Aussies splash cash on clothes and cars in May spending surge as rate cut chances firm up
Fresh figures from the ABS show household spending indicators gained 0.9 per cent month on month beating market predictions of a 0.5 per cent increase.
The rise in household spending came just two days after soft retail data came in at 0.2 per cent, against forecasts of a 0.5 per cent lift.
Commonwealth Bank senior economist Belinda Allen explained to NewsWire the difference in figures comes from how the data is collated.
'There's a few differences between the two releases, with retail trade being survey-based and only capturing around a third of consumer spending,' Ms Allen said.
'Monthly household spending intentions data, which came out today, uses bank transactional data and other sources so it includes a bit over 60 per cent of consumer spending.
'Depending on what cateorgy does well can mean the difference between the releases.'
According to Friday's monthly household spending data seven of the nine spending categories rose in May, led by Clothing and footwear, which was up 3.7 per cent, Transport gained 1.7 per cent, and Miscellaneous goods and services rose 1.3 per cent.
Alcoholic beverages and tobacco slipped 1.4 per cent and Food dropped 0.1 per cent to be the only two negative quarters.
This follows a flat result in April and a 0.1 per cent fall in March.
Robert Ewing, ABS head of business statistics, said the rise in May was driven by spending on discretionary goods and services.
'Discretionary spending rose 1.1 per cent, as households spent more on clothing and footwear, new vehicles, and dining out,' he said.
'Meanwhile, non-discretionary spending was up 0.5 per cent, rising for a fifth consecutive month.'
Household spending is now 4.2 per cent higher than this time last year, led by health spending which jumped 8.4 per cent and miscellaneous goods and services which is up 8.3 per cent.
Services spending was 7.5 per cent higher than May 2024, while goods spending was up 1.5 per cent.
The boost in household spending indicators comes just days after the ABS also released its retail sales data which underwhelmed market expectations.
Retail sales were up 0.2 per cent in May following a disappointing April which saw sales fall by 0.1 per cent even though Australians were treated to two public holidays in the month.
Ms Allen said regardless of the figure used, it is too low to impact the RBA rate decision next week.
'When you look at the collective data since the May release … there has been enough to show that lower interest rates are both necessary and manageable for the Australian economy both from an activity and inflation perspective' she said.
'We have to remember interest rates are still in restrictive territory, they will still be in the restrictive territory with this next rate cut and the economic recovery is still pretty lacklustre.'
Ms Allen said even though consumer spending picked up on today's household spending data it is too early to tell if Australia's economy is starting to track better.
'There are some green shoots in the data,' she said.
'Discretionary spend is a little stronger, including eating and drinking out so there are some areas where you can see an improvement in consumer spending.
'But if you look at how much it has lifted throughout the year, it is still pretty soft.'
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Sydney Morning Herald
12 minutes ago
- Sydney Morning Herald
How Laura's stylish house was built twice as fast as normal
Traditionally-built houses take more than a year from approval to completion, according to ABS and AMP data. Prefab and modular experts say they can get more homes built affordably, up to 50 per cent faster, and with fewer disruptions. Prefabricated components are made in a factory and assembled on site; modular sections are factory-produced and combined on site. Prefab modular is a hybrid. Governments need to commit up to 70 per cent of social housing projects to prefab or modular, to achieve the kind of scale that will reduce costs, says Dr Ehsan Noroozinejad, a senior researcher and global challenge lead at Western Sydney University. 'We need some sort of support from the government,' he says. 