These college majors have the best job prospects — and they aren't what students expect
In fact, U.S. graduates believe that finance offers the best career prospects overall, considering today's economic climate, according to a new survey by the CFA Institute, a non-profit focused on financial education. The group polled more than 9,000 current college students and recent graduates between the ages of 18 and 25.
While confidence about career prospects in finance increased over the past year, confidence decreased in other areas including STEM and healthcare, the CFA Institute also found.
However, finance ranks well behind many other majors when it comes to employment opportunities after college, other data shows.
More from Personal Finance:Trump aims to slash Pell GrantsStudent loan borrowers face 'default cliff', report findsWhat the endowment tax in Trump's megabill may mean for college
"For me, a career in finance represents a pivot to stability," said Rafael Perez, 29, who is pursuing a Master of Science degree in finance at California State University in Sacramento. "I've been a creative my entire life, so discovering my affinity for finance was a relief in a sense."
Perez says he still experiences some pushback from his peers. "When I tell people I'm getting an MS in finance, they often jokingly call me a 'finance bro,'" he said. "Despite the negative connotations of the phrase, it also reflects an expectation of financial success and prestige."
Students and their families are paying more attention to which college majors are most likely to pay off, and are putting greater emphasis on a degree's return on investment, according to Peter Watkins, CFA Institute's senior director of university programs. "There's an awareness from students that they have to make sure the degrees will make them work-ready," he said.
As young adults enter the real world, they are facing an increasingly tight labor market.
According to a recent analysis of labor market conditions for recent college graduates by the Federal Reserve Bank of New York, job opportunities "deteriorated noticeably in the first quarter of 2025." Among this group, the unemployment rate jumped to 5.8% — the highest reading since 2021.
Although finance majors had higher salaries compared to most other majors, grads with nutrition, art history and philosophy degrees all outperformed both finance and STEM fields when it comes to employment prospects, the New York Fed found.
For finance and computer science, the unemployment rate in those fields was 3.7% and 6.1%, respectively. By comparison, the unemployment rate for art history majors was 3%, and for nutritional sciences, the unemployment rate was just 0.4%, the New York Fed found.
After notching significant gains since 2020, the rise of computer science majors came to a near standstill this year, other reports show, fueled by concerns that artificial intelligence is rapidly taking over jobs in the field.
Economics majors also fared worse than majors such as theology and philosophy when it came to the employment rates for recent college graduates, according to the New York Fed. Philosophy majors have an unemployment rate of 3.2%, for example, and for economics, it's 4.9%.
The New York Fed's report was based on Census data from 2023 and unemployment rates of recent college graduates.
The disconnect between the New York Fed's outcomes by major and the CFA survey findings — which is based on perceptions — is likely due in part to societal expectations, particularly from parents, Watkins said. "It may possibly be parental guidance, as in, 'go for business,'" he said.
Meanwhile, demand for humanities majors is on the rise, and with good reason.
At a conference last year, Robert Goldstein, the chief operating officer of BlackRock, the world's biggest money manager, said the firm was adjusting its hiring strategy for recent grads. "We have more and more conviction that we need people who majored in history, in English, and things that have nothing to do with finance or technology," Goldstein said.
This demand for liberal arts degrees is fueled by the rise of artificial intelligence, which drives the need for creative thinking and so-called soft skills.
