff rate, we cannot be competitive and we are not in a position to retain our market share in the US,' he said. Sachdev speaks with the quiet fatalism of someone who is anticipating to see too many balance sheets bleed red. Between raw metal and a gleaming finished part lies a steep markup – not just in price, but in labour, skill, and the hours of heat and noise that shape it. Yet that value can vanish in an instant. If an overseas buyer pulls the plug, the goods, tailored to a single client's specifications, are suddenly orphaned, with no other market to call home. In that moment, there are only two doors left open: swallow the buyer's demand for a deep discount, or consign the work to the scrap heap, where months of craft and capital dissolve into a fraction of their worth. For some manufacturers, it is not just a bad deal – it is the slow tightening of a noose. One too many of such blows, and the factory floor falls silent. Many in the industry, who spoke on condition of anonymity, warned that the real weight of the new tariffs will fall not on the industry's giants, but on the small and medium enterprises. The big players can simply pivot, scouting for new markets, absorbing the shock with the comfort of deep reserves. For the smaller firms, there is no such cushion, no easy escape route. The blow, when it lands, goes straight to the bone. Agarwal, Chadha and Sachdev, all said that the government's help to support companies in distress is the need of the hour. 'We expect the government to extend Remission of Duties and Taxes on Exported Products (RoDTEP) to the steel sector and restart the interest subvention scheme to ease the pain,' Chadha said. Vinod Kumar, president of the India SME Forum, said that export-focused countries like China have heavily invested in promoting their products globally. 'India has not done that over the years. This is a systemic problem. The nature of trade has changed over the years. Only production is not going to solve your problem, we have to market them effectively,' he said.

NHAI nod to alter road construction
NHAI nod to alter road construction

Time of India

time42 minutes ago

  • Time of India

NHAI nod to alter road construction

Thiruvananthapuram: In the wake of a retaining wall collapse at Kooriyad in Malappuram district, National Highways Authority of India (NHAI) approved a revised construction method for two sections of NH 66 in the capital district. The changes will be implemented at Pallipuram near Technocity and Mamom bridge near Attingal, where the highway passes through low-lying paddy fields. Pune-based RKC Infrastructure Ltd, the contractor for Kazhakkoottam-Kadampattukonam stretch, submitted a proposal to NHAI recommending a shift from the originally planned elevated embankment construction to a surface-level road. The contractor cited both environmental sensitivity and structural safety for the modification. "Instead of constructing retaining walls, the road will now be built at surface level to minimise soil pressure and improve long-term stability in the marshy terrain," said a source familiar with the project. However, despite intermittent rains, the construction was nearly 50% completed and is expected to be completed in May 2026. "The ambitious project includes construction of Attingal bypass, which is in full swing. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like The 5 Books Warren Buffett Recommends You To Read in 2025 Blinkist: Warren Buffett's Reading List Undo The work gained momentum last month. Except for new proposals at Mamom and Pallipuram, the works are going on at a fast pace. The work at Kazhakkoottam and Kallambalam side are going on simultaneously and also at Attingal bypass. Though there is shortage of soil and red earth, we are setting up a new unit soon to ensure that the materials are easily available and to avoid dependency on quarry units in Tamil Nadu. Approval for the new unit has been accorded. Currently, we procure materials and aggregates from a unit at Vellalloor," an RKC Infrastructure official told TOI. Construction work on this critical corridor has been ongoing since May 2025. In total, 13.8km of service road is being developed alongside the main highway, of which nearly 9km has been surfaced. RKC officials have assured that the remaining 4.8 km of tarring will be completed soon. Originally scheduled for completion in Jan 2025, the deadline extended to Oct 2025 and the contractor recently requested a further extension to March 2026, a request deemed unacceptable by both NHAI and state govt. Once fully completed, the 29-km upgraded NH-66 corridor will include four flyovers, 36 culverts, six minor bridges, three vehicle overpasses, five vehicle underpasses, six light-vehicle underpasses, four small-vehicle underpasses, three cattle underpasses, a parallel service road, 20 bus bays and a pedestrian overbridge across the 11.15-km Attingal bypass. Stay updated with the latest local news from your city on Times of India (TOI). Check upcoming bank holidays , public holidays , and current gold rates and silver prices in your area.

From The Hindu, August 18, 1975: Boom days no more for Dubai gold dealers
From The Hindu, August 18, 1975: Boom days no more for Dubai gold dealers

The Hindu

timean hour ago

  • The Hindu

From The Hindu, August 18, 1975: Boom days no more for Dubai gold dealers

Dubai, Aug. 17: This little Sheikhdom's once-active gold smugglers have run into rough times, victims of high international prices and an Indian crackdown. Dubai alone imported a good chunk of the non-communist world's gold production of 258 tonnes in 1970. Five years later imports have dropped to only five tonnes. In the boom days, most of the gold was minted in London and Zurich into small bars, airfreighted to Dubai and loaded in Arabian dhows of timeless design. The dhows sailed through the Arabian Sea to slip the precious metal into India and Pakistan for sale to black-market dealers. But those days are gone, at least for the time being. 'There are really three reasons why the gold has dwindled almost to nil here,' said a banker formerly engaged in the trade. 'There has been pressure from India, the fluctuations in the world gold price have put the risk up and the business expansion here has provided other outlets for speculative investment.' A Pakistani took time off from his new job of dealing in steel bars, portland cement and gold in Dubai's stock and commodity exchange to explain: 'The financial risks in smuggling gold to India are now three times greater than they were five years ago.' A Dubai-based smuggler could make an average 10 per cent net profit on each trip. Making several trips a month, he could soon double his stake. While the price of gold on the Indian black market has gone up, it has not kept pace with the world price. The dhows now carry expensive watches and luxury fabrics. But this trade too has suffered a recession, with ringleaders in the smuggling network being rounded up. 'You can't totally stop it,' said an Indian diplomat here. 'It has always gone on and it will always go on.'

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store