'We cannot push the private sector and the community alone to use this technology.' The Australian Building Codes Board (ABCB), a joint body of the federal and state and territory governments, released a handbook last year on how to use modern methods in line with the National Construction Code, and is developing a voluntary certification scheme for manufacturers. However, prefab and modular is still unfamiliar to some councils and building certifiers, who are the guardians of permits and approvals, experts say. A lack of understanding is delaying what should be a speedy option. Noroozinejad says there is not enough training in how to approve the final product, and the voluntary scheme will be more effective if it were compulsory. 'The certifiers and the councils are not familiar with this technology, or they believe that it is not suitable for their area because of cultural heritage value,' he says. 'If the process is streamlined, this type of technology should be very efficient. Otherwise, it's not working.' Jennings' home is the work of Prebuilt, a prefabricated modular manufacturer with a base in Kilsyth and another near Newcastle in NSW. Prebuilt chief executive Malcolm Batten says incorrect perceptions of modular have held it back from wider adoption. 'When the average person thinks modular, they think of flimsy, temporary and cheap, and the permanent buildings we do are not flimsy,' he says. 'They're very strong and will last as long, or longer, than a conventional build.' Prebuilt has constructed hotels, family homes, granny flats, farmhouses and beach retreats, from Sydney's high-end Mosman to the hamlet of Lorne, on Victoria's Great Ocean Road. However, some councils are so uncertain about what modular means, they scotch planning applications that come across their desk. Loading 'In one of them in NSW, we can't put a modular building there because their statutes talk about modular like it's a caravan, and so you're not allowed to because it comes in on the back of the truck,' Batten says. Another hindrance has been access to finance, leaving home owners to meet 90 per cent of upfront costs or enter into arrangements with their builder, as Jennings did. Many banks have been unwilling to make progress payments to builders when the asset – the block of land – is not gaining value while construction occurs elsewhere. However, their stance is softening. The Commonwealth Bank has changed its lending criteria after collaborating with industry group PrefabAUS, and now provides prefab and modular home loans of up to 60 per cent of the contract price. Damien Crough, co-founder and executive chair of PrefabAUS and managing director of Advanced Offsite Group, says companies were shouldering the financial risk, which limited their growth. 'Planning, regulation and financial models all need to be adjusted to recognise off-site construction,' he says, 'and so that's what we've been working on.' PrefabAUS members have drafted an advice paper for the treasurer on barriers to financing and Crough is assisting the ABCB in streamlining industry definitions. Tahi Merrilees and his Wild Modular co-founder Alex Tattle launched their company in 2021 after years on old-fashioned building sites. 'We got sick of trudging around in mud and being delayed, and it got to a point where we just started looking at better ways to build,' Merrilees says. The Sydney-based company has just delivered three social houses in Wollongong for the NSW government under a pilot program. All were handed over within six months, but the build time was only three-and-a-half weeks. To help facilitate loans, Merrilees and Tattle have set up live-feed cameras in their Wetherill Park factory to track progress of projects. The transparency has compelled more lenders to fund their projects, from Tasmania to WA and the Whitsundays. 'There's change happening to make it smoother,' Merrilees says. 'That's going to have a massive impact on housing supply as the industry grows.' Noroozinejad says only 4 per cent to 5 per cent of Australian housing is prefab, compared to European countries such as Sweden, where it is 84 per cent. To increase output, he proposes empty car manufacturing plants be repurposed as prefab housing factories. 'We have the capacity and very positive feedback from the industry,' he says. Jennings, an experienced renovator, has been astonished by what modular can achieve. 'I love the level of finish,' she says. 'After doing renovations that have gone way too long, the build time was extraordinary.'
