Railgun Installed On Japanese Warship Seen In New Photos
The images of Asuka and its railgun in port in Yokosuka, seen at the top of this story and below, come from @HNlEHupY4Nr6hRM on X who originally posted online. All of the images were taken on June 30. Additional photos of the ship taken recently are also circulating online. Asuka, a 6,200-ton-displacement dedicated testbed with a warship-like design, first emerged with the turreted railgun on its stern flight deck in April.
The pictures show the shroud around the railgun removed so that work can be performed on the weapon inside. This confirms that the railgun installed in the turret on Asuka is extremely similar, if not identical, to a prototype that the Japanese Ministry of Defense's Acquisition, Technology & Logistics Agency (ATLA) has been testing on land and sea for a number of years now. TWZ had posited that this was likely the case based on what was visible in previous available imagery. How exactly the design may have evolved over the years is unclear.
Also visible are what look to be several containerized generators and/or capacitors, as well as other shipping containers that could contain additional systems or workspaces. Railguns, which use electromagnets instead of chemical propellants to fire projectiles at very high velocities, have historically had significant power generation and cooling requirements. These demands mean that complete railgun weapon systems are typically physically very bulky.
06/30/2025 試験艦 あすか 搭載しているレールガン整備中でした。砲身カバーも外して砲身本体も見えました pic.twitter.com/PDLvXXsLgm
— (´・(ェ)・`) (@Gov_Vessel_fan) June 30, 2025
With all this in mind, TWZ previously noted that installing the railgun turret Asuka's flight deck made good sense from a testing perspective, given the ample open space it offered. Integrating the weapon onto an operational warship in a traditional manner would require meeting the power and cooling demands, as well as finding sufficient space below deck for the various components, in addition to the time and resources for those more extensive modifications.
Railguns present additional challenges when it comes to the wear and tear of sustained firing of projectiles at very high speeds. As barrels quickly wear out from extreme friction, the weapon's range and accuracy are degraded, and the potential risk of a catastrophic failure can emerge.
In past testing, ATLA has reportedly demonstrated the ability to fire rounds at a velocity of around 4,988 miles per hour (2,230 meters per second; Mach 6.5) while using five megajoules (MJ), or 5 million joules (J), of charge energy. As of April, prior testing goals had included a muzzle velocity of at least 4,473 miles-per-hour (2,000 meters-per-second) and a barrel life of 120 rounds, according to Naval News. Reports say that ATLA has also been working to reduce the weapon's power requirements.
In May, Aviation Week reported that at least one at-sea test of Asuka's railgun installation was set to occur sometime in June. Yahoo Japan subsequently published a story saying that the testing window would span from June 9 to July 25. That same piece said that the test ship had been observed departing Yokosuka on June 9, but it is unclear whether or not any live-fire testing has yet taken place.
Speaking through an interpreter at a panel discussion at DSEI Japan 2025, Kazumi Ito, principal director of the equipment policy division at ATLA, said Japan's railgun efforts were 'progressing,' but acknowledged 'various challenges,' according to National Defense Magazine.
Despite the challenges, Japanese authorities have made clear they are looking toward an operational naval railgun capability in the future. Starting at the DSEI Japan 2025 exposition earlier this year, the Japanese Ministry of Defense has been publicly showing a model of a railgun in a turret with a much more streamlined design than the one currently on Asuka.
Railgun
GUNDAMのビームライフルみたいなモノらしい!やべー
#防衛省#防衛省・自衛隊#レールガンpic.twitter.com/pfNgtpbTlp
— TAC✩FIGHTER. NJ
7/6札幌SGGM
(@Tacforce_japan) July 1, 2025
In a public presentation in 2024, JMSDF Vice Adm. Imayoshi Shinichi, ATLA's director general of Naval Systems, had also highlighted plans to integrate a railgun on future 13DDX destroyers, which are expected to begin entering service in 2024. ATLA has previously shown an artist's conception of a Maya class destroyer, also known as the 27DDG class, armed with a railgun, as well.