"It's a bit of a gold rush in AI, people who are adopting quickly are going to succeed quickly," Watkins said.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
The Hill
32 minutes ago
- The Hill
US manufacturers are stuck in a rut despite subsidies from Biden and protection from Trump
WASHINGTON (AP) — Democrats and Republicans don't agree on much, but they share a conviction that the government should help American manufacturers, one way or another. Democratic President Joe Biden handed out subsidies to chipmakers and electric vehicle manufacturers. Republican President Donald Trump is building a wall of import taxes — tariffs — around the U.S. economy to protect domestic industry from foreign competition. Yet American manufacturing has been stuck in a rut for nearly three years. And it remains to be seen whether the trend will reverse itself. The U.S. Labor Department reports that American factories shed 7,000 jobs in June for the second month in a row. Manufacturing employment is on track to drop for the third straight year. The Institute for Supply Management, an association of purchasing managers, reported that manufacturing activity in the United States shrank in June for the fourth straight month. In fact, U.S. factories have been in decline for 30 of the 32 months since October 2022, according to ISM. 'The past three years have been a real slog for manufacturing,'' said Eric Hagopian, CEO of Pilot Precision Products, a maker of industrial cutting tools in South Deerfield, Massachusetts. 'We didn't get destroyed like we did in the recession of 2008. But we've been in this stagnant, sort of stationary environment.'' Big economic factors contributed to the slowdown: A surge in inflation, arising from the unexpectedly strong economic recovery from COVID-19, raised factory expenses and prompted the Federal Reserve to raise interest rates 11 times in 2022 and 2023. The higher borrowing costs added to the strain. Government policy was meant to help. Biden's tax incentives for semiconductor and clean energy production triggered a factory-building boom – investment in manufacturing facilities more than tripled from April 2021 through October 2024 – that seemed to herald a coming surge in factory production and hiring. Eventually anyway. But the factory investment spree has faded as the incoming Trump administration launched trade wars and, working with Congress, ended Biden's subsidies for green energy. Now, predicts Mark Zandi, chief economist at Moody's Analytics, 'manufacturing production will continue to flatline.' 'If production is flat, that suggests manufacturing employment will continue to slide,' Zandi said. 'Manufacturing is likely to suffer a recession in the coming year.'' Meanwhile, Trump is attempting to protect U.S. manufacturers — and to coax factories to relocate and produce in America — by imposing tariffs on goods made overseas. He slapped 50% taxes on steel and aluminum, 25% on autos and auto parts, 10% on many other imports. In some ways, Trump's tariffs can give U.S. factories an edge. Chris Zuzick, vice president at Waukesha Metal Products, said the Sussex, Wisconsin-based manufacturer is facing stiff competition for a big contract in Texas. A foreign company offers much lower prices. But 'when you throw the tariff on, it gets us closer,'' Zuzick said. 'So that's definitely a situation where it's beneficial.'' But American factories import and use foreign products, too – machinery, chemicals, raw materials like steel and aluminum. Taxing those inputs can drive up costs and make U.S producers less competitive in world markets. Consider steel. Trump's tariffs don't just make imported steel more expensive. By putting the foreign competition at a disadvantage, the tariffs allow U.S. steelmakers to raise prices – and they have. U.S.-made steel was priced at $960 per metric ton as of June 23, more than double the world export price of $440 per ton, according to industry monitor SteelBenchmarker. In fact, U.S. steel prices are so high that Pilot Precision Products has continued to buy the steel it needs from suppliers in Austria and France — and pay Trump's tariff. Trump has also created considerable uncertainty by repeatedly tweaking and rescheduling his tariffs. Just before new import taxes were set to take effect on dozens of countries on July 9, for example, the president pushed the deadline back to Aug. 1 to allow more time for negotiation with U.S. trading partners. The flipflops have left factories, suppliers and customers bewildered about where things stand. Manufacturers voiced their complaints in the ISM survey: 'Customers do not want to make commitments in the wake of massive tariff uncertainty,'' a fabricated metal products company said. 'Tariffs continue to cause confusion and uncertainty for long-term procurement decisions,'' added a computer and electronics firm. 'The situation remains too volatile to firmly put such plans into place.'' Some may argue that things aren't necessarily bad for U.S. manufacturing; they've just returned to normal after a pandemic-related bust and boom. Factories slashed nearly 1.4 million jobs in March and April 2020 when COVID-19 forced many businesses to shut down and Americans to stay home. Then a funny thing happened: American consumers, cooped up and flush with COVID relief checks from the government, went on a spending spree, snapping up manufactured goods like air fryers, patio furniture and exercise machines. Suddenly, factories were scrambling to keep up. They brought back the workers they laid off – and then some. Factories added 379,000 jobs in 2021 — the most since 1994 — and then tacked on another 357,000 in 2022. But in 2023, factory hiring stopped growing and began backtracking as the economy returned to something closer to the pre-pandemic normal. In the end, it was a wash. Factory payrolls last month came to 12.75 million, almost exactly where they stood in February 2020 (12.74 million) just before COVID slammed the economy. 'It's a long, strange trip to get back to where we started,'' said Jared Bernstein, chair of Biden's White House Council of Economic Advisers. Zuzick at Waukesha Metal Products said that it will take time to see if Trump's tariffs succeed in bringing factories back to America. 'The fact is that manufacturing doesn't turn on a dime,'' he said. 'It takes time to switch gears.'' Hagopian at Pilot Precision is hopeful that tax breaks in Trump's One Big Beautiful Bill will help American manufacturing regain momentum. 'There may be light at the end of the tunnel that may not be a locomotive bearing down,'' he said. For now, manufacturers are likely to delay big decisions on investing or bringing on new workers until they see where Trump's tariffs settle and what impact they have on the economy, said Ned Hill, professor emeritus in economic development at Ohio State University. 'With all this uncertainty about what the rest of the year is going to look like,'' he said, 'there's a hesitancy to hire people just to lay them off in the near future.'' 'Everyone,' said Zuzick at Waukesha Metal Products, 'is kind of just waiting for the new normal.''
