New Chevy Corvette ZR1 Can't Stop Breaking Records
Chevrolet's upcoming C8 Corvette ZR1 has raised the performance bar yet again, setting lap records at five different race tracks across the United States. The supercharged sports car, the most powerful Corvette ever built, continues to redefine American performance standards.
The automaker confirmed that a pre-production ZR1, equipped with the ZTK Performance Package, conquered top-tier circuits with new record times, showcasing its blistering speed and precision engineering. Four Chevrolet engineers piloted the vehicle across the five courses, each securing a new fastest lap.
Bill Wise, Chevy's lead performance engineer, kicked off the record spree at Watkins Glen International in New York, where he completed the long course in 1:52.6. Brian Wallace, lead vehicle dynamics engineer, followed with a 2:08.6 run at Wisconsin's Road America. Development engineer Chris Barber then made headlines with a 1:22.8 lap at Road Atlanta. The final two records were set by global vehicle performance manager Aaron Link, who conquered Virginia International Raceway's full course in 1:47.7 and the grand course in 2:32.3.
'We knew the car had the capability, but breaking these records confirmed just how far we've pushed the C8 ZR1,' Barber said. 'It wasn't just about beating the times—it was about obliterating them.'
Powered by a 5.5-liter twin-turbocharged flat-plane-crank V-8, the ZR1 boasts an astounding 1,064 horsepower and a top speed of 233 mph, making it the fastest production Corvette ever. The ZTK package further enhances performance with a high-downforce rear wing and advanced aerodynamic elements.
Production of the C8 ZR1 is set to begin this spring, with deliveries expected later this year. The model will start at $174,995, cementing its place as a premier supercar contender.
Follow us on Facebook and Twitter
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
2 hours ago
- Yahoo
How NASCAR driver AJ Allmendinger sees Daytona's Coke Zero Sugar 400 with playoffs looming
DAYTONA BEACH — You couldn't tell if AJ Allmendinger was being serious or not. While taking groups of media members and raffle winners around the Daytona International Speedway tri-oval before a fundraiser on July 23, the NASCAR Cup Series driver hopped out of the Chevrolet Blazer pace car after each ride, greeted the next bunch and quipped as they climbed in with him. 'I'm wearing that front left tire out! That's OK. I think it's got two more laps in it.' 'Man, we're heating those brakes up! We should be all right.' The tires looked normal, even after a few rounds at 130 miles per hour. But the brake smell lingered on pit road. Later, Allmendinger broke out more (likely) sarcasm. He said his visit to Daytona a month before the Coke Zero Sugar 400 offered him an advantage. 'You know, just practicing running the top,' Allmendinger said, holding back a smile. 'It's slick out there. The old Chevy Blazer, I might try to take the shock package off that thing because that was really smooth. Might take that over to my crew chief, Trent Owens, and see what we can learn from that.' If there is an advantage to the few extra practice laps, Allmendinger will take it. Daytona's August race returns to the final week of the regular season this year. Last summer, due to a two-week Olympic break, it filled the second-to-last slot on the calendar. Translation: The Coke Zero Sugar 400 is back to being the final chance for drivers to claim one of the 16 playoff spots. Some will leave Daytona Beach happy. Many won't. 'It's going to be some action,' said Allmendinger, who is in the No. 16 Kaulig Racing Chevrolet full-time this year. 'This being the cutoff race, we're all-take now. It's not give-and-take. It's going to be all-take from everybody. It'll be a fun event.' Following the Brickyard 400 at Indianapolis Motor Speedway Sunday, there have been 13 winners, locking each of them into the postseason with four races to go. Two of those four will occur at ovals (Iowa and Richmond). The others will take place at larger wild cards (road course Watkins Glen and superspeedway Daytona). Allmendinger sits 124 points below the cutline, four spots removed from the playoffs. As a road-course specialist, he views Watkins Glen as his best chance to score a postseason-clinching victory. But if it doesn't happen there, well, enter Daytona and all the chaos that comes with it. The Coke Zero Sugar 400 is scheduled for 7:30 p.m. on Aug. 23. 'Of course, the goal is to make the playoffs,' Allmendinger said, 'but we've just got to keep getting better. We've had some really good runs. We've had some speed, I would say. At more than three quarters of the races, we've been pretty quick. We've just had some bad luck, and there are a lot of teams that can say that.'But just trying to keep getting better. If that gets us into the playoffs, great. If not, you finish the year strong and keep trying to build where our organization is at on the Cup side of it.' No joking there. This article originally appeared on The Daytona Beach News-Journal: How NASCAR driver AJ Allmendinger sees Daytona race before playoffs
Yahoo
12 hours ago
- Yahoo
Slate can still undercut Ford's $30,000 EV pickup. Here's how
When the Slate Truck was announced in April, it made some big waves in the auto industry, a business that had, by and large, abandoned small trucks. With each successive generation, stalwart workhorses like the Ford F-150 and Chevrolet Silverado gained a few fractions of an inch here, a centimeter or two there, packing on extra weight all the while. Consensus was that this was based on consumer demand, but the massive success of the Ford Maverick showed there was still interest in something smaller. The huge buzz around Slate just sealed the deal. And for good reason. Who wouldn't be excited about a small, electric pickup truck that could be had for as little as $20,000? That was an amazing initial pitch. No surprise, then, that the company quickly logged 100,000 pre-orders, but since then Slate's been taking a bit of a beating. The first was the elimination of the $7,500 federal rebate for American-made EVs, which Slate had factored into that original price tag. Suddenly that impulse-buy $20,000 truck looked a lot more expensive. The second blow came more recently, with Ford promising to launch its own electric truck priced at $30,000. How can Slate, a low-volume startup hope to beat Ford on price? It comes down to a fundamental frugality that was designed into Slate from the very beginning. Slate Truck: What is