Japan's future Destroyers and Submarines at CNE 2024 https://t.co/aCEMqWX0od @YouTubeより 13DDX!!!!!!!!レーザー!A-SAM!レールガン!あとなにげにFutureAEGISがASEVに近くない!? pic.twitter.com/e1uvqAVoZl
— Yasuおすぎ
@C106 日曜 東キ-05b (@yasu_osugi) May 28, 2024
The video below, which ATLA put out last year, also depicts ground-based railguns mounted on trucks.
As terms of potential operational applications of either naval or ground-based railguns, these weapons hold the promise of being potent anti-air assets, in addition to being able to engage targets at sea and on land. As TWZ has previously written:
'In principle, a practical electromagnetic railgun would offer a highly capable and flexible weapon system that can rapidly engage a wide array of targets at sea, on land, and even in the air, and at considerable ranges. Japan has previously expressed interest in this capability explicitly to help protect against incoming hypersonic threats. Such a weapon would also offer benefits in terms of magazine depth and cost compared to traditional surface-to-air and surface-to-surface missiles, given the small size and lower unit price of the individual rounds.'
'When it comes to warships, in particular, where physical space is at a premium and where options for reloading missiles at sea can be at best extremely limited, having a weapon system firing lower-cost munitions from a large magazine and that can engage a broad swath of target sets would be a clear boon.'
Japan is certainly not alone in trying to turn the capabilities that a railgun could offer into a reality. The U.S. Navy and the U.S. Army have experimented with railgun designs in the past two decades or so. The Navy was particularly active on this front from 2005 to 2022, but ultimately shelved that work in the face of persistent technical issues. Planned at-sea testing was never conducted after being repeatedly set back. Interestingly, ATLA has reportedly met with U.S. Navy representatives about potentially leveraging the service's past railgun work.
'In getting closer to the deployment, I believe the scope of collaboration [with the United States] will be expanded,' ATLA's Ito had also said during the DSEI Japan 2025 panel discussion, per National Defense Magazine.
In the meantime, the U.S. Navy and the U.S. Army have already continued to leverage hypervelocity projectiles previously developed for the railgun for use in conventional naval and ground-based guns. Using the fast-flying projectiles for air defense applications, including knocking down incoming cruise missiles and drones, remains a particular area of interest.
China, a major competitor for Japan on both regional and global levels, has been notably active in developing naval railguns, as well. A turreted railgun first emerged on a People's Liberation Army Navy (PLAN) ship back in 2018. How that development of that design or other Chinese railguns has progressed since then is unclear.
Other countries, most notably Turkey, are also now actively pursuing railguns, including for naval use. In 2024, Japanese authorities themselves signed a deal to cooperate on future railgun developments with their counterparts in France and Germany.
New details about Japan's progress toward fielding an operational naval railgun may begin to emerge soon based on the results of the testing of the prototype installed on Asuka.
Special thanks again to @HNlEHupY4Nr6hRM for sharing the pictures of Asuka with its railgun with us.
Howard Altman contributed to this story.
Contact the author: joe@twz.com

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
11-07-2025
- Yahoo
Growth Ignited by Japan's Digital Transformation and Demand for Cybersecurity Professionals
Japan's Cyber Security Market is set to grow from USD 8.65 Billion in 2024 to USD 18.24 Billion by 2030, with a CAGR of 13.50%. Key drivers include government initiatives, increasing cyber threats, rapid digital transformation, and advances in AI and IoT security solutions. Japanese Cyber Security Market Dublin, July 11, 2025 (GLOBE NEWSWIRE) -- The "Japan Cyber Security Market Size, Share & Trends Analysis Report by Component (Hardware, Software), Security Type, Solution Type, Deployment, Organization Size, End-use, Approach, with Growth Forecasts, 2025-2030" report has been added to Japan Cyber Security Market was valued at USD 8.65 Billion in 2024, and is projected to reach USD 18.24 Billion by 2030, rising at a CAGR of 13.50%. Government initiatives and regulatory frameworks are playing an important role in shaping the market, with policies aimed at enhancing digital infrastructure and cybersecurity capabilities. Cyber threats, such as state-sponsored attacks and ransomware, are becoming more severe, increasing awareness and investment in robust security measures across industries. In addition, Japan's rapid digital transformation has increased the demand for advanced cybersecurity solutions to protect critical sectors such as