Exclusive: Check out the early-stage CGI used in Captain America: Brave New World
The visual effects company Digital Domain has shared an exclusive clip with Digital Trends showcasing the work that went into making one of the most pivotal scenes in Captain America: Brave New World. At over eight minutes long, the scene shows Captain America (Anthony Mackie) and the Falcon (Danny Ramirez) intercepting a dogfight over the Pacific Ocean between US and Japanese forces that could lead to a full-blown war.
But what really makes the scene unique is that it's almost entirely CGI. 'There was a lot of footage where they captured Anthony Mackie on all these wires. But by the time it was over, it was all CG,' previsualization supervisor Cameron Ward told Digital Trends.
In the previsualization (previs) clip, we get a good glimpse at the early-stage CGI they used to build the scene completely from scratch, including the massive open-ocean setting. Ward said the biggest challenge in the scene wasn't creating such a large space. It was the speed at which all the characters and objects were traveling.
'The biggest challenge with this scene was the speed at which everything was moving,' Ward said. 'We had 600-mile-per-hour missiles flying through the air above an open ocean that we had to build from scratch. You have to set up your camera in a way that feels like Cap just flew by at 600 miles an hour chasing after them. So we had to ask ourselves, how do we visualize that?'
Creating the characters wasn't the only challenge
Creating the clouds was also a surprisingly hefty task for the team. Digital Domain created its own proprietary cloud shader tool to help produce the right sizes, shading, textures, shadows, and various levels of opacity that we see in real clouds. The team even layered four to six cloud renderings on top of each other to give each cloud a varying level of brightness and depth, as we see in real clouds.
Light and shadow were another huge focus for Digital Domain. Taking place over a reflective surface like water meant the team needed to accurately recreate the way sunlight reflects on the ocean. They also needed to create shadows to help give the scene a photorealistic look, so the team made sure to pay attention to every frame that involved a jet or character soaring through the air so they could create a shadow that would be cast on the ocean below.
Before Captain America, Ward had worked on tons of huge projects, like The Last of Us, Black Panther: Wakanda Forever, and Thunderbolts*. But he says Brave New World was his biggest venture yet and said that Digital Domain worked on the movie for an entire year. 'I've been with DD for five years,' he said, 'and this is the biggest, longest sequence I've ever worked on. It actually became much more CG than intended as the project went on, after they realized some of the plates didn't work because of things like reflections in the shot.'
Now you can watch Captain America: Brave New World at home. The Marvel film arrives on DVD and Blu-ray on May 13. Disney+ subscribers can stream the film on the service starting May 28.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Hypebeast
an hour ago
- Hypebeast
A.P.C. Celebrates Japanese Food With "Gourmet Japonais" Apparel Collection
Summary a Japan-exclusive collection inspired by Japanese food culture. The capsule features a series of standard fit T-shirts, caps and a tote bag — all of which feature iconic Japanese food. The trio of white T-shirts are designed with graphics of onigiri, edamame and what looks to be rice dumplings, assisted by the A.P.C. Japon logo right below. Meanwhile, the navy blue newsboy cap follows the same onigiri graphic in white. Closing it out are a duo of navy blue and green tote bags featuring either the rice dumplings or the edamame design. Check out the collection above. The A.P.C. 'Gourmet Japonais' collection is available now on theofficial webstoreand A.P.C. stores.
Yahoo
5 hours ago
- Yahoo
Resilience, a Private Japanese Spacecraft, Crash-Landed on the Moon
A Japanese spacecraft has probably crashed on the Moon, the second failed landing attempt for Tokyo-based private firm ispace. The HAKUTO-R Mission 2 (M2) lander — also called Resilience — began its landing sequence from a 100-kilometre-altitude orbit at 3.13am local time on 5 June. The craft was due to land near the centre of Mare Frigoris (Sea of Cold) at 4.17am. The ispace team said at a press conference that it lost contact with M2 when the craft was 192 metres above the Moon's surface and descending faster than expected. An attempt to reboot M2 was also unsuccessful. [Sign up for Today in Science, a free daily newsletter] M2 didn't receive measurements of the distance between itself and the lunar surface in time to slow down and reach its correct landing speed, the team said. 'It eventually slowed down, but not softly enough,' says Clive Neal, who studies the Moon at the University of Notre Dame in Indianapolis, US. He speculates that the failure was probably caused by a systems issue that wasn't identified and addressed during the M1 landing attempt. 'It's something that I believe will definitely be fixable, because getting that close means there's a few tweaks that are going to be needed for the next one,' he adds. If M2 had successfully landed on the lunar surface, the mission would have been the second time a commercial company had achieved the feat and a first for a non-US company. ispace's Mission 1 (M1) probably crashed during a landing attempt in April 2023. Lunar landings are challenging. When M1 crashed, Ryo Ujiie, ispace's chief technology officer said the telemetry — which collects data on the craft's altitude and speed — estimated that M1 was on the surface when it wasn't, causing the lander to free fall. Speaking to Nature last week, Ujiie said the company had addressed the telemetry issue with M2 and modified its software. 'We also carefully selected how to approach the landing site,' he added. Had M2 landed successfully, the craft would have supplied electricity for its cargo, including water electrolyzing equipment and a module for food production experiments — developed by Japan-based Takasago Thermal Engineering and biotechnology firm Euglena. A deep space radiation probe made by Taiwan's National Central University, and the 54-centimetre Tenacious rover were also be on board. The rover, created by ispace's European subsidiary in Luxemburg, was going to be released from the lander to collect imagery, location data and lunar sand known as regolith. Tenacious also carries a small red house made by Swedish artist Mikael Genberg. The craft launched on 15 January from Cape Canaveral, Florida, onboard a SpaceX Falcon 9 rocket. The rocket was also carrying the Blue Ghost Moon lander — developed by Firefly Aerospace, an aerospace firm based in Texas — which landed on the Moon on 2 March. M2 took a longer path to the moon than Blue Ghost, performing a lunar flyby on 15 February and spending two months in a low-energy transfer orbit before entering lunar orbit on 7 May. Ujiie says the path was slower because it was a low-energy trajectory, meaning that less fuel was used to move between Earth and lunar orbit. Richard de Grijs, an astronomer at Macquarie University in Sydney, Australia, says there will likely be more private companies trying to land their own crafts on the Moon. 'It seems that the big government players like NASA are quite keen to partner with commercial companies,' he says, because they can develop and launch crafts more cheaply than government bodies. He also expects that more missions will be launched in clusters, like the launch of M2 and Blue Ghost. This article is reproduced with permission and was first published on June 6, 2025.
Yahoo
5 hours ago
- Yahoo
Yageo to meet with Japan's Shibaura Electronics in mid-June
KAOHSIUNG, Taiwan (Reuters) -Taiwan's Yageo will meet with Japan's Shibaura Electronics in the middle of this month in Tokyo to discuss cooperation, Yageo's chairman said on Saturday. Pierre Chen was speaking to reporters at an event in Kaohsiung, Taiwan. Yageo, the world's largest maker of chip resistors, announced an unsolicited tender offer for Shibaura Electronics in February, aiming to acquire full control of the Japanese manufacturer that specialises in thermistor technology. Error while retrieving data Sign in to access your portfolio Error while retrieving data Error while retrieving data Error while retrieving data Error while retrieving data