The Age
12 minutes ago
- The Age
How Laura's stylish house was built twice as fast as normal
Traditionally-built houses take more than a year from approval to completion, according to ABS and AMP data. Prefab and modular experts say they can get more homes built affordably, up to 50 per cent faster, and with fewer disruptions. Prefabricated components are made in a factory and assembled on site; modular sections are factory-produced and combined on site. Prefab modular is a hybrid. Governments need to commit up to 70 per cent of social housing projects to prefab or modular, to achieve the kind of scale that will reduce costs, says Dr Ehsan Noroozinejad, a senior researcher and global challenge lead at Western Sydney University. 'We need some sort of support from the government,' he says. 'We cannot push the private sector and the community alone to use this technology.' The Australian Building Codes Board (ABCB), a joint body of the federal and state and territory governments, released a handbook last year on how to use modern methods in line with the National Construction Code, and is developing a voluntary certification scheme for manufacturers. However, prefab and modular is still unfamiliar to some councils and building certifiers, who are the guardians of permits and approvals, experts say. A lack of understanding is delaying what should be a speedy option. Noroozinejad says there is not enough training in how to approve the final product, and the voluntary scheme will be more effective if it were compulsory. 'The certifiers and the councils are not familiar with this technology, or they believe that it is not suitable for their area because of cultural heritage value,' he says. 'If the process is streamlined, this type of technology should be very efficient. Otherwise, it's not working.' Jennings' home is the work of Prebuilt, a prefabricated modular manufacturer with a base in Kilsyth and another near Newcastle in NSW. Prebuilt chief executive Malcolm Batten says incorrect perceptions of modular have held it back from wider adoption. 'When the average person thinks modular, they think of flimsy, temporary and cheap, and the permanent buildings we do are not flimsy,' he says. 'They're very strong and will last as long, or longer, than a conventional build.' Prebuilt has constructed hotels, family homes, granny flats, farmhouses and beach retreats, from Sydney's high-end Mosman to the hamlet of Lorne, on Victoria's Great Ocean Road. However, some councils are so uncertain about what modular means, they scotch planning applications that come across their desk. Loading 'In one of them in NSW, we can't put a modular building there because their statutes talk about modular like it's a caravan, and so you're not allowed to because it comes in on the back of the truck,' Batten says. Another hindrance has been access to finance, leaving home owners to meet 90 per cent of upfront costs or enter into arrangements with their builder, as Jennings did. Many banks have been unwilling to make progress payments to builders when the asset – the block of land – is not gaining value while construction occurs elsewhere. However, their stance is softening. The Commonwealth Bank has changed its lending criteria after collaborating with industry group PrefabAUS, and now provides prefab and modular home loans of up to 60 per cent of the contract price. Damien Crough, co-founder and executive chair of PrefabAUS and managing director of Advanced Offsite Group, says companies were shouldering the financial risk, which limited their growth. 'Planning, regulation and financial models all need to be adjusted to recognise off-site construction,' he says, 'and so that's what we've been working on.' PrefabAUS members have drafted an advice paper for the treasurer on barriers to financing and Crough is assisting the ABCB in streamlining industry definitions. Tahi Merrilees and his Wild Modular co-founder Alex Tattle launched their company in 2021 after years on old-fashioned building sites. 'We got sick of trudging around in mud and being delayed, and it got to a point where we just started looking at better ways to build,' Merrilees says. The Sydney-based company has just delivered three social houses in Wollongong for the NSW government under a pilot program. All were handed over within six months, but the build time was only three-and-a-half weeks. To help facilitate loans, Merrilees and Tattle have set up live-feed cameras in their Wetherill Park factory to track progress of projects. The transparency has compelled more lenders to fund their projects, from Tasmania to WA and the Whitsundays. 'There's change happening to make it smoother,' Merrilees says. 'That's going to have a massive impact on housing supply as the industry grows.' Noroozinejad says only 4 per cent to 5 per cent of Australian housing is prefab, compared to European countries such as Sweden, where it is 84 per cent. To increase output, he proposes empty car manufacturing plants be repurposed as prefab housing factories. 'We have the capacity and very positive feedback from the industry,' he says. Jennings, an experienced renovator, has been astonished by what modular can achieve. 'I love the level of finish,' she says. 'After doing renovations that have gone way too long, the build time was extraordinary.'