finance, healthcare, and technological advancements are significantly influencing market growth. Adopting AI-driven security analysis and machine learning algorithms is becoming more prevalent, enabling more effective threat detection and response. Cloud computing and IoT integration drive demand for endpoint protection innovations, critical for securing diverse endpoints against evolving threats. Furthermore, the growth of mobile banking and digital payment platforms in the BFSI sector has expanded the attack surface for cyber threats, necessitating advanced cybersecurity solutions to protect against fraud and data economic and regulatory factors are crucial in driving market growth. The Japanese government's economic stimulus package and increased defense spending underscore cybersecurity as a national priority. For instance, in February 2025, the Japanese Cabinet approved two bills to strengthen the nation's cybersecurity capabilities. These bills empower the Self-Defense Forces (SDF) and the police to enhance Japan's cyber defense mechanisms. This focus on enhancing digital infrastructure and cybersecurity capabilities is essential for safeguarding critical sectors against sophisticated cyber threats. The government's cloud-first policy has further accelerated the demand for network security solutions, as many end users leverage virtual environments. These initiatives, combined with the growing demand for cybersecurity professionals, position the market for significant expansion over the coming years. Key Attributes: Report Attribute Details No. of Pages 182 Forecast Period 2024 - 2030 Estimated Market Value (USD) in 2024 $8.65 Billion Forecasted Market Value (USD) by 2030 $18.24 Billion Compound Annual Growth Rate 13.5% Regions Covered Japan Japan Cyber Security Market Variables, Trends and Scope Market Lineage Outlook Market Dynamics Market Driver Analysis Market Restraint Analysis Industry Challenge Industry Analysis Tools PORTER's Analysis PESTEL Analysis Competitive Landscape Acalvio Technologies, Inc. Akamai Technologies Allure Security Technology Appier Inc. Netpoleon Group BBS Technology (BBSEC) CDNetworks Inc. Cequence Security, Inc. Cisco Systems, Inc. Cyber Security Cloud, Inc. CyberTrap Cybertrust Japan Co., Ltd. Dell Inc. F5 Inc. FFRI Security, Inc. Japan Cyber Security Market SegmentationComponent Outlook (Revenue, USD Million, 2017-2030) Hardware Software Services Security Type Outlook (Revenue, USD Million, 2017-2030) Endpoint security Cloud Security Network Security Application Security Infrastructure Protection Data Security Artificial Intelligence Model/Machine Learning Model Security Hardware Security Others Solution Type Outlook (Revenue, USD Million, 2017-2030) Unified Threat Management (UTM) Intrusion Detection System/Intrusion Prevention System (IDS/IPS) Data Loss Prevention (DLP) Identity and Access Management (IAM) Security Information and Event Management (SIEM) & Security Orchestration, Automation & Response (SOAR) DDoS Risk and Compliance Management Others Deployment Outlook (Revenue, USD Million, 2017-2030) Cloud On-premises Organization Size Outlook (Revenue, USD Million, 2017-2030) Small and Medium Enterprises (SMEs) Large Enterprises End Use Outlook (Revenue, USD Million, 2017-2030) IT and Telecommunications Retail and E-Commerce BFSI Healthcare Government and Defense Manufacturing Energy and Utilities Automotive Marine Transportation and Logistics Others Approach Outlook (Revenue, USD Million, 2017-2030) Traditional Cyber Defense/Reactive Cyber Security Active Cyber Defense/Proactive Cyber Security For more information about this report visit About is the world's leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends. Attachment Japanese Cyber Security Market CONTACT: CONTACT: Laura Wood,Senior Press Manager press@ For E.S.T Office Hours Call 1-917-300-0470 For U.S./ CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call +353-1-416-8900
Yahoo
01-07-2025
- Yahoo
Railgun Installed On Japanese Warship Seen In New Photos
New pictures have emerged showing work being done on the Japan Self-Defense Forces' prototype electromagnetic railgun currently installed on the test warship JS Asuka. An at-sea test of the weapon in this configuration is expected to come before the end of the month, if it has not occurred already. Japan's continued developments in this realm stand in notable contrast to the U.S. Navy's shelving of its promising pursuit of this category of weapons in the early 2020s after major technical hurdles emerged. The images of Asuka and its railgun in port in Yokosuka, seen at the top of this story and below, come from @HNlEHupY4Nr6hRM on X who originally posted online. All of the images were taken on June 30. Additional photos of the ship taken recently are also circulating online. Asuka, a 6,200-ton-displacement dedicated testbed with a warship-like design, first emerged with the turreted railgun on its stern flight