logo
Dairy Focus: Converting to milking to support the next generation

Dairy Focus: Converting to milking to support the next generation

Agriland29-06-2025
After being 20 years away from dairy farming, Co. Kilkenny dairy farmer, Sean Meehan has made the plunge back to milking cows in order to have something for the next generation.
He told Agriland :'I wanted a future for some of the lads and there is no future in sucklers'.
Meehan is now in his fourth year of milking after spending the previous 20 years at suckler cows and an off-farm business.
As well as having a love for dairy cows, Meehan wanted to go back milking to have a strong farm business that he can pass down to his sons.
The only way that Meehan saw this as possibility was milking cows through two robots, which would alleviate a lot of labour and pressure on the farmer.
The shed for the cows to access the two robots Sean with the two GEA robots on the farm
Meehan is now milking 101 British Friesian and Fleckvieh cows, and hopes to keep his herd number between 100-120 while keeping within nitrates regulations.
Speaking about the two robots on the farm, Meehan said: 'You've still work to do, but it's flexible. You don't have to be up at 7:00 in the morning, every morning, and if you want to do other work, you've time'.
Dairy herd performance
The cows are currently milking on average about 2.4 milkings each day and producing about 29.87kg of milk/day, which equates to 570kg of milk solids/cow year off 8,043L/cow/year.
The grazing block is 38ha and is split into an ABC grazing system where cows spend on average about eight hours/day in each block.
They go from each block by passing through the robot milking area and getting milked if necessary.
To get the ball rolling, Meehan bought 85 heifers in the first year and then climbed his numbers up to 118 the following year.
This number proved to be too many the following year for nitrates compliancy, but now – with additional land rented – he hopes to get back up to those numbers.
Meehan went with Fleckvieh heifers and Holstein Friesian cows to get a balance in milk production and calf value.
He said that in terms of milk, 'There is a much of a muchness between the two.
'From a calf sale point of view, the Fleckvieh is much better.'
The herd of cows grazing on the A morning block A closer look at the herd
This year due to a lack of bull variety in the Fleckvieh range, Meehan has bought a mixture of Fleckvieh, Montbeliarde, and Friesian straws.
He included Montbeliarde in the mix due to their ability to milk and add calf value to the farm, and he felt there was a good range of bulls available through Bó Sires.
Meehan uses all artificial insemination (AI) throughout his 12-week breeding season, which commences around the middle of April.
He said: 'Friesian cows will get conventional Fleckvieh or Montbeliarde straws and the Fleckvieh will get Friesian sexed semen.
'With the Fleckvieh or Montbeliarde, you don't mind if it's a bull or a heifer.'
The reason for this was that, according to Meehan, 'the best cows in the herd are probably the crossbreds' and so he wants to continue crossing to achieve that hybrid vigour.
He aims to keep 25 replacement heifer calves each year.
Meehan's replacement calves grazing ahead of the cows The next generation of milkers on Meehan's farm
The use of the GEA CowScout collars has been a 'revelation' for Meehan for detecting health issues, feed intake, and heat activity, as he believes his conception rates have improved due to getting the timing of AI 100%.
In choosing the type of bull to mate to his cows, Meehan said that he is always looking for good milk solids, with good feet and good health traits.
For the rest of the breeding season, Meehan is using Aberdeen Angus straws due to their short gestation. He has also used a few Limousin straws on cows not suitable for breeding off at the start of breeding.
Meehan aims to start calving around the middle of January and to be finished before April, but highlighted that he is not overly pushed on a tight six-week calving rate.
The key to the robots is having a good grazing infrastructure All roadways are in good order with multiple access points to paddocks
If there is a few late calvers, it does not bother him, as he milks about 40 cows throughout Christmas, which is easily done with robots but is still achieving a 380-day calving interval.
Despite the few cows milking through the Christmas period, he will give every cow at least an eight week dry-off period, and will keep winter milkers on a high quality silage and meal.
The ease of robots
Meehan is milking through two GEA DairyRobot R9500s, which has taken the pressure off labour and enabled him to be more efficient in managing his spring calving herd.
As well as improving the lifestyle on the farm, Meehan chose automatic milking as it made sense with the existing shed, which lent itself to a conversion complemented by an additional building to house the robots.
The reason Meehan went with the GEA robots was he was impressed with the fact that 'you can get down into the pit with the cows and you can manage and stay with heifers when training them'.
A closer look at the GEA robot The race and access gates coming from the robots
Another deciding factor was the layout of the robots. He wanted a layout that was simple, as the cows go out a single race when finished milking.
He said that these little details were the deciding factor after he looked at all types of robots over three years.
The cows are free to enter the robot at any time, but only animals meeting time or yield-based criteria are then milked and fed.
Meehan told Agriland : 'The whole secret to yield and the robots is good grassland management.'
He highlighted that through his ABC grazing system, 'you get great clean outs'.
The type of residuals being achieved on the farm There are multiple access points to both paddocks and water troughs
Meehan said that the cows have three different grass allocations with fresh grass in each, which he feels boosts performance through higher grass intakes and that 'the cows get used to grazing out paddocks fully'.
Meehan fed the cows about 1.5t of meal/cow last year and made the rest of the diet up with quality grass.
He insisted that 'the robots improve your grassland management', as keeping fresh grass in front of cows is what entices the herd to go in for milking.
Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Farmers hold all the cards when it comes to beef
Farmers hold all the cards when it comes to beef

