New Porsche Hypercar Teased as Modern 911 GT1 Successor
Teaser Confirms Road-Legal Version of LMDh Car
In a black-and-white YouTube video hashtagged #RACEBORN, Porsche has teased its upcoming 963 RSP, a one-off road-going version of the LMDh racecar that won races in WEC and IMSA. Back in April, Porsche hinted at an upcoming street-legal hypercar by highlighting its 1975 917 race car, which was also converted for street use. Now we know that the imminent reveal will be of the road-legal version of the 2023 963 endurance racer that won twice at the 24 Hours of Daytona.
Porsche 963 at Long Beach —
Source: Porsche
A Racer For The Road, Named For A Legend
The 963 RSP is presumed to be built for Roger Seale Penske – hence the 'RSP' moniker that's never been used on a Porsche before. Penske owns the team that runs Porsche's factory endurance-racing program, and is the most successful team owner in motor-racing history, winning four out of five championships in 2024 alone in the FIA WEC and IMSA seasons. The car is expected to stay true to the racer, with the same twin-turbocharged 4.6-liter V8, hybrid system, and seven-speed sequential transmission.
Porsche has done this before when it handcrafted a single road-legal example of the 1996 911 GT1 Le Mans racer that competed in the GT1 class in the 24 Hours of Le Mans – which it called the 911 GT1 Strassenversion. The 963 RSP is similarly handcrafted, and in Porsche's teaser video, Porsche workers sand down carbon-fiber panels, mix paint, do interior stitchwork, and generally apply their specialist trades to finish the one-of-one masterpiece. With the teasers now starting, it won't be long before one of the most covetable Porsches of the modern era is revealed to the world.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Auto Blog
5 hours ago
- Auto Blog
Manhart Turns Porsche 911 Turbo S Into Hardcore Supercar
This is the 911 to have if you're in a hurry. Manhart Has Pulled Off Something Special Everyone wants a piece of Porsche's quickest 911 right now. Earlier this week, Gunther Werks released an exorbitantly priced aero kit for the 991 Turbo S, but that didn't add more power or performance to the 640-horsepower sports car. Fortunately, Manhart exists and has just revealed the TR 900 II, a 992-gen Turbo S that has been enhanced with a comprehensive performance kit. The result is a Porsche 911 with outrageous power and hardcore looks to match. Source: Manhart EV-Like Power And Torque Hybrids and EVs have long surpassed pure ICE cars in raw power and torque, but Manhart has shown what's possible without any electric assistance. Whereas the stock Turbo S produces 640 hp and 590 lb-ft of torque, the TR 900 II dials things all the way up to 922 hp and 804 lb-ft. That 922-hp figure is presumably metric horsepower, but it still works out to 909 imperial hp – far surpassing the standard Turbo S. The flat-six engine has been boosted by a Manhart Turbo performance kit, in addition to ECU remapping. A new stainless steel exhaust with valve control has also been fitted, as have race downpipes with 200-cell catalytic converters. The seven-speed dual-clutch automatic has been beefed up to cope with the extra power, but the standard carbon-ceramic brakes have been left as is, since they're already powerful and durable enough to cope with the normal Turbo S' incredible performance. Manhart makes no claims about how quick the TR 900 II is, but based on the fact that the stock Turbo S hits 60 in 2.6 seconds, we expect a time in the low two-second range; at this level, even a few tenths shaved off the normal Turbo S time would be a massive achievement. Autoblog Newsletter Autoblog brings you car news; expert reviews and exciting pictures and video. Research and compare vehicles, too. Sign up or sign in with Google Facebook Microsoft Apple By signing up I agree to the Terms of Use and acknowledge that I have read the Privacy Policy . You may unsubscribe from email communication at anytime. It Looks The Part, Too The standard 911 Turbo S is not the most impactful 911 to look at – that's a role reserved for the likes of the track-focused GT3 RS. But the TR 900 II is no ordinary 911, and it shouldn't look like one. To that end, Manhart added Concave One forged wheels measuring 21 inches in front and 22 inches at the back. The body sits 1.2 inches lower, thanks to Manhart lowering springs by H&R, giving this Porsche an even more menacing stance. A Moshammer aero kit includes a front spoiler, side skirts, and a rear diffuser. A larger carbon rear spoiler completes the look. Source: Manhart Black stripes on the body and unique wheel finishes are complemented by a Manhart steering wheel logo and Manhart-branded floor mats inside, but otherwise, the interior hasn't been changed too much. No price was provided for the TR 900 II, but expect a figure far beyond the $230,400 of the standard Turbo S. This level of power doesn't come cheap, even if using all of it may prove to be a mighty challenge in the real world. About the Author Karl Furlong View Profile
