Amp grows focus on custom MSW sortation offerings
Amp, known for its AI-powered sortation technology for recycling, is planning to expand one of its newer offerings: MSW processing.
Amp has been 'quietly' ramping up its MSW diversion offerings for the last few years, namely through its Amp One sorting technology, said CEO Tim Stuart. Now, such MSW sorting offerings are a growing part of the company's portfolio, he said during an interview at WasteExpo in May.
The Amp One system, designed to be co-located with landfills and transfer stations, can separate bagged trash into mixed recyclables, organics and residue streams. The ramp-up comes a few months after Amp announced it had raised $91 million in series D funding in an effort to accelerate Amp One system deployments.
'We're very confident that we can get maybe a half a dozen of these facilities going over the next three or four years,' he said.
One such project is a partnership with the Southeastern Public Service Authority, which handles waste management for eight localities in the region of Portsmouth, Virginia. Amp was already operating a pilot facility there as a partnership with Recycling and Disposal Solutions.
Portsmouth officials announced earlier this month that SPSA would partner with Amp to offer the MSW sorting services on a broader regional scale. Stuart estimates the existing Amp One system was processing 30,000 to 40,000 tons of MSW a year, but the new agreement with SPSA would process the authority's estimated 500,000 tons of MSW a year.
SPSA solicited proposals last year for disposal diversion solutions due to the closure of the nearby WIN Waste Innovations waste-to-energy plant. At the height of operations, the plant diverted more than 70% of the region's trash from the landfill in nearby Suffolk, the Smithfield Times reported. At the time, the authority estimated that landfill would reach capacity by 2060 unless it pursued diversion options.
Amp says it will achieve about a 50% diversion rate for SPSA's material. Amp will operate the facility at a certain per-ton processing rate, but SPSA will still own the material.
Amp is in talks to install custom Amp One systems in a handful of other 'large municipalities' either through an RFP or pilot agreement, particularly in regions that have landfill constraints. Amp also plans to work with private haulers that don't internalize their own material, he said.
'There's a ton of municipalities that want more diversion. They want a longer life on their landfills, so this is meant to be good for the environment and good for the economics of things,' he said. 'It's an important component of the business, because by attacking MSW, it's just another way to recycle.'
Recommended Reading
Waste Connections to build its first MRF in Colorado in partnership with AMP
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
4 days ago
- Yahoo
Major development units planned for two Pembrokeshire towns
Three separate applications for 'battery box' units to provide electricity storage during off-peak times have been submitted to Pembrokeshire planners. The three schemes, all made by AMP Clean Energy, seek permission for micro energy storage unit 'battery boxes' on land between Steynton Road and Sheffield Drive and Castle Terrace and Pill Road, Milford Haven; and on a verge at Fishguard Leisure Centre Car Park. A supporting statement accompanying each application says: 'AMP Clean Energy is developing Battery Boxes across the UK to provide a low carbon, flexible and de-centralised store of electricity that benefits local communities, businesses, and homes.' It says the battery boxes import electricity from the local electricity network when demand for electricity is low or when there are high levels of renewable energy available, exporting it back during periods of high demand to help address grid reliability issues prompted by an increase of intermittent (wind and solar) generation of the electricity system. Read more Trial of overnight motorhome and campervan parking in Pembrokeshire approved New holiday lodge plans in Pembrokeshire given green light Plans to build 20-metre high 4G mast near Tenby AMP Clean Energy says it is developing up to 1,250-plus Battery Boxes in the UK over the next three years and, to date, has received planning consent for more than 80 such schemes across the country. It says each box, which takes up roughly two car parking spaces, stores 800kWh of electricity, giving the potential to power 200 homes for four hours where there is a disruption to supply. The statement adds: 'The UK's electricity system was traditionally dominated by a small number of large power stations fuelled by fossil fuel (namely coal and natural gas). However, the system is now becoming increasingly supplied by intermittent sources of renewable energy such as wind and solar power. 'Renewable power generation does not always match when the demand for electricity is highest. To overcome this, we need a more flexible energy system that allows us to shift renewable energy to the periods of the day when the demand for power is at its greatest. 'And as the UK builds more and more renewable projects, increasingly there are times when the amount of renewable electricity on the system is greater than the demand for it.' The three applications will be considered by county planners at a later date.
Yahoo
6 days ago
- Yahoo
Group of Aussies headed for work crisis
Australia's white collar workers will soon be under threat as experts warn the job slow down is 'more complicated' this time around. In its latest release of jobs data, the ABS revealed Australia's unemployment rate soared to 4.3 per cent, its highest level since the post pandemic recovery. The falls were broad-based with NSW, Queensland, Western Australia and the Northern Territory all seeing strong spikes in unemployment. Drilling down into the figures, so far it has impacted blue collar workers disproportionately, but it is expected major technological advancements will flip the script in the next year. ABS data released in June shows workers living in Sydney's west, including the Parramatta district have an unemployment rate of 5.7 per cent, compared to Sutherland in Sydney's south, which recorded just a 2.3 per cent unemployment rate. Meanwhile, those in Melbourne Inner East and South have seen a 0.2 per cent spike in unemployment while those in Geelong have actually seen the market strengthen. AMP chief economist Shane Oliver said this could change as unemployment becomes 'more complicated this time' as the number of new public sector roles drops and AI use becomes more commonplace within corporations. 'Normally it's the more cyclical parts that are vulnerable including manufacturing, construction, and retail,' he told NewsWire. 'This time could be a little different.' 'You've also got the overlay of AI coming in which suggests there could be more of an impact on white collar jobs, as companies seek to lower their costs through the emergence of the new technology.' Seek's monthly jobs data also points to less need for white collar workers. The construction sector was the only area that recorded a lift in job ads in June as a whole, while there were some pockets in growth for those in professional services including markets and communications and accounting. Meanwhile available information and communications technology positions continued to decline, with job ads falling 3.5 per cent in June or 10.5 per cent for the year. Advertised positions in the sector have now fallen below covid levels. Seek senior economist Blair Chapman said there had been a 5.5 per cent fall in job ads, and an increase in the number of Australians looking for work. 'On the other side of the market, applications per job ad have never been higher, and have now surpassed the peak recorded in 2020 when job ads were at their lowest,' he said. 'This rise is due to an increased candidate pool, rather than candidates applying for more roles. 'Over the past couple of years more Australians have taken on a second job, or are looking to do so, and more workers have entered or re-entered the workforce. 'This is likely in response to increased living costs, and as a result, competition is extremely strong for most available roles.'