it, again? The Slate Truck is a tiny, electric, rear-wheel-drive machine. At 174.6 inches long, it's actually about six inches shorter than that iconic Ranger of the '90s. That's more than two feet shorter than a modern Maverick, yet its bed is six inches longer. It has just 201 horsepower and a range of about 150 miles, but you can add on a bigger battery pack with 90 extra miles if you need more. It seats only two by default, but here's where things get interesting: If you need room for five, the Slate converts into an SUV. You'll be able to buy a kit adding rear seats and a cover over the bed to completely change the shape and functionality of the machine. It's a Transformers-like conversion process that you can do at home with basic tools. Customization like this is a huge aspect of the Truck, which is only available in one color: slate gray. The idea is that you'll apply vinyl kits to make it look however you want. You can customize the interior as well, even 3D print your own accessories if you want, and you'll need to, because the Slate's radical simplicity is extended to extreme lengths inside. Power windows? Yeah, no, there be cranks here. There's no sound system either, nor even a touchscreen — cuts that all serve a very specific purpose. Frugal design Eliminating typically standard features like power windows and stereo systems is obviously a big part of how the engineers at Slate made the Truck as affordable as possible, but this isn't just a case of saving money by going basic. There's some multifaceted frugality going on here. Take the lack of a touchscreen, for example. There's certainly money to be saved by not including an automotive-grade display panel in the dashboard, but that's minor in the grand scheme of things. The true saving in deleting that screen is not having to develop the software to run it. Modern manufacturers spend millions building software teams to write all the applications and interfaces that run in a modern car. In the end, they wind up paying again thanks to the negative feedback they get when people have issues with those software systems. Cut the display and you not only save the cost of the screen, but the cost of the software, and the subsequent support for the software that everyone hates to use. It's those secondary and tertiary impacts that really drive down the cost of the Slate. It's the same story for the paint — or the lack thereof. Again, the Slate Truck will only be available in gray, a color provided by molded gray plastic body panels. This has big implications and cost savings. While paint itself isn't terribly expensive, the process of applying it is. Businesses spend millions of dollars building expensive paint shops adjacent to their factories, buildings that keep out the things that can ruin a paint job (dust, pollen, humidity) and keep in all the toxic fumes generated by the process. No paint? No paint shop, and no money spent to build one. There's also huge savings to be had by making those body panels out of plastic. Steel or aluminum body panels require massive, expensive stamping machines, plus giant factories to house them. By sticking with injection molding, Slate is able to build the Truck in a far smaller, more streamlined facility. To that end, the company bought a former catalog print shop, with a much smaller footprint and lower ceilings than anything a modern Ford is built beneath. Streamlined business More and more car dealers in the United States are adding a little on top of the cost of desirable cars. Euphemistically called "Market Adjustments," they're a way for seedy dealers to make a little more on a given sale. But even those dealers who don't engage in such unsavory practices are charging on average 3.9 percent on top of the cost of a car, money that goes to keeping the machines stocked with stale coffee at your local dealership. On a $30,000 car, on average, the dealer is getting a little over $1,100. That's an unfortunate premium to pay for the privilege of working through a dealer sales process that everyone hates. Slate will skip all that. The company will sell directly to you online and deliver your Truck directly, and everyone who's ever seen an infomercial knows what happens when you cut out the middleman. Challenges (and opportunities) ahead All those factors and more are fundamental to making the Slate a feasible reality, a modern truck that is admittedly bare-bones but also extremely focused on functionality and practicality. The net result is an automotive business with unprecedented leanness, a sharp contrast to a company like Tesla, which lost hundreds of millions of dollars annually nearly a decade before finally turning a profit. But that isn't to say that the road ahead is smooth for Slate. Again, the company took a major hit from President Trump's Big Beautiful Bill, which eliminated federal EV credits. That credit would have cut $7,500 from the cost of the Slate, a massive discount on such a low-cost vehicle. Indeed, what was to be a $20,000 truck is now marketed as "priced in the mid-twenties." Regardless of your budget, that's a painful increase. There's also the increasing uncertainty within the EV market. Sales of battery-powered machines are still increasing, up 1.5 percent in the first half of 2025 over the first half of 2024, and they're expected to soar in the third quarter ahead of the federal incentive disappearing. After that, demand is sure to wane at least for the short-term, and it's anyone's guess what happens next year. But the biggest challenge ahead comes from Blue Oval. Ford hasn't released all the details of its upcoming, $30,000 electric truck, except to say it'll be roughly Maverick sized and won't skimp on standard features like touchscreens and stereo speakers. So, a full-featured electric from Ford or a smaller, leaner machine from an unproven startup for a few thousand less? That's a tough sell, but Slate does have the first-mover advantage, pledging to launch its Truck in 2026, with Ford's aiming to arrive in 2027. Also, Slate's embracing of the DIY community could earn it enough die-hard adherents to build a tasty business. After all, if Slate can capture even a tiny fraction of Ford's truck market, that would be a huge win. Slate's success is far from guaranteed, but its fundamentally lean structure and focus mean that I'm not giving up on it yet. I'm also more than a little hopeful that the Slate Truck's potential success could lead to a more comprehensive rethinking about what American consumers really want, and how big their vehicles really need to be.