Auto Blog
5 hours ago
- Auto Blog
One-Off Porsche 963 RSP Is The Ultimate Roadgoing Racecar
Porsche 963 RSP Pays Tribute To 917 It's here, and as expected, the Porsche 963 RSP is a one-off road-going monster based on the automaker's Le Mans Hypercar contender, created for none other than Roger Penske, who nearly became a professional racing driver himself. He and Porsche have enjoyed a long and successful motorsport relationship that stretches back to 1972, and with the pair still working together in endurance racing in 2025, it's only fitting that the man who helped Porsche achieve glory in motorsport is honored with a one-off car like no other. Porschephiles will know that Porsche famously did something similar in 1975, when the Count Rossi 917 was created for one wealthy enthusiast. Just as was the case then, this was no easy feat. Significant Mechanical Changes Required For Road Use To clear at least some speed bumps, the suspension was raised to its maximum ride height, and the Multimatic DSSV dampers were calibrated to their softest setting. Even so, some images reveal a car that barely clears small obstructions. Then again, we doubt Mr. Penske uses roads with lots of potholes very often. Changes were also made to the lighting and turn signal systems to ensure they're suitable for road use without dazzling or confusing other drivers. But what about the engine, you're asking? Well, the hybrid V8 derived from the 918 Spyder retains its standard race tune (which we suspect means 670 horsepower, per Balance of Performance regulations for the Hypercar class), but the mapping was changed for smoother power delivery. That sounds simple, but Porsche says that getting the powertrain to run on pump gas was 'a significant undertaking.' Porsche never implies that anything is impossible, but this must have been quite a challenge. Kevlar And Carbon Fiber Are Difficult To Paint Carbon fiber and Kevlar have similar qualities, but the latter is tougher and far more difficult to tint, so it's rarely used (or, more accurately, seen) in modern hypercars. But in racing cars, aesthetics will always take a back seat to performance and safety. Thus, most racecars are wrapped, not painted, which also allows manufacturers to get away with a rougher finish, since the goal is lightness and strength, not smoothness of surface. For a one-off road car as significant as the 963 RSP, a vinyl finish simply wouldn't do. Giving Porsche's paint specialists a chance to show off (or pull their hair out), the Paint to Sample color Martini Silver was expertly recreated according to records at the Porsche Museum, with a triple-layer lacquer encouraging Mr. Penske to use it on the road as often as possible, as intended. Disappointingly, Porsche has not revealed much of the rear of the car, but the planking/fin between the rear wing was removed to make the 963 look more like the 917. An Interior That Is Just About Liveable Inside, a lavish leather upholstery program has been carried out over the otherwise almost unchanged cabin, with the standard race wheel and dash being retained. A cupholder was fitted, and all the foam inserts were rewrapped, while the roof lining and A-pillars were retrimmed in matching light Alcantara, but there's no airbag or infotainment system. That's because, as a one-off, this received special approval from the government in France, where the 24 Hours of Le Mans is held and where the 917 Count Rossi lived. Other nods to the 917 Count Rossi include old-school Michelin logos on the tire walls, a Porsche enamel badge rather than a graphic, end plates for the ventilation system that mimic the fan atop the 917's flat-12 engine, and a bespoke toolset, as one would have expected in the gritty days of roadgoing endurance racers. We have no word on total cost, but the Le Mans racer it's based on starts at $2.9 million… About the Author Sebastian Cenizo View Profile
Auto Blog
5 hours ago
- Auto Blog
Mercedes CEO Has a Trump Tariff Deal That Could Reshape US-EU Auto Trade
Ola Källenius's comments to Der Spiegel comes as German automakers like Mercedes, BMW and Volkswagen negotiate with the Trump Administration. Tariffs have the auto industry on watch Hours before an event in Michigan on April 29, President Trump signed two executive orders aimed at reducing the impact of trade tariffs on the automotive industry. One order prevents automakers, who face 25% tariffs on auto imports, from being subject to additional levies on materials. The other order allows automakers to apply for tariff relief, which will reduce a portion of the costs associated with their imported components. However, these benefits will be gradually phased out over the next two years. Ola Källenius, CEO of the Mercedes-Benz Group, and Winfried Kretschmann, Minister President of Baden-Württemberg, stand in the production area during a tour of