CNBC
34 minutes ago
- CNBC
Dollar a touch higher, currency reaction muted as Trump's deals 30% tariff threat to EU and Mexico
The euro briefly hit a three-week low on Monday before partially recovering, while the dollar gained marginally after U.S. President Donald Trump threatened to impose a 30% tariff on imports from two of the largest U.S. trading partners from Aug. 1. Analysts pointed to the so-called TACO (Trump always chickens out) trade as keeping a cap on any bigger moves in forex markets. Trump on Saturday announced the latest tariffs in separate letters to European Commission President Ursula von der Leyen and Mexican President Claudia Sheinbaum that were posted on his Truth Social media site. Both the European Union and Mexico described the tariffs as unfair and disruptive, while the EU said it would extend its suspension of countermeasures to U.S. tariffs until early August and continue to press for a negotiated settlement. "If Trump actually manages to extract significant concessions from U.S. trading partners by threatening them with tariffs, this could be seen as positive for the dollar. This is especially true if the concessions involve trading partners lowering their tariffs on U.S. products," wrote Commerzbank analysts in a morning note. However they also flagged a downside to the U.S. dollar being the high uncertainty facing U.S. companies as they face potential tariffs at any time, and the impact on their willingness to invest. Reaction in the currency market to Trump's latest tariff threats was largely muted, though the euro did slip to a roughly three-week low early in the session. The single currency later regained some ground and last traded 0.1% lower at $1.168175. Elsewhere, sterling was down 0.1% to $1.3475, while the Japanese yen rose marginally to 147.33 per dollar. Against the Mexican peso, the dollar rose 0.3% to 18.683. Investors have grown increasingly desensitized to Trump's slew of tariff threats, with his latest upheaval in the global trade landscape doing little to prevent U.S. stocks from scaling record highs and offering just a slight boost to the dollar. "It seems like financial markets have become insensitive to President Trump's tariff threats now, after so many of them in the past few months," said Carol Kong, a currency strategist at Commonwealth Bank of Australia. "Judging by the limited market reaction, markets might think that the latest threat from Trump is actually a manoeuvre to extract more concessions." In other currencies, the Australian dollar fell 0.11% to $0.65665, while the New Zealand dollar slid 0.36% to $0.5988. Outside of tariff news, Trump on Sunday said that it would be a "great thing" if Federal Reserve Chair Jerome Powell stepped down, again threatening to undermine the central bank's independence as he called for interest rates to be lowered. Traders could get a better clue on the future path for U.S. rates when inflation data for June comes due on Tuesday, where expectations are for U.S. consumer prices to have picked up slightly last month. Markets are currently pricing in just over 50 basis points worth of Fed easing by December. In Asia, data on Monday showed China's exports regained momentum in June while imports rebounded, as exporters rushed out shipments to capitalize on a fragile tariff truce between Beijing and Washington ahead Trump's August deal deadline.
San Francisco Chronicle
38 minutes ago
- San Francisco Chronicle
US manufacturers are stuck in a rut despite subsidies from Biden and protection from Trump
WASHINGTON (AP) — Democrats and Republicans don't agree on much, but they share a conviction that the government should help American manufacturers, one way or another. Democratic President Joe Biden handed out subsidies to chipmakers and electric vehicle manufacturers. Republican President Donald Trump is building a wall of import taxes — tariffs — around the U.S. economy to protect domestic industry from foreign competition. Yet American manufacturing has been stuck in a rut for nearly three years. And it remains to be seen whether the trend will reverse itself. The U.S. Labor Department reports that American factories shed 7,000 jobs in June for the second month in a row. Manufacturing employment is on track to drop for the third straight year. The Institute for Supply Management, an association of purchasing managers, reported that manufacturing activity in the United States shrank in June for the fourth straight month. In fact, U.S. factories have been in decline for 30 of the 32 months since October 2022, according to ISM. 'The past three years have been a real slog for manufacturing,'' said Eric Hagopian, CEO of Pilot Precision Products, a maker of industrial cutting tools in South Deerfield, Massachusetts. 