The Australian
3 hours ago
- The Australian
The ASX's best undeveloped mines, according to Argonaut
Argonaut's latest Best Undeveloped Projects list was launched this month Companies listed in the guide have historically done well, with cumulative gains for key picks of 212% over more than a decade Gold, uranium, copper and critical minerals deposits all among the 25-strong list of key picks and special mentions In a world of AI, quants and passive investing, there are smoke signals to be found that active management and stock picking still matters when it comes to choosing outperformers. Look no further than the Best Undeveloped Projects list out of Perth brokers Argonaut, the tome from the Wild West that puts guard rails around which future mines have the best prospects for success. This year's list is now out, presenting 25 projects yet to enter construction that have the potential to become significant mining operations. Of those, 18 make the main list with another seven in the special mentions category. It's impossible to predict the future with perfect accuracy, but recent history suggests the list can be a good guide for value creation. Argonaut has drawn up the list each year since 2014. In that time there have been four down years and seven up years for its key picks, with average growth of 14%. A cumulative investment would have netted 212% for key picks and 94% for special mentions over that period, against just 61% of the ASX 200 and 123% for the small resources index. Last year was a strong one for Argonaut's key picks, notching their third best performance in the past decade with average share prices 38% higher. Special mentions underperformed small resources (10% vs 12%), though that came off a massive 58% run in 2023. The standout performer in 2024's list was New World Resources (ASX:NWC), up 235% after a bidding war resulted in its $243 million cash takeover by Kinterra Capital – the prize its high-grade Antler copper project in Arizona. It would be hard to repeat a success like that, with De Grey Mining also a major mover after its scrip takeover by Northern Star Resources (ASX:NST) to end the speculation over who would eventually get to develop the 11.2Moz Hemi gold project. With that in mind, we felt it was worth a squiz at this year's book to see which projects Argonaut thinks are the real deal this year. The list Before we go onto the list itself, it's worth noting what criteria Argonaut's stock pickers use to determine their top selections, giving a sense of what professional analysts look for when they talk about a standout asset. Geared towards low cost, high margin opportunities, the projects assessed by Argonaut must be development stage, somewhere between a scoping study and pre-commercial production, have an internal rate of return upwards of 25% (large miners typically will develop anything above 15% depending on mine life), profitable through all market conditions and commodity price cycles and highly likely to achieve a project valuation north of $100m within 24 months. To make the list the project owner must also have a valuation of less than $5bn – no boring, index tracking mega caps here. This year's book is a long one. So we'll roll up the key picks here: Argonaut's key picks for best undeveloped projects. Pic: Argonaut Running through the 18 key picks, and you'll be surprised to see gold doesn't totally dominate the ledger – these projects are supposed to work in all commodity cycles after all. Copper gets two nods, courtesy of AIC Mines' (ASX:A1M) Jericho and FireFly Metals' (ASX:FFM) Green Bay. Unloved nickel and resurgent platinum group metals get some love in Centaurus Metals' (ASX:CTM) Jaguar project in Brazil and Chalice Mining's (ASX:CHN) Gonneville in WA. Zinc, rare earths, niobium and rutile all get one mention, with lithium and uranium bagging two a piece. It's not everything, but in a sign of the times, gold assets still make up the largest single portion of the list, with six of the 18 names aiming to develop gold assets. Those include large producers Greatland Resources (ASX:GGP), Perseus Mining (ASX:PRU) and Capricorn Metals (ASX:CMM), who are all looking to build new mines in the coming years at Havieron, near Greatland's Telfer mine, Nyanzaga in Tanzania and Mt Gibson in WA, respectively. But there are small caps on the card also: Magnetic Resources' (ASX:MAU) Lady Julie deposit in WA's Laverton gold district, Predictive Discovery's (ASX:PDI) Bankan in Guinea and WIA Gold's (ASX:WIA) Kokoseb in Cote d'Ivoire are all included, with each shaping as potential