IISER Tirupati to hold 6th convocation, 255 students to graduate
In the run-up to the ceremony, IISER Tirupati Director Prof Santanu Bhattacharya addressed the media on Sunday, highlighting the institute's significant achievements and rapid progress since its inception a decade ago.
Established in 2015 with a single BS-MS programme, the institute has since expanded into a broad spectrum of academic offerings. These include Integrated PhD and Post-Doctoral Research programmes.
This year, the institute is introducing a new four-year BSc in Economics and Statistical Sciences (BS-ESS) and a two-year MS (Masters by Research) programme, signalling a step further in its commitment to interdisciplinary education and research. Prof Bhattacharya noted the institute's growing academic footprint, pointing to its current H-index of 57, with over 17,000 cumulative citations of research publications. He also reported a substantial increase in extramural research funding, which doubled over the previous year to reach Rs 29.43 crore. Several faculty members have received prestigious accolades, including the RSC-ChemComm's Pioneering Investigators recognition, the DAAD Experienced Researcher Award, and the ASEAN-India R&D Project.
Among its most notable recent accomplishments, Dr Chitrasen Jena from IISER Tirupati was part of the team awarded the 2025 Breakthrough Prize in Fundamental Physics, one of the most prestigious global science honours. Also, eight faculty members from the institute have been named in the top 2% of the world's most influential scientists, according to a global database compiled by Stanford University.
The director also underlined the institute's growing international profile through strategic collaborations. Partnerships have been forged with leading global institutions such as the University of Melbourne, Heidelberg University, and the University of Cologne. IISER Tirupati is also participating in the Future Research Talent (FRT) programme in collaboration with the Australian National University (ANU).
Prof Bhattacharya stated that the institute is now fully operational, with major infrastructure completed, and further expansion is on the horizon with the backing of the Ministry of Education and the Government of Andhra Pradesh.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Time of India
5 hours ago
- Time of India
IISER Pune & IITB researchers find method to create metal nanoparticles to power disease detectors
Pune: Just like a drop of water on a heated pan turns into tiny droplets, perfectly sized metal dots can be made from a thin layer of a metal. When heated between two surfaces, it breaks into extremely tiny, uniform nanoparticles. Researchers from Indian Institute of Science Education and Research (IISER), Pune, and Indian Institute of Technology (IIT) Bombay have discovered this new method called confined dewetting which brings advanced nanotechnology closer to practical, everyday solutions. Their breakthrough can be applied to build sensors using many metals and surfaces, opening doors for use in medicine, environment monitoring, and industrial quality control. You Can Also Check: Pune AQI | Weather in Pune | Bank Holidays in Pune | Public Holidays in Pune Published in the journal Small Methods, the study shows how this simple, cost-effective process can create high-quality metal nanoparticles for use in highly sensitive sensors which can detect diseases early or find traces of chemicals in the environment. One of the paper's principal investigators Atikur Rahman said the study provides a theoretical framework explaining how the elasticity and low surface tension of PDMS (a flexible, silicone-based material) reduce particle size and enhance uniformity, offering a blueprint for further advancements using similar materials. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Why Your Current Make-Up Routine Might Be Aging You Learn More Undo He added, "With applications ranging from medical diagnostics to chemical analysis and beyond, this breakthrough positions confined dewetting as a game-changer in nanotechnology." The study, led by Ayesha Rahman, a research scientist at I-Hub Quantum Technology Foundation hosted by IISER Pune, Anirban Sain, a faculty member at the Department of Physics, IIT Bombay , and Atikur Rahman, a faculty in the department of physics, IISER Pune, introduced a simple approach to create uniform, high-density metal nanoparticles on various surfaces, including flat, curved, and microtextured substrates. Rahman added, "The technique can be applied to a variety of substrates, from glass slides to optical fibres. The PDMS (a flexible, silicone-based material) layer shapes the nanoparticles and protects them from oxidation. This results in pure and stable nanoparticles. These properties are important when using the sensing technology in practice." The study received funding from National Mission on Interdisciplinary Cyber-Physical Systems in the department of science and technology (DST) through the I-HUB Quantum Technology Foundation, hosted by IISER Pune, and from a DST-SERB grant. The high level of precision enables the detection of ultra-low concentrations of disease biomarkers such as cancer-related proteins in a patient's blood sample, or minute traces of harmful pollutants like lead in drinking water, paving the way for earlier diagnostics and more effective environmental monitoring. What is Confined