the Mercedes-Benz passenger car plant in Rastatt. During a rally that night in Michigan, Trump described this move as providing 'a little flexibility' to the automotive industry, hoping to persuade automakers to produce their cars and components in the United States. He said, 'We gave them a little time before we slaughter them if they don't do this. They're going to make so much money. They're going to have so many jobs.' Despite the developments, German luxury car manufacturer Mercedes-Benz withdrew its earnings guidance for 2025 during the announcement of its Q1 results. This decision was driven by uncertainty regarding the potential impact of President Trump's tariffs on imported vehicles. The company also stated that if auto tariffs remained at their current levels, it would decrease profit margins by 300 basis points on cars and 100 basis points on vans. Mercedes CEO offers some guidance on a potential tariff solution In a new interview with German business publication Der Spiegel, Mercedes-Benz CEO Ola Källenius said that while he is looking at different scenarios, the kind of investments he has to make are ones that could last for decades, rather than ones made 'in response to a volatile situation' such as the current US-EU tariff situation that is currently unfolding. Recognizing that the current administration has the impression 'that we in Europe are closed to certain issues and only demand openness where we have strengths,' the CEO proposed a deal meant to balance its imports and exports. Autoblog Newsletter Autoblog brings you car news; expert reviews and exciting pictures and video. Research and compare vehicles, too. Sign up or sign in with Google Facebook Microsoft Apple By signing up I agree to the Terms of Use and acknowledge that I have read the Privacy Policy . You may unsubscribe from email communication at anytime. 2025 Mercedes-Benz G 580 EQS — Source: Mercedes-Benz In his proposal, Källenius would allow duty-free imports of U.S.-built cars into Europe in exchange for tariff waivers on an equal number of vehicles exported by EU automakers to the U.S., adding that it would alleviate and fulfill its desire to reindustrialize and become an attractive destination for companies to set up factories for exported goods. 'For every car that leaves the USA or Europe, a car from the other side comes in duty-free,' Källenius told Spiegel. 'We have put this idea to both sides, and it is a possible component of the negotiations between the USA and the EU.' Such a solution would work for a company like Mercedes-Benz. In the same interview, Källenius noted that Mercedes 'is a major producer' of cars in the United States, adding that the company builds and sells around 350,000 vehicles in the country, which could count for consideration in trade talks. 'But the models we build and sell [in the U.S.] are not the same,' Källenius told Spiegel. 'Two-thirds of the vehicles from our plant in Tuscaloosa, Alabama, are exported to 150 countries worldwide. We therefore contribute to a more balanced trade balance for the USA. We believe this should be taken into account in the negotiations.' The team at Spartanburg that helped make the seven millionth BMW a reality. — Source: BMW Ford CEO Jim Farley proposed a similar idea Källenius's idea of rewarding U.S. exports is roughly on the same wavelength as similar ideas proposed by other automotive CEOs. Previously, Ford CEO Jim Farley raised the idea that automakers like Ford should get credit for building cars in the United States that are shipped overseas for international consumption, noting that it is 'essential' that the federal government come up with policies that encourage manufacturers to build cars for export, adding that it exports nearly as many vehicles as its brings in. 'So many of the vehicles we build here are exported around the globe,' Farley said. 'Shouldn't we get credit for that?' Around the same time Farley made those comments, the export of some high-ticket models to China, including the F-150 Raptor, Mustang, Bronco, and Lincoln Navigator, was halted due to retaliatory tariffs as high as 150% on imported vehicles. Final thoughts For what it's worth, German automakers like Volkswagen, BMW, and Mercedes-Benz have a lot of leverage for a potential U.S. tariff deal, especially if they propose that German automakers receive credits based on the number of vehicles they produce in the United States. These aren't small potatoes, either. BMW alone manufactures some of its highest-volume models, such as the BMW X3, X4, X5, X6, X7, and XM, at its Spartanburg, South Carolina, plant, which serves both U.S. and international markets. According to data from the U.S. Department of Commerce, BMW is the largest automotive exporter by value in the U.S., shipping 'more than $10 billion' of cars in 2024. American hands assemble these cars, no matter the badge or its supposed country of origin. About the Author James Ochoa View Profile