Irish Examiner

time2 days ago

  • Irish Examiner

Farmers hold all the cards when it comes to beef

Beef processors have been forced to halt price pulling due to dwindling beef supplies. ICMSA Livestock Committee Chairperson, Michael O'Connell, has said some beef processors 'have sought to pull the wool over farmers' eyes' by quoting lower base prices for steers and heifers. Processors have been quoting base prices of €7 for steers and €7.10 for heifers; however, an additional 20-30c/kg is available for farmers. 'Processors should be ashamed to quote €7.00/kg base price for steers when they are giving up to €6.70c/kg flat for P and O grade Friesian cull cows. That leaves a prime underage P+3 Friesian steer at the same nominal value as a P grade cow,' said Mr O'Connell. Mr O'Connell went on to say that for the past 10 days, processors have felt the pressure on supply due to the end of shed-finished cattle and a slow start to cattle coming from grass. 'We have seen in the past month or so, kill plans being reduced as a means of controlling price and supply, but this can't last forever, and the demand for Irish beef across Europe is huge,' cautioned Mr O'Connell. 'I'm sure factories are praying that the 'calendar beef farming' 30-month age limit will convince farmers with January and February 2023-born cattle to consider slaughtering these shortly. But the weather is favourable and cattle are thriving well - there is no pressure to kill them… They'd be much better off just acknowledging the reality that we all see and go out and buy the cattle from farmers as opposed to going into the farmers' yards and looking foolish by offering obviously below-par prices,' said Mr O'Connell. Noting that the numbers of cattle across Europe are at an all-time low, Mr O'Connell stated that Irish live exports have never been as strong due to our Bluetongue-free status. 'We are sure that the volumes of 2023 and 2024 born cattle leaving the country have added to the pressures on processors. Demand for Irish cattle is off the charts and is going to continue with predictions of the EU herd falling by a further 5 to 7% this year,' Mr O'Connell said. The Livestock committee Chair also called for the 'big players' in Irish processing to recognise the value of Irish beef and live exports, with European counterparts able to recognise the high environmental and legislative standards Irish beef meets. 'For the last fortnight, reality reasserted itself, and we see the factories getting nervous about the numbers and unable to pull prices further. The pressure is on them; the old tricks and ruses aren't working because the facts are just overriding them. ICMSA's advice is: keep possession and only sell when they are receiving the true value of the cattle,' suggested Mr O'Connell. Mr O'Connell invites farmers to study their options with finished cattle. He says that loyalty to processors should be gone following the price cuts of the last few weeks, and farmers should not take the first price offered to them by agents. 'The pressure is off farmers with the improvement in the weather; cattle are content and thriving, and the majority of silage has been cut. By contrast, the pressure on processors has increased and we're telling farmers to stand their ground on beef prices in the coming weeks,' concluded Mr O'Connell.

Dairy Focus: Converting to milking to support the next generation
Dairy Focus: Converting to milking to support the next generation