USA Today
18 hours ago
- USA Today
Mysterious 1955 Chrysler Falcon concept car makes rare appearance. Is it the only one left?
A lovely and legendary car shrouded in mystery, the 1955 Chrysler Falcon made a rare public appearance Sunday, Aug. 17, at the Pebble Beach Concours d'Elegance classic car show in California. The elegant Falcon was conceived to elbow Chrysler into the spotlight shining on the new and exciting Chevrolet Corvette and Ford Thunderbird, graceful two-seaters drawing acclaim and buyers to Chrysler's crosstown rivals in Detroit. 'The car is significant as a window into what might have been if Chrysler had decided to match the Corvette and Thunderbird with a two-seater of its own,' said Matt Anderson, transportation curator at The Henry Ford museum in Dearborn, Michigan. 'The Falcon blended the sportiness of the Corvette with the personal luxury of the T-Bird quite well. 'Whether there was a market for that mix, we'll never know.' The Chrysler Falcon is part of the Bortz Auto Collection of concept cars preserved by enthusiast Joe Bortz. His cars are not permanently displayed anywhere, but make the rounds of leading museums and auto events. The Chrysler Falcon is unrelated to the 1960s Ford compact sedan of the same name. Off-the-shelf parts Chrysler styling lost its edge when it resumed passenger-vehicle production after World War II. Chairman J.T. Keller charged design chief Virgil Exner with revitalizing the brand. Exner enlisted Italian coachbuilder and designer Ghia to build what he called his 'idea cars.' The string of concept cars for Chrysler included the K-310, Norseman and Imperial Crown. They were one-off projects, show cars designed to fire the imagination, not for production and sale. 'The Falcon changed that,' Stellantis historian Brandt Rosenbusch told me. 'It was conceived to compete with the Corvette and Thunderbird, so it used off-the-shelf parts for easy production.' That included a shortened 1955 Chrysler 300 chassis ― 105 inches long, 11 inches less than the production sedan. Other production features included a Hemi V8 and power steering, brakes and windows. The car is drivable.'It's a stunning car. The proportions are perfect,' Bortz said. 'It's unusual for its time because it had so little chrome.' But committing to produce the low, graceful Falcon was too much to ask of a chairman who once declared every Chrysler's roof must be high enough that a gentleman could wear his hat while driving. The car never made it to the assembly line. Nobody's entirely certain how many Ghia's old-world workshop in Turin built. It was once believed Ghia built only one Falcon, but we know now there were at least two. Maybe three, according to a Ghia memo citing a build order from Chrysler. Where can I see the 1955 Chrysler Falcon concept? Somehow, they vanished Supporting the three-car theory, Chrysler archives have photos of Falcons in three different colors: 'There's a lot of guesswork,' Bortz said. The Falcon was first shown to the public in New York in August 1955, alongside Chrysler's Flight Sweep I and II concept cars. Nobody knows what happened to the Flight Sweeps. Many early concept cars were sold to private buyers and driven till they died. The Falcon lived on. Its grille inspired the 1998 Chrysler Chronos concept car and the sensational 2005 Chrysler 300. The car will be on the 18th fairway at Pebble Beach this year, one of several Exner cars that are part of a tribute to Chrysler's centennial. Bortz will display it with the convertible top up, a seldom seen configuration. 'Exner will always be remembered for the 'Forward Look' Chryslers of the late 1950s,' Anderson said. 'Those cars absolutely remade the company's image from old fashioned to cutting edge. 'The 1957 ad campaign said it best: 'Suddenly it's 1960!' 'While he didn't invent the tailfin, Exner employed it to greater effect than any of his contemporaries.' The Falcon 'was considered Exner's finest car,' Bortz said. 'He kept a model on his desk.' 1955 Chrysler Falcon at a glance Built in Turin by Carrozerria Ghia SpA Wheelbase: 105 inches Length: 182 inches Width: '68½ inches' Height: '51 1/8 inches' Engine: 'Special Chrysler Corp. V8 hemispherical combustion chamber Tires: 15-inch From Chrysler's description: Interior: Source: Stellantis archives Contact Mark Phelan: mmphelan@ Follow him on Twitter @mark_phelan. Read more on autos and sign up for our autos newsletter. Become a subscriber.