deck in April. The pictures show the shroud around the railgun removed so that work can be performed on the weapon inside. This confirms that the railgun installed in the turret on Asuka is extremely similar, if not identical, to a prototype that the Japanese Ministry of Defense's Acquisition, Technology & Logistics Agency (ATLA) has been testing on land and sea for a number of years now. TWZ had posited that this was likely the case based on what was visible in previous available imagery. How exactly the design may have evolved over the years is unclear. Also visible are what look to be several containerized generators and/or capacitors, as well as other shipping containers that could contain additional systems or workspaces. Railguns, which use electromagnets instead of chemical propellants to fire projectiles at very high velocities, have historically had significant power generation and cooling requirements. These demands mean that complete railgun weapon systems are typically physically very bulky. 06/30/2025 試験艦 あすか 搭載しているレールガン整備中でした。砲身カバーも外して砲身本体も見えました — (´・(ェ)・`) (@Gov_Vessel_fan) June 30, 2025 With all this in mind, TWZ previously noted that installing the railgun turret Asuka's flight deck made good sense from a testing perspective, given the ample open space it offered. Integrating the weapon onto an operational warship in a traditional manner would require meeting the power and cooling demands, as well as finding sufficient space below deck for the various components, in addition to the time and resources for those more extensive modifications. Railguns present additional challenges when it comes to the wear and tear of sustained firing of projectiles at very high speeds. As barrels quickly wear out from extreme friction, the weapon's range and accuracy are degraded, and the potential risk of a catastrophic failure can emerge. In past testing, ATLA has reportedly demonstrated the ability to fire rounds at a velocity of around 4,988 miles per hour (2,230 meters per second; Mach 6.5) while using five megajoules (MJ), or 5 million joules (J), of charge energy. As of April, prior testing goals had included a muzzle velocity of at least 4,473 miles-per-hour (2,000 meters-per-second) and a barrel life of 120 rounds, according to Naval News. Reports say that ATLA has also been working to reduce the weapon's power requirements. In May, Aviation Week reported that at least one at-sea test of Asuka's railgun installation was set to occur sometime in June. Yahoo Japan subsequently published a story saying that the testing window would span from June 9 to July 25. That same piece said that the test ship had been observed departing Yokosuka on June 9, but it is unclear whether or not any live-fire testing has yet taken place. Speaking through an interpreter at a panel discussion at DSEI Japan 2025, Kazumi Ito, principal director of the equipment policy division at ATLA, said Japan's railgun efforts were 'progressing,' but acknowledged 'various challenges,' according to National Defense Magazine. Despite the challenges, Japanese authorities have made clear they are looking toward an operational naval railgun capability in the future. Starting at the DSEI Japan 2025 exposition earlier this year, the Japanese Ministry of Defense has been publicly showing a model of a railgun in a turret with a much more streamlined design than the one currently on Asuka. Railgun GUNDAMのビームライフルみたいなモノらしい!やべー #防衛省#防衛省・自衛隊#レールガン — TAC✩FIGHTER. NJ 7/6札幌SGGM (@Tacforce_japan) July 1, 2025 In a public presentation in 2024, JMSDF Vice Adm. Imayoshi Shinichi, ATLA's director general of Naval Systems, had also highlighted plans to integrate a railgun on future 13DDX destroyers, which are expected to begin entering service in 2024. ATLA has previously shown an artist's conception of a Maya class destroyer, also known as the 27DDG class, armed with a railgun, as well. Japan's future Destroyers and Submarines at CNE 2024 @YouTubeより 13DDX!!!!!!!!レーザー!A-SAM!レールガン!あとなにげにFutureAEGISがASEVに近くない!? — Yasuおすぎ @C106 日曜 東キ-05b (@yasu_osugi) May 28, 2024 The video below, which ATLA put out last year, also depicts ground-based railguns mounted on trucks. As terms of potential operational applications of either naval or ground-based railguns, these weapons hold the promise of being potent anti-air assets, in addition to being able to engage targets at sea and on land. As TWZ has previously written: 'In principle, a practical electromagnetic railgun would offer a highly capable and flexible weapon system that can rapidly engage a wide array of targets at sea, on land, and even in the air, and at considerable ranges. Japan has previously expressed interest in this capability explicitly to help protect against incoming hypersonic threats. Such a weapon would also offer benefits in terms of magazine depth and cost compared to traditional surface-to-air and surface-to-surface missiles, given the small size and lower unit price of the individual rounds.' 