M&A targets. "An improved gold market has fuelled increased exploration across the space, resulting in the emergence of new greenfield and near-mine discoveries," Argonaut said. "We include nine gold projects, with five located in Western Australia and the remainder across the Africa region. "We remain firmly committed to our belief that decarbonisation will play an increasingly important role in the global economy. Future facing metals such as lithium, rare earth elements, copper, niobium and uranium are all represented in our project selections." Special mentions include projects that could progress to Argonaut's main list. Pic: Argonaut Three gold stocks feature on the special mentions, including Brightstar Resources (ASX:BTR) and its soon to be wholly consolidated Sandstone project, where the acquisition of neighbour Aurumin (ASX:AUN) would pump up its inventory from 1.5Moz to 2.4Moz gold. Tim Goyder's Minerals 260 (ASX:MI6) and its ripe to be mined Bullabulling mine near Coolgardie also makes the grade along with Diggers and Dealers best emerging company award winner Turaco Gold (ASX:TCG) and its Afema deposit in Cote d'Ivoire. Rare earths and niobium plays Northern Minerals (ASX:NTU) and Encounter Resources (ASX:ENR) are on the bill, with African uranium opportunities Aura Energy (ASX:AEE) and Bannerman Energy (ASX:BMN) cracking a mention. Projects to watch There's a lot to pore over, but we've decided to take a look through some of the key picks and special mentions for a few that piqued our interest. Aura Energy - Tiris Aura Energy's Tiris is among the most advanced uranium assets on the ASX, with first production expected in 2027. The project lies in the West African country of Mauritania, an off the radar locale for ASX investors which nonetheless is home to major mining operations, especially in gold and iron ore. Tiris would be its first uranium mine, with Argonaut's John Scholtz suggesting its 162Mt at 215ppm resource (76.6Mlb) could underpin production of 1.7Mlbpa at all in sustaining costs of US$37.07/lb. "A DFS on the project was completed in 2021 and has subsequently been updated in 2023 and had a FEED study in 2024 highlighting robust economics. AEE is now focused on funding and is expected to do an FID in the near-term. The project is fully licensed," Scholtz said. "Due to current market conditions delaying an FID, AEE's current target for delivering production is early CY27 rather than their initial estimates in the FEED. Using a 50/50 blend of spot prices and Argonaut forecasts the NPV of Tiris is A$585m." That compares very favourably to Aura's current market cap of $138m. Magnetic Resources - Lady Julie Magnetic's Lady Julie North 4 discovery has grown from 200,000oz to 1.94Moz in just two years, with Argonaut's Patrick Streater predicting another update could take the resource there to 2.25Moz. That would add further value to an asset where a feasibility study in July outlined a nine-year mine life producing 114,000ozpa, including 140,000ozpa between years three to eight. Argonaut has modelled a 10.5 year mine life at 110,000ozpa, with pre-production capex of $375m including working capital, with an initial open pit to be supplemented by an underground from the third year of ops. "MAU presents both as an attractive standalone development project, whilst also being a compelling M&A target for existing producers in the region looking for a large high-grade ore feed," Streater said. The attraction for nearby majors is its locale. Magnetic sits within 15km of both Genesis Minerals' (ASX:GMD) Mt Morgans mill and Gold Fields' Granny Smith, both of which have long been regarded as underfed. When deposits outside Lady Julie are included, the broader Laverton project's resource runs up to 2.32Moz, making it one of the largest undeveloped gold bases in the hot WA Goldfields region. "MAU continues to progress the Lady Julie project down a standalone development route with a sufficient mining inventory now built to cover pre-production capital costs," Streater said. "However, the existing processing infrastructure in the region across various producers makes MAU a compelling M&A target, which could instead be acquired as a bolt-on project for a nearby producer. The LJN4 open pit includes a large high-grade ore reserve of 14.3Mt at 1.6g/t for 726koz, which would be an attractive high-grade feed with scale to supplement existing mill ore feeds or displace lower-grade material." Patriot Battery Metals - Shaakichiuwaanaan Is lithium still sufficiently exciting at spodumene prices of under US$1000/t to