'We didn't get destroyed like we did in the recession of 2008. But we've been in this stagnant, sort of stationary environment.'' Big economic factors contributed to the slowdown: A surge in inflation, arising from the unexpectedly strong economic recovery from COVID-19, raised factory expenses and prompted the Federal Reserve to raise interest rates 11 times in 2022 and 2023. The higher borrowing costs added to the strain. Government policy was meant to help. Biden's tax incentives for semiconductor and clean energy production triggered a factory-building boom – investment in manufacturing facilities more than tripled from April 2021 through October 2024 – that seemed to herald a coming surge in factory production and hiring. Eventually anyway. But the factory investment spree has faded as the incoming Trump administration launched trade wars and, working with Congress, ended Biden's subsidies for green energy. Now, predicts Mark Zandi, chief economist at Moody's Analytics, 'manufacturing production will continue to flatline.' 'If production is flat, that suggests manufacturing employment will continue to slide,' Zandi said. 'Manufacturing is likely to suffer a recession in the coming year.'' Meanwhile, Trump is attempting to protect U.S. manufacturers — and to coax factories to relocate and produce in America — by imposing tariffs on goods made overseas. He slapped 50% taxes on steel and aluminum, 25% on autos and auto parts, 10% on many other imports. In some ways, Trump's tariffs can give U.S. factories an edge. Chris Zuzick, vice president at Waukesha Metal Products, said the Sussex, Wisconsin-based manufacturer is facing stiff competition for a big contract in Texas. A foreign company offers much lower prices. But 'when you throw the tariff on, it gets us closer,'' Zuzick said. 'So that's definitely a situation where it's beneficial.'' But American factories import and use foreign products, too – machinery, chemicals, raw materials like steel and aluminum. Taxing those inputs can drive up costs and make U.S producers less competitive in world markets. Consider steel. Trump's tariffs don't just make imported steel more expensive. By putting the foreign competition at a disadvantage, the tariffs allow U.S. steelmakers to raise prices – and they have. U.S.-made steel was priced at $960 per metric ton as of June 23, more than double the world export price of $440 per ton, according to industry monitor SteelBenchmarker. In fact, U.S. steel prices are so high that Pilot Precision Products has continued to buy the steel it needs from suppliers in Austria and France — and pay Trump's tariff. Trump has also created considerable uncertainty by repeatedly tweaking and rescheduling his tariffs. Just before new import taxes were set to take effect on dozens of countries on July 9, for example, the president pushed the deadline back to Aug. 1 to allow more time for negotiation with U.S. trading partners. The flipflops have left factories, suppliers and customers bewildered about where things stand. Manufacturers voiced their complaints in the ISM survey: 'Customers do not want to make commitments in the wake of massive tariff uncertainty,'' a fabricated metal products company said. 'Tariffs continue to cause confusion and uncertainty for long-term procurement decisions,'' added a computer and electronics firm. 'The situation remains too volatile to firmly put such plans into place.'' Some may argue that things aren't necessarily bad for U.S. manufacturing; they've just returned to normal after a pandemic-related bust and boom. Factories slashed nearly 1.4 million jobs in March and April 2020 when COVID-19 forced many businesses to shut down and Americans to stay home. Then a funny thing happened: American consumers, cooped up and flush with COVID relief checks from the government, went on a spending spree, snapping up manufactured goods like air fryers, patio furniture and exercise machines. Suddenly, factories were scrambling to keep up. They brought back the workers they laid off – and then some. Factories added 379,000 jobs in 2021 — the most since 1994 — and then tacked on another 357,000 in 2022. But in 2023, factory hiring stopped growing and began backtracking as the economy returned to something closer to the pre-pandemic normal. In the end, it was a wash. Factory payrolls last month came to 12.75 million, almost exactly where they stood in February 2020 (12.74 million) just before COVID slammed the economy. 'It's a long, strange trip to get back to where we started,'' said Jared Bernstein, chair of Biden's White House Council of Economic Advisers. Zuzick at Waukesha Metal Products said that it will take time to see if Trump's tariffs succeed in bringing factories back to America. 'The fact is that manufacturing doesn't turn on a dime,'' he said. 'It takes time to switch gears.'' Hagopian at Pilot Precision is hopeful that tax breaks in Trump's One Big Beautiful Bill will help American manufacturing regain momentum. 'There may be light at the end of the tunnel that may not be a locomotive bearing down,'' he said. For now, manufacturers are likely to delay big decisions on investing or bringing on new workers until they see where Trump's tariffs settle and what impact they have on the economy, said Ned Hill, professor emeritus in economic development at Ohio State University. 'With all this uncertainty about what the rest of the year is going to look like,'' he said, 'there's a hesitancy to hire people just to lay them off in the near future.'' 'Everyone,'' said Zuzick at Waukesha Metal Products, 'is kind of just waiting for the new normal.''