Agriland

time29-06-2025

  • Agriland

Dairy Focus: Converting to milking to support the next generation

After being 20 years away from dairy farming, Co. Kilkenny dairy farmer, Sean Meehan has made the plunge back to milking cows in order to have something for the next generation. He told Agriland :'I wanted a future for some of the lads and there is no future in sucklers'. Meehan is now in his fourth year of milking after spending the previous 20 years at suckler cows and an off-farm business. As well as having a love for dairy cows, Meehan wanted to go back milking to have a strong farm business that he can pass down to his sons. The only way that Meehan saw this as possibility was milking cows through two robots, which would alleviate a lot of labour and pressure on the farmer. The shed for the cows to access the two robots Sean with the two GEA robots on the farm Meehan is now milking 101 British Friesian and Fleckvieh cows, and hopes to keep his herd number between 100-120 while keeping within nitrates regulations. Speaking about the two robots on the farm, Meehan said: 'You've still work to do, but it's flexible. You don't have to be up at 7:00 in the morning, every morning, and if you want to do other work, you've time'. Dairy herd performance The cows are currently milking on average about 2.4 milkings each day and producing about 29.87kg of milk/day, which equates to 570kg of milk solids/cow year off 8,043L/cow/year. The grazing block is 38ha and is split into an ABC grazing system where cows spend on average about eight hours/day in each block. They go from each block by passing through the robot milking area and getting milked if necessary. To get the ball rolling, Meehan bought 85 heifers in the first year and then climbed his numbers up to 118 the following year. This number proved to be too many the following year for nitrates compliancy, but now – with additional land rented – he hopes to get back up to those numbers. Meehan went with Fleckvieh heifers and Holstein Friesian cows to get a balance in milk production and calf value. He said that in terms of milk, 'There is a much of a muchness between the two. 'From a calf sale point of view, the Fleckvieh is much better.' The herd of cows grazing on the A morning block A closer look at the herd This year due to a lack of bull variety in the Fleckvieh range, Meehan has bought a mixture of Fleckvieh, Montbeliarde, and Friesian straws. He included Montbeliarde in the mix due to their ability to milk and add calf value to the farm, and he felt there was a good range of bulls available through Bó Sires. Meehan uses all artificial insemination (AI) throughout his 12-week breeding season, which commences around the middle of April. He said: 'Friesian cows will get conventional Fleckvieh or Montbeliarde straws and the Fleckvieh will get Friesian sexed semen. 'With the Fleckvieh or Montbeliarde, you don't mind if it's a bull or a heifer.' The reason for this was that, according to Meehan, 'the best cows in the herd are probably the crossbreds' and so he wants to continue crossing to achieve that hybrid vigour. He aims to keep 25 replacement heifer calves each year. Meehan's replacement calves grazing ahead of the cows The next generation of milkers on Meehan's farm The use of the GEA CowScout collars has been a 'revelation' for Meehan for detecting health issues, feed intake, and heat activity, as he believes his conception rates have improved due to getting the timing of AI 100%. In choosing the type of bull to mate to his cows, Meehan said that he is always looking for good milk solids, with good feet and good health traits. For the rest of the breeding season, Meehan is using Aberdeen Angus straws due to their short gestation. He has also used a few Limousin straws on cows not suitable for breeding off at the start of breeding. Meehan aims to start calving around the middle of January and to be finished before April, but highlighted that he is not overly pushed on a tight six-week calving rate. The key to the robots is having a good grazing infrastructure All roadways are in good order with multiple access points to paddocks If there is a few late calvers, it does not bother him, as he milks about 40 cows throughout Christmas, which is easily done with robots but is still achieving a 380-day calving interval. Despite the few cows milking through the Christmas period, he will give every cow at least an eight week dry-off period, and will keep winter milkers on a high quality silage and meal. The ease of robots Meehan is milking through two GEA DairyRobot R9500s, which has taken the pressure off labour and enabled him to be more efficient in managing his spring calving herd. As well as improving the lifestyle on the farm, Meehan chose automatic milking as it made sense with the existing shed, which lent itself to a conversion complemented by an additional building to house the robots. The reason Meehan went with the GEA robots was he was impressed with the fact that 'you can get down into the pit with the cows and you can manage and stay with heifers when training them'. A closer look at the GEA robot The race and access gates coming from the robots Another deciding factor was the layout of the robots. He wanted a layout that was simple, as the cows go out a single race when finished milking. He said that these little details were the deciding factor after he looked at all types of robots over three years. The cows are free to enter the robot at any time, but only animals meeting time or yield-based criteria are then milked and fed. Meehan told Agriland : 'The whole secret to yield and the robots is good grassland management.' He highlighted that through his ABC grazing system, 'you get great clean outs'. The type of residuals being achieved on the farm There are multiple access points to both paddocks and water troughs Meehan said that the cows have three different grass allocations with fresh grass in each, which he feels boosts performance through higher grass intakes and that 'the cows get used to grazing out paddocks fully'. Meehan fed the cows about 1.5t of meal/cow last year and made the rest of the diet up with quality grass. He insisted that 'the robots improve your grassland management', as keeping fresh grass in front of cows is what entices the herd to go in for milking.

How calf and cull cow value matter just as much as milk yield for this 120-cow Kerry dairy farmer
How calf and cull cow value matter just as much as milk yield for this 120-cow Kerry dairy farmer

Irish Independent

time27-06-2025

  • Irish Independent

How calf and cull cow value matter just as much as milk yield for this 120-cow Kerry dairy farmer

Michael Cooper has expanded his enterprise by buying three blocks of land, building new sheds and a parlour, and importing Fleckviehs – after discovering the breed on YouTube while waiting on a cow to calve Michael Cooper's approach to dairy farming goes beyond litres of milk in the tank. For him, breeding high-quality calves that command premium prices and securing strong cull cow prices are equally important. Farming full-time for nearly 30 years since taking over from his late father at the age of 18 Michael has expanded the enterprise from 90 British Friesian and Holstein cows on 75ac to 120 predominantly Fleckvieh cows on a 200ac grazing platform.

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store