warrant best project inclusion? Argonaut still sees Ken Brinsden's Patriot as "globally significant" as the largest hard rock lithium deposit in North America, running at 141Mt at 1.39% Li2O. It bolstered the investment case last month by reporting the world's largest pollucite hosted caesium deposit also existed on the site, including a high-grade component of 163,000t at 10.25% Cs2O with lithium and tantalum credits. An exploration target of 146-231Mt at 1-1.5% Li2O means converting drill metres to resources could put the project in league with Pilbara Minerals' Pilgangoora, MinRes and Albemarle's Wodgina and the Greenbushes JV in WA for scale. A feasibility study is due at the end of September. Predictive Discovery - Bankan A DFS recently outlined a 12-year operation producing 250,000ozpa at an all in sustaining cost of just US$1057/oz. Hosting a 2.95Moz reserve, Bankan is one of the largest discoveries made in West Africa in recent years, with the grant of an exploration permit viewed by Argonaut's Patrick Streater as a key catalyst for the project, expected to cost US$463m to bring into production by 2028. While wrangling from Guinea's Government over licences at other projects is potentially throwing some storm clouds over the junta-run jurisdiction, the award of the exploration permit could be a trigger for M&A. That seems the logical outcome for PDI, which has Perseus, Lundin and Zijin all on its register as significant shareholders. "We expect the Lundin Group/Zijin to be the most likely owners. Under PDI's current development timeline, assuming PDI brings Bankan into production, the first gold is targeted for early CY28," Streater said. Brightstar Resources - Sandstone Brightstar is already a small scale gold producer, using toll treatment to deliver between 35-40,000ozpa from a string of gold mines across the Menzies and Laverton gold districts. An expansion there, using its own plant infrastructure, could enhance that to 70,000ozpa later this decade. But Alex Rovira's firm's big opportunity to grow into a 200,000ozpa miner lies in the forgotten Sandstone gold field. Over the past two years, the firm has delivered on a plan to consolidate the district – the fourth pillar of the Murchison province alongside the Ramelius Resources dominated Mt Magnet and Westgold controlled Cue and Meekatharra – via aggressive M&A. The latest gambit is its agreed merger with Aurumin, which will take the total inventory to 2.4Moz. FID is due in 2027 with production to start late in 2028 on present ambitions. 100,000m of drilling is planned this financial year. Argonaut's Hayden Bairstow has a spec buy rating and $1.60 valuation on 40c BTR. The broker's 3Mtpa production scenario for Sandstone carries a $200m capex estimate, with average gold production of 105,000ozpa with costs of $3000/oz for the first five years. A PFS and ore reserve are due in 2026. Sovereign Metals - Kasiya Kasiya hosts the world's largest natural rutile resource of 1.8Bt at 1%, with 1.4% natural graphite a co-product kicker. Natural rutile is the world's cleanest and most desirable source of titanium dioxide feedstock, with supplies expecting to head into decline over the course of this decade. Rio Tinto has already read the tea leaves, picking up a 19.9% equity stake in the company, which is expected to deliver a DFS on the Malawi-based project in Q4 2025. "Rio Tinto (Not Covered/No Rating) holds a 19.9% equity stake in SVM and we anticipate they will ultimately pay a market premium to takeover SVM. The DFS expected in 4QFY25 remains as a key catalyst," Argonaut's George Ross said. Argonaut has a $1.691bn NPV attached to the project, slightly below Sovereign's optimised PFS estimate. The number is pre-tax, with the application of a 15% Malawian resource rent tax still uncertain. The project has already attracted the interest of international offtakers, Ross noted. "The project will produce two critical mineral co-products, rutile and graphite, at a low carbon cost. Kasiya's rutile concentrate is considered a premium product with good particle size and low deleterious elements," he said. "Because of its quality, Kasiya's rutile is suitable for use as both a titania feedstock and in the high value welding sector. SVM has entered into non-binding MOUs with three major rutile market participants: Mitsui, Chemours and Hascor." At Stockhead, we tell it like it is. While Sovereign Metals, Brightstar Resources, Aura Energy and Magnetic Resources are Stockhead advertisers, they did not sponsor this article. The broker's opinions are not those of Stockhead.