'When it comes to warships, in particular, where physical space is at a premium and where options for reloading missiles at sea can be at best extremely limited, having a weapon system firing lower-cost munitions from a large magazine and that can engage a broad swath of target sets would be a clear boon.' Japan is certainly not alone in trying to turn the capabilities that a railgun could offer into a reality. The U.S. Navy and the U.S. Army have experimented with railgun designs in the past two decades or so. The Navy was particularly active on this front from 2005 to 2022, but ultimately shelved that work in the face of persistent technical issues. Planned at-sea testing was never conducted after being repeatedly set back. Interestingly, ATLA has reportedly met with U.S. Navy representatives about potentially leveraging the service's past railgun work. 'In getting closer to the deployment, I believe the scope of collaboration [with the United States] will be expanded,' ATLA's Ito had also said during the DSEI Japan 2025 panel discussion, per National Defense Magazine. In the meantime, the U.S. Navy and the U.S. Army have already continued to leverage hypervelocity projectiles previously developed for the railgun for use in conventional naval and ground-based guns. Using the fast-flying projectiles for air defense applications, including knocking down incoming cruise missiles and drones, remains a particular area of interest. China, a major competitor for Japan on both regional and global levels, has been notably active in developing naval railguns, as well. A turreted railgun first emerged on a People's Liberation Army Navy (PLAN) ship back in 2018. How that development of that design or other Chinese railguns has progressed since then is unclear. Other countries, most notably Turkey, are also now actively pursuing railguns, including for naval use. In 2024, Japanese authorities themselves signed a deal to cooperate on future railgun developments with their counterparts in France and Germany. New details about Japan's progress toward fielding an operational naval railgun may begin to emerge soon based on the results of the testing of the prototype installed on Asuka. Special thanks again to @HNlEHupY4Nr6hRM for sharing the pictures of Asuka with its railgun with us. Howard Altman contributed to this story. Contact the author: joe@
Yahoo
07-06-2025
- Yahoo
This Could Be Our Best View Yet Of China's J-36 Very Heavy Stealth Tactical Jet
A new image appearing to show China's 'J-36' 6th generation tactical jet parked on the ground has emerged online. If legitimate, this would be the best front view of the aircraft to date, notably providing clear proof of the canopy design and further confirmation of a side-by-side seating arrangement. What looks to be three open ventral weapons bays, along with nearby personnel, underscore the design's large size — something of a hybrid between a very heavy fighter and a tactical bomber. You can read more about what is already known about the J-36, as well as the second of China's 6th generation jets, referred to variously as the J-XDS or J-50, in this past in-depth feature. It is immediately worth noting that there are some visual anomalies in the image in question, which is seen at the top of this story and in various parts below, and was clearly taken with a long lens at a distance, low over the ground. Most significantly, areas around the rear end of the aircraft and its dorsal inlet look as though they may have been 'smudged' or 'cloned out' to some degree. This 'missing area' behind the dorsal inlet could also just be glare from a lighter-colored section of the aircraft camouflage paint scheme, or some combination of the two, but it is hard to say definitively. The main gear area — especially the right side of the image) appears to be manipulated or there is something placed there in the shadows. The image is also a picture taken of another picture on a computer monitor, which could cause some visual distortions. In addition, many phone cameras now produce images that are 'enhanced' by default. At the same time, overall, the core image does look legitimate. In addition, the background aligns with an area around an extended-width shelter, and especially the distinctive white slatted jet-blast barrier built behind it. The shelter first appeared at the Chengdu Aircraft Corporation's main plant in the Chinese city of the same name last December. That was when the J-36, together with the J-XDS/J-50, first broke cover. Chengdu is understood to be the developer of the J-36, and the aircraft been observed flying from there on multiple occasions in the past six months. Another secure hangar on the main ramp appears to have been built to support the program, as well. If the image is indeed real, it would fully put to rest the question of whether or not the J-36 has at least a two-seat side-by-side cockpit configuration akin to the U.S.