Dewetting? Imagine a super-thin layer of metal, about 10,000 times thinner than a human hair, like a gold film spread on a piece of glass When you heat it, the metal starts to bunch into tiny droplets, similar to how water beads up on a non-sticky pan This happens because the metal tries to minimise its surface energy If we squeeze the metal film between two surfaces, like making a sandwich, and apply heat, it breaks up into tiny, uniform droplets that are packed closely together This process is called confined dewetting, and it can be used to make highly sensitive sensors for biomedical and chemical applications How is it done The researchers sandwiched a thin metal film between a substrate and a layer of PDMS (a flexible, silicone-based material) during heating They achieved precise control over the size and spacing of nanoparticles, resulting in particles with minimal size variation and gaps as small as a few nanometres This level of precision is critical for applications requiring consistent and enhanced performance, such as detecting trace amounts of biological or chemical substances Traditional methods of nanoparticle production are based on expensive and complex processes and often do not produce uniform nanoparticles In contrast, the 'confined dewetting' technique, applied on metal films is versatile and can be implemented on a large scale Metals such as silver, gold, copper, and their alloys can be used in this technique, the study said
Time of India
5 hours ago
- Time of India
ISRO honour for JU lunar rover
1 2 3 4 5 6 Kolkata: A 10-member Jadavpur University (JU) team, Obseract, has competed with over a 1,000 teams to rank 5th in the ISRO Robotics Challenge-2024 for designing and operating an autonomous robotic vehicle (rover) that can traverse tough terrains like the lunar surface and execute diverse tasks within a simulated extraterrestrial setting. The team, comprising students, researchers and their mentors, received the trophy on July 25 at the U R Rao Satellite Centre, Bengaluru. The contest assigned robotic tasks inspired by Chandrayaan-4 problem statements. Out of 1,008 team, 273 proposals qualified. Obseract was among the 10 teams selected to attend the final challenge round in Bengaluru in 2023. The results were declared in Aug 2024. The team is now preparing for NIDAR 2025 and International Robotics Challenge 2026. The 42kg 6-wheeled rover is worth about Rs 2.7lakh. Its arm is capable of picking up 200gm samples. It can rotate 360° rotation around a single point without taking much space. The rover has a runtime of 9 hours on simple terrain and 4 hours during heavy use of its manipulator arm. Alumni of the1984 batch of the mechanical engineering department, besides others funded the project.
Indian Express
8 hours ago
- Indian Express
Researchers at IISER Pune, IIT-B develop innovative method to produce high-quality metal nanoparticles
Researchers from the Indian Institute of Science Education and Research (IISER), Pune and the Indian Institute of Technology-Bombay have developed an innovative, cost-effective method to produce high-quality metal nanoparticles. In a new study published in the journal Small Methods, the researchers said this technique, known as confined dewetting, could have wide applications in biomedical diagnostics and chemical detection by enabling highly sensitive and reliable sensors. The study, led by Dr Ayesha Rahman (research scientist at I-Hub Quantum Technology Foundation hosted by IISER, Pune), Prof Anirban Sain (faculty member at the department of physics, IIT-Bombay), and Dr Atikur Rahman (faculty member at the department of physics, IISER, Pune), introduces a simple yet powerful approach to create uniform, high-density metal nanoparticles on various surfaces, including flat, curved and microtextured substrates. Simply put, a super-thin (about 10,000 times thinner than a human hair) layer of metal, like gold film spread on a piece of glass. When heated, the metal starts to bunch into tiny droplets as the metal tries to minimise its surface energy. The study authors explained that if the metal film is squeezed between two surfaces and heat is applied, it breaks up into tiny, uniform droplets that are packed closely together. 'This process is called confined dewetting, and it can be used to make highly sensitive sensors for biomedical and chemical applications,' they said. By sandwiching a thin metal film between a substrate and a layer of PDMS (a flexible, silicone-based material) during heating, the researchers achieved precise control over the size and spacing of nanoparticles, resulting in particles with minimal size variation and gaps as small as a few nanometers. 'This level of precision is critical for applications requiring consistent and enhanced performance, such as detecting trace amounts of biological or chemical substances,' the authors said in the report. Traditional methods of nanoparticle production are based on expensive and complex processes and often do not produce uniform nanoparticles. The researchers anticipate that this capability could enable earlier detection of diseases through biomarkers or identify minute traces of chemicals in environmental or industrial settings. Speaking on the potential applications of this new method, Dr Rahman said, 'With applications ranging from medical diagnostics to chemical analysis and beyond, confined dewetting is a game-changer in nanotechnology.'