Yahoo
26-07-2025
- Yahoo
What plastic, paper and metal commodity experts are watching with tariffs
This story was originally published on Waste Dive. To receive daily news and insights, subscribe to our free daily Waste Dive newsletter. Editor's note: This story is part of a series highlighting takeaways from a July 23 virtual event hosted by Packaging Dive, Supply Chain Dive, Manufacturing Dive and Trucking Dive. Register here to watch the replay on demand. It's normal for commodity markets to ebb and flow due to a variety of domestic and global factors, but recent tariff impacts and changes in the U.S. economy in 2025 have thrown a new wrench in markets for virgin and recycled aluminum, plastic and fiber commodities. Experts in plastics, paper and metals offered an overview of these factors during the 'Supply Chain Outlook: Trends and Risks to Watch in 2025' event on Wednesday. The Trump administration's tariffs have resulted in market uncertainty, and that's playing out in different ways depending on the commodity, speakers said. These were some key takeaways from the event: Varied trade exposure, but also opportunities for US plastic manufacturing In the plastics industry, tariff exposure varies by sector. For example, plastic resins face less uncertainty compared with the machinery and molds sectors, said Perc Pineda, chief economist at the Plastics Industry Association. 'By and large, the plastics industry's exposure to trade is only about 20%,' he said, noting that there's currently 'a lot' of U.S. plastics production capacity and low utilization. 'If there is a need for import substitution because tariff rates are so high it's cost prohibitive, I am confident that domestic manufacturing could actually step in,' he said. The United States is a net importer of recycled plastics materials, he said. At the same time, domestic virgin resin production has increased by 5% year over year, which he sees as a sign that such production could help backfill demand if recycled commodities become harder to source due to tariffs. In June, virgin resin prices rose by 0.3%, which he sees as a sign that higher tariffs haven't automatically translated to higher inflation. However, the U.S. imports about 70% of the machinery it needs for plastic production, plus around half of needed molds, leading the industry to call for certain tariff exemptions in these sectors, he said. The industry is monitoring the situation, but likely won't see the true effects of such tariffs for several months. 'I know things are evolving, but I am hopeful, because I don't think the economy can continue with a scenario like this, when there's so much uncertainty. It has long-term effects, and the knock-on effects on the economy are going to be broad and wide.' Section 232 tariffs continue to impact steel and aluminum can manufacturing Section 232 aluminum and steel tariffs, which have been in place since 2018, went from 25% to 50% earlier this year. That has increased costs for aluminum and steel cans used for food, beverages and other items. The Can Manufacturers Institute and other groups are calling for specific tariff exemptions on aluminum imported from Canada, as well as on tin plate typically used to make steel cans, said CMI President Scott Breen. The industry prides itself on its recycled content use, Breen said. The average aluminum beverage can is made of about 71% recycled content, 'but that does mean that 29% is virgin or new aluminum, and most of that virgin aluminum is imported,' mainly from Canada, he said. For steel cans, nearly 80% of tin plate is imported, and 'we would love to purchase more domestic tin plate, but it's just not produced at the levels we need,' he said. Since 2018, nine of the 12 tin plate lines available in the U.S. have shut down, he said. Breen said continued tariffs will likely lead to increased food prices, citing a study from the Consumer Brands Association estimating a 9% to to 15% increase in the cost of canned goods. Broader economic trends, not tariffs, driving US fiber trade for now Meanwhile, broader changes in the global economy are making more of an impact on the fiber industry than tariffs specifically are, said Terry Webber, vice president of industry affairs for the American Forest & Paper Association. Paper is 'a commodity that tracks pretty closely to general economic performances. There's more economic activity, there's more paper and paper-based packaging consumed,' he said. The U.S. exports about 6 million tons of packaging papers globally. However, about 70% of the nation's external fiber trade is with Canada and Mexico, 'so as long as that trading relationship continues, that's going to cover the lion's share of the business we do,' he said. U.S. exports of recovered fiber to global markets have been declining in recent years, and the U.S. has focused on domestic investments meant to expand manufacturing that uses recycled fiber, namely OCC and mixed paper, he said. He estimated that AF&PA companies have announced about $7 billion in recent investments, 'so we're seeing a long-term positive trend in U.S. mill consumption that's helping to offset some of those changes that we're seeing in global trade flows.' At the same time, the U.S. has seen multiple notable mill closures in the first half of 2025. Webber attributed that activity to the industry adjusting its output to market demands. 'As capacity is coming offline, we're making investments in new capacity' while making the overall supply chains more efficient, he said. Webber noted AF&PA is tracking possible tariff impacts on equipment, which is typically imported from regions like Europe. 'It would be unfortunate if the spending and investment that our companies are conducting becomes subject to tariffs," he said. Recommended Reading ISRI says its rebrand to ReMA reflects the recycling industry's modern values Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