-made F-111 or the Soviet-designed Su-34. The green-tinted reflections from two separate heads-up displays (HUDs) are plainly visible, as seen below. TWZ has previously noted that a crew of two seems most likely to meet the demands of the jet's expected mission sets, as you can read more about more in this past feature. Also, perhaps of the highest interest at this stage, is the very strong evidence, based on the open doors that are visible, of the presence of two smaller weapons bays that flank the jet's large ventral weapons bay. There does not appear to be any confusion between those bay doors and the ones for the aircraft's landing gear. Previous underside views of the J-36 have shown large, molded, outward-hinging doors for the aircraft's large tandem-wheel main landing gear, as well as two smaller doors for the nose gear bay. The possibility of additional weapons bays within the J-36's fuselage to either side of the main bay has been raised in the past, but there has been no clear evidence of that in the past. TWZ has previously highlighted the significant internal volume, overall, that the J-36 clearly has, and the implications thereof, writing: 'The semi-blended ventral central fuselage area has some similarities with the J-20, notably its weapons bay configuration. While the aircraft clearly has a very large internal volume, putting a bit of a bias on fuel fraction over magazine depth would be a good assumption. A weapons bay somewhat longer, but far deeper than that found on the J-20 would provide ample space for multiple smaller stores and at least a couple of very large ones. A rotary weapons rack seems questionable, but if it is possible, it would only be advantageous for certain weapons loadouts featuring numerous, smaller munitions. Additional side bays for air-to-air weaponry, as shown by many fan art depictions, may be possible, although there is no clear evidence of them at this time.' The two auxiliary bays would be especially useful for air-to-air missiles and smaller guided air-to-surface weapons, which would allow the cavernous central bay to be reserved for larger loads, including outsized standoff weapons. Before this image, there was only speculation and fleeting evidence that these bays might exist, but now it seems quite likely they do. You can also see these bay doors swing outward, precluding them from being related to the aircraft's main landing gear. In addition, the new head-on image offers another look at the large aperture windows, typically associated with electro-optical/infrared sensors, on either side of the J-36's nose. We also get an additional view of the lower trapezoidal air inlets on either side of J-36's cockpit, as well as the dorsal inlet, which are linked to the aircraft's unique triple-engine configuration. The lower inlets are broadly similar in shape to those found on the U.S. F-22 Raptor stealth fighter. Otherwise, as noted, the view in the newly emerged image underscores the overall size of the J-36, which is itself a very unusual feature of the design. The ground personnel visible provide an additional sense of scale that we've not had previously. China is known to have been pursuing a 'regional bomber' of sorts, sometimes referred to as the JH-XX, at least in the past. It remains unclear whether or not the J-36 is meant to fulfill the JH-XX requirements in any way, or blend them together in some part with a next-generation heavy fighter role. As TWZ previously wrote in our deep-dive feature into what is known about the J-36, and, to a lesser extent, the J-XDS/J-50: 'Similar to the 6th generation definition issue, putting an aircraft like this into a single bucket is challenging just as an observational exercise, and the reality of how China views it could reflect that. Definitively declaring any new highly advanced platform a 'bomber' in 2025 is also an uninformed simplification or just a casual moniker. Just as the B-21 is a multi-role platform, the JH-XX, and even the H-20, would be as well, with the latter's less traditional capabilities possibly expanding more slowly over time. While fine to use casually, the term 'bomber' is now a traditional carry-over that is unrepresentative of what any new long-range, high-end combat aircraft will be capable of.' The new image of the J-36 is the latest in a steady stream of increasingly more interesting visuals of that aircraft, as well as the J-XDS/J-50, which continue to offer more and more insights into both designs. Just in the past week, we had already gotten our first real head-on look at the J-36. This all follows typical trends with regard to 'leaked' imagery of new Chinese aircraft and other military assets, and as we stated in our original analysis, we would likely get an image like this by Summer. More detailed images, as well as one from the rear aspects will surely come. Contact the author: joe@